# #
# By default, ALL modules are commented out. You must uncomment them #
# or add lines to your config to load modules. Please refer to #
-# https://wiki.inspircd.org/2.0/Modules for a list of modules and #
+# https://docs.inspircd.org/3/modules for a list of modules and #
# each modules link for any additional conf tags they require. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
-# To link servers to InspIRCd, you MUST load the m_spanningtree #
-# module. If you don't do this, server links will NOT work at all. #
+# To link servers to InspIRCd, you MUST load the spanningtree module. #
+# If you don't do this, server links will NOT work at all. #
# This is by design, to allow for the implementation of other linking #
# protocols in modules in the future. This module is at the bottom of #
# this file. #
# cryptographic uses and security.
#
# IMPORTANT:
-# Other modules such as m_cloaking.so and m_password_hash.so may rely on
+# Other modules such as cloaking and password_hash may rely on
# this module being loaded to function.
#
-#<module name="m_md5.so">
-#
+#<module name="md5">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SHA256 module: Allows other modules to generate SHA256 hashes,
# usually for cryptographic uses and security.
#
# IMPORTANT:
-# Other modules such as m_password_hash.so may rely on this module being
-# loaded to function. Certain modules such as m_spanningtree.so will
+# Other modules such as password_hash may rely on this module being
+# loaded to function. Certain modules such as spanningtree will
# function without this module but when it is loaded their features will
# be enhanced (for example the addition of HMAC authentication).
#
-#<module name="m_sha256.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# RIPEMD160 module: Allows other modules to generate RIPEMD160 hashes,
-# usually for cryptographic uses and security.
-#
-# IMPORTANT:
-# Other modules may rely on this module being loaded to function.
-#<module name="m_ripemd160.so">
+#<module name="sha256">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Abbreviation module: Provides the ability to abbreviate commands a-la
# BBC BASIC keywords.
-#<module name="m_abbreviation.so">
+#<module name="abbreviation">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alias module: Allows you to define server-side command aliases.
-#<module name="m_alias.so">
+#<module name="alias">
#
# Set the 'prefix' for in-channel aliases (fantasy commands) to the
# specified character. If not set, the default is "!".
#
#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# If you have the m_alias.so module loaded, you may also define #
-# aliases as shown below. They are commonly used to provide shortcut #
-# commands to services, however they are not limited to just this use.#
+# If you have the alias module loaded, you may also define aliases as #
+# shown below. They are commonly used to provide shortcut commands to #
+# services, however they are not limited to just this use. #
# An alias tag requires the following values to be defined in it: #
# #
# text - The text to detect as the actual command line. #
# matched, or it has no format value. Aliases are #
# read from the top of the file to the bottom. #
# #
-# usercommand - If this is true, the alias can be run simply as #
-# /aliasname. Defaults to true. #
+# usercommand - If set to yes, the alias can be run simply as #
+# /ALIASNAME. Defaults to yes. #
# #
-# channelcommand - If this is true, the alias can be used as an #
+# channelcommand - If set to yes, the alias can be used as an #
# in-channel alias or 'fantasy command', prefixed #
# by the fantasy prefix character, !aliasname by #
-# default. Defaults to false. #
+# default. Defaults to no. #
# #
# format - If this is defined, the parameters of the alias #
# must match this glob pattern. For example if you #
# to successfully trigger. If they are not, then #
# the user receives a 'no such nick' 401 numeric. #
# #
-# uline - Setting this to true will ensure that the user #
-# given in 'requires' is also on a u-lined server, #
+# stripcolor - If set to yes, the text from the user will be #
+# stripped of color and format codes before #
+# matching against 'text'. #
+# #
+# uline - Setting this to yes will ensure that the user #
+# given in 'requires' is also on a U-lined server, #
# as well as actually being on the network. If the #
-# user is online, but not on a u-lined server, #
+# user is online, but not on a U-lined server, #
# then an oper alert is sent out as this is #
# possibly a sign of a user trying to impersonate #
# a service. #
# #
-# operonly - If true, this will make the alias oper only. #
+# operonly - If yes, this will make the alias oper only. #
# If a non-oper attempts to use the alias, it will #
# appear to not exist. #
# #
-#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-#<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-#<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
-#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-#<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-#<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#
# An example of using the format value to create an alias with two
# different behaviours depending on the format of the parameters.
#
-#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
+#<alias text="ID" format="#*" replace="SQUERY ChanServ :IDENTIFY $2 $3"
# requires="ChanServ" uline="yes">
#
-#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
+#<alias text="ID" replace="SQUERY NickServ :IDENTIFY $2"
# requires="NickServ" uline="yes">
#
# This alias fixes a glitch in xchat 2.6.x and above and the way it
# assumes IDENTIFY must be prefixed by a colon (:) character. It should
-# be placed ABOVE the default NICKSERV alias (the first example) listed
-# above.
+# be placed ABOVE the default NICKSERV alias.
#
-#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
+#<alias text="NICKSERV" format=":IDENTIFY *" replace="SQUERY NickServ :IDENTIFY $3-"
# requires="NickServ" uline="yes">
#
# You may also add aliases to trigger based on something said in a
# command must be preceded by the fantasy prefix when used.
#
#<alias text="CS" usercommand="no" channelcommand="yes"
-# replace="PRIVMSG ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
+# replace="SQUERY ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
#
# This would be used as "!cs <command> <options>", with the channel
# being automatically inserted after the command in the message to
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Allowinvite module: Gives channel mode +A to allow all users to use
# /INVITE, and extban A to deny invite from specific masks.
-#<module name="m_allowinvite.so">
+#<module name="allowinvite">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alltime module: Shows time on all connected servers at once.
# This module is oper-only and provides /ALLTIME.
# To use, ALLTIME must be in one of your oper class blocks.
-#<module name="m_alltime.so">
+#<module name="alltime">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Anticaps module: Adds channel mode +B which allows you to punish
+# users that send overly capitalised messages to channels. Unlike the
+# blockcaps module this module is more flexible as it has more options
+# for punishment and allows channels to configure their own punishment
+# policies.
+#<module name="anticaps">
+#
+# You may also configure the characters which anticaps considers to be
+# lower case and upper case. Any characters not listed here are assumed
+# to be punctuation and will be ignored when counting:
+# <anticaps lowercase="abcdefghijklmnopqrstuvwxyz"
+# uppercase="ABCDEFGHIJKLMNOPQRSTUVWXYZ">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Argon2 module: Allows other modules to generate Argon2 hashes,
+# usually for cryptographic uses and security.
+# This module makes the algorithms argon2i, argon2d and argon2id
+# available for use.
+# Note that this module is extra, and must be enabled explicitly
+# to build. It depends on libargon2.
+#<module name="argon2">
+#
+# memory: Memory hardness, in KiB. E.g. 131072 KiB = 128 MiB.
+# iterations: Time hardness in iterations. (def. 3)
+# lanes: How many parallel chains can be run. (def. 1)
+# threads: Maximum amount of threads each invocation can spawn. (def. 1)
+# length: Output length in bytes. (def. 32)
+# saltlength: Salt length in bytes. (def. 16)
+# version: Algorithm version, 10 or 13. (def. 13)
+# The parameters can be customized as follows:
+#<argon2 iterations="3" memory="131074" length="32" saltlength="16">
+# Defines the parameters that are common for all the variants (i/d/id).
+# Can be overridden on individual basis, e.g.
+#<argon2i iterations="4">
+#<argon2d memory="131074"
+#<argon2id iterations="5" memory="262144" length="64" saltlength="32">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auditorium module: Adds channel mode +u which makes everyone else
# except you in the channel invisible, used for large meetings etc.
-#<module name="m_auditorium.so">
+#<module name="auditorium">
#
# Auditorium settings:
#
# For example +w o:*!Attila@127.0.0.1 will op anyone matching that mask
# on join. This can be combined with extbans, for example +w o:R:Brain
# will op anyone identified to the account "Brain".
-# Another useful combination is with SSL client certificate
+# Another useful combination is with TLS (SSL) client certificate
# fingerprints: +w h:z:72db600734bb9546c1bdd02377bc21d2a9690d48 will
# give halfop to the user(s) having the given certificate.
-#<module name="m_autoop.so">
+#<module name="autoop">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban except module: Adds support for channel ban exceptions (+e).
-#<module name="m_banexception.so">
+#<module name="banexception">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban redirection module: Allows bans which redirect to a specified
# channel. e.g. +b nick!ident@host#channelbanneduserissentto
-#<module name="m_banredirect.so">
+#<module name="banredirect">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# bcrypt module: Allows other modules to generate bcrypt hashes,
+# usually for cryptographic uses and security.
+#<module name="bcrypt">
+#
+# rounds: Defines how many rounds the bcrypt function will run when
+# generating new hashes.
+#<bcrypt rounds="10">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block amsg module: Attempt to block all usage of /amsg and /ame.
-#<module name="m_blockamsg.so">
+#<module name="blockamsg">
#
#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you have the m_blockamsg.so module loaded, you can configure it #
-# with the <blockamsg> tag: #
+# If you have the blockamsg module loaded, you can configure it with #
+# the <blockamsg> tag: #
# #
-# delay - How many seconds between two messages to force #
-# them to be recognised as unrelated. #
+# delay - How much time between two messages to force them #
+# to be recognised as unrelated. #
# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
# or 'killopers'. Define how to take action when #
# a user uses /amsg or /ame. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block CAPS module: Adds channel mode +B, blocks all-CAPS messages.
-#<module name="m_blockcaps.so">
+#
+# NOTE: This module is deprecated and will be removed in a future version
+# of InspIRCd. You should use the anticaps module shown above instead.
+#<module name="blockcaps">
#
#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# percent - How many percent of text must be caps before text #
+# percent - The percentage of a message which must be upper #
+# case before it will be blocked. #
+# #
+# minlen - The minimum length a message must be before it #
# will be blocked. #
# #
-# minlen - The minimum length a line must be for the block #
-# percent to have any effect. #
+# lowercase - The characters which will be considered lower #
+# case. #
# #
-# capsmap - A list of chars to be considered CAPS. Can be used #
-# to add CAPS characters for your language. Also you #
-# can add things like ! and space to further lock #
-# down on caps usage. #
+# uppercase - The characters which will be considered upper #
+# case. #
+#
#<blockcaps percent="50"
# minlen="5"
-# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
+# lowercase="abcdefghijklmnopqrstuvwxyz"
+# uppercase="ABCDEFGHIJKLMNOPQRSTUVWXYZ">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block color module: Blocking color-coded messages with chan mode +c.
-#<module name="m_blockcolor.so">
+#<module name="blockcolor">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Botmode module: Adds the user mode +B. If set on a user, it will
# show that the user is a bot in /WHOIS.
-#<module name="m_botmode.so">
+#<module name="botmode">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CallerID module: Adds usermode +g which activates hybrid-style
+# CallerID module: Adds user mode +g which activates hybrid-style
# callerid: block all private messages unless you /ACCEPT first.
-#<module name="m_callerid.so">
+#<module name="callerid">
#
#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# maxaccepts - Maximum number of entries a user can add to his #
-# /ACCEPT list. Default is 16 entries. #
-# operoverride - Can opers (note: ALL opers) override callerid? #
-# Default is no. #
-# tracknick - Preserve /accept entries when a user changes nick? #
+# maxaccepts - Maximum number of entries a user can add to their #
+# /ACCEPT list. Default is 30 entries. #
+# tracknick - Preserve /ACCEPT entries when a user changes nick? #
# If no (the default), the user is removed from #
-# everyone's accept list if he changes nickname. #
-# cooldown - Amount of time (in seconds) that must pass since #
-# the last notification sent to a user before he can #
-# be sent another. Default is 60 (1 minute). #
-#<callerid maxaccepts="16"
-# operoverride="no"
+# everyone's accept list if their nickname changes. #
+# cooldown - Amount of time that must pass since the last #
+# notification sent to a user before they can be #
+# sent another. Default is 1 minute. #
+#<callerid maxaccepts="30"
# tracknick="no"
-# cooldown="60">
+# cooldown="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CAP module: Provides the CAP negotiation mechanism required by the
-# m_sasl, m_namesx, m_uhnames, and m_ircv3 modules.
-# It is also recommended for the STARTTLS support in m_ssl_gnutls.
-#<module name="m_cap.so">
+# sasl, namesx, uhnames, and ircv3 modules.
+# It is also recommended for STARTTLS support in the starttls module.
+#<module name="cap">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CBAN module: Lets you disallow channels from being used at runtime.
# This module is oper-only and provides /CBAN.
# To use, CBAN must be in one of your oper class blocks.
-#<module name="m_cban.so">
+#<module name="cban">
+# CBAN does not allow glob channelmasks by default for compatibility
+# reasons. You can enable glob support by uncommenting the next line.
+#<cban glob="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Censor module: Adds channel and user mode +G.
-#<module name="m_censor.so">
+# Censor module: Adds channel and user mode +G which block phrases that
+# are listed in the server bad words list.
