# ssl: If you want the port(s) in this bind tag to use SSL, set this to
# the name of a custom <sslprofile> tag that you have defined or one
# of "openssl", "gnutls", "mbedtls" if you have not defined any. See the
- # wiki page for the SSL module you are using for more details.
+ # docs page for the SSL module you are using for more details.
#
# You will need to load the ssl_openssl module for OpenSSL, ssl_gnutls
# for GnuTLS and ssl_mbedtls for mbedTLS.
# module).
#<bind address="" port="7002" type="clients" hook="websocket">
+# EXPERIMENTAL: Listener that binds on a UNIX endpoint instead of a TCP/IP endpoint:
+#<bind path="/tmp/inspircd.sock" type="clients">
+
# You can define a custom <sslprofile> tag which defines the SSL configuration
-# for this listener. See the wiki page for the SSL module you are using for
+# for this listener. See the docs page for the SSL module you are using for
# more details.
#
# Alternatively, you can use one of the default SSL profiles which are created
# -- It is important to note that connect tags are read from the -- #
# TOP DOWN. This means that you should have more specific deny #
# and allow tags at the top, progressively more general, followed #
-# by a <connect allow="*" (should you wish to have one). #
+# by a <connect allow="*"> (should you wish to have one). #
# #
# Connect blocks are searched twice for each user - once when the TCP #
# connection is accepted, and once when the user completes their #
allow="203.0.113.*"
# hash: the hash function this password is hashed with. Requires the
- # module for the selected function (bcrypt, md5, sha1, sha256, or
- # ripemd160) and the password hashing module (password_hash) to be
- # loaded.
+ # module for the selected function (bcrypt, md5, sha1, or sha256) and
+ # the password hashing module (password_hash) to be loaded.
+ #
# You may also use any of the above other than bcrypt prefixed with
# either "hmac-" or "pbkdf2-hmac-" (requires the pbkdf2 module).
- # Create hashed passwords with: /mkpasswd <hash> <password>
+ # Create hashed passwords with: /MKPASSWD <hashtype> <plaintext>
#hash="bcrypt"
# password: Password to use for this block/user(s)
# timeout: How long the server will wait before disconnecting
# a user if they do not do anything on connect.
# (Note, this is a client-side thing, if the client does not
- # send /nick, /user or /pass)
- timeout="10"
+ # send /NICK, /USER or /PASS)
+ timeout="20"
# localmax: Maximum local connections per IP (or CIDR mask, see below).
localmax="3"
# limit: How many users are allowed in this class
limit="5000"
- # modes: Usermodes that are set on users in this block on connect.
+ # modes: User modes that are set on users in this block on connect.
# Enabling this option requires that the conn_umodes module be loaded.
- # This entry is highly recommended to use for/with IP Cloaking/masking.
- # For the example to work, this also requires that the "cloaking"
+ # This entry is highly recommended to use for/with IP cloaking/masking.
+ # For the example to work, this also requires that the cloaking
# module be loaded as well.
modes="+x"
- # requireident, requiressl, requireaccount: require that users of this
- # block have a valid ident response, use SSL, or have authenticated.
- # Requires ident, sslinfo, or the services_account module, respectively.
- requiressl="on"
- # NOTE: For requireaccount, you must complete the signon prior to full
- # connection. Currently, this is only possible by using SASL
- # authentication; passforward and PRIVMSG NickServ happen after
- # your final connect block has been found.
+ # requireident: Require that users of this block have a valid ident response.
+ # Requires the ident module to be loaded.
+ #requireident="yes"
+
+ # requiressl: Require that users of this block use an SSL connection.
+ # This can also be set to "trusted", as to only accept certificates
+ # issued by a certificate authority that you can configure in the
+ # settings of the SSL module that you're using.
+ # Requires the sslinfo module to be loaded.
+ #requiressl="yes"
+
+ # requireaccount: Require that users of this block have authenticated to a
+ # services account.
+ # NOTE: You must complete the signon prior to full connection. Currently,
+ # this is only possible by using SASL authentication; passforward
+ # and PRIVMSG NickServ happen after your final connect block has been found.
+ # Requires the services_account module to be loaded.
+ #requireaccount="yes"
# Alternate MOTD file for this connect class. The contents of this file are
# specified using <files secretmotd="filename"> or <execfiles ...>
# Italic: \i
# Monospace: \m (not widely supported)
# Reset: \x
+ # Reverse: \r
# Strikethrough: \s (not widely supported)
# Underline: \u
# See https://defs.ircdocs.horse/info/formatting.html for more information
# timeout: How long the server will wait before disconnecting
# a user if they do not do anything on connect.
# (Note, this is a client-side thing, if the client does not
- # send /nick, /user or /pass)
- timeout="10"
+ # send /NICK, /USER or /PASS)
+ timeout="20"
# pingfreq: How often the server tries to ping connecting clients.
pingfreq="2m"
# softsendq: amount of data in a client's send queue before the server
# begins delaying their commands in order to allow the sendq to drain
- softsendq="8192"
+ softsendq="10240"
# recvq: amount of data allowed in a client's queue before they are dropped.
- # Entering "8K" is equivalent to "8192", see above.
