# #
# By default, ALL modules are commented out. You must uncomment them #
# or add lines to your config to load modules. Please refer to #
-# http://wiki.inspircd.org/Modules for a list of modules and #
+# https://wiki.inspircd.org/3.0/Modules for a list of modules and #
# each modules link for any additional conf tags they require. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# this module being loaded to function.
#
#<module name="md5">
-#
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SHA256 module: Allows other modules to generate SHA256 hashes,
# usually for cryptographic uses and security.
# be enhanced (for example the addition of HMAC authentication).
#
#<module name="sha256">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# RIPEMD160 module: Allows other modules to generate RIPEMD160 hashes,
-# usually for cryptographic uses and security.
-#
-# IMPORTANT:
-# Other modules may rely on this module being loaded to function.
-#<module name="ripemd160">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Abbreviation module: Provides the ability to abbreviate commands a-la
# To use, ALLTIME must be in one of your oper class blocks.
#<module name="alltime">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Anticaps module: Adds channel mode +B which allows you to punish
+# users that send overly capitalised messages to channels. Unlike the
+# blockcaps module this module is more flexible as it has more options
+# for punishment and allows channels to configure their own punishment
+# policies.
+#<module name="anticaps">
+#
+# You may also configure the characters which anticaps considers to be
+# lower case and upper case. Any characters not listed here are assumed
+# to be punctuation and will be ignored when counting:
+# <anticaps lowercase="abcdefghijklmnopqrstuvwxyz"
+# uppercase="ABCDEFGHIJKLMNOPQRSTUVWXYZ">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auditorium module: Adds channel mode +u which makes everyone else
# except you in the channel invisible, used for large meetings etc.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block CAPS module: Adds channel mode +B, blocks all-CAPS messages.
+#
+# NOTE: This module is deprecated and will be removed in a future version
+# of InspIRCd. You should use the anticaps module shown above instead.
#<module name="blockcaps">
#
#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# percent - What percentage of the text must be caps before #
-# text will be blocked. #
+# percent - The percentage of a message which must be upper #
+# case before it will be blocked. #
+# #
+# minlen - The minimum length a message must be before it #
+# will be blocked. #
# #
-# minlen - The minimum length a line must be for the block #
-# percent to have any effect. #
+# lowercase - The characters which will be considered lower #
+# case. #
# #
-# capsmap - A list of chars to be considered CAPS. Can be used #
-# to add CAPS characters for your language. Also you #
-# can add things like ! and space to further lock #
-# down on caps usage. #
+# uppercase - The characters which will be considered upper #
+# case. #
+#
#<blockcaps percent="50"
# minlen="5"
-# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
+# lowercase="abcdefghijklmnopqrstuvwxyz"
+# uppercase="ABCDEFGHIJKLMNOPQRSTUVWXYZ">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block color module: Blocking color-coded messages with chan mode +c.
#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# maxaccepts - Maximum number of entries a user can add to his #
# /ACCEPT list. Default is 16 entries. #
-# operoverride - Can opers (note: ALL opers) override callerid? #
-# Default is no. #
# tracknick - Preserve /accept entries when a user changes nick? #
# If no (the default), the user is removed from #
# everyone's accept list if he changes nickname. #
# notification sent to a user before he can be sent #
# another. Default is 1 minute. #
#<callerid maxaccepts="16"
-# operoverride="no"
# tracknick="no"
# cooldown="1m">
# #
# Optional - If you specify to use the censor module, then you must #
# specify some censor tags. See also: #
-# http://wiki.inspircd.org/Modules/censor #
+# https://wiki.inspircd.org/Modules/3.0/censor #
#
#<include file="examples/censor.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-# Adds snomask +w for monitoring CGI:IRC connections.
+# CGI:IRC module: Enables forwarding the real IP address of a user from
+# a gateway to the IRC server.