+#<module name="censor">
#
#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_censor module, then you must #
-# specify some censor tags. See also: #
-# https://wiki.inspircd.org/Modules/2.0/censor #
-#
-#<include file="conf/examples/censor.conf.example">
+# If you have the censor module loaded you should specify one or more #
+# phrases to replace/block in user messages. The config for this is #
+# formatted as follows: #
+# #
+# Replaces "eggplant" with "aubergine" within messages: #
+# <badword text="eggplant" replace="aubergine"> #
+# #
+# Blocks messages that contain "fluffy capybaras": #
+#<badword text="fluffy capybaras"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-#<module name="m_cgiirc.so">
+# CGI:IRC module: Enables forwarding the real IP address of a user from
+# a gateway to the IRC server.
+#<module name="cgiirc">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
-# Optional - If you specify to use m_cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: https://wiki.inspircd.org/Modules/2.0/cgiirc
-#
-# Set to yes if you want to notice opers when CGI:IRC clients connect.
+# If you use the cgiirc module then you must specify the gateways which
+# are authorised to forward IP/host information to your server. There
+# are currently two ways to do this:
+#
+# The webirc method is the recommended way to allow gateways to forward
+# IP/host information. When using this method the gateway sends a WEBIRC
+# message to the server on connection. For more details please read the
+# IRCv3 WebIRC specification at: https://ircv3.net/specs/extensions/webirc.html
+#
+# When using this method you must specify one or more wildcard masks
+# or CIDR ranges to allow gateway connections from and at least one of
+# either a TLS (SSL) client certificate fingerprint for the gateway or
+# a password to be sent in the WEBIRC command.
+#
+# <cgihost type="webirc"
+# fingerprint="bd90547b59c1942b85f382bc059318f4c6ca54c5"
+# mask="192.0.2.0/24 198.51.100.*">
+# <cgihost type="webirc"
+# password="$2a$10$WEUpX9GweJiEF1WxBDSkeODBstIBMlVPweQTG9cKM8/Vd58BeM5cW"
+# hash="bcrypt"
+# mask="*.webirc.gateway.example.com">
+#
+# Alternatively if your gateway does not support sending the WEBIRC
+# message then you can configure InspIRCd to look for the client IP
+# address in the ident sent by the user. This is not recommended as it
+# only works with IPv4 connections.
+#
+# When using this method you must specify one or more wildcard masks
+# or CIDR ranges to allow gateway connections from. You can also
+# optionally configure the static value that replaces the IP in the
+# ident to avoid leaking the real IP address of gateway clients
+# (defaults to "gateway" if not set).
+#
+# <cgihost type="ident"
+# mask="198.51.100.0/24 203.0.113.*"
+# newident="wibble">
+# <cgihost type="ident"
+# mask="*.ident.gateway.example.com"
+# newident="wobble">
+#
+# By default gateway connections are logged to the +w snomask. If you
+# do not want this to happen then you can uncomment this to disable it.
# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="pass" mask="www.example.com"> # Get IP from PASS
-# <cgihost type="ident" mask="otherbox.example.com"> # Get IP from ident
-# <cgihost type="passfirst" mask="www.example.com"> # See the docs
-# New style:
-# <cgihost type="webirc" password="foobar"
-# mask="somebox.example.com"> # Get IP from WEBIRC
-#
+
# IMPORTANT NOTE:
# ---------------
#
-# When you connect CGI:IRC clients, there are two connect classes which
+# When you connect gateway clients, there are two connect classes which
# apply to these clients. When the client initially connects, the connect
-# class which matches the CGI:IRC site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
+# class which matches the gateway site's host is checked. Therefore you
+# must raise the maximum local/global clients for this IP as high as you
+# want to allow gateway clients. After the client has connected and is
+# determined to be a gateway client, the class which matches the client's
# real IP is then checked. You may set this class to a lower value, so that
# the real IP of the client can still be restricted to, for example, 3
# sessions maximum.
# Channel create module: Adds snomask +j, which will notify opers of
# any new channels that are created.
# This module is oper-only.
-#<module name="m_chancreate.so">
+#<module name="chancreate">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel filter module: Allows channel-op defined message filtering
# using simple string matches (channel mode +g).
-#<module name="m_chanfilter.so">
+#<module name="chanfilter">
#
# If hidemask is set to yes, the user will not be shown the mask when
-# his/her message is blocked.
-#<chanfilter hidemask="yes">
+# their message is blocked.
+#
+# If maxlen is set then it defines the maximum length of a filter entry.
+#
+# If notifyuser is set to no, the user will not be notified when
+# their message is blocked.
+#<chanfilter hidemask="yes" maxlen="50" notifyuser="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel history module: Displays the last 'X' lines of chat to a user
# joining a channel with +H 'X:T' set; 'T' is the maximum time to keep
# lines in the history buffer. Designed so that the new user knows what
# the current topic of conversation is when joining the channel.
-#<module name="m_chanhistory.so">
+#<module name="chanhistory">
#
-# Set the maximum number of lines allowed to be stored per channel below.
-# This is the hard limit for 'X'.
-# If notice is set to yes, joining users will get a NOTICE before playback
-# telling them about the following lines being the pre-join history.
-# If bots is set to yes, it will also send to users marked with +B
-#<chanhistory maxlines="20" notice="yes" bots="yes">
+#-#-#-#-#-#-#-#-#-#-#- CHANHISTORY CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# bots - Whether to send channel history to bots. Defaults to yes. #
+# #
+# enableumode - Whether to enable the +N user mode which allows users #
+# to opt-out of receiving channel history. Defaults to #
+# no. #
+# #
+# maxlines - The maximum number of lines of chat history to send to a #
+# joining users. Defaults to 50. #
+# #
+# prefixmsg - Whether to send an explanatory message to clients that #
+# don't support the chathistory batch type. Defaults to #
+# yes. #
+# #
+#<chanhistory bots="yes"
+# enableumode="yes"
+# maxlines="50"
+# prefixmsg="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel logging module: Used to send snotice output to channels, to
# The "channel" field is where you want the messages to go, "snomasks"
# is what snomasks you want to be sent to that channel. Multiple tags
# are allowed.
-#<module name="m_chanlog.so">
+#<module name="chanlog">
#<chanlog snomasks="AOcC" channel="#opers">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# characters in the channel name such as bold, colorcodes, etc. which
# can be quite annoying and allow users to on occasion have a channel
# that looks like the name of another channel on the network.
-#<module name="m_channames.so">
+#<module name="channames">
#<channames
# denyrange: characters or range of characters to deny in channel
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channelban: Implements extended ban j:, which stops anyone already
-# in a channel matching a ban like +b j:#channel*mask from joining.
+# in a channel matching a ban like +b j:#channel from joining.
+# It is also possible to ban based on their status in that channel,
+# like so: +b j:@#channel, this example prevents the ops from joining.
# Note that by default wildcard characters * and ? are allowed in
-# channel names. To disallow them, load m_channames and add characters
-# 42 and 63 to denyrange (see above).
-#<module name="m_channelban.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Chanprotect module: Gives +q and +a channel modes.
-#
-# IMPORTANT: This module has been removed in the next major version of
-# InspIRCd. You should use m_customprefix instead.
-#<module name="m_chanprotect.so">
-
-#<chanprotect
- # noservices: With this set to yes, when a user joins an empty channel,
- # the server will set +q on them. If set to no, it will only set +o
- # on them until they register the channel.
- #noservices="no"
-
- # qprefix: Prefix (symbol) to use for +q users.
- #qprefix="~"
-
- # aprefix: Prefix (symbol) to use for +a users.
- #aprefix="&"
-
- # deprotectself: If this value is set (true, yes or 1), it will allow
- # +a and +q users to remove the +a and +q from themselves, otherwise,
- # the status will have to be removed by services.
- #deprotectself="yes"
-
- # deprotectothers: If this value is set to yes, true, or 1, then any
- # user with +q or +a may remove the +q or +a from other users.
- #deprotectothers="yes">
-
+# channel names. To disallow them, load the channames module and
+# add characters 42 and 63 to denyrange (see above).
+#<module name="channelban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Check module: Adds the /CHECK command.
# IP addresses and hosts.
# This module is oper-only.
# To use, CHECK must be in one of your oper class blocks.
-#<module name="m_check.so">
+#<module name="check">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGHOST module: Adds the /CHGHOST command.
# NOTE: Services will not be able to set vhosts on users if this module
# isn't loaded. If you're planning on running services, you probably
# want to load this.
-#<module name="m_chghost.so">
+#<module name="chghost">
#
#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
# Optional - If you want to use special chars for hostnames you can #
# CHGIDENT module: Adds the /CHGIDENT command.
# This module is oper-only.
# To use, CHGIDENT must be in one of your oper class blocks.
-#<module name="m_chgident.so">
+#<module name="chgident">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGNAME module: Adds the /CHGNAME command.
# This module is oper-only.
# To use, CHGNAME must be in one of your oper class blocks.
-#<module name="m_chgname.so">
+#<module name="chgname">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connection class ban module: Adds support for extban 'n' which
+# matches against the class name of the user's connection.
+# This module assumes that connection classes are named in a uniform
+# way on all servers of the network. Wildcards are accepted.
+#<module name="classban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Cloaking module: Adds usermode +x and cloaking support.
-# Relies on the module m_md5.so being loaded.
-# To cloak users when they connect, load m_conn_umodes and set
+# Clear chan module: Allows opers to masskick, masskill or
+# mass G/Z-line all users on a channel using /CLEARCHAN.
+#<module name="clearchan">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Cloaking module: Adds user mode +x and cloaking support.
+# Relies on the md5 module being loaded.
+# To cloak users when they connect, load the conn_umodes module and set
# <connect:modes> to include the +x mode. The example <connect> tag
-# shows this. See the m_conn_umodes module for more information.
-#<module name="m_cloaking.so">
+# shows this. See the conn_umodes module for more information.
+#<module name="cloaking">
#
#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# To use m_cloaking, you must define a cloak key, and optionally a #
+# To use cloaking, you must define a cloak key, and optionally a #
# cloak prefix as shown below. The cloak key must be shared across #
-# the network for correct cloaking. #
+# the network for consistent cloaking and must be at least thirty #
+# characters long. #
# #
-# There are four methods of cloaking: #
+# There are two methods of cloaking: #
# #
-# half Cloak only the "unique" portion of a host; show #
-# the last 2 parts of the domain, /16 subnet of IPv4 #
-# or /48 subnet of the IPv6 address. #
+# half Cloak only the "unique" portion of a host; by #
+# default show the last 2 parts of the domain, #
+# /16 subnet of IPv4 or /48 subnet of the IPv6 #
+# address. #
+# To change the number of shown parts, modify the #
+# domainparts option. #
# #
# full Cloak the users completely, using three slices for #
# common CIDR bans (IPv4: /16, /24; IPv6: /48, /64). #
# #
-# These methods use a single key that can be any length of text. #
+# The methods use a single key that can be any length of text. #
# An optional prefix may be specified to mark cloaked hosts. #
# #
-# The following methods are maintained for backwards compatibility; #
-# they are slightly less secure, and always hide unresolved IPs. #
-# #
-# compat-host InspIRCd 1.2-compatible host-based cloaking. #
-# compat-ip InspIRCd 1.2-compatible ip-always cloaking. #
-# #
-# If you use a compat cloaking mode then you must specify key1, key2, #
-# key3, key4; the values must be less than 0x80000000 and should be #
-# picked at random. Prefix is mandatory, will default to network name #
-# if not specified, and will always have a "-" appended. #
-# #
-# IMPORTANT: The compat-host and compat-ip modes have been removed in #
-# the next major version of InspIRCd. You should ONLY use them if you #
-# need backwards compatibility with InspIRCd 1.2. #
+# IMPORTANT: Changing these details will break all of your existing #
+# bans. If you do not want this to happen you can define multiple #
+# cloak tags. The first will be used for cloaking and the rest will #
+# be used for checking if a user is banned in a channel. #
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
#<cloak mode="half"
-# key="secret"
-# prefix="net-">
-
-#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Close module: Allows an oper to close all unregistered connections.
-# This module is oper-only and provides the /CLOSE command.
-# To use, CLOSE must be in one of your oper class blocks.
-#<module name="m_close.so">
+# key="changeme"
+# domainparts="3"
+# prefix="net-"
+# ignorecase="no">
+#
+#<cloak mode="full"
+# key="changeme"
+# prefix="net-"
+# ignorecase="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clones module: Adds an oper command /CLONES for detecting cloned
# issued, use with care.
# This module is oper-only.
# To use, CLONES must be in one of your oper class blocks.
-#<module name="m_clones.so">
+#<module name="clones">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Codepage module: Allows using a custom 8-bit codepage for nicknames
+# and case mapping.
+#<module name="codepage">
+#
+# You should include one of the following files to set your codepage:
+#<include file="examples/codepages/ascii.conf.example">
+#<include file="examples/codepages/latin1.conf.example">
+#<include file="examples/codepages/rfc1459.conf.example">
+#<include file="examples/codepages/strict-rfc1459.conf.example">
+#
+# You can also define a custom codepage. For details on how to do this
+# please refer to the docs site:
+# https://docs.inspircd.org/3/modules/codepage
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Common channels module: Adds user mode +c, which, when set, requires
# that users must share a common channel with you to PRIVMSG or NOTICE
# you.
-#<module name="m_commonchans.so">
+#<module name="commonchans">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auto join on connect module: Allows you to force users to join one
-# or more channels automatically upon connecting to the server.
