# read from the top of the file to the bottom. #
# #
# usercommand - If this is true, the alias can be run simply as #
-# /aliasname. Defaults to true. #
+# /ALIASNAME. Defaults to true. #
# #
# channelcommand - If this is true, the alias can be used as an #
# in-channel alias or 'fantasy command', prefixed #
# An example of using the format value to create an alias with two
# different behaviours depending on the format of the parameters.
#
-#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
+#<alias text="ID" format="#*" replace="SQUERY ChanServ :IDENTIFY $2 $3"
# requires="ChanServ" uline="yes">
#
-#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
+#<alias text="ID" replace="SQUERY NickServ :IDENTIFY $2"
# requires="NickServ" uline="yes">
#
# This alias fixes a glitch in xchat 2.6.x and above and the way it
# assumes IDENTIFY must be prefixed by a colon (:) character. It should
# be placed ABOVE the default NICKSERV alias.
#
-#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
+#<alias text="NICKSERV" format=":IDENTIFY *" replace="SQUERY NickServ :IDENTIFY $3-"
# requires="NickServ" uline="yes">
#
# You may also add aliases to trigger based on something said in a
# command must be preceded by the fantasy prefix when used.
#
#<alias text="CS" usercommand="no" channelcommand="yes"
-# replace="PRIVMSG ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
+# replace="SQUERY ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
#
# This would be used as "!cs <command> <options>", with the channel
# being automatically inserted after the command in the message to
# The webirc method is the recommended way to allow gateways to forward
# IP/host information. When using this method the gateway sends a WEBIRC
# message to the server on connection. For more details please read the
-# IRCv3 WebIRC specification at http://ircv3.net/specs/extensions/webirc.html.
+# IRCv3 WebIRC specification at: https://ircv3.net/specs/extensions/webirc.html
#
# When using this method you must specify a wildcard mask or CIDR range
# to allow gateway connections from and at least one of either a SSL
# key="changeme"
# prefix="net-">
-#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Close module: Allows an oper to close all unregistered connections.
-# This module is oper-only and provides the /CLOSE command.
-# To use, CLOSE must be in one of your oper class blocks.
-#<module name="close">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clones module: Adds an oper command /CLONES for detecting cloned
# users. Warning: This command may be resource intensive when it is
#<banfile pattern="*.txt" action="allow">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Deaf module: Adds support for the usermode +d - deaf to channel
-# messages and channel notices.
+# Deaf module: Adds support for the usermodes +dD:
+# d - deaf to channel messages and notices.
+# D - deaf to user messages and notices.
+# The +D user mode is not enabled by default to enable link compatibility
+# with 2.0 servers.
#<module name="deaf">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- DEAF CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# bypasschars - Characters that bypass deaf to a regular user.
+# bypasscharsuline - Characters that bypass deaf to a U-lined user (services).
+# Both of these take a list of characters that must match
+# the starting character of a message.
+# If 'bypasscharsuline' is empty, then 'bypasschars' will
+# match for both regular and U-lined users.
+# enableprivdeaf - Whether to enable usermode +D (privdeaf).
+# privdeafuline - Whether U-lined users bypass usermode +D (privdeaf).A
+#
+#<deaf bypasschars="" bypasscharsuline="!" enableprivdeaf="no" privdeafuline="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Delay join module: Adds the channel mode +D which delays all JOIN
# #
# chanmodes - One or more channel modes that can not be added/removed #
# by users. You can exempt server operators from this #
-# with the servers/use-disabled-commands privilege. #
+# with the servers/use-disabled-modes privilege. #
# #
# usermodes - One or more user modes that can not be added/removed by #
# users. You can exempt server operators from this with #
-# the servers/use-disabled-commands privilege. #
+# the servers/use-disabled-modes privilege. #
# #
# fakenonexistent - Whether to pretend that a disabled command/mode #
# does not exist when executed/changed by a user. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DNS blacklist module: Provides support for looking up IPs on one or #
# more blacklists. #
-#<module name="dnsbl"> #
+#<module name="dnsbl">
# #
# For configuration options please see the wiki page for dnsbl at #
# https://wiki.inspircd.org/Modules/3.0/dnsbl #
# nonick, nonotice, regmoderated, stripcolor, and topiclock. #
# See <options:exemptchanops> in inspircd.conf.example for a more #
# detailed list of the restriction modes that can be exempted. #
-# These are settable using /mode #chan +X <restriction>:<status> #
-#<module name="exemptchanops"> #
+# These are settable using: /MODE #chan +X <restriction>:<status> #
+#<module name="exemptchanops">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides message filtering, similar to SPAMFILTER. #
# #
# Optional - If you specify to use the filter module, then #
# specify below the path to the filter.conf file, or define some #
-# <filter> tags. #
+# <keyword> tags. #
# #
#<include file="examples/filter.conf.example">
# <connect deny="*" geoip="TR,RU">
#
# If enabled you can also ban people from channnels by country code
-# using the G: extban (e.g. /mode #channel +b G:US).