#<module name="cgiirc">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
-# Optional - If you specify to use cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: http://wiki.inspircd.org/Modules/cgiirc
-#
-# Set to yes if you want to notice opers when CGI:IRC clients connect.
+# If you use the cgiirc module then you must specify the gateways which
+# are authorised to forward IP/host information to your server. There
+# are currently two ways to do this:
+#
+# The webirc method is the recommended way to allow gateways to forward
+# IP/host information. When using this method the gateway sends a WEBIRC
+# message to the server on connection. For more details please read the
+# IRCv3 WebIRC specification at http://ircv3.net/specs/extensions/webirc.html.
+#
+# When using this method you must specify a wildcard mask or CIDR range
+# to allow gateway connections from and at least one of either a SSL
+# client certificate fingerprint for the gateway or a password to be
+# sent in the WEBIRC command.
+#
+# <cgihost type="webirc"
+# fingerprint="bd90547b59c1942b85f382bc059318f4c6ca54c5"
+# mask="192.0.2.0/24">
+# <cgihost type="webirc"
+# password="$2a$10$WEUpX9GweJiEF1WxBDSkeODBstIBMlVPweQTG9cKM8/Vd58BeM5cW"
+# hash="bcrypt"
+# mask="*.webirc.gateway.example.com">
+#
+# Alternatively if your gateway does not support sending the WEBIRC
+# message then you can configure InspIRCd to look for the client IP
+# address in the ident sent by the user. This is not recommended as it
+# only works with IPv4 connections.
+#
+# When using this method you must specify a wildcard mask or CIDR range to allow
+# gateway connections from. You can also optionally configure the static value
+# that replaces the IP in the ident to avoid leaking the real IP address of
+# gateway clients (defaults to "gateway" if not set).
+#
+# <cgihost type="ident"
+# mask="198.51.100.0/24"
+# newident="wibble">
+# <cgihost type="ident"
+# mask="*.ident.gateway.example.com"
+# newident="wobble">
+#
+# By default gateway connections are logged to the +w snomask. If you
+# do not want this to happen then you can uncomment this to disable it.
# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="ident" mask="otherbox.example.com"> # Get IP from ident
-# New style:
-# <cgihost type="webirc" password="foobar"
-# mask="somebox.example.com"> # Get IP from WEBIRC
-#
+
# IMPORTANT NOTE:
# ---------------
#
-# When you connect CGI:IRC clients, there are two connect classes which
+# When you connect gateway clients, there are two connect classes which
# apply to these clients. When the client initially connects, the connect
-# class which matches the CGI:IRC site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
+# class which matches the gateway site's host is checked. Therefore you
+# must raise the maximum local/global clients for this IP as high as you
+# want to allow gateway clients. After the client has connected and is
+# determined to be a gateway client, the class which matches the client's
# real IP is then checked. You may set this class to a lower value, so that
# the real IP of the client can still be restricted to, for example, 3
# sessions maximum.
#
# If hidemask is set to yes, the user will not be shown the mask when
# his/her message is blocked.
-#<chanfilter hidemask="yes">
+#
+# If maxlen is set then it defines the maximum length of a filter entry.
+#
+# If notifyuser is set to no, the user will not be notified when
+# his/her message is blocked.
+#<chanfilter hidemask="yes" maxlen="50" notifyuser="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel history module: Displays the last 'X' lines of chat to a user
# If notice is set to yes, joining users will get a NOTICE before playback
# telling them about the following lines being the pre-join history.
# If bots is set to yes, it will also send to users marked with +B
-#<chanhistory maxlines="20" notice="yes" bots="yes">
+#<chanhistory maxlines="50" notice="yes" bots="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel logging module: Used to send snotice output to channels, to
# that looks like the name of another channel on the network.
#<module name="channames">
-<channames
+#<channames
# denyrange: characters or range of characters to deny in channel
# names.
- denyrange="2,3"
+ #denyrange="2,3"
# allowrange: characters or range of characters to specifically allow
# in channel names.
- allowrange="">
+ #allowrange="">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channelban: Implements extended ban j:, which stops anyone already
# quitmsg="Throttled" bootwait="10">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Custom prefixes: Allows for channel prefixes to be added.