- recvq="8K"
+ # Entering "10K" is equivalent to "10240", see above.
+ recvq="10K"
# threshold: This specifies the amount of command penalty a user is allowed to have
# before being quit or fakelagged due to flood. Normal commands have a penalty of 1,
# limit: How many users are allowed in this class
limit="5000"
- # modes: Usermodes that are set on users in this block on connect.
+ # modes: User modes that are set on users in this block on connect.
# Enabling this option requires that the conn_umodes module be loaded.
- # This entry is highly recommended to use for/with IP Cloaking/masking.
+ # This entry is highly recommended to use for/with IP cloaking/masking.
# For the example to work, this also requires that the cloaking
# module be loaded as well.
modes="+x">
#<pid file="/path/to/inspircd.pid">
-#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+#-#-#-#-#-#-#-#-#-#-#-#-#- LIST MODE LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Use these tags to customise the ban limits on a per channel basis. #
-# The tags are read from top to bottom, and any tag found which #
-# matches the channels name applies the banlimit to that channel. #
+# The <maxlist> tag is used customise the maximum number of each list #
+# mode that can be set on a channel. #
+# The tags are read from top to bottom and the list mode limit from #
+# the first tag found which matches the channel name and mode type is #
+# applied to that channel. #
# It is advisable to put an entry with the channel as '*' at the #
-# bottom of the list. If none are specified or no maxbans tag is #
+# bottom of the list. If none are specified or no maxlist tag is #
# matched, the banlist size defaults to 100 entries. #
# #
-<banlist chan="#largechan" limit="200">
-<banlist chan="*" limit="100">
-
-#-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# This tag is optional, and specifies one or more features which are #
-# not available to non-operators. #
-# #
-# For example you may wish to disable NICK and prevent non-opers from #
-# changing their nicknames. #
-# Note that any disabled commands take effect only after the user has #
-# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
-# so for example disabling NICK will not cripple your network. #
-# #
-# You can also define if you want to disable any channelmodes #
-# or usermodes from your users. #
-# #
-# `fakenonexistant' will make the ircd pretend that nonexistant #
-# commands simply don't exist to non-opers ("no such command"). #
-# #
-#<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Just remove this... Its here to make you read ALL of the config #
-# file options ;) #
-
-<die value="You should probably edit your config *PROPERLY* and try again.">
+# Allows #largechan to have up to 200 ban entries.
+#<maxlist mode="ban" chan="#largechan" limit="200">
+# Allows #largechan to have up to 200 ban exception entries.
+#<maxlist mode="e" chan="#largechan" limit="200">
+# Allows all channels and list modes not previously matched to have
+# up to 100 entries.
+<maxlist chan="*" limit="100">
#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# exemptchanops: Allows users with with a status mode to be exempt
# from various channel restrictions. Possible restrictions are:
+ # - anticaps Channel mode +B - blocks messages with too many capital
+ # letters (requires the anticaps module).
# - auditorium-see Permission required to see the full user list of
# a +u channel (requires the auditorium module).
# - auditorium-vis Permission required to be visible in a +u channel
# See m_exemptchanops in modules.conf.example for more details.
exemptchanops="censor:o filter:o nickflood:o nonick:v regmoderated:o"
- # invitebypassmodes: This allows /invite to bypass other channel modes.
+ # invitebypassmodes: This allows /INVITE to bypass other channel modes.
# (Such as +k, +j, +l, etc.)
invitebypassmodes="yes"
# Default value is true
clonesonconnect="true"
+ # timeskipwarn: The time period that a server clock can jump by before
+ # operators will be warned that the server is having performance issues.
+ timeskipwarn="2s"
+
# quietbursts: When syncing or splitting from a network, a server
# can generate a lot of connect and quit messages to opers with
# +C and +Q snomasks. Setting this to yes squelches those messages,
announceinvites="dynamic"
# hideulines: If this value is set to yes, U-lined servers will
- # be hidden from non-opers in /links and /map.
+ # be hidden from non-opers in /LINKS and /MAP.
hideulines="no"
- # flatlinks: If this value is set to yes, /map and /links will
+ # flatlinks: If this value is set to yes, /MAP and /LINKS will
# be flattened when shown to non-opers.
flatlinks="no"
# when a remote whois (/WHOIS <nick> <nick>) is used.
#hideserver="*.example.com"
- # hidebans: If this value is set to yes, when a user is banned ([gkz]lined)
+ # hidebans: If this value is set to yes, when a user is banned ([KGZ]-lined)
# only opers will see the ban message when the user is removed
# from the server.
hidebans="no"
- # hidekills: If defined, replaces who set a /kill with a custom string.