-#<module name="m_conn_join.so">
+# or more channels automatically upon connecting to the server, or
+# join them in case they aren't on any channels after being online
+# for X seconds.
+#<module name="conn_join">
#
#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
-# If you have m_conn_join.so loaded, you can configure it using the
-# following values, or set autojoin="#chat,#help" in <connect> blocks.
+# If you have the conn_join module loaded, you can configure it below
+# or set autojoin="#chat,#help" in <connect> blocks.
#
+# Join users immediately after connection to #one #two and #three.
#<autojoin channel="#one,#two,#three">
+# Join users to #chat after 15 seconds if they aren't on any channels.
+#<autojoin channel="#chat" delay="15">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set modes on connect module: When this module is loaded <connect>
# blocks may have an optional modes="" value, which contains modes to
# add or remove from users when they connect to the server.
-#<module name="m_conn_umodes.so">
+#<module name="conn_umodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Wait for PONG on connect module: Send a PING to all connecting users
# and don't let them connect until they reply with a PONG.
# This is useful to stop certain kinds of bots and proxies.
-#<module name="m_conn_waitpong.so">
+#<module name="conn_waitpong">
#
#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you have the m_conn_waitpong.so module loaded, configure it with #
-# the <waitpong> tag: #
+# If you have the conn_waitpong module loaded, configure it with the #
+# <waitpong> tag: #
# #
# sendsnotice - Whether to send a helpful notice to users on #
# connect telling them how to connect, should #
# killonbadreply - Whether to kill the user if they send the wrong #
# PONG reply. #
# #
-#<waitpong sendsnotice="yes" killonbadreply="yes">
+#<waitpong sendsnotice="no" killonbadreply="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel cycle module: Adds the /CYCLE command which is a server-side
# /HOP that bypasses restrictive modes.
-#<module name="m_cycle.so">
+#<module name="cycle">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connectban: Provides IP connection throttling. Any IP range that
-# connects too many times (configurable) in an hour is Z-Lined for a
+# connects too many times (configurable) in an hour is Z-lined for a
# (configurable) duration, and their count resets to 0.
-#<module name="m_connectban.so">
+#<module name="connectban">
#
# ipv4cidr and ipv6cidr allow you to turn the comparison from
# individual IP addresses (32 and 128 bits) into CIDR masks, to allow
#
# This allows for 10 connections in an hour with a 10 minute ban if
# that is exceeded.
-#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
+#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128"
+# A custom ban message may optionally be specified.
+# banmessage="Your IP range has been attempting to connect too many times in too short a duration. Wait a while, and you will be able to connect.">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connection throttle module.
-#<module name="m_connflood.so">
+#<module name="connflood">
#
#-#-#-#-#-#-#-#-#-#-#- CONNTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-# seconds, maxconns - Amount of connections per <seconds>.
+# period, maxconns - Amount of connections per <period>.
#
# timeout - Time to wait after the throttle was activated
# before deactivating it. Be aware that the time
# bootwait - Amount of time in seconds to wait before enforcing
# the throttling when the server just booted.
#
-#<connflood seconds="30" maxconns="3" timeout="30"
-# quitmsg="Throttled" bootwait="10">
+#<connflood period="30" maxconns="3" timeout="30"
+# quitmsg="Throttled" bootwait="2m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Custom prefixes: Allows for channel prefixes to be added.
-# This replaces m_chanprotect and m_halfop.
-#<module name="m_customprefix.so">
+# Custom prefixes: Allows for channel prefixes to be configured.
+#<module name="customprefix">
#
# name The name of the mode, must be unique from other modes.
# letter The letter used for this mode. Required.
# rank A numeric rank for this prefix, defining what permissions it gives.
# The rank of voice, halfop and op is 10000, 20000, and 30000,
# respectively.
-# ranktoset The numeric rank required to set/unset this mode. Defaults to rank.
+# ranktoset The numeric rank required to set this mode. Defaults to rank.
+# ranktounset The numeric rank required to unset this mode. Defaults to ranktoset.
# depriv Can you remove the mode from yourself? Defaults to yes.
#<customprefix name="founder" letter="q" prefix="~" rank="50000" ranktoset="50000">
#<customprefix name="admin" letter="a" prefix="&" rank="40000" ranktoset="50000">
#<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
-#<customprefix name="halfvoice" letter="V" prefix="-" rank="1" ranktoset="20000">
#
-# Do /RELOADMODULE m_customprefix.so after changing the settings of this module.
+# You can also override the configuration of prefix modes added by both the core
+# and other modules by adding a customprefix tag with change="yes" specified.
+# <customprefix name="op" change="yes" rank="30000" ranktoset="30000">
+# <customprefix name="voice" change="yes" rank="10000" ranktoset="20000" depriv="no">
+#
+# Do /RELOADMODULE customprefix after changing the settings of this module.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Custom title module: Adds the /TITLE command which allows for trusted
# users to gain a custom whois line and an optional vhost can be
# specified.
-#<module name="m_customtitle.so">
+#<module name="customtitle">
#
#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# name - The username used to identify.
# password - The password used to identify.
# hash - The hash for the specific user's password (optional).
-# m_password_hash.so and a hashing module must be loaded
+# password_hash and a hashing module must be loaded
# for this to work.
# host - Allowed hostmask (optional).
# title - Title shown in whois.
#
#<title name="foo" password="bar" title="Official Chat Helper">
#<title name="bar" password="foo" host="ident@test.org" title="Official Chat Helper" vhost="helper.test.org">
-#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper">
+#<title name="foo" password="$2a$10$UYZ4OcO8NNTCCGyCdY9SK.2GHiqGgxZfHFPOPmWuxEVWVQTtoDC7C" hash="bcrypt" title="Official Chat Helper">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command.
-#<module name="m_dccallow.so">
+#<module name="dccallow">
#
#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# blockchat - Whether to block DCC CHAT as well as DCC SEND.
#<banfile pattern="*.txt" action="allow">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Deaf module: Adds support for the usermode +d - deaf to channel
-# messages and channel notices.
-#<module name="m_deaf.so">
+# Deaf module: Adds support for user modes +d and +D:
+# d - deaf to channel messages and notices.
+# D - deaf to user messages and notices.
+# The +D user mode is not enabled by default to enable link compatibility
+# with 2.0 servers.
+#<module name="deaf">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- DEAF CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# bypasschars - Characters that bypass deaf to a regular user.
+# bypasscharsuline - Characters that bypass deaf to a U-lined user (services).
+# Both of these take a list of characters that must match
+# the starting character of a message.
+# If 'bypasscharsuline' is empty, then 'bypasschars' will
+# match for both regular and U-lined users.
+# enableprivdeaf - Whether to enable user mode +D (privdeaf).
+# privdeafuline - Whether U-lined users bypass user mode +D (privdeaf).
+#
+#<deaf bypasschars="" bypasscharsuline="!" enableprivdeaf="no" privdeafuline="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Delay join module: Adds the channel mode +D which delays all JOIN
# speaking, their quit or part message will not be shown to the channel
# which helps cut down noise on large channels in a more friendly way
# than the auditorium mode. Only channel ops may set the +D mode.
-#<module name="m_delayjoin.so">
+#<module name="delayjoin">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Delay message module: Adds the channel mode +d which disallows a user
# from talking in the channel unless they've been joined for X seconds.
# Settable using /MODE #chan +d 30
-#<module name="m_delaymsg.so">
+#<module name="delaymsg">
# Set allownotice to no to disallow NOTICEs too. Defaults to yes.
#<delaymsg allownotice="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny channels module: Deny channels from being used by users.
-#<module name="m_denychans.so">
+#<module name="denychans">
#
#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# If you have the m_denychans.so module loaded, you need to specify #
-# the channels to deny: #
+# If you have the denychans module loaded, you need to specify the #
+# channels to deny: #
# #
# name - The channel name to deny (glob masks are ok). #
# allowopers - If operators are allowed to override the deny. #
# Glob masks are accepted here also. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Devoice module: Let users devoice themselves using /DEVOICE #chan.
-#<module name="m_devoice.so">
+# Disable module: Provides support for disabling commands and modes. #
+#<module name="disable">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- DISABLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the disable module loaded then you need to specify the #
+# commands and modes that you want disabled. Users who have not fully #
+# connected yet are exempt from this module so you can e.g. disable #
+# the NICK command but still allow users to connect to the server. #
+# #
+# commands - A space-delimited list of commands that can not be used #
+# by users. You can exempt server operators from this with #
+# the servers/use-disabled-commands privilege. #
+# #
+# chanmodes - One or more channel modes that can not be added/removed #
+# by users. You can exempt server operators from this #
+# with the servers/use-disabled-modes privilege. #
+# #
+# usermodes - One or more user modes that can not be added/removed by #
+# users. You can exempt server operators from this with #
+# the servers/use-disabled-modes privilege. #
+# #
+# fakenonexistent - Whether to pretend that a disabled command/mode #
+# does not exist when executed/changed by a user. #
+# Defaults to no. #
+# #
+# notifyopers - Whether to send a notice to snomask `a` when a user #
+# is prevented from using a disabled command/mode. #
+# Defaults to no. #
+# #
+#<disabled commands="KICK TOPIC" #
+# chanmodes="kp" #
+# usermodes="iw" #
+# fakenonexistent="yes" #
+# notifyopers="no"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DNS blacklist module: Provides support for looking up IPs on one or #
# more blacklists. #
-#<module name="m_dnsbl.so"> #
+#<module name="dnsbl">
+# #
+# For configuration options please see the docs page for dnsbl at #
+# https://docs.inspircd.org/3/modules/dnsbl. You can also use one or #
+# more of the following example configs for popular DNSBLs: #
# #
-# For configuration options please see the wiki page for m_dnsbl at #
-# https://wiki.inspircd.org/Modules/2.0/dnsbl #
+# DroneBL (https://dronebl.org) #
+#<include file="examples/providers/dronebl.conf.example">
+# #
+# EFnet RBL (https://rbl.efnetrbl.org) #
+#<include file="examples/providers/efnet-rbl.conf.example">
+# #
+# dan.me.uk Tor exit node DNSBL (https://www.dan.me.uk/dnsbl) #
+#<include file="examples/providers/torexit.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Exempt channel operators module: Provides support for allowing #
# users of a specified channel status to be exempt from some channel #
-# restriction modes. Supported restrictions are #
-# blockcaps, blockcolor, censor, filter, flood, nickflood, noctcp, #
-# nonick, nonotice, regmoderated, stripcolor, and topiclock. #
+# restriction modes. Supported restrictions are: #
+# anticaps, auditorium-see, auditorium-vis, blockcaps, blockcolor, #
+# censor, filter, flood, nickflood, noctcp, nonick, nonotice, #
+# regmoderated, stripcolor, and topiclock. #
# See <options:exemptchanops> in inspircd.conf.example for a more #
# detailed list of the restriction modes that can be exempted. #
-# These are settable using /mode #chan +X <restriction>:<status> #
-#<module name="m_exemptchanops.so"> #
+# These are settable using: /MODE #chan +X <restriction>:<status> #
+# Furthermore, the exemptions configured in <options:exemptchanops> #
+# can also be negated by using: /MODE #chan +X <restriction>:* #
+#<module name="exemptchanops">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides message filtering, similar to SPAMFILTER. #
-#<module name="m_filter.so">
+#<module name="filter">
# #
-# This module depends upon a regex provider such as m_regex_pcre or #
-# m_regex_glob to function. You must specify which of these you want #
-# m_filter to use via the tag below. #
+# This module depends upon a regex provider such as regex_pcre or #
+# regex_glob to function. You must specify which of these you want #
+# the filter module to use via the tag below. #
# #
# Valid engines are: #
# #
-# glob - Glob patterns, provided via m_regex_glob. #
-# pcre - PCRE regexps, provided via m_regex_pcre, needs libpcre. #
-# tre - TRE regexps, provided via m_regex_tre, requires libtre. #
-# posix - POSIX regexps, provided via m_regex_posix, not available #
+# glob - Glob patterns, provided via regex_glob. #
+# pcre - PCRE regexps, provided via regex_pcre, needs libpcre. #
+# tre - TRE regexps, provided via regex_tre, requires libtre. #
+# posix - POSIX regexps, provided via regex_posix, not available #
# on Windows, no dependencies on other operating systems. #
-# stdlib - stdlib regexps, provided via m_regex_stdlib, see comment #
+# stdlib - stdlib regexps, provided via regex_stdlib, see comment #
# at the <module> tag for info on availability. #
# #
-#<filteropts engine="glob"> #
+# If notifyuser is set to no, the user will not be notified when #
+# their message is blocked. #
+# #
+# If warnonselfmsg is set to yes when a user sends a message to #
+# themself that matches a filter the filter will be ignored and a #
+# warning will be sent to opers instead. This stops spambots which #
+# send their spam message to themselves first to check if it is being #
+# filtered by the server. #
+#<filteropts engine="glob" notifyuser="yes" warnonselfmsg="no">
+# #
+# Your choice of regex engine must match on all servers network-wide. #
+# #
+# To learn more about the configuration of this module, read #
+# examples/filter.conf.example, which covers the various types of #
+# filters and shows how to add exemptions. #
# #
-# Your choice of regex engine must match on all servers network-wide.