+# Custom prefixes: Allows for channel prefixes to be configured.
#<module name="customprefix">
#
# name The name of the mode, must be unique from other modes.
# rank A numeric rank for this prefix, defining what permissions it gives.
# The rank of voice, halfop and op is 10000, 20000, and 30000,
# respectively.
-# ranktoset The numeric rank required to set/unset this mode. Defaults to rank.
+# ranktoset The numeric rank required to set this mode. Defaults to rank.
+# ranktounset The numeric rank required to unset this mode. Defaults to ranktoset.
# depriv Can you remove the mode from yourself? Defaults to yes.
#<customprefix name="founder" letter="q" prefix="~" rank="50000" ranktoset="50000">
#<customprefix name="admin" letter="a" prefix="&" rank="40000" ranktoset="50000">
#<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
-#<customprefix name="halfvoice" letter="V" prefix="-" rank="1" ranktoset="20000">
+#
+# You can also override the configuration of prefix modes added by both the core
+# and other modules by adding a customprefix tag with change="yes" specified.
+# <customprefix name="op" change="yes" rank="30000" ranktoset="30000">
+# <customprefix name="voice" change="yes" rank="10000" ranktoset="10000" depriv="no">
#
# Do /RELOADMODULE customprefix after changing the settings of this module.
#<goodchan name="#funtimes"> #
# Glob masks are accepted here also. #
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Devoice module: Let users devoice themselves using /DEVOICE #chan.
-#<module name="devoice">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DNS blacklist module: Provides support for looking up IPs on one or #
# more blacklists. #
#<module name="dnsbl"> #
# #
# For configuration options please see the wiki page for dnsbl at #
-# http://wiki.inspircd.org/Modules/dnsbl #
+# https://wiki.inspircd.org/Modules/3.0/dnsbl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Exempt channel operators module: Provides support for allowing #
-# channel operators to be exempt from some channel modes. Supported #
-# modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, #
-# filter, regmoderated, nonick, nonotice, and stripcolor. #
+# users of a specified channel status to be exempt from some channel #
+# restriction modes. Supported restrictions are #
+# blockcaps, blockcolor, censor, filter, flood, nickflood, noctcp, #
+# nonick, nonotice, regmoderated, stripcolor, and topiclock. #
+# See <options:exemptchanops> in inspircd.conf.example for a more #
+# detailed list of the restriction modes that can be exempted. #
+# These are settable using /mode #chan +X <restriction>:<status> #
#<module name="exemptchanops"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# stdlib - stdlib regexps, provided via regex_stdlib, see comment #
# at the <module> tag for info on availability. #
# #
-#<filteropts engine="glob"> #
+# If notifyuser is set to no, the user will not be notified when #
+# his/her message is blocked. #
+#<filteropts engine="glob" notifyuser="yes">
+# #
+# Your choice of regex engine must match on all servers network-wide. #
# #
-# Your choice of regex engine must match on all servers network-wide.
-#
# To learn more about the configuration of this module, read #
# examples/filter.conf.example, which covers the various types of #
# filters and shows how to add exemptions. #
-#
+# #
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the filter module, then #
#<module name="flashpolicyd"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Gecos ban: Implements extended ban 'r', which stops anyone matching
-# a mask like +b r:*realname?here* from joining a channel.
+# Real name ban: Implements two extended bans: #
+# 'a', which matches a n!u@h+realname mask like +b a:*!*@host+*real* #
+# 'r', which matches a realname mask like +b r:*realname?here* #
#<module name="gecosban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
# <connect deny="*" geoip="TR,RU">
#
+# If enabled you can also ban people from channnels by country code
+# using the G: extban (e.g. /mode #channel +b G:US).
