# If you have the blockamsg module loaded, you can configure it with #
# the <blockamsg> tag: #
# #
-# delay - How many seconds between two messages to force #
-# them to be recognised as unrelated. #
+# delay - How much time between two messages to force them #
+# to be recognised as unrelated. #
# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
# or 'killopers'. Define how to take action when #
# a user uses /amsg or /ame. #
# tracknick - Preserve /accept entries when a user changes nick? #
# If no (the default), the user is removed from #
# everyone's accept list if he changes nickname. #
-# cooldown - Amount of time (in seconds) that must pass since #
-# the last notification sent to a user before he can #
-# be sent another. Default is 60 (1 minute). #
+# cooldown - Amount of time that must pass since the last #
+# notification sent to a user before he can be sent #
+# another. Default is 1 minute. #
#<callerid maxaccepts="16"
# operoverride="no"
# tracknick="no"
-# cooldown="60">
+# cooldown="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CAP module: Provides the CAP negotiation mechanism required by the
#<include file="examples/censor.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-# Adds snomask +w for monitoring CGI:IRC connections.
+# CGI:IRC module: Enables forwarding the real IP address of a user from
+# a gateway to the IRC server.
#<module name="cgiirc">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
-# Optional - If you specify to use cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: http://wiki.inspircd.org/Modules/cgiirc
-#
-# Set to yes if you want to notice opers when CGI:IRC clients connect.
+# If you use the cgiirc module then you must specify the gateways which
+# are authorised to forward IP/host information to your server. There
+# are currently two ways to do this:
+#
+# The webirc method is the recommended way to allow gateways to forward
+# IP/host information. When using this method the gateway sends a WEBIRC
+# message to the server on connection. For more details please read the
+# IRCv3 WebIRC specification at http://ircv3.net/specs/extensions/webirc.html.
+#
+# When using this method you must specify a wildcard mask or CIDR range
+# to allow gateway connections from and at least one of either a SSL
+# client certificate fingerprint for the gateway or a password to be
+# sent in the WEBIRC command.
+#
+# <cgihost type="webirc"
+# fingerprint="bd90547b59c1942b85f382bc059318f4c6ca54c5"
+# mask="192.0.2.0/24">
+# <cgihost type="webirc"
+# password="$2a$10$WEUpX9GweJiEF1WxBDSkeODBstIBMlVPweQTG9cKM8/Vd58BeM5cW"
+# hash="bcrypt"
+# mask="*.webirc.gateway.example.com">
+#
+# Alternatively if your gateway does not support sending the WEBIRC
+# message then you can configure InspIRCd to look for the client IP
+# address in the ident sent by the user. This is not recommended as it
+# only works with IPv4 connections.
+#
+# When using this method you must specify a wildcard mask or CIDR range to
+# allow gateway connections from.
+#
+# <cgihost type="ident" mask="198.51.100.0/24">
+# <cgihost type="ident" mask="*.ident.gateway.example.com">
+#
+# By default gateway connections are logged to the +w snomask. If you
+# do not want this to happen then you can uncomment this to disable it.
# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="pass" mask="www.example.com"> # Get IP from PASS
-# <cgihost type="ident" mask="otherbox.example.com"> # Get IP from ident
-# <cgihost type="passfirst" mask="www.example.com"> # See the docs
-# New style:
-# <cgihost type="webirc" password="foobar"
-# mask="somebox.example.com"> # Get IP from WEBIRC
-#
+
# IMPORTANT NOTE:
# ---------------
#
-# When you connect CGI:IRC clients, there are two connect classes which
+# When you connect gateway clients, there are two connect classes which
# apply to these clients. When the client initially connects, the connect
-# class which matches the CGI:IRC site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
+# class which matches the gateway site's host is checked. Therefore you
+# must raise the maximum local/global clients for this IP as high as you
+# want to allow gateway clients. After the client has connected and is
+# determined to be a gateway client, the class which matches the client's
# real IP is then checked. You may set this class to a lower value, so that
# the real IP of the client can still be restricted to, for example, 3
# sessions maximum.
# #
# There are two methods of cloaking: #
# #
-# half Cloak only the "unique" portion of a host; show #
-# the last 2 parts of the domain, /16 subnet of IPv4 #
-# or /48 subnet of the IPv6 address. #
+# half Cloak only the "unique" portion of a host; by #
+# default show the last 2 parts of the domain, #
+# /16 subnet of IPv4 or /48 subnet of the IPv6 #
+# address. #
+# To change the number of shown parts, modify the #
+# domainparts option. #
# #
# full Cloak the users completely, using three slices for #
# common CIDR bans (IPv4: /16, /24; IPv6: /48, /64). #
#
#<cloak mode="half"
# key="secret"
+# domainparts="3"
# prefix="net-">
#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<module name="connflood">
#
#-#-#-#-#-#-#-#-#-#-#- CONNTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-# seconds, maxconns - Amount of connections per <seconds>.
+# period, maxconns - Amount of connections per <period>.
#
# timeout - Time to wait after the throttle was activated
# before deactivating it. Be aware that the time
# httpd_* modules to provide pages to display.
#
# You can adjust the timeout for HTTP connections below. All HTTP
-# connections will be closed after (roughly) this many seconds.
+# connections will be closed after (roughly) this time period.
#<httpd timeout="20">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# maxbacklog - Maximum size that can be specified for backlog. 0 disables multiline matching.
# maxdistance - Max percentage of difference between two lines we'll allow to match. Set to 0 to disable edit-distance matching.
# maxlines - Max lines of backlog to match against.
-# maxsecs - Maximum value of seconds a user can set. 0 to allow any.
+# maxtime - Maximum period of time a user can set. 0 to allow any.
# size - Maximum number of characters to check for, can be used to truncate messages
# before they are checked, resulting in less CPU usage. Increasing this beyond 512
# doesn't have any effect, as the maximum length of a message on IRC cannot exceed that.
-#<repeat maxbacklog="20" maxlines="20" maxdistance="50" maxsecs="0" size="512">
+#<repeat maxbacklog="20" maxlines="20" maxdistance="50" maxtime="0" size="512">
#<module name="repeat">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# as shown below: #
#<securehost exception="*@*.netsplit.de">
#<securehost exception="*@*.ircdriven.com">
-#<securehost exception="*@*.irc-source.com">
+#<securehost exception="*@*.ircs.me">
# #
# Define the following variable to change how long a user must wait #
# before issuing a LIST. If not defined, defaults to 60 seconds. #
# #
-#<securelist waittime="60"> #
+#<securelist waittime="1m"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Servprotect module: Provides support for Austhex style +k /
# You can optionally let the user know that their command was blocked.
#
# You may also let SHUN affect opers (defaults to no).
-#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
+#<shun enabledcommands="ADMIN PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL channel mode module: Adds support for SSL-only channels via
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# databases through a unified API. #
# This module is in extras. Re-run configure with: #
-# ./configure --enable-extras=m_sqlite.cpp
+# ./configure --enable-extras=m_sqlite3.cpp
# and run make install, then uncomment this module to enable it. #
#
#<module name="sqlite3">