# |___/ #
# #
##################################||####################################
- #||#
+ #||#
##################################||####################################
# #
# This is an example of the config file for InspIRCd. #
#<include executable="/path/to/executable parameters"> #
# #
# Executable include example: #
-#<include executable="/usr/bin/wget -q -O - http://mynet.net/inspircd.conf">
+#<include executable="/usr/bin/wget -q -O - http://example.com/inspircd.conf">
# #
<server
# name: Hostname of your server. Does not need to resolve, but
# does need to be correct syntax (something.somethingelse.tld).
- name="penguin.omega.org.za"
+ name="penguin.omega.example.org"
# description: Server description. Spaces are allowed.
description="Waddle World"
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# If you want to link servers to InspIRCd you must load the #
-# m_spanningtree.so module! Please see the modules list for #
+# spanningtree module! Please see the modules list for #
# information on how to load this module! If you do not load this #
# module, server ports will NOT work! #
# to this bind section.
type="clients"
- # ssl: If you want this bind section to use SSL, define either
- # gnutls or openssl here. The appropriate SSL modules must be loaded
- # for ssl to work. If you do not want this bind section to support ssl,
- # just remove or comment out this option.
+ # ssl: If you want the port(s) in this bind tag to use SSL, set this
+ # to either "gnutls" or "openssl". The appropriate SSL module must be
+ # loaded for SSL to work. If you do not want the port(s) in this bind
+ # tag to support SSL, just remove or comment out this option.
ssl="gnutls"
# defer: When this is non-zero, connections will not be handed over to
# When linking servers, the OpenSSL and GnuTLS implementations are completely
# link-compatible and can be used alongside each other
# on each end of the link without any significant issues.
-# Supported ssl types are: "openssl" and "gnutls".
-# You must load, m_ssl_openssl for OpenSSL or m_ssl_gnutls for GnuTLS.
+# Supported SSL types are: "openssl" and "gnutls".
+# You must load the ssl_openssl module for OpenSSL or ssl_gnutls for GnuTLS.
<bind address="" port="7000,7001" type="servers">
<bind address="1.2.3.4" port="7005" type="servers" ssl="openssl">
#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
# #
# You can configure the passwords here which you wish to use for #
-# the /DIE and /RESTART commands. Only trusted IRCop's who will #
+# the /DIE and /RESTART commands. Only trusted ircops who will #
# need this ability should know the die and restart password. #
# #
<power
# hash: what hash these passwords are hashed with.
- # Requires the module for selected hash (m_md5.so, m_sha256.so
- # or m_ripemd160.so) be loaded and the password hashing module
- # (m_password_hash.so) loaded.
+ # Requires the module for selected hash (md5, sha256, or
+ # ripemd160) be loaded and the password hashing module
+ # (password_hash) loaded.
# Options here are: "md5", "sha256" and "ripemd160", or one of
# these prefixed with "hmac-", e.g.: "hmac-sha256".
# Optional, but recommended. Create hashed passwords with:
allow="203.0.113.*"
# hash: what hash this password is hashed with. requires the module
- # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
- # loaded and the password hashing module (m_password_hash.so)
- # loaded. Options here are: "md5", "sha256" and "ripemd160".
+ # for selected hash (md5, sha256 or ripemd160) be loaded and the
+ # password hashing module (password_hash) loaded.
# Optional, but recommended. Create hashed passwords with:
# /mkpasswd <hash> <password>
#hash="sha256"
# globalmax: Maximum global (network-wide) connections per IP (or CIDR mask, see below).
globalmax="3"
- # maxconnwarn: Enable warnings when localmax or globalmax is hit (defaults to on)
+ # maxconnwarn: Enable warnings when localmax or globalmax are reached (defaults to on)
maxconnwarn="off"
# resolvehostnames: If disabled, no DNS lookups will be performed on connecting users
resolvehostnames="yes"
# usednsbl: Defines whether or not users in this class are subject to DNSBL. Default is yes.
- # This setting only has effect when m_dnsbl is loaded.
+ # This setting only has effect when the dnsbl module is loaded.
#usednsbl="yes"
# useident: Defines if users in this class MUST respond to a ident query or not.
limit="5000"
# modes: Usermodes that are set on users in this block on connect.
- # Enabling this option requires that the m_conn_umodes module be loaded.
+ # Enabling this option requires that the conn_umodes module be loaded.
