# If a non-oper attempts to use the alias, it will #
# appear to not exist. #
# #
-#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-#<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-#<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
-#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-#<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-#<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#
# An example of using the format value to create an alias with two
# different behaviours depending on the format of the parameters.
#
# This alias fixes a glitch in xchat 2.6.x and above and the way it
# assumes IDENTIFY must be prefixed by a colon (:) character. It should
-# be placed ABOVE the default NICKSERV alias (the first example) listed
-# above.
+# be placed ABOVE the default NICKSERV alias.
#
#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
# requires="NickServ" uline="yes">
# If you have the blockamsg module loaded, you can configure it with #
# the <blockamsg> tag: #
# #
-# delay - How many seconds between two messages to force #
-# them to be recognised as unrelated. #
+# delay - How much time between two messages to force them #
+# to be recognised as unrelated. #
# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
# or 'killopers'. Define how to take action when #
# a user uses /amsg or /ame. #
# tracknick - Preserve /accept entries when a user changes nick? #
# If no (the default), the user is removed from #
# everyone's accept list if he changes nickname. #
-# cooldown - Amount of time (in seconds) that must pass since #
-# the last notification sent to a user before he can #
-# be sent another. Default is 60 (1 minute). #
+# cooldown - Amount of time that must pass since the last #
+# notification sent to a user before he can be sent #
+# another. Default is 1 minute. #
#<callerid maxaccepts="16"
# operoverride="no"
# tracknick="no"
-# cooldown="60">
+# cooldown="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CAP module: Provides the CAP negotiation mechanism required by the
#<include file="examples/censor.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-# Adds snomask +w for monitoring CGI:IRC connections.
+# CGI:IRC module: Enables forwarding the real IP address of a user from
+# a gateway to the IRC server.
#<module name="cgiirc">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
-# Optional - If you specify to use cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: http://wiki.inspircd.org/Modules/cgiirc
-#
-# Set to yes if you want to notice opers when CGI:IRC clients connect.
+# If you use the cgiirc module then you must specify the gateways which
+# are authorised to forward IP/host information to your server. There
+# are currently two ways to do this:
+#
+# The webirc method is the recommended way to allow gateways to forward
+# IP/host information. When using this method the gateway sends a WEBIRC
+# message to the server on connection. For more details please read the
+# IRCv3 WebIRC specification at http://ircv3.net/specs/extensions/webirc.html.
+#
+# When using this method you must specify a wildcard mask or CIDR range
+# to allow gateway connections from and at least one of either a SSL
+# client certificate fingerprint for the gateway or a password to be
+# sent in the WEBIRC command.
+#
+# <cgihost type="webirc"
+# fingerprint="bd90547b59c1942b85f382bc059318f4c6ca54c5"
+# mask="192.0.2.0/24">
+# <cgihost type="webirc"
+# password="$2a$10$WEUpX9GweJiEF1WxBDSkeODBstIBMlVPweQTG9cKM8/Vd58BeM5cW"
+# hash="bcrypt"
+# mask="*.webirc.gateway.example.com">
+#
+# Alternatively if your gateway does not support sending the WEBIRC
+# message then you can configure InspIRCd to look for the client IP
+# address in the ident sent by the user. This is not recommended as it
+# only works with IPv4 connections.
+#
+# When using this method you must specify a wildcard mask or CIDR range to
+# allow gateway connections from.
+#
+# <cgihost type="ident" mask="198.51.100.0/24">
+# <cgihost type="ident" mask="*.ident.gateway.example.com">
+#
+# By default gateway connections are logged to the +w snomask. If you
+# do not want this to happen then you can uncomment this to disable it.
# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="pass" mask="www.example.com"> # Get IP from PASS
-# <cgihost type="ident" mask="otherbox.example.com"> # Get IP from ident
-# <cgihost type="passfirst" mask="www.example.com"> # See the docs
-# New style:
-# <cgihost type="webirc" password="foobar"
-# mask="somebox.example.com"> # Get IP from WEBIRC
-#
+
# IMPORTANT NOTE:
# ---------------
#
-# When you connect CGI:IRC clients, there are two connect classes which
+# When you connect gateway clients, there are two connect classes which
# apply to these clients. When the client initially connects, the connect
-# class which matches the CGI:IRC site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
+# class which matches the gateway site's host is checked. Therefore you
+# must raise the maximum local/global clients for this IP as high as you
+# want to allow gateway clients. After the client has connected and is
+# determined to be a gateway client, the class which matches the client's
# real IP is then checked. You may set this class to a lower value, so that
# the real IP of the client can still be restricted to, for example, 3
# sessions maximum.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channelban: Implements extended ban j:, which stops anyone already
# in a channel matching a ban like +b j:#channel*mask from joining.
+# Note that by default wildcard characters * and ? are allowed in
+# channel names. To disallow them, load m_channames and add characters
+# 42 and 63 to denyrange (see above).