-#
-# You may specify specific channels that are exempt from being filtered:
-#<exemptfromfilter channel="#blah">
-#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_filter module, then #
+# Optional - If you specify to use the filter module, then #
# specify below the path to the filter.conf file, or define some #
-# <filter> tags. #
+# <keyword> tags. #
# #
-#<include file="conf/examples/filter.conf.example">
+#<include file="examples/filter.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Gecos ban: Implements extended ban 'r', which stops anyone matching
-# a mask like +b r:*realname?here* from joining a channel.
-#<module name="m_gecosban.so">
+# Flash Policy Daemon module: Allows Flash IRC clients (e.g. LightIRC)#
+# to connect. If no file is specified, it'll serve a default policy #
+# allowing all IPs to connect to all plaintext IRC ports #
+#<bind address="" port="8430" type="flashpolicyd"> #
+#<flashpolicyd timeout="5" file=""> #
+#<module name="flashpolicyd"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GeoIP module: Allows the server admin to match users by country code.
-# This module is in extras. Re-run configure with:
-# ./configure --enable-extras=m_geoip.cpp
-# and run make install, then uncomment this module to enable it.
-# This module requires GeoIP to be installed on your system,
-# use your package manager to find the appropriate packages
-# or check the InspIRCd wiki page for this module.
-#<module name="m_geoip.so">
-#
-# The actual allow/ban actions are done by connect classes, not by the
-# GeoIP module. An example connect class to ban people from russia or
-# turkey:
-#
-# <connect deny="*" geoip="TR,RU">
-#
-# The country code must be in capitals and should be an ISO country
-# code such as TR, GB, or US. Unknown IPs (localhost, LAN IPs, etc)
-# will be assigned the country code "UNK". Since connect classes are
-# matched from top down, your deny classes must be above your allow
-# classes for them to match.
+# Real name ban: Implements two extended bans: #
+# 'a', which matches a n!u@h+realname mask like +b a:*!*@host+*real* #
+# 'r', which matches a realname mask like +b r:*realname?here* #
+#<module name="gecosban">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Geolocation ban module: Adds support for extban 'G' which matches #
+# against the ISO 3166-1 alpha-2 codes for the countries that users #
+# are connecting from. Users connecting from unknown origins such as #
+# internal networks can be matched against using the XX alpha-2 code. #
+# A full list of ISO 3166-1 alpha-2 codes can be found at #
+# https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 #
+#<module name="geoban">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Geolocation connect class module: Adds support for limiting connect #
+# classes to users from specific countries. With this module you can #
+# specify a space-delimited list of two character the ISO 3166-1 #
+# alpha-2 codes in the "country" field of a connect class. e.g. to #
+# deny connections from users in Russia or Turkey: #
+# #
+# <connect deny="*" country="TR RU"> #
+# #
+# Users connecting from unknown origins such as internal networks can #
+# be matched against using the XX alpha-2 code. A full list of ISO #
+# 3166-1 alpha-2 codes can be found at #
+# https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 #
+#<module name="geoclass">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MaxMindDB geolocation module: Provides geolocation information for #
+# other modules that need it using the libMaxMindDB library. #
+# #
+# This module is in extras. Re-run configure with: #
+# ./configure --enable-extras geo_maxmind
+# and run make install, then uncomment this module to enable it. #
+# #
+# This module requires libMaxMindDB to be installed on your system. #
+# Use your package manager to find the appropriate packages or check #
+# the InspIRCd documentation page for this module. #
+#<module name="geo_maxmind">
+# #
+# If you use the geo_maxmind module you MUST provide a database file #
+# to look up geolocation information in. You can either purchase this #
+# from MaxMind at https://www.maxmind.com/en/geoip2-country-database #
+# or use the free CC-BY-SA licensed GeoLite2 Country database which #
+# can be downloaded at https://dev.maxmind.com/geoip/geoip2/geolite2/ #
+#<maxmind file="GeoLite2-Country.mmdb">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Globops module: Provides the /GLOBOPS command and snomask +g.
# This module is oper-only.
# To use, GLOBOPS must be in one of your oper class blocks.
-#<module name="m_globops.so">
+#<module name="globops">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Global load module: Allows loading and unloading of modules network-
# and /GRELOADMODULE.
# To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE
# must be in one of your oper class blocks.
-#<module name="m_globalload.so">
+#<module name="globalload">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Halfop module: Provides the +h (halfops) channel status mode.
-#
-# IMPORTANT: This module has been removed in the next major version of
-# InspIRCd. You should use m_customprefix instead.
-#<module name="m_halfop.so">
+# HAProxy module: Adds support for the HAProxy PROXY v2 protocol. To
+# use this module specify hook="haproxy" in the <bind> tag that HAProxy
+# has been configured to connect to.
+#<module name="haproxy">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HELPOP module: Provides the /HELPOP command.
-#<module name="m_helpop.so">
+# HELPOP module: Provides the /HELPOP command
+#<module name="helpop">
#
#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you specify to use the m_helpop.so module, then specify below #
-# the path to the helpop.conf file. #
-#<include file="conf/examples/helpop-full.conf.example">
+# If you specify to use the helpop module, then specify below the #
+# path to the helpop.conf file. #
+# #
+#<include file="examples/helpop.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide chans module: Allows users to hide their channels list from non-
# opers by setting user mode +I on themselves.
-#<module name="m_hidechans.so">
+#<module name="hidechans">
#
# This mode can optionally prevent opers from seeing channels on a +I
-# user, for more privacy if set to true.
+# user, for more privacy if set to yes.
# This setting is not recommended for most mainstream networks.
-#<hidechans affectsopers="false">
+#<hidechans affectsopers="no">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Hide list module: Allows for hiding the list of listmodes from users
+# who do not have sufficient channel rank.
+#<module name="hidelist">
+#
+# Each <hidelist> tag configures one listmode to hide.
+# mode: Name of the listmode to hide.
+# rank: Minimum rank required to view the list. If set to 0, all
+# members of the channel may view the list, but non-members may not.
+# The rank of the built-in op and voice mode is 30000 and 10000,
+# respectively; the rank of other prefix modes is configurable.
+# Defaults to 20000.
+#
+# Hiding the ban list is not recommended because it may break some
+# clients.
+#
+# Hide filter (+g) list:
+#<hidelist mode="filter" rank="30000">
+# Only show invite exceptions (+I) to channel members:
+#<hidelist mode="invex" rank="0">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Hide mode module: Allows for hiding mode changes from users who do not
+# have sufficient channel privileges.
+#<module name="hidemode">
+#
+# Hide bans (+b) from people who are not voiced:
+#<hidemode mode="ban" rank="10000">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide oper module: Allows opers to hide their oper status from non-
# opers by setting user mode +H on themselves.
# This module is oper-only.
-#<module name="m_hideoper.so">
+#<module name="hideoper">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hostchange module: Allows a different style of cloaking.
-#<module name="m_hostchange.so">
+#<module name="hostchange">
#
#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
-# See https://wiki.inspircd.org/Modules/2.0/hostchange for help. #
+# See https://docs.inspircd.org/3/modules/hostchange for help. #
# #
-#<host suffix="invalid.org" separator="." prefix="">
-#<hostchange mask="*@42.theanswer.example.org" action="addnick">
-#<hostchange mask="*root@*" action="suffix">
+#<hostchange mask="*@42.theanswer.example.org" action="addaccount" suffix=".users.example.com">
+#<hostchange mask="*root@*" action="addnick" prefix="example/users/">
#<hostchange mask="a@example.com" action="set" value="foo.bar.baz">
-#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
+#<hostchange mask="*@localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
+
+# hostcycle: If loaded, when a user gets a host or ident set, it will
+# cycle them in all their channels. If not loaded it will simply change
+# their host/ident without cycling them.
+# This module is compatible with the ircv3_chghost module. Clients
+# supporting the chghost extension will get the chghost message instead
+# of seeing a host cycle.
+#<module name="hostcycle">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# httpd module: Provides HTTP server support for InspIRCd.
-#<module name="m_httpd.so">
+#<module name="httpd">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
-# If you choose to use the m_httpd.so module, then you will need to add
+# If you choose to use the httpd module, then you will need to add
# a <bind> tag with type "httpd", and load at least one of the other
-# m_httpd_* modules to provide pages to display.
+# httpd_* modules to provide pages to display.
# <bind address="127.0.0.1" port="8067" type="httpd">
-# <bind address="127.0.0.1" port="8097" type="httpd" ssl="gnutls">
+# <bind address="127.0.0.1" port="8097" type="httpd" sslprofile="Clients">
#
# You can adjust the timeout for HTTP connections below. All HTTP
-# connections will be closed after (roughly) this many seconds.
+# connections will be closed after (roughly) this time period.
#<httpd timeout="20">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HTTP ACL module: Provides access control lists for m_httpd dependent
+# HTTP ACL module: Provides access control lists for httpd dependent
# modules. Use this module to restrict pages by IP address and by
# password.
-#<module name="m_httpd_acl.so">
+#<module name="httpd_acl">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
-# Restrict access to the m_httpd_stats module to all but the local
+# Restrict access to the httpd_stats module to all but the local
# network and when the correct password is specified:
# <httpdacl path="/stats*" types="password,whitelist"
# username="secrets" password="mypasshere" whitelist="127.0.0.*,10.*">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HTTP config module: Allows the server configuration to be viewed over
-# HTTP via the /config path. Requires m_httpd.so to be loaded for it to
-# function.
+# HTTP via the /config path. Requires the httpd module to be loaded for
+# it to function.
#
# IMPORTANT: This module exposes extremely sensitive information about
# your server and users so you *MUST* protect it using a local-only
-# <bind> tag and/or the m_httpd_acl.so module. See above for details.
-#<module name="m_httpd_config.so">
+# <bind> tag and/or the httpd_acl module. See above for details.
+#<module name="httpd_config">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HTTP stats module: Provides server statistics over HTTP via the /stats
-# path. Requires m_httpd.so to be loaded for it to function.
+# path. Requires the httpd module to be loaded for it to function.
#
# IMPORTANT: This module exposes extremely sensitive information about
# your server and users so you *MUST* protect it using a local-only
-# <bind> tag and/or the m_httpd_acl.so module. See above for details.
-#<module name="m_httpd_stats.so">
+# <bind> tag and/or the httpd_acl module. See above for details.
+#<module name="httpd_stats">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ident: Provides RFC 1413 ident lookup support.
# When this module is loaded <connect:allow> tags may have an optional
# useident="yes|no" boolean value, determining whether or not to lookup
# ident on users matching that connect tag.
-#<module name="m_ident.so">
+#<module name="ident">
#
#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you are using the m_ident.so module, then you can #
-# specify the timeout for ident lookups here. If not defined, it will #
-# default to 5 seconds. This is a non-blocking timeout which holds #
-# the user in a 'connecting' state until the lookup is complete. #
-# The bind value indicates which IP to bind outbound requests to. #
+# Optional - If you are using the ident module, then you can specify #
+# the timeout for ident lookups here. If not defined, it will default #
+# to 5 seconds. This is a non-blocking timeout which holds the user #
+# in a 'connecting' state until the lookup is complete. #
+# prefixunqueried: If yes, the idents of users in a connect class #
+# with ident lookups disabled (i.e. <connect useident="no">) will be #
+# prefixed with a "~". If no, the ident of those users will not be #
+# prefixed. Default is no. #
#
-#<ident timeout="5">
+#<ident timeout="5" prefixunqueried="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite exception module: Adds support for channel invite exceptions
# (+I).
-#<module name="m_inviteexception.so">
+#<module name="inviteexception">
# bypasskey: If this is enabled, exceptions will bypass +k as well as +i
#<inviteexception bypasskey="yes">
# extended-join, away-notify and account-notify. These are optional
# enhancements to the client-to-server protocol. An extension is only
# active for a client when the client specifically requests it, so this
-# module needs m_cap to work.
+# module needs the cap module to work.
#
# Further information on these extensions can be found at the IRCv3
# working group website:
-# http://ircv3.net/irc/
+# https://ircv3.net/irc/
#
-#<module name="m_ircv3.so">
+#<module name="ircv3">
# The following block can be used to control which extensions are
-# enabled. Note that extended-join can be incompatible with m_delayjoin
+# enabled. Note that extended-join can be incompatible with delayjoin
# and host cycling.
-#<ircv3 accountnotify="on" awaynotify="on" extendedjoin="on">
+#<ircv3 accountnotify="yes" awaynotify="yes" extendedjoin="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Join flood module: Adds support for join flood protection +j X:Y.
-# Closes the channel for 60 seconds if X users join in Y seconds.
-#<module name="m_joinflood.so">
+# IRCv3 account-tag module. Adds the 'account' tag which contains the
+# services account name of the message sender.
+#<module name="ircv3_accounttag">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Jump server module: Adds support for the RPL_REDIR numeric.
-# This module is oper-only.
-# To use, JUMPSERVER must be in one of your oper class blocks.
-# If your server is redirecting new clients and you get disconnected,
-# do a REHASH from shell to open up again.
-#<module name="m_jumpserver.so">
+# IRCv3 batch module: Provides the batch IRCv3 extension which allows
+# the server to inform a client that a group of messages are related to
+# each other.