+# <geoip extban="yes">
+#
# The country code must be in capitals and should be an ISO country
# code such as TR, GB, or US. Unknown IPs (localhost, LAN IPs, etc)
# will be assigned the country code "UNK". Since connect classes are
# must be in one of your oper class blocks.
#<module name="globalload">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HAProxy module: Adds support for the HAProxy PROXY v2 protocol. To
+# use this module specify hook="haproxy" in the <bind> tag that HAProxy
+# has been configured to connect to.
+#<module name="haproxy">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HELPOP module: Provides the /HELPOP command
#<module name="helpop">
# If you specify to use the helpop module, then specify below the #
# path to the helpop.conf file. #
# #
-#<include file="examples/inspircd.helpop-full.example">
+#<include file="examples/helpop-full.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide chans module: Allows users to hide their channels list from non-
# Only show invite exceptions (+I) to channel members:
#<hidelist mode="invex" rank="0">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Hide mode module: Allows for hiding mode changes from users who do not
+# have sufficient channel privileges.
+#<module name="hidemode">
+#
+# Hide bans (+b) from people who are not voiced:
+#<hidemode mode="ban" rank="10000">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide oper module: Allows opers to hide their oper status from non-
# opers by setting user mode +H on themselves.
#
#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
-# See http://wiki.inspircd.org/Modules/hostchange for help. #
+# See https://wiki.inspircd.org/Modules/3.0/hostchange for help. #
# #
-#<host suffix="invalid.org" separator="." prefix="">
-#<hostchange mask="*@42.theanswer.example.org" action="addnick">
-#<hostchange mask="*root@*" action="suffix">
+#<hostchange mask="*@42.theanswer.example.org" action="addaccount" suffix=".users.example.com">
+#<hostchange mask="*root@*" action="addnick" prefix="example/users/">
#<hostchange mask="a@example.com" action="set" value="foo.bar.baz">
-#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
+#<hostchange mask="*@localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
# hostcycle: If loaded, when a user gets a host or ident set, it will
# cycle them in all their channels. If not loaded it will simply change
# If you choose to use the httpd module, then you will need to add
# a <bind> tag with type "httpd", and load at least one of the other
# httpd_* modules to provide pages to display.
+# <bind address="127.0.0.1" port="8067" type="httpd">
+# <bind address="127.0.0.1" port="8097" type="httpd" ssl="gnutls">
#
# You can adjust the timeout for HTTP connections below. All HTTP
# connections will be closed after (roughly) this time period.
# <httpdacl path="/*" types="blacklist" blacklist="*">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HTTP config module: Allows the configuration of the server to be
-# viewed over HTTP. Requires httpd to be loaded for it to function.
+# HTTP config module: Allows the server configuration to be viewed over
+# HTTP via the /config path. Requires the httpd module to be loaded for
+# it to function.
+#
+# IMPORTANT: This module exposes extremely sensitive information about
+# your server and users so you *MUST* protect it using a local-only
+# <bind> tag and/or the httpd_acl module. See above for details.
#<module name="httpd_config">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HTTP stats module: Provides basic stats pages over HTTP.
-# Requires httpd to be loaded for it to function.
+# HTTP stats module: Provides server statistics over HTTP via the /stats
+# path. Requires the httpd module to be loaded for it to function.
+#
+# IMPORTANT: This module exposes extremely sensitive information about
+# your server and users so you *MUST* protect it using a local-only
+# <bind> tag and/or the httpd_acl module. See above for details.
#<module name="httpd_stats">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<inviteexception bypasskey="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# IRCv3 module: Provides the following IRCv3.1 extensions:
+# IRCv3 module: Provides the following IRCv3 extensions:
# extended-join, away-notify and account-notify. These are optional
# enhancements to the client-to-server protocol. An extension is only
# active for a client when the client specifically requests it, so this
#
# Further information on these extensions can be found at the IRCv3
# working group website:
-# http://ircv3.org/extensions/
+# http://ircv3.net/irc/
#
#<module name="ircv3">
# The following block can be used to control which extensions are
#<ircv3 accountnotify="on" awaynotify="on" extendedjoin="on">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# IRCv3 cap-notify module: Provides the cap-notify IRCv3.2 extension.