#<module name="channelban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# This module is oper-only.
# To use, CHGNAME must be in one of your oper class blocks.
#<module name="chgname">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connection class ban module: Adds support for extban 'n' which
+# matches against the class name of the user's connection.
+# This module assumes that connection classes are named in a uniform
+# way on all servers of the network.
+#<module name="classban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clear chan module: Allows opers to masskick, masskill or mass-G/ZLine
# #
# There are two methods of cloaking: #
# #
-# half Cloak only the "unique" portion of a host; show #
-# the last 2 parts of the domain, /16 subnet of IPv4 #
-# or /48 subnet of the IPv6 address. #
+# half Cloak only the "unique" portion of a host; by #
+# default show the last 2 parts of the domain, #
+# /16 subnet of IPv4 or /48 subnet of the IPv6 #
+# address. #
+# To change the number of shown parts, modify the #
+# domainparts option. #
# #
# full Cloak the users completely, using three slices for #
# common CIDR bans (IPv4: /16, /24; IPv6: /48, /64). #
#
#<cloak mode="half"
# key="secret"
+# domainparts="3"
# prefix="net-">
#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<module name="connflood">
#
#-#-#-#-#-#-#-#-#-#-#- CONNTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-# seconds, maxconns - Amount of connections per <seconds>.
+# period, maxconns - Amount of connections per <period>.
#
# timeout - Time to wait after the throttle was activated
# before deactivating it. Be aware that the time
#
#<title name="foo" password="bar" title="Official Chat Helper">
#<title name="bar" password="foo" host="ident@test.org" title="Official Chat Helper" vhost="helper.test.org">
-#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper">
+#<title name="foo" password="$2a$10$UYZ4OcO8NNTCCGyCdY9SK.2GHiqGgxZfHFPOPmWuxEVWVQTtoDC7C" hash="bcrypt" title="Official Chat Helper">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command.
# length - Default duration of entries in DCCALLOW list.
# action - Default action to take if no action is
# specified, can be 'block' or 'allow'.
+# maxentries - Max number of nicks to allow on a DCCALLOW list.
#
# File configuration:
# pattern - The glob pattern to match against.
# that matches this pattern, can be 'block' or
# 'allow'.
#
-#<dccallow blockchat="yes" length="5m" action="block">
+#<dccallow blockchat="yes" length="5m" action="block" maxentries="20">
#<banfile pattern="*.exe" action="block">
#<banfile pattern="*.txt" action="allow">
# httpd_* modules to provide pages to display.
#
# You can adjust the timeout for HTTP connections below. All HTTP
-# connections will be closed after (roughly) this many seconds.
+# connections will be closed after (roughly) this time period.
#<httpd timeout="20">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# extension will get the chghost message and won't see host cycling.
#<module name="ircv3_chghost">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 echo-message module: Provides the echo-message IRCv3.2
+# extension which allows capable clients to get an acknowledgement when
+# their messages are delivered and learn what modifications, if any,
+# were applied to them.
+#<module name="ircv3_echomessage">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 invite-notify module: Provides the invite-notify IRCv3.2
+# extension which notifies supporting clients when a user invites
+# another user into a channel. This respects <options:announceinvites>.
+#<module name="ircv3_invitenotify">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Join flood module: Adds support for join flood protection +j X:Y.
-# Closes the channel for 60 seconds if X users join in Y seconds.
+# Closes the channel for N seconds if X users join in Y seconds.
#<module name="joinflood">
+#
+# The number of seconds to close the channel for:
+#<joinflood duration="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Jump server module: Adds support for the RPL_REDIR numeric.