# This entry is highly recommended to use for/with IP Cloaking/masking.
- # For the example to work, this also requires that the m_cloaking
+ # For the example to work, this also requires that the "cloaking"
# module be loaded as well.
modes="+x"
# requireident, requiressl, requireaccount: require that users of this
# block have a valid ident response, use SSL, or have authenticated.
- # Requires m_ident, m_sslinfo, or m_services_account respectively.
+ # Requires ident, sslinfo, or the services_account module, respectively.
requiressl="on"
# NOTE: For requireaccount, you must complete the signon prior to full
# connection. Currently, this is only possible by using SASL
limit="5000"
# modes: Usermodes that are set on users in this block on connect.
- # Enabling this option requires that the m_conn_umodes module be loaded.
+ # Enabling this option requires that the conn_umodes module be loaded.
# This entry is highly recommended to use for/with IP Cloaking/masking.
- # For the example to work, this also requires that the m_cloaking
+ # For the example to work, this also requires that the cloaking
# module be loaded as well.
modes="+x">
# server: DNS server to use to attempt to resolve IP's to hostnames.
# in most cases, you won't need to change this, as inspircd will
# automatically detect the nameserver depending on /etc/resolv.conf
- # (or, on windows, your set nameservers in the registry.)
+ # (or, on Windows, your set nameservers in the registry.)
# Note that this must be an IP address and not a hostname, because
# there is no resolver to resolve the name until this is defined!
#
# matched, the banlist size defaults to 64 entries. #
# #
-<banlist chan="#morons" limit="128">
+<banlist chan="#largechan" limit="128">
<banlist chan="*" limit="69">
#-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# triggers anti-takeover mechanisms of some obsolete bots.
cyclehostsfromuser="no"
- # ircumsgprefix: Use undernet-style message prefixing for NOTICE and
- # PRIVMSG. If enabled, it will add users' prefix to the line, if not,
- # it will just message the user normally.
- ircumsgprefix="no"
-
# announcets: If set to yes, when the timestamp on a channel changes, all users
# in the channel will be sent a NOTICE about it.
announcets="yes"
# allowmismatch: Setting this option to yes will allow servers to link even
# if they don't have the same "optionally common" modules loaded. Setting this to
- # yes may introduce some desyncs and weirdness.
+ # yes may introduce some desyncs and unwanted behaviour.
allowmismatch="no"
# defaultbind: Sets the default for <bind> tags without an address. Choices are
# somaxconn: The maximum number of connections that may be waiting
# in the accept queue. This is *NOT* the total maximum number of
# connections per server. Some systems may only allow this to be up
- # to 5, while others (such as linux and *BSD) default to 128.
+ # to 5, while others (such as Linux and *BSD) default to 128.
# Setting this above the limit imposed by your OS can have undesired
# effects.
somaxconn="128"
# higher ranked users. This is the recommended setting.
announceinvites="dynamic"
- # hidemodes: If enabled, then the listmodes given will be hidden
- # from users below halfop. This is not recommended to be set on +b
- # as it may break some functionality in popular clients such as mIRC.
- hidemodes="eI"
-
# hideulines: If this value is set to yes, U-lined servers will
# be hidden from non-opers in /links and /map.
hideulines="no"
# - OPER - succesful and failed oper attempts
# - KILL - kill related messages
# - snomask - server notices (*all* snomasks will be logged)
-# - FILTER - messages related to filter matches (m_filter)
+# - FILTER - messages related to filter matches (filter module)
# - CONFIG - configuration related messages
# - COMMAND - die and restart messages, and messages related to unknown user types
# - SOCKET - socket engine informational/error messages
<badhost
# host: ident@hostname to ban.
# Wildcards and CIDR (if you specify an IP) can be used.
- host="*@hundredz.n.hundredz.o.1337.kiddies.example.net"
+ host="*@banneduser.example.net"
# reason: Reason to display when user is disconnected
- reason="Too many 1337 kiddiots">
+ reason="Evading Bans">
<badhost host="root@*" reason="Don't IRC as root!">
<badhost host="*@198.51.100.0/24" reason="This subnet is bad.">
# #
# You should already know what to do here :) #
-<die value="User error. Insert new user and press any key. (you didn't edit your config properly.)">
+<die value="User error. You didn't edit your config properly. Go back and try again.">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ____ _ _____ _ _ ____ _ _ _ #