-# Required for IRCv3.2 conformance.
+# IRCv3 cap-notify module: Provides the cap-notify IRCv3 extension.
+# Required for IRCv3 conformance.
#<module name="ircv3_capnotify">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# IRCv3 chghost module: Provides the chghost IRCv3.2 extension which
+# IRCv3 account-tag module. Adds the 'account' tag which contains the
+# services account name of the message sender.
+#<module name="ircv3_accounttag">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 batch module: Provides the batch IRCv3 extension which allows
+# the server to inform a client that a group of messages are related to
+# each other.
+#<module name="ircv3_batch">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 cap-notify module: Provides the cap-notify IRCv3 extension.
+# Required for IRCv3 conformance.
+#<module name="ircv3_capnotify">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 chghost module: Provides the chghost IRCv3 extension which
# allows capable clients to learn when the host/ident of another user
# changes without cycling the user. This module is compatible with the
# hostcycle module. If both are loaded, clients supporting the chghost
#<module name="ircv3_chghost">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# IRCv3 echo-message module: Provides the echo-message IRCv3.2
+# IRCv3 echo-message module: Provides the echo-message IRCv3
# extension which allows capable clients to get an acknowledgement when
# their messages are delivered and learn what modifications, if any,
# were applied to them.
#<module name="ircv3_echomessage">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# IRCv3 invite-notify module: Provides the invite-notify IRCv3.2
+# IRCv3 invite-notify module: Provides the invite-notify IRCv3
# extension which notifies supporting clients when a user invites
# another user into a channel. This respects <options:announceinvites>.
#<module name="ircv3_invitenotify">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 server-time module. Adds the 'time' tag which adds a timestamp
+# to all messages received from the server.
+#<module name="ircv3_servertime">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 Strict Transport Security module: Provides the sts IRCv3
+# extension which allows clients connecting insecurely to upgrade their
+# connections to TLS.
+#<module name="ircv3_sts">
+#
+# If using the ircv3_sts module you MUST define a STS policy to send
+# to clients using the <sts> tag. This tag takes the following
+# attributes:
+#
+# host - A glob match for the SNI hostname to apply this policy to.
+# duration - The amount of time that the policy lasts for. Defaults to
+# approximately two months by default.
+# port - The port on which TLS connections to the server are being
+# accepted. You MUST have a CA-verified certificate on this
+# port. Self signed certificates are not acceptable.
+# preload - Whether client developers can include your certificate in
+# preload lists.
+#
+# <sts host="*.example.com" duration="60d" port="6697" preload="yes">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Join flood module: Adds support for join flood protection +j X:Y.
# Closes the channel for N seconds if X users join in Y seconds.
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# mysql is more complex than described here, see the wiki for more #
-# info: http://wiki.inspircd.org/Modules/mysql #
+# info: https://wiki.inspircd.org/Modules/3.0/mysql #
#
#<database module="mysql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database2">
#<module name="nicklock">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No CTCP module: Adds the channel mode +C to block CTCPs and extban
-# 'C' to block CTCPs sent by specific users.
+# No CTCP module: Adds the channel mode +C and user mode +T to block
+# CTCPs and extban 'C' to block CTCPs sent by specific users.