# allowpattern="Guest* Bot*" #
# killreason="Access denied" #
# verbose="yes" #
-# host="$uid.$ou.inspircd.org"> #
+# host="$uid.$ou.inspircd.org" #
+# useusername="no"> #
# #
# <ldapwhitelist cidr="10.42.0.0/16"> #
# #
# regardless of if they have an account, for example guest and bot #
# users. #
# #
+# The useusername setting chooses whether the user's username or #
+# nickname is used when locating a user account, if a username isn't #
+# provided in PASS. #
+# #
# Killreason indicates the QUIT reason to give to users if they fail #
# to authenticate. #
# #
#<module name="modenotice">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# MsSQL module: Allows other SQL modules to access MS SQL Server
-# through a unified API.
-# This module is in extras. Re-run configure with:
-# ./configure --enable-extras=m_mssql.cpp
-# and run make install, then uncomment this module to enable it.
-#<module name="mssql">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# mssql is more complex than described here, see the wiki for more #
-# info http://wiki.inspircd.org/Modules/mssql #
+# Monitor module: Adds support for MONITOR which is used by clients to
+# maintain notify lists.
+#<module name="monitor">
#
-#<database module="mssql" name="db" user="user" pass="pass" host="localhost" id="db1">
+# Set the maximum number of entries on a user's monitor list below.
+#<monitor maxentries="30">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MySQL module: Allows other SQL modules to access MySQL databases
# 2) Allows using custom (national) casemapping over the network.
#<module name="nationalchars">
#
-# file - filename of existing file in "locales" directory
-# casemapping - custom value for 005 numeric (if you want it to be
-# different from the filename). Set this to the name of
-# the locale if you are specifying an absolute path.
+# file - Location of the file which contains casemapping rules. If this
+# is a relative path then it is relative to "<PWD>/../locales"
+# on UNIX and "<PWD>/locales" on Windows.
+# casemapping - The name of the casemapping sent to clients in the 005
+# numeric. If this is not set then it defaults to the name
+# of the casemapping file unless the file name contains a
+# space in which case you will have to specify it manually.
#<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nickchange flood protection module: Provides channel mode +F X:Y
# which allows up to X nick changes in Y seconds.
#<module name="nickflood">
+#
+# The number of seconds to prevent nick changes for:
+#<nickflood duration="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Password hash module: Allows hashed passwords to be used.
-# To be useful, a hashing module like sha256 also needs to be loaded.
+# To be useful, a hashing module like bcrypt also needs to be loaded.
#<module name="password_hash">
#
#-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
#
# <oper name="Brain"
# host="ident@dialup15.isp.test.com"
-# hash="sha256"
-# password="01ba4719c80b6fe911b091a7c05124b64eeece964e09c058ef8f9805daca546b"
+# hash="bcrypt"
+# password="$2a$10$Mss9AtHHslZTLBrXqM0FB.JBwD.UTSu8A48SfrY9exrpxbsRiRTbO"
# type="NetAdmin">
#
-# Starting from 2.0, you can use a more secure salted hash that prevents simply
-# looking up the hash's value in a rainbow table built for the hash.
+# If you are using a hash algorithm which does not perform salting you can use
+# HMAC to salt your passwords in order to prevent them from being looked up in
+# a rainbow table.
+#
# hash="hmac-sha256" password="lkS1Nbtp$CyLd/WPQXizsbxFUTqFRoMvaC+zhOULEeZaQkUJj+Gg"
#
# Generate hashes using the /MKPASSWD command on the server.
#<include file="permchannels.conf">
#
# You may also create channels on startup by using the <permchannels> block.
-# Don't forget to set them +P in the modes, or they won't stay permanent.
#<permchannels channel="#opers" modes="isP" topic="Opers only.">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# maxbacklog - Maximum size that can be specified for backlog. 0 disables multiline matching.
# maxdistance - Max percentage of difference between two lines we'll allow to match. Set to 0 to disable edit-distance matching.
# maxlines - Max lines of backlog to match against.
-# maxsecs - Maximum value of seconds a user can set. 0 to allow any.
+# maxtime - Maximum period of time a user can set. 0 to allow any.