+# using the G: extban (e.g. /MODE #channel +b G:US).
# <geoip extban="yes">
#
# The country code must be in capitals and should be an ISO country
# If you specify to use the helpop module, then specify below the #
# path to the helpop.conf file. #
# #
-#<include file="examples/helpop-full.conf.example">
+#<include file="examples/helpop.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide chans module: Allows users to hide their channels list from non-
#
# Further information on these extensions can be found at the IRCv3
# working group website:
-# http://ircv3.net/irc/
+# https://ircv3.net/irc/
#
#<module name="ircv3">
# The following block can be used to control which extensions are
# extension will get the chghost message and won't see host cycling.
#<module name="ircv3_chghost">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 client-to-client tags module: Provides the message-tags IRCv3
+# extension which allows clients to add extra data to their messages.
+# This is used to support new IRCv3 features such as replies and ids.
+#<module name="ircv3_ctctags">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# IRCv3 echo-message module: Provides the echo-message IRCv3
# extension which allows capable clients to get an acknowledgement when
# The number of seconds to close the channel for:
#<joinflood duration="1m">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Jump server module: Adds support for the RPL_REDIR numeric.
-# This module is oper-only.
-# To use, JUMPSERVER must be in one of your oper class blocks.
-# If your server is redirecting new clients and you get disconnected,
-# do a REHASH from shell to open up again.
-#<module name="jumpserver">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Anti auto rejoin: Adds support for prevention of auto-rejoin (+J).
#<module name="kicknorejoin">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Map hiding module: replaces /MAP and /LINKS output to users with a #
-# message to see a website, set by maphide="http://test.org/map" in #
+# message to see a website, set by maphide="https://test.org/map" in #
# the <security> tag, instead. #
#<module name="maphide">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Named modes module: Allows for the display and set/unset of channel
# modes via long-form mode names via +Z and the /PROP command.
-# For example, to set a ban, do /mode #channel +Z ban=foo!bar@baz or
+# For example, to set a ban, do /MODE #channel +Z ban=foo!bar@baz or
# /PROP #channel ban=foo!bar@baz
#<module name="namedmodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper channels mode: Adds the +O channel mode and extban O:<mask>
# to ban, except, etc. specific oper types. For example
-# /mode #channel +iI O:* is equivalent to channel mode +O, but you
+# /MODE #channel +iI O:* is equivalent to channel mode +O, but you
# may also set +iI O:AdminTypeOnly to only allow admins.
# Modes +I and +e work in a similar fashion.
#<module name="operchans">
# cmd: Command for the user to run when it receives a connect
# password.
- cmd="PRIVMSG $nickrequired :IDENTIFY $pass">
+ cmd="SQUERY $nickrequired :IDENTIFY $pass">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Password hash module: Allows hashed passwords to be used.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remove module: Adds the /REMOVE command which is a peaceful
-# alternative to /KICK.
+# alternative to /KICK. It also provides the /FPART command which works
+# in the same way as /REMOVE.
#<module name="remove">
#
# supportnokicks: If true, /REMOVE is not allowed on channels where the
#<remove supportnokicks="true" protectedrank="50000">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# A module to block, kick or ban upon similar messages being uttered several times.