#<module name="noctcp">
+#
+# The +T user mode is not enabled by default to enable link compatibility
+# with 2.0 servers. You can enable it by uncommenting this:
+#<noctcp enableumode="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No kicks module: Adds the +Q channel mode and the Q: extban to deny
# onoper - If on, the message is sent on /OPER, otherwise it's #
# only sent when /OPERMOTD is used. #
# #
-# processcolors - Allow color codes to be processed in the opermotd. #
-# Read the comment above <connect:allowmotdcolors> in #
-# inspircd.conf.example for details. #
-# #
-#<opermotd file="examples/opermotd.txt.example" onoper="yes" processcolors="false">
+#<opermotd file="examples/opermotd.txt.example" onoper="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override.
#
#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# override is too complex it describe here, see the wiki: #
-# http://wiki.inspircd.org/Modules/override #
+# Much of override's configuration relates to your oper blocks. #
+# For more information on how to allow opers to override, see: #
+# https://wiki.inspircd.org/Modules/3.0/override #
+# #
+# noisy - If enabled, all oper overrides will be announced #
+# via channel notice. #
+# #
+# requirekey - If enabled, overriding on join requires a channel #
+# key of "override" to be specified #
+# #
+# enableumode - If enabled, usermode +O is required for override. #
+# #
+#<override noisy="yes" requirekey="no" enableumode="true">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper levels module: Gives each oper a level and prevents actions
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# pgsql is more complex than described here, see the wiki for #
-# more: http://wiki.inspircd.org/Modules/pgsql #
+# pgsql is more complex than described here, see the wiki for #
+# more: https://wiki.inspircd.org/Modules/3.0/pgsql #
#
#<database module="pgsql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database" ssl="no">
# Muteban: Implements extended ban 'm', which stops anyone matching
# a mask like +b m:nick!user@host from speaking on channel.
#<module name="muteban">
+#
+# If notifyuser is set to no, the user will not be notified when
+# his/her message is blocked.
+#<muteban notifyuser="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Random quote module: Provides a random quote on connect.
#<randquote file="quotes.txt">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Redirect module: Adds channel redirection mode +L. #
-# Optional: <redirect:antiredirect> to add usermode +L to stop forced #
-# redirection and instead print an error. #
-# #
-# Note: You can not update this with a simple rehash, it requires #
-# reloading the module for it to take effect. #
-# This also breaks linking to servers that do not have the option. #
-# This defaults to false for the 2.0 version, it will be enabled in #
-# all the future versions. #
+# Redirect module: Adds channel mode +L which redirects users to #
+# another channel when the channel has reached its user limit and #
+# user mode +L which stops redirection. #
#<module name="redirect">
-#<redirect antiredirect="true">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for glob or wildcard (?/*) matching.
# Layer via AUTHENTICATE. Note: You also need to have cap loaded
# for SASL to work.
#<module name="sasl">
+# Define the following to your services server name to improve security
+# by ensuring the SASL messages are only sent to the services server
+# and not to all connected servers. This prevents a rogue server from
+# capturing SASL messages and disables the SASL cap when services is
+# down.
+#<sasl target="services.mynetwork.com">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Secure list module: Prevent /LIST in the first minute of connection,
# as shown below: #
#<securehost exception="*@*.netsplit.de">
#<securehost exception="*@*.ircdriven.com">
-#<securehost exception="*@*.irc-source.com">
+#<securehost exception="*@*.ircs.me">
# #
# Define the following variable to change how long a user must wait #
# before issuing a LIST. If not defined, defaults to 60 seconds. #
# (similar to /MOTD; the default). #
# * notice: Send contents as a series of notices. #
# * msg: Send contents as a series of private messages. #
-# colors - If true, color codes (\c, \b, \u, etc.) will be processed #
-# and sent as ANSI colors. If false (default) the file will #
-# be displayed as-is. #
# #
# When using the method "numeric", the following extra settings are #
# available: #
# #
#<showfile name="RULES"
# file="rules.txt"
-# colors="true"
# introtext="Server rules:"
# endtext="End of server rules.">
# You can optionally let the user know that their command was blocked.
#
# You may also let SHUN affect opers (defaults to no).
-#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
+#<shun enabledcommands="ADMIN PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL channel mode module: Adds support for SSL-only channels via
-# channel mode +z and the 'z' extban which matches SSL client
-# certificate fingerprints.