+#<module name="ircv3_batch">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 cap-notify module: Provides the cap-notify IRCv3 extension.
+# Required for IRCv3 conformance.
+#<module name="ircv3_capnotify">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 chghost module: Provides the chghost IRCv3 extension which
+# allows capable clients to learn when the host/ident of another user
+# changes without cycling the user. This module is compatible with the
+# hostcycle module. If both are loaded, clients supporting the chghost
+# extension will get the chghost message and won't see host cycling.
+#<module name="ircv3_chghost">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 client-to-client tags module: Provides the message-tags IRCv3
+# extension which allows clients to add extra data to their messages.
+# This is used to support new IRCv3 features such as replies and ids.
+#<module name="ircv3_ctctags">
+#
+# If you want to only allow client tags that are intended for processing
+# by the server you can disable the following setting. Doing this is not
+# recommended though as it may break clients.
+#<ctctags allowclientonlytags="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 echo-message module: Provides the echo-message IRCv3
+# extension which allows capable clients to get an acknowledgement when
+# their messages are delivered and learn what modifications, if any,
+# were applied to them.
+#<module name="ircv3_echomessage">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 invite-notify module: Provides the invite-notify IRCv3
+# extension which notifies supporting clients when a user invites
+# another user into a channel. This respects <options:announceinvites>.
+#<module name="ircv3_invitenotify">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 labeled-response module: Provides the labeled-response IRCv3
+# extension which allows server responses to be associated with the
+# client message which caused them to be sent.
+#<module name="ircv3_labeledresponse">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 message id module: Provides the msgid IRCv3 extension which
+# adds a unique identifier to each message when the message-tags cap
+# has been requested. This enables support for modern features such as
+# reactions and replies.
+#<module name="ircv3_msgid">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 server-time module. Adds the 'time' tag which adds a timestamp
+# to all messages received from the server.
+#<module name="ircv3_servertime">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 Strict Transport Security module: Provides the sts IRCv3
+# extension which allows clients connecting insecurely to upgrade their
+# connections to TLS.
+#<module name="ircv3_sts">
+#
+# If using the ircv3_sts module you MUST define a STS policy to send
+# to clients using the <sts> tag. This tag takes the following
+# attributes:
+#
+# host - A glob match for the SNI hostname to apply this policy to.
+# duration - The amount of time that the policy lasts for. Defaults to
+# five minutes by default. You should raise this to a month
+# or two once you know that your config is valid.
+# port - The port on which TLS connections to the server are being
+# accepted. You MUST have a CA-verified certificate on this
+# port. Self signed certificates are not acceptable.
+# preload - Whether client developers can include your certificate in
+# preload lists.
+#
+# <sts host="*.example.com" duration="5m" port="6697" preload="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Join flood module: Adds support for join flood protection +j X:Y.
+# Closes the channel for N seconds if X users join in Y seconds.
+#<module name="joinflood">
+#
+# duration: The number of seconds to close a channel for when it is
+# being flooded with joins.
+#
+# bootwait: The number of seconds to disengage joinflood for after
+# a server boots. This allows users to reconnect without
+# being throttled by joinflood.
+#
+# splitwait: The number of seconds to disengage joinflood for after
+# a server splits. This allows users to reconnect without
+# being throttled by joinflood.
+#
+#<joinflood duration="1m"
+# bootwait="30s"
+# splitwait="30s">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Anti auto rejoin: Adds support for prevention of auto-rejoin (+J).
-#<module name="m_kicknorejoin.so">
-# Set the maximum time that is accepted as a parameter for +J here.
-#<kicknorejoin maxtime="1m">
+#<module name="kicknorejoin">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Knock module: Adds the /KNOCK command and channel mode +K.
-#<module name="m_knock.so">
+#<module name="knock">
#
# This setting specifies what to do when someone successfully /KNOCKs.
# If set to "notice", then a NOTICE will be sent to the channel.
# If set to "both" then (surprise!) both will be sent.
#<knock notify="notice">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# LDAP module: Allows other SQL modules to access a LDAP database
+# through a unified API.
+# This modules is in extras. Re-run configure with:
+# ./configure --enable-extras ldap
+# and run make install, then uncomment this module to enable it.
+#
+#<module name="ldap">
+#<database module="ldap" id="ldapdb" server="ldap://localhost" binddn="cn=Manager,dc=inspircd,dc=org" bindauth="mysecretpass" searchscope="subtree">
+# The server parameter indicates the LDAP server to connect to. The #
+# ldap:// style scheme before the hostname proper is MANDATORY. #
+# #
+# The binddn and bindauth indicate the DN to bind to for searching, #
+# and the password for the distinguished name. Some LDAP servers will #
+# allow anonymous searching in which case these two values do not #
+# need defining, otherwise they should be set similar to the examples #
+# above. #
+# #
+# The searchscope value indicates the subtree to search under. On our #
+# test system this is 'subtree'. Your mileage may vary. #
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LDAP authentication module: Adds the ability to authenticate users #
-# via LDAP. This is an extra module which must be enabled explicitly #
-# by symlinking it from modules/extra, and requires the OpenLDAP libs #
-# This module is in extras. To enable it, Re-run configure with: #
-# ./configure --enable-extras=m_ldapauth.cpp #
-# and run make install, then uncomment this module. #
-#<module name="m_ldapauth.so">
+# via LDAP. #
+#<module name="ldapauth">
# #
# Configuration: #
# #
-# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" #
+# <ldapauth dbid="ldapdb" #
+# baserdn="ou=People,dc=brainbox,dc=cc" #
# attribute="uid" #
-# server="ldap://brainwave.brainbox.cc" #
-# allowpattern="Guest*" #
+# allowpattern="Guest* Bot*" #
# killreason="Access denied" #
-# searchscope="subtree" #
-# binddn="cn=Manager,dc=brainbox,dc=cc" #
-# bindauth="mysecretpass" #
# verbose="yes" #
# host="$uid.$ou.inspircd.org" #
# useusername="no"> #
# The attribute value indicates the attribute which is used to locate #
# a user account by name. On POSIX systems this is usually 'uid'. #
# #
+# The allowpattern value allows you to specify a space separated list #
+# of wildcard masks which will always be allowed to connect #
+# regardless of if they have an account, for example guest and bot #
+# users. #
+# #
# The useusername setting chooses whether the user's username or #
# nickname is used when locating a user account, if a username isn't #
# provided in PASS. #
# #
-# The server parameter indicates the LDAP server to connect to. The #
-# ldap:// style scheme before the hostname proper is MANDATORY. #
-# #
-# The allowpattern value allows you to specify a wildcard mask which #
-# will always be allowed to connect regardless of if they have an #
-# account, for example guest users. #
-# #
# Killreason indicates the QUIT reason to give to users if they fail #
# to authenticate. #
# #
-# The searchscope value indicates the subtree to search under. On our #
-# test system this is 'subtree'. Your mileage may vary. #
-# #
# Setting the verbose value causes an oper notice to be sent out for #
# every failed authentication to the server, with an error string. #
# #
-# The binddn and bindauth indicate the DN to bind to for searching, #
-# and the password for the distinguished name. Some LDAP servers will #
-# allow anonymous searching in which case these two values do not #
-# need defining, otherwise they should be set similar to the examples #
-# above. #
-# #
# ldapwhitelist indicates that clients connecting from an IP in the #
# provided CIDR do not need to authenticate against LDAP. It can be #
# repeated to whitelist multiple CIDRs. #
# #
# ldaprequire allows further filtering on the LDAP user, by requiring #
-# certain LDAP attibutes to have a given value. It can be repeated, #
+# certain LDAP attributes to have a given value. It can be repeated, #
# in which case the list will act as an OR list, that is, the #
# authentication will succeed if any of the requirements in the list #
# is satisfied. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LDAP oper configuration module: Adds the ability to authenticate #
-# opers via LDAP. This is an extra module which must be enabled #
-# explicitly by symlinking it from modules/extra, and requires the #
-# OpenLDAP libs. Re-run configure with: #
-# ./configure --enable-extras=m_ldapoper.cpp
-# and run make install, then uncomment this module to enable it. #
-#<module name="m_ldapoper.so">
+# opers via LDAP. #
+#<module name="ldapoper">
# #
# Configuration: #
# #
-# <ldapoper baserdn="ou=People,dc=brainbox,dc=cc"
-# server="ldap://brainwave.brainbox.cc"
-# searchscope="subtree"
-# binddn="cn=Manager,dc=brainbox,dc=cc"
-# bindauth="mysecretpass"
+# <ldapoper dbid="ldapdb"
+# baserdn="ou=People,dc=brainbox,dc=cc"
# attribute="uid">
# #
# Available configuration items are identical to the same items in #
-# m_ldapauth above (except for the verbose setting, that is only #
-# supported in m_ldapauth). #
+# ldapauth above (except for the verbose setting, that is only #
+# supported in ldapauth). #
# Please always specify a password in your <oper> tags even if the #
# opers are to be authenticated via LDAP, so in case this module is #
# not loaded the oper accounts are still protected by a password. #
# If your server is locked and you get disconnected, do a REHASH from #
# shell to open up again. #
# This module is oper-only.
-#<module name="m_lockserv.so">
+#<module name="lockserv">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Map hiding module: replaces /MAP and /LINKS output to users with a #
-# message to see a website, set by maphide="http://test.org/map" in #
+# message to see a website, set by maphide="https://test.org/map" in #
# the <security> tag, instead. #
-#<module name="m_maphide.so">
+#<module name="maphide">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Message flood module: Adds message/notice flood protection via
# channel mode +f.
-#<module name="m_messageflood.so">
+#<module name="messageflood">
+#
+# The weight to give each message type. TAGMSGs are considered to be
+# 1/5 of a NOTICE or PRIVMSG to avoid users being accidentally flooded
+# out of a channel by automatic client features such as typing
+# notifications.
+#<messageflood notice="1.0" privmsg="1.0" tagmsg="0.2">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MLOCK module: Adds support for server-side enforcement of services
# side MLOCKs. Basically, this module suppresses any mode change that
# would likely be immediately bounced by services.
-#<module name="m_mlock.so">
+#<module name="mlock">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# MsSQL module: Allows other SQL modules to access MS SQL Server
-# through a unified API.
-# This module is in extras. Re-run configure with:
-# ./configure --enable-extras=m_mssql.cpp
-# and run make install, then uncomment this module to enable it.
-#<module name="m_mssql.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_mssql.so is more complex than described here, see wiki for more #
-# info https://wiki.inspircd.org/Modules/2.0/mssql #
+# Modenotice module: Adds the /MODENOTICE command that allows opers to
+# send notices to all users having the given user mode(s) set.
+#<module name="modenotice">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Monitor module: Adds support for MONITOR which is used by clients to
+# maintain notify lists.
+#<module name="monitor">
#
-#<database module="mssql" name="db" user="user" pass="pass" host="localhost" id="db1">
+# Set the maximum number of entries on a user's monitor list below.
+#<monitor maxentries="30">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MySQL module: Allows other SQL modules to access MySQL databases
# through a unified API.
# This module is in extras. Re-run configure with:
-# ./configure --enable-extras=m_mysql.cpp
+# ./configure --enable-extras mysql
# and run make install, then uncomment this module to enable it.
-#<module name="m_mysql.so">
+#<module name="mysql">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_mysql.so is more complex than described here, see the wiki for #
-# more: https://wiki.inspircd.org/Modules/2.0/mysql #
+# mysql is more complex than described here, see the docs for more #
+# info: https://docs.inspircd.org/3/modules/mysql #
#
#<database module="mysql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database2">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Named modes module: Allows for the display and set/unset of channel
# modes via long-form mode names via +Z and the /PROP command.
-# For example, to set a ban, do /mode #channel +Z ban=foo!bar@baz or
+# For example, to set a ban, do /MODE #channel +Z ban=foo!bar@baz or
# /PROP #channel ban=foo!bar@baz
-#<module name="m_namedmodes.so">
+#<module name="namedmodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# NAMESX module: Provides support for the NAMESX extension which allows
-# clients to see all the prefixes set on a user without getting confused.
-# This is supported by mIRC, x-chat, klient, and maybe more.
-#<module name="m_namesx.so">
+# NAMESX module: Provides support for the IRCv3 multi-prefix capability
+# and legacy NAMESX extension which allow clients to see all the prefix
+# modes set on a user.
+#<module name="namesx">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# National characters module:
# 1) Allows using national characters in nicknames.
# 2) Allows using custom (national) casemapping over the network.
-#<module name="m_nationalchars.so">
+#
+# This module is incredibly poorly written and documented. You should
+# probably use the codepage module instead for 8-bit codepages.
+#<module name="nationalchars">
#
# file - Location of the file which contains casemapping rules. If this
# is a relative path then it is relative to "<PWD>/../locales"
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nickchange flood protection module: Provides channel mode +F X:Y
# which allows up to X nick changes in Y seconds.
-#<module name="m_nickflood.so">
+#<module name="nickflood">
+#
+# The time period to prevent nick changes for:
+#<nickflood duration="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
# user from changing their nick again until unlocked.
# This module is oper-only.
# To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks.
-#<module name="m_nicklock.so">
+#<module name="nicklock">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No CTCP module: Adds the channel mode +C to block CTCPs and extban
-# 'C' to block CTCPs sent by specific users.
