#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channelban: Implements extended ban j:, which stops anyone already
# in a channel matching a ban like +b j:#channel*mask from joining.
+# Note that by default wildcard characters * and ? are allowed in
+# channel names. To disallow them, load m_channames and add characters
+# 42 and 63 to denyrange (see above).
#<module name="channelban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# This module is oper-only.
# To use, CHGNAME must be in one of your oper class blocks.
#<module name="chgname">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connection class ban module: Adds support for extban 'n' which
+# matches against the class name of the user's connection.
+# This module assumes that connection classes are named in a uniform
+# way on all servers of the network.
+#<module name="classban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clear chan module: Allows opers to masskick, masskill or mass-G/ZLine
#
#<title name="foo" password="bar" title="Official Chat Helper">
#<title name="bar" password="foo" host="ident@test.org" title="Official Chat Helper" vhost="helper.test.org">
-#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper">
+#<title name="foo" password="$2a$10$UYZ4OcO8NNTCCGyCdY9SK.2GHiqGgxZfHFPOPmWuxEVWVQTtoDC7C" hash="bcrypt" title="Official Chat Helper">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command.
# length - Default duration of entries in DCCALLOW list.
# action - Default action to take if no action is
# specified, can be 'block' or 'allow'.
+# maxentries - Max number of nicks to allow on a DCCALLOW list.
#
# File configuration:
# pattern - The glob pattern to match against.
# that matches this pattern, can be 'block' or
# 'allow'.
#
-#<dccallow blockchat="yes" length="5m" action="block">
+#<dccallow blockchat="yes" length="5m" action="block" maxentries="20">
#<banfile pattern="*.exe" action="block">
#<banfile pattern="*.txt" action="allow">
# Set the maximum number of entries on a user's monitor list below.
#<monitor maxentries="30">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# MsSQL module: Allows other SQL modules to access MS SQL Server
-# through a unified API.
-# This module is in extras. Re-run configure with:
-# ./configure --enable-extras=m_mssql.cpp
-# and run make install, then uncomment this module to enable it.
-#<module name="mssql">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# mssql is more complex than described here, see the wiki for more #
-# info http://wiki.inspircd.org/Modules/mssql #
-#
-#<database module="mssql" name="db" user="user" pass="pass" host="localhost" id="db1">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MySQL module: Allows other SQL modules to access MySQL databases
# through a unified API.
# 2) Allows using custom (national) casemapping over the network.
#<module name="nationalchars">
#
-# file - filename of existing file in "locales" directory
-# casemapping - custom value for 005 numeric (if you want it to be
-# different from the filename). Set this to the name of
-# the locale if you are specifying an absolute path.
+# file - Location of the file which contains casemapping rules. If this
+# is a relative path then it is relative to "<PWD>/../locales"
+# on UNIX and "<PWD>/locales" on Windows.
+# casemapping - The name of the casemapping sent to clients in the 005
+# numeric. If this is not set then it defaults to the name
+# of the casemapping file unless the file name contains a
+# space in which case you will have to specify it manually.
#<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Password hash module: Allows hashed passwords to be used.
-# To be useful, a hashing module like sha256 also needs to be loaded.
+# To be useful, a hashing module like bcrypt also needs to be loaded.
#<module name="password_hash">
#
#-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
#
# <oper name="Brain"
# host="ident@dialup15.isp.test.com"
-# hash="sha256"
-# password="01ba4719c80b6fe911b091a7c05124b64eeece964e09c058ef8f9805daca546b"
+# hash="bcrypt"
+# password="$2a$10$Mss9AtHHslZTLBrXqM0FB.JBwD.UTSu8A48SfrY9exrpxbsRiRTbO"
# type="NetAdmin">
#
-# Starting from 2.0, you can use a more secure salted hash that prevents simply
-# looking up the hash's value in a rainbow table built for the hash.
+# If you are using a hash algorithm which does not perform salting you can use
+# HMAC to salt your passwords in order to prevent them from being looked up in
+# a rainbow table.
+#
# hash="hmac-sha256" password="lkS1Nbtp$CyLd/WPQXizsbxFUTqFRoMvaC+zhOULEeZaQkUJj+Gg"
#
# Generate hashes using the /MKPASSWD command on the server.
# to a server matching a mask like +b s:server.mask.here from joining.
#<module name="serverban">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SHA1 module: Allows other modules to generate SHA1 hashes.
+# Required by the WebSocket module.
+#<module name="sha1">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Showfile: Provides support for showing a text file to users when #
# they enter a command. #
#
#<module name="sslinfo">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# mbedTLS SSL module: Adds support for SSL/TLS connections using mbedTLS.
+#<module name="ssl_mbedtls">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
# if enabled. You must answer 'yes' in ./configure when asked or symlink
# #
# See also: http://wiki.inspircd.org/Modules/sqloper #
# #
-#<sqloper dbid="1" hash="md5">
+#<sqloper dbid="1" hash="bcrypt">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# StartTLS module: Implements STARTTLS, which allows clients #
# host - Vhost to set. #
#
#<vhost user="some_username" pass="some_password" host="some.host.test.cc">
-#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host.example.com">
+#<vhost user="foo" password="$2a$10$iTuYLT6BRhRlOgzfsW9oPe62etW.oXwSpyKw5rJit64SGZanLXghO" hash="bcrypt" host="some.other.host.example.com">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
# Set the maximum number of entries on a user's watch list below.
#<watch maxentries="32">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# WebSocket module: Adds HTML5 WebSocket support.
+# Specify hook="websocket" in a <bind> tag to make that port accept
+# WebSocket connections. Compatible with SSL/TLS.
+# Requires SHA-1 hash support available in the sha1 module.
+#<module name="websocket">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
# in a file which is re-loaded on restart. This is useful
projects / user / henk / code / inspircd.git / blobdiff