+ # hidekills: If defined, replaces who executed a /KILL with a custom string.
hidekills=""
# hideulinekills: Hide kills from clients of ulined servers from server notices.
hidesplits="no"
# maxtargets: Maximum number of targets per command.
- # (Commands like /notice, /privmsg, /kick, etc)
+ # (Commands like /NOTICE, /PRIVMSG, /KICK, etc)
maxtargets="20"
# customversion: A custom message to be displayed in the comments field
# restrictbannedusers: If this is set to yes, InspIRCd will not allow users
# banned on a channel to change nickname or message channels they are
- # banned on.
+ # banned on. This can also be set to silent to restrict the user but not
+ # notify them.
restrictbannedusers="yes"
# genericoper: Setting this value to yes makes all opers on this server
- # appear as 'is an IRC operator' in their WHOIS, regardless of their
+ # appear as 'is a server operator' in their WHOIS, regardless of their
# oper type, however oper types are still used internally. This only
# affects the display in WHOIS.
genericoper="no"
- # userstats: /stats commands that users can run (opers can run all).
+ # userstats: /STATS commands that users can run (opers can run all).
userstats="Pu">
#-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
# maxkick: Maximum length of a kick message.
maxkick="255"
- # maxgecos: Maximum length of a real name (gecos).
- maxgecos="128"
+ # maxreal: Maximum length of a real name.
+ maxreal="128"
# maxaway: Maximum length of an away message.
maxaway="200">
#
# An example log tag would be:
# <log method="file" type="OPER" level="default" target="opers.log">
-# which would log all information on /oper (failed and successful) to
+# which would log all information on /OPER (failed and successful) to
# a file called opers.log.
#
# There are many different types which may be used, and modules may
# - USERS - information relating to user connection and disconnection
# - OPER - succesful and failed oper attempts
# - KILL - kill related messages
-# - snomask - server notices (*all* snomasks will be logged)
# - FILTER - messages related to filter matches (filter module)
# - CONFIG - configuration related messages
# - COMMAND - die and restart messages, and messages related to unknown user types
#-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# This tag lets you define the behaviour of the /whowas command of #
+# This tag lets you define the behaviour of the /WHOWAS command of #
# your server. #
# #
<whowas
# groupsize: Maximum entries per nick shown when performing
- # a /whowas nick.
+ # a /WHOWAS <nick>.
groupsize="10"
# maxgroups: Maximum number of nickgroups that can be added to
- # the list so that /whowas does not use a lot of resources on
+ # the list so that /WHOWAS does not use a lot of resources on
# large networks.
maxgroups="100000"
# nick: Nick to disallow. Wildcards are supported.
nick="ChanServ"
- # reason: Reason to display on /nick.
+ # reason: Reason to display on /NICK.
reason="Reserved for a network service">
<badhost
<badhost host="root@*" reason="Don't IRC as root!">
<badhost host="*@198.51.100.0/24" reason="This subnet is bad.">
-# exception: Hosts that are exempt from [kgz]lines.
+# exception: Hosts that are exempt from [KGZ]-lines.
<exception
# host: ident@hostname to exempt.
# Wildcards and CIDR (if you specify an IP) can be used.
- host="*@ircop.example.com"
+ host="*@serverop.example.com"
- # reason: Reason for exception. Only shown in /stats e
+ # reason: Reason for exception. Only shown in /STATS e.
reason="Oper's hostname">
#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# This optional tag allows you to specify how wide a gline, eline, #
-# kline, zline or qline can be before it is forbidden from being #
-# set. By setting hostmasks="yes", you can allow all G, K, E lines, #
+# This optional tag allows you to specify how wide a G-line, E-line, #
+# K-line, Z-line or Q-line can be before it is forbidden from being #
+# set. By setting hostmasks="yes", you can allow all G-, K-, E-lines, #
# no matter how many users the ban would cover. This is not #
-# recommended! By setting ipmasks="yes", you can allow all Z lines, #
+# recommended! By setting ipmasks="yes", you can allow all Z-lines, #
# no matter how many users these cover too. Needless to say we #
# don't recommend you do this, or, set nickmasks="yes", which will #
-# allow any qline. #
+# allow any Q-line. #
# #
<insane
# will be banning 955 or more users.
trigger="95.5">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# You should already know what to do here :) #
-
-<die value="User error. You didn't edit your config properly. Go back and try again.">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
projects / user / henk / code / inspircd.git / blobdiff