-#<module name="m_noctcp.so">
+# No CTCP module: Adds the channel mode +C and user mode +T to block
+# CTCPs and extban 'C' to block CTCPs sent by specific users.
+#<module name="noctcp">
+#
+# The +T user mode is not enabled by default to enable link compatibility
+# with 2.0 servers. You can enable it by uncommenting this:
+#<noctcp enableumode="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No kicks module: Adds the +Q channel mode and the Q: extban to deny
# certain users from kicking.
-#<module name="m_nokicks.so">
+#<module name="nokicks">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No nicks module: Adds the +N channel mode, as well as the 'N' extban.
# +N stops all users from changing their nick, the N extban stops
# anyone from matching a +b N:nick!user@host mask from changing their
# nick.
-#<module name="m_nonicks.so">
+#<module name="nonicks">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No part message module: Adds extban 'p' to block part messages from #
# matching users. #
-#<module name="m_nopartmsg.so">
+#<module name="nopartmsg">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No notice module: Adds the channel mode +T and the extban 'T' to
# block specific users from noticing the channel.
-#<module name="m_nonotice.so">
+#<module name="nonotice">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Network business join module:
# Allows an oper to join a channel using /OJOIN, giving them +Y on the
-# channel which makes them immune to kick/deop/etc.
-#<module name="m_ojoin.so">
+# channel which makes them immune to kicks.
+#<module name="ojoin">
#
# Specify the prefix that +Y will grant here.
# Leave 'prefix' empty if you do not wish +Y to grant a prefix.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper channels mode: Adds the +O channel mode and extban O:<mask>
# to ban, except, etc. specific oper types. For example
-# /mode #channel +iI O:* is equivalent to channel mode +O, but you
+# /MODE #channel +iI O:* is equivalent to channel mode +O, but you
# may also set +iI O:AdminTypeOnly to only allow admins.
# Modes +I and +e work in a similar fashion.
-#<module name="m_operchans.so">
+#<module name="operchans">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper join module: Auto-joins opers to a channel upon oper-up.
-# This module is oper-only. For the user equivalent, see m_conn_join.
-#<module name="m_operjoin.so">
+# This module is oper-only. For the user equivalent, see the conn_join
+# module.
+#<module name="operjoin">
#
#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you are using the m_operjoin.so module, specify options here: #
+# If you are using the operjoin module, specify options here: #
# #
# channel - The channel name to join, can also be a comma #
# separated list e.g. "#channel1,#channel2". #
# type "m_operlog" at default loglevel), and optionally to the 'r'
# snomask.
# This module is oper-only.
-#<module name="m_operlog.so">
+#<module name="operlog">
#
# If the following option is on then all oper commands will be sent to
-# the snomask 'r'. The default is off.
-#<operlog tosnomask="off">
+# the snomask 'r'. The default is no.
+#<operlog tosnomask="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper prefixing module: Adds a channel prefix mode +y which is given
-# to all IRC operators automatically on all channels they are in.
+# to all server operators automatically on all channels they are in.
# This prefix mode is more powerful than channel op and other regular
# prefix modes.
#
-# Load this module if you want all your IRC operators to have channel
-# operator powers.
-#<module name="m_operprefix.so">
+# Load this module if you want all your server operators to have
+# channel operator powers.
+#<module name="operprefix">
#
# You may additionally customise the prefix character.
#<operprefix prefix="!">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MOTD module: Provides support for separate message of the day
+# Oper MOTD module: Provides support for a separate message of the day
# on oper-up.
# This module is oper-only.
-#<module name="m_opermotd.so">
+#<module name="opermotd">
#
#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you are using the m_opermotd.so module, specify the motd here. #
+# If you are using the opermotd module, specify the motd file here. #
# #
# onoper - If on, the message is sent on /OPER, otherwise it's #
# only sent when /OPERMOTD is used. #
# #
-# processcolors - Allow color codes to be processed in the opermotd. #
-# Read the comment above <connect:allowmotdcolors> in #
-# inspircd.conf.example for details. #
-# #
-#<opermotd file="conf/examples/opermotd.txt.example" onoper="yes" processcolors="false">
+#<opermotd file="examples/opermotd.txt.example" onoper="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override.
# This module is oper-only.
-#<module name="m_override.so">
+#<module name="override">
#
#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# m_override.so is too complex it describe here, see the wiki: #
-# https://wiki.inspircd.org/Modules/2.0/override #
+# Much of override's configuration relates to your oper blocks. #
+# For more information on how to allow opers to override, see: #
+# https://docs.inspircd.org/3/modules/override #
+# #
+# noisy - If enabled, all oper overrides will be announced #
+# via channel notice. #
+# #
+# requirekey - If enabled, overriding on join requires a channel #
+# key of "override" to be specified. #
+# #
+# enableumode - If enabled, user mode +O is required for override. #
+# #
+#<override noisy="yes" requirekey="no" enableumode="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper levels module: Gives each oper a level and prevents actions
# being taken by lower level opers against higher level opers.
# Specify the level as the 'level' parameter of the <type> tag.
# This module is oper-only.
-#<module name="m_operlevels.so">
+#<module name="operlevels">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper modes module: Allows you to specify modes to add/remove on oper.
# Specify the modes as the 'modes' parameter of the <type> tag
# and/or as the 'modes' parameter of the <oper> tag.
-# This module is oper-only. For the user equivalent, see m_conn_umodes.
-#<module name="m_opermodes.so">
+# This module is oper-only. For the user equivalent, see the
+# conn_umodes module.
+#<module name="opermodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Password forwarding module: Forwards a password users can send on
# connect to the specified client below. The client is usually NickServ
# and this module is usually used to authenticate users with NickServ
# using their connect password.
-#<module name="m_passforward.so">
+#<module name="passforward">
<passforward
# nick: nick to forward connect passwords to.
# cmd: Command for the user to run when it receives a connect
# password.
- cmd="PRIVMSG $nickrequired :IDENTIFY $pass">
+ cmd="SQUERY $nickrequired :IDENTIFY $pass">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Password hash module: Allows hashed passwords to be used.
-# To be useful, a hashing module like m_sha256.so also needs to be loaded.
-#<module name="m_password_hash.so">
+# To be useful, a hashing module like bcrypt also needs to be loaded.
+#<module name="password_hash">
#
#-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
#
#
# <oper name="Brain"
# host="ident@dialup15.isp.test.com"
-# hash="sha256"
-# password="01ba4719c80b6fe911b091a7c05124b64eeece964e09c058ef8f9805daca546b"
+# hash="bcrypt"
+# password="$2a$10$Mss9AtHHslZTLBrXqM0FB.JBwD.UTSu8A48SfrY9exrpxbsRiRTbO"
# type="NetAdmin">
#
-# Starting from 2.0, you can use a more secure salted hash that prevents simply
-# looking up the hash's value in a rainbow table built for the hash.
+# If you are using a hash algorithm which does not perform salting you can use
+# HMAC to salt your passwords in order to prevent them from being looked up in
+# a rainbow table.
+#
# hash="hmac-sha256" password="lkS1Nbtp$CyLd/WPQXizsbxFUTqFRoMvaC+zhOULEeZaQkUJj+Gg"
#
# Generate hashes using the /MKPASSWD command on the server.
# Don't run it on a server you don't trust with your password.
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# PBKDF2 module: Allows other modules to generate PBKDF2 hashes,
+# usually for cryptographic uses and security.
+# This module relies on other hash providers (e.g. SHA256).
+#<module name="pbkdf2">
+#
+# iterations: Iterations the hashing function runs when generating new
+# hashes.
+# length: Length in bytes of the derived key.
+#<pbkdf2 iterations="12288" length="32">
+# You can override these values with specific values
+# for specific providers if you want to. Example given for SHA256.
+#<pbkdf2prov hash="sha256" iterations="24576">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Permanent channels module: Channels with the permanent channel mode
# will remain open even after everyone else has left the channel, and
# channels -may- need support from your Services package to function
# properly with them. This adds channel mode +P.
# This module is oper-only.
-#<module name="m_permchannels.so">
+#<module name="permchannels">
#
-# If you like, m_permchannels can write a config file of permanent channels
+# If you like, this module can write a config file of permanent channels
# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
# If you want to do this, set the filename below, and uncomment the include.
#
-# If 'listmodes' is true then all list modes (+b, +I, +e, +g...) will be
-# saved. Defaults to false.
-#<permchanneldb filename="data/permchannels.conf" listmodes="true">
-#<include file="data/permchannels.conf">
+# If 'listmodes' is yes then all list modes (+b, +I, +e, +g...) will be
+# saved. Defaults to no.
+#
+# 'saveperiod' determines how often to check if the database needs to be
+# saved to disk. Defaults to every five seconds.
+#<permchanneldb filename="permchannels.conf"
+# listmodes="yes"
+# saveperiod="5s">
+#<include file="permchannels.conf">
#
# You may also create channels on startup by using the <permchannels> block.
-# Don't forget to set them +P in the modes, or they won't stay permanent.
#<permchannels channel="#opers" modes="isP" topic="Opers only.">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# PostgreSQL module: Allows other SQL modules to access PgSQL databases
# through a unified API.
# This module is in extras. Re-run configure with:
-# ./configure --enable-extras=m_pgsql.cpp
+# ./configure --enable-extras pgsql
# and run make install, then uncomment this module to enable it.
-#<module name="m_pgsql.so">
+#<module name="pgsql">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_pgsql.so is more complex than described here, see the wiki for #
-# more: https://wiki.inspircd.org/Modules/2.0/pgsql #
+# pgsql is more complex than described here, see the docs for #
+# more: https://docs.inspircd.org/3/modules/pgsql #
#
#<database module="pgsql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database" ssl="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Muteban: Implements extended ban 'm', which stops anyone matching
# a mask like +b m:nick!user@host from speaking on channel.
-#<module name="m_muteban.so">
+#<module name="muteban">
+#
+# If notifyuser is set to no, the user will not be notified when
+# their message is blocked.
+#<muteban notifyuser="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Random quote module: Provides a random quote on connect.
# NOTE: Some of these may mimic fatal errors and confuse users and
# opers alike - BEWARE!
-#<module name="m_randquote.so">
+#<module name="randquote">
#
#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_randquote.so module, then #
-# specify below the path to the quotes file. #
+# Optional - If you specify to use the randquote module, then specify #
+# below the path to the quotes file. #
# #
#<randquote file="quotes.txt">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Redirect module: Adds channel redirection mode +L. #
-# Optional: <redirect:antiredirect> to add usermode +L to stop forced #
-# redirection and instead print an error. #
-# #
-# Note: You can not update this with a simple rehash, it requires #
-# reloading the module for it to take effect. #
-# This also breaks linking to servers that do not have the option. #
-# This defaults to false for the 2.0 version, it will be enabled in #
-# all the future versions. #
-#<module name="m_redirect.so">
-#<redirect antiredirect="true">
+# Redirect module: Adds channel mode +L which redirects users to #
+# another channel when the channel has reached its user limit and #
+# user mode +L which stops redirection. #
+#<module name="redirect">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for glob or wildcard (?/*) matching.
-# You must have at least 1 provider loaded to use m_filter or m_rline
+# You must have at least 1 provider loaded to use the filter or R-line
# modules. This module has no additional requirements, as it uses the
# matching already present in InspIRCd core.
-#<module name="m_regex_glob.so">
+#<module name="regex_glob">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for PCRE (Perl-Compatible Regular
# Expressions). You need libpcre installed to compile and load this
-# module. You must have at least 1 provider loaded to use m_filter or
-# m_rline.
-#<module name="m_regex_pcre.so">
+# module. You must have at least 1 provider loaded to use the filter or
+# R-line modules.
+#<module name="regex_pcre">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Regular Expression Provider for RE2 Regular Expressions.
+# You need libre2 installed and in your include/library paths in order
+# to compile and load this module.
+#<module name="regex_re2">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for POSIX regular expressions.
# You shouldn't need any additional libraries on a POSIX-compatible
# system (i.e.: any Linux, BSD, but not Windows). You must have at
-# least 1 provider loaded to use m_filter or m_rline.
+# least 1 provider loaded to use the filter or R-line modules.
# On POSIX-compliant systems, regex syntax can be found by using the
# command: 'man 7 regex'.
-#<module name="m_regex_posix.so">
+#<module name="regex_posix">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for C++11 std::regex regular expressions.
# You should verify that std::regex is supported by your setup before
# using this module, as it may compile normally but won't do anything
# on some implementations.
-#<module name="m_regex_stdlib.so">
+#<module name="regex_stdlib">
#
# Specify the regular expression engine to use here. Valid settings are
# bre, ere, awk, grep, egrep, ecmascript (default if not specified).
# if you are most familiar with the syntax of /SPAMFILTER from there,
# this is the provider you want. You need libtre installed in order
# to compile and load this module.
-#<module name="m_regex_tre.so">
+#<module name="regex_tre">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Registered users only channel creation module. If enabled, only
-# registered users and opers can create new channels.
+# Remove module: Adds the /REMOVE command which is a peaceful
+# alternative to /KICK. It also provides the /FPART command which works
+# in the same way as /REMOVE.