# size - Maximum number of characters to check for, can be used to truncate messages
# before they are checked, resulting in less CPU usage. Increasing this beyond 512
# doesn't have any effect, as the maximum length of a message on IRC cannot exceed that.
-#<repeat maxbacklog="20" maxlines="20" maxdistance="50" maxsecs="0" size="512">
+#<repeat maxbacklog="20" maxlines="20" maxdistance="50" maxtime="0" size="512">
#<module name="repeat">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Securelist can be harmful to some IRC search engines such as #
-# netsplit.de and searchirc.com. To prevent securelist blocking these #
-# sites from listing, define exception tags as shown below: #
-#<securehost exception="*@*.searchirc.org">
+# Securelist can be harmful to some IRC search engines. To prevent #
+# securelist blocking these sites from listing, define exception tags #
+# as shown below: #
#<securehost exception="*@*.netsplit.de">
-#<securehost exception="*@echo940.server4you.de">
#<securehost exception="*@*.ircdriven.com">
+#<securehost exception="*@*.ircs.me">
# #
# Define the following variable to change how long a user must wait #
# before issuing a LIST. If not defined, defaults to 60 seconds. #
# #
-#<securelist waittime="60"> #
+#<securelist waittime="1m"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Servprotect module: Provides support for Austhex style +k /
# to a server matching a mask like +b s:server.mask.here from joining.
#<module name="serverban">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SHA1 module: Allows other modules to generate SHA1 hashes.
+# Required by the WebSocket module.
+#<module name="sha1">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Showfile: Provides support for showing a text file to users when #
# they enter a command. #
# You can optionally let the user know that their command was blocked.
#
# You may also let SHUN affect opers (defaults to no).
-#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
+#<shun enabledcommands="ADMIN PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL channel mode module: Adds support for SSL-only channels via
# channel mode +z and the 'z' extban which matches SSL client
# certificate fingerprints.
-# Does not do anything useful without a working SSL module (see below).
+# Does not do anything useful without a working SSL module and the
+# sslinfo module (see below).
#<module name="sslmodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
#<module name="sslinfo">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# mbedTLS SSL module: Adds support for SSL/TLS connections using mbedTLS.
+#<module name="ssl_mbedtls">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
# if enabled. You must answer 'yes' in ./configure when asked or symlink
# http://wiki.inspircd.org/Modules/ssl_openssl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Strip color module: Adds channel mode +S that strips mIRC color
-# codes from all messages sent to the channel.
+# Strip color module: Adds channel mode +S that strips color codes and
+# all control codes except CTCP from all messages sent to the channel.
#<module name="stripcolor">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# databases through a unified API. #
# This module is in extras. Re-run configure with: #
-# ./configure --enable-extras=m_sqlite.cpp
+# ./configure --enable-extras=m_sqlite3.cpp
# and run make install, then uncomment this module to enable it. #
#
#<module name="sqlite3">
# #
# See also: http://wiki.inspircd.org/Modules/sqloper #
# #
-#<sqloper dbid="1" hash="md5">
+#<sqloper dbid="1" hash="bcrypt">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# StartTLS module: Implements STARTTLS, which allows clients #
# To use, SWHOIS must be in one of your oper class blocks.
#<module name="swhois">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test module: Enable this to create a command useful in testing
-# flood control. To avoid accidental use on live networks, the server
-# name must contain ".test" to load the module
-#<module name="testnet">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Timed bans module: Adds timed channel bans with the /TBAN command.
#<module name="timedbans">
# host - Vhost to set. #
#
#<vhost user="some_username" pass="some_password" host="some.host.test.cc">
-#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host.example.com">
+#<vhost user="foo" password="$2a$10$iTuYLT6BRhRlOgzfsW9oPe62etW.oXwSpyKw5rJit64SGZanLXghO" hash="bcrypt" host="some.other.host.example.com">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
# Set the maximum number of entries on a user's watch list below.
#<watch maxentries="32">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# WebSocket module: Adds HTML5 WebSocket support.
+# Specify hook="websocket" in a <bind> tag to make that port accept
+# WebSocket connections. Compatible with SSL/TLS.
+# Requires SHA-1 hash support available in the sha1 module.
+#<module name="websocket">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
# in a file which is re-loaded on restart. This is useful
#<module name="xline_db">
# Specify the filename for the xline database here.
-#<xlinedb filename="data/xline.db">
+#<xlinedb filename="xline.db">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ____ _ _____ _ _ ____ _ _ _ #