+# SSL mode module: Adds support for SSL-only channels via the '+z'
+# channel mode, SSL-only private messages via the '+z' user mode and
+# the 'z:' extban which matches SSL client certificate fingerprints.
+#
# Does not do anything useful without a working SSL module and the
# sslinfo module (see below).
#<module name="sslmodes">
+#
+# The +z user mode is not enabled by default to enable link compatibility
+# with 2.0 servers. You can enable it by uncommenting this:
+#<sslmodes enableumode="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL rehash signal module: Allows the SSL modules to be rehashed by
+# sending SIGUSR1 to a running InspIRCd process.
+# This modules is in extras. Re-run configure with:
+# ./configure --enable-extras=m_sslrehashsignal.cpp
+# and run make install, then uncomment this module to enable it.
+#<module name="sslrehashsignal">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# ssl_gnutls is too complex to describe here, see the wiki: #
-# http://wiki.inspircd.org/Modules/ssl_gnutls #
+# https://wiki.inspircd.org/Modules/3.0/ssl_gnutls #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL info module: Allows users to retrieve information about other
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# ssl_openssl is too complex to describe here, see the wiki: #
-# http://wiki.inspircd.org/Modules/ssl_openssl #
+# https://wiki.inspircd.org/Modules/3.0/ssl_openssl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip color module: Adds channel mode +S that strips color codes and
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# databases through a unified API. #
# This module is in extras. Re-run configure with: #
-# ./configure --enable-extras=m_sqlite.cpp
+# ./configure --enable-extras=m_sqlite3.cpp
# and run make install, then uncomment this module to enable it. #
#
#<module name="sqlite3">
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# sqlite is more complex than described here, see the wiki for more #
-# info: http://wiki.inspircd.org/Modules/sqlite3 #
+# info: https://wiki.inspircd.org/Modules/3.0/sqlite3 #
#
#<database module="sqlite" hostname="/full/path/to/database.db" id="anytext">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL authentication module: Allows IRCd connections to be tied into
# a database table (for example a forum).
-# This module is in extras. Re-run configure with:
-# ./configure --enable-extras=m_sqlauth.cpp
-# and run make install, then uncomment this module to enable it.
#
#<module name="sqlauth">
#
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# sqlauth is too complex to describe here, see the wiki: #
-# http://wiki.inspircd.org/Modules/sqlauth #
+# https://wiki.inspircd.org/Modules/3.0/sqlauth #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL oper module: Allows you to store oper credentials in an SQL table
-# This module is in extras. Re-run configure with:
-# ./configure --enable-extras=m_sqloper.cpp
-# and run make install, then uncomment this module to enable it.
+# SQL oper module: Allows you to store oper credentials in an SQL
+# table. You can add additional table columns like you would config
+# tags in opers.conf. Opers in opers.conf will override opers from
+# this module.
#
#<module name="sqloper">
#
#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# dbid - Database ID to use (see SQL modules). #
-# hash - Hashing provider to use for password hashing. #
# #
-# See also: http://wiki.inspircd.org/Modules/sqloper #
+# See also: https://wiki.inspircd.org/Modules/3.0/sqloper #
# #
-#<sqloper dbid="1" hash="bcrypt">
+#<sqloper dbid="1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# StartTLS module: Implements STARTTLS, which allows clients #
# WebSocket connections. Compatible with SSL/TLS.
# Requires SHA-1 hash support available in the sha1 module.
#<module name="websocket">
+#
+# If you use the websocket module you MUST specify one or more origins
+# which are allowed to connect to the server. You should set this as
+# strict as possible to prevent malicious webpages from connecting to
+# your server.
+# <wsorigin allow="https://webchat.example.com/*">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
projects / user / henk / code / inspircd.git / blobdiff