+#<module name="remove">
+#
+# supportnokicks: If yes, /REMOVE is not allowed on channels where the
+# nokicks (+Q) mode is set. Defaults to no.
+# protectedrank: Members having this rank or above may not be /REMOVE'd
+# by anyone. Set to 0 to disable this feature. Defaults to 50000.
+#<remove supportnokicks="yes" protectedrank="50000">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Repeat module: Allows to block, kick or ban upon similar messages
+# being uttered several times. Provides channel mode +E.
+#
+# Syntax: [~|*]<lines>:<sec>[:<difference>][:<backlog>]
+# ~ is to block, * is to ban, default is kick.
+# lines - In mode 1, the amount of lines that has to match consecutively.
+# In mode 2, the size of the backlog to keep for matching.
+# seconds - How old the message has to be before it's invalidated.
+# difference - Edit distance, in percent, between two strings to trigger on.
+# backlog - When set, the function goes into mode 2. In this mode the
+# function will trigger if this many of the last <lines> matches.
+#
+# As this module can be rather CPU-intensive, it comes with some options.
+# maxbacklog - Maximum size that can be specified for backlog. 0 disables
+# multiline matching.
+# maxdistance - Max percentage of difference between two lines we'll allow
+# to match. Set to 0 to disable edit-distance matching.
+# maxlines - Max lines of backlog to match against.
+# maxtime - Maximum period of time a user can set. 0 to allow any.
+# size - Maximum number of characters to check for, can be used to
+# truncate messages before they are checked, resulting in
+# less CPU usage. Increasing this beyond 512 doesn't have
+# any effect, as the maximum length of a message on IRC
+# cannot exceed that.
+# kickmessage - Kick message when * is specified
+#<repeat maxbacklog="20"
+# maxdistance="50"
+# maxlines="20"
+# maxtime="0s"
+# size="512"
+# kickmessage="Repeat flood">
+#<module name="repeat">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restricted channels module: Allows only opers with the
+# channels/restricted-create priv and/or registered users to
+# create channels.
#
# You probably *DO NOT* want to load this module on a public network.
#
-#<module name="m_regonlycreate.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Remove module: Adds the /REMOVE command which is a peaceful
-# alternative to /KICK.
-#<module name="m_remove.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels.
+#<module name="restrictchans">
#
-# You probably *DO NOT* want to load this module on a public network.
+# allowregistered: should registered users be allowed to bypass the restrictions?
+#<restrictchans allowregistered="no">
#
-#<module name="m_restrictchans.so">
+# Allow any channel matching #user-* to be created, bypassing restrictchans checks
+#<allowchannel name="#user-*">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restrict message module: Allows users to only message opers.
#
# You probably *DO NOT* want to load this module on a public network.
#
-#<module name="m_restrictmsg.so">
-#
-# Uncomment this to allow users to message ulines (e.g. services):
-#<restrictmsg uline="yes">
+#<module name="restrictmsg">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# R-Line module: Ban users through regular expression patterns.
-#<module name="m_rline.so">
+# R-line module: Ban users through regular expression patterns.
+#<module name="rline">
#
#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
#
# If you wish to re-check a user when they change nickname (can be
# useful under some situations, but *can* also use CPU with more users
# on a server) then set 'matchonnickchange' to yes.
+# If you additionally want Z-lines to be added on matches, then
+# set 'zlineonmatch' to yes.
# Also, this is where you set what Regular Expression engine is to be
-# used. If you ever change it while running, all of your R-Lines will
-# be wiped. This is the regex engine used by all R-Lines set, and
-# m_regex_<engine>.so must be loaded, or rline will be non-functional
+# used. If you ever change it while running, all of your R-lines will
+# be wiped. This is the regex engine used by all R-lines set, and
+# regex_<engine> must be loaded, or rline will be non-functional
# until you load it or change the engine to one that is loaded.
#
-#<rline matchonnickchange="yes" engine="pcre">
+#<rline matchonnickchange="yes" zlineonmatch="no" engine="pcre">
#
-# Generally, you will NOT want to use 'glob' here, as this turns
-# rline into just another gline. The exceptions are that rline will
+# Generally, you will NOT want to use 'glob' here, as this turns an
+# R-line into just another G-line. The exceptions are that R-lines will
# always use the full "nick!user@host realname" string, rather than only
# user@host, but beware that only the ? and * wildcards are available,
# and are the only way to specify where the space can occur if you do
# use glob. For this reason, is recommended to use a real regex engine
# so that at least \s or [[:space:]] is available.
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# RMODE module: Adds the /RMODE command.
+# Allows channel operators to remove list modes en masse, optionally
+# matching a glob-based pattern.
+# Syntax: /RMODE <channel> <mode> [<pattern>]
+# E.g. '/RMODE #channel b m:*' will remove all mute extbans on the channel.
+#<module name="rmode">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command which forcibly joins a user
# to the given channel.
# This module is oper-only.
# To use, SAJOIN must be in one of your oper class blocks.
-#<module name="m_sajoin.so">
+# Opers need the users/sajoin-others priv to be able to /SAJOIN users
+# other than themselves.
+#<module name="sajoin">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAKICK module: Adds the /SAKICK command which kicks a user from the
# given channel.
# This module is oper-only.
# To use, SAKICK must be in one of your oper class blocks.
-#<module name="m_sakick.so">
+#<module name="sakick">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAMODE module: Adds the /SAMODE command which allows server operators
# to change modes on a channel without requiring them to have any
-# channel priviliges. Also allows changing user modes for any user.
+# channel privileges. Also allows changing user modes for any user.
# This module is oper-only.
# To use, SAMODE must be in one of your oper class blocks.
-#<module name="m_samode.so">
+#<module name="samode">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SANICK module: Adds the /SANICK command which allows opers to change
# users' nicks.
# This module is oper-only.
# To use, SANICK must be in one of your oper class blocks.
-#<module name="m_sanick.so">
+#<module name="sanick">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAPART module: Adds the /SAPART command which forcibly parts a user
# from a channel.
# This module is oper-only.
# To use, SAPART must be in one of your oper class blocks.
-#<module name="m_sapart.so">
+#<module name="sapart">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAQUIT module: Adds the /SAQUIT command which forcibly quits a user.
# This module is oper-only.
# To use, SAQUIT must be in one of your oper class blocks.
-#<module name="m_saquit.so">
+#<module name="saquit">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SATOPIC module: Adds the /SATOPIC command which allows changing the
-# topic on a channel without requiring any channel priviliges.
+# topic on a channel without requiring any channel privileges.
# This module is oper-only.
# To use, SATOPIC must be in one of your oper class blocks.
-#<module name="m_satopic.so">
+#<module name="satopic">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SASL authentication module: Provides support for IRC Authentication
-# Layer via AUTHENTICATE. Note: You also need to have m_cap.so loaded
+# Layer via AUTHENTICATE. Note: You also need to have cap loaded
# for SASL to work.
-#<module name="m_sasl.so">
-# Define the following to your services server name to improve security
-# by ensuring the SASL messages are only sent to the services server
-# and not to all connected servers. This prevents a rogue server from
-# capturing SASL messages.
-#<sasl target="services.mynetwork.com">
+#<module name="sasl">
+
+# You must define <sasl:target> to the name of your services server so
+# that InspIRCd knows where to send SASL authentication messages and
+#Â when it should enable the SASL capability.
+# You can also define <sasl:requiressl> to require users to use TLS (SSL)
+# in order to be able to use SASL.
+#<sasl target="services.mynetwork.com"
+# requiressl="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Secure list module: Prevent /LIST in the first minute of connection,
# crippling most spambots and trojan spreader bots.
-#<module name="m_securelist.so">
+#<module name="securelist">
#
#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# securelist blocking these sites from listing, define exception tags #
# as shown below: #
#<securehost exception="*@*.netsplit.de">
-#<securehost exception="*@*.ircdriven.com">
-#<securehost exception="*@*.ircs.me">
# #
-# Define the following variable to change how long a user must wait #
-# before issuing a LIST. If not defined, defaults to 60 seconds. #
+# exemptregistered - Whether the waiting period applies to users who #
+# are logged in to a services account. #
+# Defaults to no. #
+# #
+# showmsg - Whether to tell users that they need to wait for a while #
+# before they can use the /LIST command. #
+# Defaults to no. #
# #
-#<securelist waittime="60"> #
+# waittime - The time period that a user must be connected for before #
+# they can use the /LIST command. #
+# Defaults to 1 minute. #
+# #
+#<securelist exemptregistered="yes"
+# showmsg="yes"
+# waittime="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Servprotect module: Provides support for Austhex style +k /
# UnrealIRCD +S services mode.
-#<module name="m_servprotect.so">
+#<module name="servprotect">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# See nicks module: Adds snomask +n and +N which show local and remote
# nick changes.
# This module is oper-only.
-#<module name="m_seenicks.so">
+#<module name="seenicks">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set idle module: Adds a command for opers to change their idle time.
# This module is oper-only.
# To use, SETIDLE must be in one of your oper class blocks.
-#<module name="m_setidle.so">
+#<module name="setidle">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Services support module: Adds several usermodes such as +R and +M.
+# Services support module: Adds several user modes such as +R and +M.
# This module implements the 'identified' state via account names,
# and is similar in operation to the way asuka and ircu handle services.
#
# +b R: (stop matching account names from joining)
# +b U:n!u@h (blocks matching unregistered users)
#
-#<module name="m_services_account.so">
+#<module name="services_account">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Sethost module: Adds the /SETHOST command.
# This module is oper-only.
# To use, SETHOST must be in one of your oper class blocks.
-# See m_chghost for how to customise valid chars for hostnames.
-#<module name="m_sethost.so">
+# See the chghost module for how to customise valid chars for hostnames.
+#<module name="sethost">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Setident module: Adds the /SETIDENT command.
# This module is oper-only.
# To use, SETIDENT must be in one of your oper class blocks.
-#<module name="m_setident.so">
+#<module name="setident">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SETNAME module: Adds the /SETNAME command.
-#<module name="m_setname.so">
+#<module name="setname">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SETNAME CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# operonly - Whether the SETNAME command should only be usable by #
+# server operators. Defaults to no. #
+# #
+# notifyopers - Whether to send a snotice to snomask `a` when a user #
+# changes their real name. Defaults to to yes if #
+# oper-only and no if usable by everyone. #
+# #
+#<setname notifyopers="yes"
+# operonly="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Serverban: Implements extended ban 's', which stops anyone connected
# to a server matching a mask like +b s:server.mask.here from joining.
-#<module name="m_serverban.so">
+# Wildcards are accepted.
+#<module name="serverban">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SHA1 module: Allows other modules to generate SHA1 hashes.
+# Required by the WebSocket module.
+#<module name="sha1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Show whois module: Adds the +W usermode which allows opers to see
+# Showfile: Provides support for showing a text file to users when #
+# they enter a command. #
+# This module adds one command for each <showfile> tag that shows the #
+# given file to the user as a series of messages or numerics. #
+#<module name="showfile">
+# #
+#-#-#-#-#-#-#-#-#-#-# SHOWFILE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# name - The name of the command which displays this file. This is #
+# the only mandatory setting, all others are optional. #
+# file - The text file to be shown to the user. #
+# By default same as the command name. #
+# method - How should the file be shown? #
+# * numeric: Send contents using a numeric #
+# (similar to /MOTD; the default). #
+# * notice: Send contents as a series of notices. #
+# * msg: Send contents as a series of private messages. #
+# #
+# When using the method "numeric", the following extra settings are #
+# available: #
+# #
+# introtext - Introductory line, "Showing <name>" by default. #
+# intronumeric - Numeric used for the introductory line. #
+# numeric - Numeric used for sending the text itself. #
+# endtext - Ending line, "End of <name>" by default. #
+# endnumeric - Numeric used for the ending line. #
+# #
+#<showfile name="RULES"
+# file="rules.txt"
+# introtext="Server rules:"
+# endtext="End of server rules.">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Show whois module: Adds the +W user mode which allows opers to see
# when they are /WHOIS'd.
# This module is oper-only by default.
-#<module name="m_showwhois.so">
+#<module name="showwhois">
#
# If you wish, you may also let users set this mode. Only opers with the
-# users/auspex priv will see real hosts of people, though. This setting
-# is not reloadable via /REHASH, changing it requires /RELOADMODULE.
+# users/auspex priv will see real hosts of people, though.
#<showwhois opersonly="yes"
#
# You may also set whether or not users should receive whois notices,
# executing all except configured commands.
# This module is oper-only.
# To use, SHUN must be in one of your oper class blocks.
-#<module name="m_shun.so">
+#<module name="shun">
+#
+# Configuration:
#
-# You may also configure which commands you wish a user to be able to
-# perform when shunned. It should be noted that if a shunned user
-# issues QUIT or PART then their message will be removed, as if they
-# did not issue one.
+# affectopers: Whether server operators are exempt from shuns. This
+# option is deprecated; you should instead give exempt
+# server operators the servers/ignore-shun privilege.
+#
+# allowconnect: Whether to only apply shuns to users who are fully
+# connected to the server.
+#
+# allowtags: Whether to allow client tags to be attached to enabled
+# commands.
+#
+# cleanedcommands: The commands that, if enabled, should be cleaned
+# of any message content if a shunned user tries to
+# execute them.