-# Syntax [~*][lines]:[sec]{[:difference]}{[:matchlines]}
-# ~ is to block, * is to ban, default is kick.
-# lines - In mode 1 the amount of lines that has to match consecutively - In mode 2 the size of the backlog to keep for matching
-# seconds - How old the message has to be before it's invalidated.
-# distance - Edit distance, in percent, between two strings to trigger on.
-# matchlines - When set, the function goes into mode 2. In this mode the function will trigger if this many of the last <lines> matches.
+# Repeat module: Allows to block, kick or ban upon similar messages
+# being uttered several times. Provides channel mode +E.
+#
+# Syntax: [~|*]<lines>:<sec>[:<difference>][:<backlog>]
+# ~ is to block, * is to ban, default is kick.
+# lines - In mode 1, the amount of lines that has to match consecutively.
+# In mode 2, the size of the backlog to keep for matching.
+# seconds - How old the message has to be before it's invalidated.
+# difference - Edit distance, in percent, between two strings to trigger on.
+# backlog - When set, the function goes into mode 2. In this mode the
+# function will trigger if this many of the last <lines> matches.
#
# As this module can be rather CPU-intensive, it comes with some options.
-# maxbacklog - Maximum size that can be specified for backlog. 0 disables multiline matching.
-# maxdistance - Max percentage of difference between two lines we'll allow to match. Set to 0 to disable edit-distance matching.
-# maxlines - Max lines of backlog to match against.
-# maxtime - Maximum period of time a user can set. 0 to allow any.
-# size - Maximum number of characters to check for, can be used to truncate messages
-# before they are checked, resulting in less CPU usage. Increasing this beyond 512
-# doesn't have any effect, as the maximum length of a message on IRC cannot exceed that.
-#<repeat maxbacklog="20" maxlines="20" maxdistance="50" maxtime="0" size="512">
+# maxbacklog - Maximum size that can be specified for backlog. 0 disables
+# multiline matching.
+# maxdistance - Max percentage of difference between two lines we'll allow
+# to match. Set to 0 to disable edit-distance matching.
+# maxlines - Max lines of backlog to match against.
+# maxtime - Maximum period of time a user can set. 0 to allow any.
+# size - Maximum number of characters to check for, can be used to
+# truncate messages before they are checked, resulting in
+# less CPU usage. Increasing this beyond 512 doesn't have
+# any effect, as the maximum length of a message on IRC
+# cannot exceed that.
+#<repeat maxbacklog="20" maxdistance="50 maxlines="20" maxtime="0" size="512">
#<module name="repeat">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers or registered users to
+# Restricted channels module: Allows only opers with the
+# channels/restricted-create priv and/or registered users to
# create channels.
#
# You probably *DO NOT* want to load this module on a public network.
# so that at least \s or [[:space:]] is available.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# RMODE module: Adds the /RMODE command
-# Allows channel mods to remove list modes en masse.
-# Syntax: /rmode <channel> <mode> [pattern]
-# E.g. '/rmode #Channel b m:*' will remove all mute-extbans on the channel.
+# RMODE module: Adds the /RMODE command.
+# Allows channel operators to remove list modes en masse, optionally
+# matching a glob-based pattern.
+# Syntax: /RMODE <channel> <mode> [<pattern>]
+# E.g. '/RMODE #channel b m:*' will remove all mute extbans on the channel.
#<module name="rmode">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# changes their real name. Defaults to to yes if #
# oper-only and no if usable by everyone. #
# #
-#<setname notifyopers="yes" #
-# operonly="no"> #
+#<setname notifyopers="yes"
+# operonly="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Serverban: Implements extended ban 's', which stops anyone connected
# they enter a command. #
# This module adds one command for each <showfile> tag that shows the #
# given file to the user as a series of messages or numerics. #
-#<module name="showfile"> #
+#<module name="showfile">
# #
#-#-#-#-#-#-#-#-#-#-# SHOWFILE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
projects / user / henk / code / inspircd.git / blobdiff