#<include file="examples/censor.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-# Adds snomask +w for monitoring CGI:IRC connections.
+# CGI:IRC module: Enables forwarding the real IP address of a user from
+# a gateway to the IRC server.
#<module name="cgiirc">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
-# Optional - If you specify to use cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: http://wiki.inspircd.org/Modules/cgiirc
-#
-# Set to yes if you want to notice opers when CGI:IRC clients connect.
+# If you use the cgiirc module then you must specify the gateways which
+# are authorised to forward IP/host information to your server. There
+# are currently two ways to do this:
+#
+# The webirc method is the recommended way to allow gateways to forward
+# IP/host information. When using this method the gateway sends a WEBIRC
+# message to the server on connection. For more details please read the
+# IRCv3 WebIRC specification at http://ircv3.net/specs/extensions/webirc.html.
+#
+# When using this method you must specify a wildcard mask or CIDR range
+# to allow gateway connections from and at least one of either a SSL
+# client certificate fingerprint for the gateway or a password to be
+# sent in the WEBIRC command.
+#
+# <cgihost type="webirc"
+# fingerprint="bd90547b59c1942b85f382bc059318f4c6ca54c5"
+# mask="192.0.2.0/24">
+# <cgihost type="webirc"
+# password="$2a$10$WEUpX9GweJiEF1WxBDSkeODBstIBMlVPweQTG9cKM8/Vd58BeM5cW"
+# hash="bcrypt"
+# mask="*.webirc.gateway.example.com">
+#
+# Alternatively if your gateway does not support sending the WEBIRC
+# message then you can configure InspIRCd to look for the client IP
+# address in the ident sent by the user. This is not recommended as it
+# only works with IPv4 connections.
+#
+# When using this method you must specify a wildcard mask or CIDR range to
+# allow gateway connections from.
+#
+# <cgihost type="ident" mask="198.51.100.0/24">
+# <cgihost type="ident" mask="*.ident.gateway.example.com">
+#
+# By default gateway connections are logged to the +w snomask. If you
+# do not want this to happen then you can uncomment this to disable it.
# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="ident" mask="otherbox.example.com"> # Get IP from ident
-# New style:
-# <cgihost type="webirc" password="foobar"
-# mask="somebox.example.com"> # Get IP from WEBIRC
-#
+
# IMPORTANT NOTE:
# ---------------
#
-# When you connect CGI:IRC clients, there are two connect classes which
+# When you connect gateway clients, there are two connect classes which
# apply to these clients. When the client initially connects, the connect
-# class which matches the CGI:IRC site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
+# class which matches the gateway site's host is checked. Therefore you
+# must raise the maximum local/global clients for this IP as high as you
+# want to allow gateway clients. After the client has connected and is
+# determined to be a gateway client, the class which matches the client's
# real IP is then checked. You may set this class to a lower value, so that
# the real IP of the client can still be restricted to, for example, 3
# sessions maximum.
# quitmsg="Throttled" bootwait="10">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Custom prefixes: Allows for channel prefixes to be added.
+# Custom prefixes: Allows for channel prefixes to be configured.
#<module name="customprefix">
#
# name The name of the mode, must be unique from other modes.
# rank A numeric rank for this prefix, defining what permissions it gives.
# The rank of voice, halfop and op is 10000, 20000, and 30000,
# respectively.
-# ranktoset The numeric rank required to set/unset this mode. Defaults to rank.
+# ranktoset The numeric rank required to set this mode. Defaults to rank.
+# ranktounset The numeric rank required to unset this mode. Defaults to ranktoset.
# depriv Can you remove the mode from yourself? Defaults to yes.
#<customprefix name="founder" letter="q" prefix="~" rank="50000" ranktoset="50000">
#<customprefix name="admin" letter="a" prefix="&" rank="40000" ranktoset="50000">
#<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
-#<customprefix name="halfvoice" letter="V" prefix="-" rank="1" ranktoset="20000">
+#
+# You can also override the configuration of prefix modes added by both the core
+# and other modules by adding a customprefix tag with change="yes" specified.
+# <customprefix name="op" change="yes" rank="30000" ranktoset="30000"">
+# <customprefix name="voice" change="yes" rank="10000" ranktoset="10000" depriv="no">
#
# Do /RELOADMODULE customprefix after changing the settings of this module.
#<goodchan name="#funtimes"> #
# Glob masks are accepted here also. #
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Devoice module: Let users devoice themselves using /DEVOICE #chan.
-#<module name="devoice">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DNS blacklist module: Provides support for looking up IPs on one or #
# more blacklists. #
# as shown below: #
#<securehost exception="*@*.netsplit.de">
#<securehost exception="*@*.ircdriven.com">
-#<securehost exception="*@*.irc-source.com">
+#<securehost exception="*@*.ircs.me">
# #
# Define the following variable to change how long a user must wait #
# before issuing a LIST. If not defined, defaults to 60 seconds. #
# You can optionally let the user know that their command was blocked.
#
# You may also let SHUN affect opers (defaults to no).
-#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
+#<shun enabledcommands="ADMIN PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL channel mode module: Adds support for SSL-only channels via
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# databases through a unified API. #
# This module is in extras. Re-run configure with: #
-# ./configure --enable-extras=m_sqlite.cpp
+# ./configure --enable-extras=m_sqlite3.cpp
# and run make install, then uncomment this module to enable it. #
#
#<module name="sqlite3">
projects / user / henk / code / inspircd.git / blobdiff