+#
+# enabledcommands: The commands that a shunned user is allowed to
+# execute.
+#
+# notifyuser: Whether to notify shunned users that a command they tried
+# to execute has been blocked.
+#
+#<shun enabledcommands="ADMIN OPER PING PONG QUIT PART JOIN"
+# cleanedcommands="AWAY PART QUIT"
+# affectopers="no"
+# allowconnect="no"
+# allowtags="no"
+# notifyuser="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL mode module: Adds support for TLS (SSL)-only channels via the '+z'
+# channel mode, TLS (SSL)-only private messages via the '+z' user mode and
+# the 'z:' extban which matches TLS (SSL) client certificate fingerprints.
#
-# You can optionally let the user know that their command was blocked.
+# Does not do anything useful without a working TLS (SSL) module and the
+# sslinfo module (see below).
+#<module name="sslmodes">
#
-# You may also let SHUN affect opers (defaults to no).
-#<shun enabledcommands="ADMIN PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
+# The +z user mode is not enabled by default to enable link compatibility
+# with 2.0 servers. You can enable it by uncommenting this:
+#<sslmodes enableumode="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL channel mode module: Adds support for SSL-only channels via
-# channel mode +z and the 'z' extban which matches SSL client
-# certificate fingerprints.
-# Does not do anything useful without a working SSL module and the
-# m_sslinfo module (see below).
-#<module name="m_sslmodes.so">
+# SSL rehash signal module: Allows the TLS (SSL) modules to be rehashed by
+# sending SIGUSR1 to a running InspIRCd process.
+# This module is in extras. Re-run configure with:
+# ./configure --enable-extras sslrehashsignal
+# and run make install, then uncomment this module to enable it.
+#<module name="sslrehashsignal">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
+# GnuTLS SSL module: Adds support for TLS (SSL) connections using GnuTLS,
# if enabled. You must answer 'yes' in ./configure when asked or
# manually symlink the source for this module from the directory
# src/modules/extra, if you want to enable this, or it will not load.
-#<module name="m_ssl_gnutls.so">
+#<module name="ssl_gnutls">
#
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_ssl_gnutls.so is too complex to describe here, see the wiki: #
-# https://wiki.inspircd.org/Modules/2.0/ssl_gnutls #
+# ssl_gnutls is too complex to describe here, see the docs: #
+# https://docs.inspircd.org/3/modules/ssl_gnutls #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL info module: Allows users to retrieve information about other
-# users' peer SSL certificates and keys. This can be used by client
-# scripts to validate users. For this to work, one of m_ssl_gnutls.so
-# or m_ssl_openssl.so must be loaded. This module also adds the
-# "* <user> is using a secure connection" whois line, the ability for
-# opers to use SSL fingerprints to verify their identity and the
-# ability to force opers to use SSL connections in order to oper up.
-# It is highly recommended to load this module if you use SSL on your
-# network.
-# For how to use the oper features, please see the first example <oper> tag
-# in opers.conf.example.
+# users' peer TLS (SSL) certificates and keys via the SSLINFO command.
+# This can be used by client scripts to validate users. For this to
+# work, one of ssl_gnutls, ssl_mbedtls or ssl_openssl must be loaded.
+# This module also adds the "<user> is using a secure connection"
+# and "<user> has TLS (SSL) client certificate fingerprint <fingerprint>"
+# WHOIS lines, the ability for opers to use TLS (SSL) cert fingerprints to
+# verify their identity and the ability to force opers to use TLS (SSL)
+# connections in order to oper up. It is highly recommended to load
+# this module if you use TLS (SSL) on your network.
+# For how to use the oper features, please see the first
+# example <oper> tag in opers.conf.example.
+#
+#<module name="sslinfo">
#
-#<module name="m_sslinfo.so">
+# If you want to prevent users from viewing TLS (SSL) certificate information
+# and fingerprints of other users, set operonly to yes.
+#<sslinfo operonly="no">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# mbedTLS TLS (SSL) module: Adds support for TLS (SSL) connections using mbedTLS.
+#<module name="ssl_mbedtls">
+#
+#-#-#-#-#-#-#-#-#-#-#- MBEDTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# ssl_mbedtls is too complex to describe here, see the docs: #
+# https://docs.inspircd.org/3/modules/ssl_mbedtls #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
+# OpenSSL TLS (SSL) module: Adds support for TLS (SSL) connections using OpenSSL,
# if enabled. You must answer 'yes' in ./configure when asked or symlink
# the source for this module from the directory src/modules/extra, if
# you want to enable this, or it will not load.
-#<module name="m_ssl_openssl.so">
+#<module name="ssl_openssl">
#
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_ssl_openssl.so is too complex to describe here, see the wiki: #
-# https://wiki.inspircd.org/Modules/2.0/ssl_openssl #
+# ssl_openssl is too complex to describe here, see the docs: #
+# https://docs.inspircd.org/3/modules/ssl_openssl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Strip color module: Adds channel mode +S that strips mIRC color
-# codes from all messages sent to the channel.
-#<module name="m_stripcolor.so">
+# Strip color module: Adds channel mode +S that strips color codes and
+# all control codes except CTCP from all messages sent to the channel.
+#<module name="stripcolor">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Silence module: Adds support for the /SILENCE command, which allows
# users to have a server-side ignore list for their client.
-#<module name="m_silence.so">
+#<module name="silence">
#
# Set the maximum number of entries allowed on a user's silence list.
-#<silence maxentries="32">
+#<silence maxentries="32"
+#
+# Whether messages from U-lined servers will bypass silence masks.
+#exemptuline="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# databases through a unified API. #
# This module is in extras. Re-run configure with: #
-# ./configure --enable-extras=m_sqlite3.cpp
+# ./configure --enable-extras sqlite3
# and run make install, then uncomment this module to enable it. #
#
-#<module name="m_sqlite3.so">
+#<module name="sqlite3">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_sqlite.so is more complex than described here, see the wiki for #
-# more: https://wiki.inspircd.org/Modules/2.0/sqlite3 #
+# sqlite is more complex than described here, see the docs for more #
+# info: https://docs.inspircd.org/3/modules/sqlite3 #
#
#<database module="sqlite" hostname="/full/path/to/database.db" id="anytext">
# SQL authentication module: Allows IRCd connections to be tied into
# a database table (for example a forum).
#
-#<module name="m_sqlauth.so">
+#<module name="sqlauth">
#
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_sqlauth.so is too complex to describe here, see the wiki: #
-# https://wiki.inspircd.org/Modules/2.0/sqlauth #
+# sqlauth is too complex to describe here, see the docs: #
+# https://docs.inspircd.org/3/modules/sqlauth #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL oper module: Allows you to store oper credentials in an SQL table
+# SQL oper module: Allows you to store oper credentials in an SQL
+# table. You can add additional table columns like you would config
+# tags in opers.conf. Opers in opers.conf will override opers from
+# this module.
#
-#<module name="m_sqloper.so">
+#<module name="sqloper">
#
#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# dbid - Database ID to use (see SQL modules). #
-# hash - Hashing provider to use for password hashing. #
# #
-# See also: https://wiki.inspircd.org/Modules/2.0/sqloper #
+# See also: https://docs.inspircd.org/3/modules/sqloper #
# #
-#<sqloper dbid="1" hash="md5">
+#<sqloper dbid="1">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# StartTLS module: Implements STARTTLS, which allows clients #
+# connected to non TLS (SSL) enabled ports to enable TLS (SSL), if #
+# a proper TLS (SSL) module is loaded (either ssl_gnutls, #
+# ssl_mbedtls or ssl_openssl). #
+#<module name="starttls">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
+# SVSHold module: Implements SVSHOLD. Like Q-lines, but can only be #
# added/removed by Services. #
-#<module name="m_svshold.so">
-# If silent is true no snotices will be generated by SVSHOLD.
-#<svshold silent="false">
+#<module name="svshold">
+# SVSHOLD does not generate server notices by default, you can turn
+# notices on by uncommenting the next line.
+#<svshold silent="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SWHOIS module: Allows you to add arbitrary lines to user WHOIS.
# This module is oper-only.
# To use, SWHOIS must be in one of your oper class blocks.
-#<module name="m_swhois.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test module: Enable this to create a command useful in testing
-# flood control. To avoid accidental use on live networks, the server
-# name must contain ".test" to load the module
-#<module name="m_testnet.so">
+#<module name="swhois">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Timed bans module: Adds timed channel bans with the /TBAN command.
-#<module name="m_timedbans.so">
+#<module name="timedbans">
+# By default, it sends a notice to channel operators when timed ban is
+# set and when it is removed by server.
+#<timedbans sendnotice="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test line module: Adds the /TLINE command, used to test how many
# users a /GLINE or /ZLINE etc. would match.
# This module is oper-only.
# To use, TLINE must be in one of your oper class blocks.
-#<module name="m_tline.so">
+#<module name="tline">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Topiclock module: implements server-side topic locking to achieve deeper
# integration with services packages.
-#<module name="m_topiclock.so">
+#<module name="topiclock">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# UHNAMES support module: Adds support for the IRCX style UHNAMES
-# extension, which displays ident and hostname in the names list for
-# each user, saving clients from doing a WHO on the channel.
-# If a client does not support UHNAMES it will not enable it, this will
-# not break incompatible clients.
-#<module name="m_uhnames.so">
+# UHNAMES support module: Adds support for the IRCv3 userhost-in-names
+# capability and legacy UHNAMES extension which display the ident and
+# hostname of users in the NAMES list.
+#<module name="uhnames">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Uninvite module: Adds the /UNINVITE command which lets users remove
# pending invites from channels without waiting for the user to join.
-#<module name="m_uninvite.so">
+#<module name="uninvite">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Userip module: Adds the /USERIP command.
# Allows users to query their own IP, also allows opers to query the IP
# of anyone else.
-#<module name="m_userip.so">
+#<module name="userip">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Vhost module: Adds the VHOST command which allows for adding virtual
# hosts which are accessible using a username and password in the config.
-#<module name="m_vhost.so">
+#<module name="vhost">
#
#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# pass - Password for the vhost. #
# #
# hash - The hash for the specific user (optional) #
-# m_password_hash.so and a hashing module must be loaded #
-# for this to work. #
+# password_hash and a hashing module must be loaded for #
+# this to work. #
# #
# host - Vhost to set. #
#
#<vhost user="some_username" pass="some_password" host="some.host.test.cc">
-#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host.example.com">
+#<vhost user="foo" password="$2a$10$iTuYLT6BRhRlOgzfsW9oPe62etW.oXwSpyKw5rJit64SGZanLXghO" hash="bcrypt" host="some.other.host.example.com">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
# maintain notify lists.
-#<module name="m_watch.so">
+#<module name="watch">
#
# Set the maximum number of entries on a user's watch list below.
-#<watch maxentries="32">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
+#<watch maxwatch="32">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# WebSocket module: Adds HTML5 WebSocket support.
+# Specify hook="websocket" in a <bind> tag to make that port accept
+# WebSocket connections. Compatible with TLS (SSL).
+# Requires SHA-1 hash support available in the sha1 module.
+#<module name="websocket">
+#
+# proxyranges: A space-delimited list of glob or CIDR matches to trust
+# the X-Real-IP or X-Forwarded-For headers from. If enabled
+# the server will use the IP address specified by those HTTP
+# headers. You should NOT enable this unless you are using
+# a HTTP proxy like nginx as it will allow IP spoofing.
+# sendastext: Whether to re-encode messages as UTF-8 before sending to
+# WebSocket clients. This is recommended as the WebSocket
+# protocol requires all text frames to be sent as UTF-8.
+# If you do not have this enabled messages will be sent as
+# binary frames instead.
+#<websocket proxyranges="192.0.2.0/24 198.51.100.*"
+# sendastext="yes">
+#
+# If you use the websocket module you MUST specify one or more origins
+# which are allowed to connect to the server. You should set this as
+# strict as possible to prevent malicious webpages from connecting to
+# your server.
+# <wsorigin allow="https://*.example.com">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# X-line database: Stores all *-lines (G/Z/K/R/any added by other modules)
# in a file which is re-loaded on restart. This is useful
# for two reasons: it keeps bans so users may not evade them, and on
# bigger networks, server connections will take less time as there will
# be a lot less bans to apply - as most of them will already be there.
-#<module name="m_xline_db.so">
+#<module name="xline_db">
-# Specify the filename for the xline database here.
-#<xlinedb filename="data/xline.db">
+# Specify the filename for the xline database and how often to check whether
+# the database needs to be saved here.
+#<xlinedb filename="xline.db" saveperiod="5s">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ____ _ _____ _ _ ____ _ _ _ #
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
-# To link servers to InspIRCd, you MUST load the m_spanningtree #
-# module. If you don't do this, server links will NOT work at all. #
+# To link servers to InspIRCd, you MUST load the spanningtree module. #
+# If you don't do this, server links will NOT work at all. #
# This is by design, to allow for the implementation of other linking #
# protocols in modules in the future. #
# tree protocol (see the READ THIS BIT section above).
# You will almost always want to load this.
#
-#<module name="m_spanningtree.so">
+#<module name="spanningtree">
projects / user / henk / code / inspircd.git / blobdiff