#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
# (http://cgiirc.sourceforge.net).
+# Adds snomask +w for monitoring CGI:IRC connections.
#<module name="m_cgiirc.so">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
# To use, CHGNAME must be in one of your oper class blocks.
#<module name="m_chgname.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Clear chan module: Allows opers to masskick, masskill or mass-G/ZLine
+# all users on a channel using /CLEARCHAN.
+#<module name="m_clearchan.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support.
# Relies on the module m_md5.so being loaded.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Join: Allows you to force users to join one or more channels
-# automatically upon connecting to the server.
+# automatically upon connecting to the server, or join them in case
+# they aren't on any channels after being online for X seconds.
#<module name="m_conn_join.so">
#
#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
-# If you have m_conn_join.so loaded, you can configure it using the
-# follow values:
-#
+# Join users immediately after connection to #one #two and #three.
#<autojoin channel="#one,#two,#three">
+# Join users to #chat after 15 seconds if they aren't on any channels.
+#<autojoin channel="#chat" delay="15">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Usermodes: Set modes on users when they connect
# IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling
# over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
#
-#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
+# A custom ban message may optionally be specified.
+#
+# <connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128"
+# banmessage="Your IP range has been attempting to connect too many times in too short a duration. Wait a while, and you will be able to connect.">
+#
# This allows for 10 connections in an hour with a 10 minute ban if that is exceeded.
#
#<module name="m_connectban.so">
# a <bind> tag with type "httpd", and load at least one of the other
# m_httpd_* modules to provide pages to display.
#
+# You can adjust the timeout for HTTP connections below. All HTTP
+# connections will be closed after (roughly) this many seconds.
+#<httpd timeout="20">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# http ACL module: Provides access control lists for m_httpd dependent
# <ldapauth dbid="ldapdb" #
# baserdn="ou=People,dc=brainbox,dc=cc" #
# attribute="uid" #
-# allowpattern="Guest*" #
+# allowpattern="Guest* Bot*" #
# killreason="Access denied" #
# verbose="yes" #
# host="$uid.$ou.inspircd.org"> #
# The attribute value indicates the attribute which is used to locate #
# a user account by name. On POSIX systems this is usually 'uid'. #
# #
-# The allowpattern value allows you to specify a wildcard mask which #
-# will always be allowed to connect regardless of if they have an #
-# account, for example guest users. #
+# The allowpattern value allows you to specify a space separated list #
+# of wildcard masks which will always be allowed to connect #
+# regardless of if they have an account, for example guest and bot #
+# users. #
# #
# Killreason indicates the QUIT reason to give to users if they fail #
# to authenticate. #
# SAJOIN module: Adds the /SAJOIN command
# This module is oper-only.
# To use, SAJOIN must be in one of your oper class blocks.
+# Opers need the users/sajoin-others priv to be able to /SAJOIN users
+# other than themselves.
#<module name="m_sajoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SASL authentication module: Provides support for IRC Authentication
-# Layer (aka: atheme SASL) via AUTHENTICATE.
+# Layer via AUTHENTICATE. Note: You also need to have m_cap.so loaded
+# for SASL to work.
#<module name="m_sasl.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<module name="m_showwhois.so">
#
# If you wish, you may also let users set this mode. Only opers with the
-# users/auspex priv will see real hosts of people, though. This setting
-# is not reloadable via /rehash, and will require /reloadmodule, as
-# it directly affects the mode object itself.
+# users/auspex priv will see real hosts of people, though.
#<showwhois opersonly="yes"
#
# You may also set whether or not users should receive whois notices, should
# #
#<sqloper dbid="1" hash="md5">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# StartTLS module: Implements STARTTLS, which allows clients #
+# connected to non SSL enabled ports to enable SSL, if a proper SSL #
+# module is loaded (either m_ssl_gnutls or m_ssl_openssl). #
+#<module name="m_starttls.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
# added/removed by Services. #
#<module name="m_svshold.so">
+# SVSHOLD does not generate server notices by default, you can turn
+# notices on by uncommenting the next line.
+#<svshold silent="false">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SWHOIS module: Allows you to add arbitary lines to user WHOIS.