# users that send overly capitalised messages to channels. Unlike the
# blockcaps module this module is more flexible as it has more options
# for punishment and allows channels to configure their own punishment
-# policies.
+# policies.
#<module name="anticaps">
#
# You may also configure the characters which anticaps considers to be
#
# Set the maximum number of lines allowed to be stored per channel below.
# This is the hard limit for 'X'.
-# If notice is set to yes, joining users will get a NOTICE before playback
-# telling them about the following lines being the pre-join history.
+# If prefixmsg is set to yes, joining users without batch support will get
+# a NOTICE before playback telling them about the following lines being
+# the pre-join history.
# If bots is set to yes, it will also send to users marked with +B
-#<chanhistory maxlines="50" notice="yes" bots="yes">
+#<chanhistory maxlines="50" prefixmsg="yes" bots="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel logging module: Used to send snotice output to channels, to
# To use, CLONES must be in one of your oper class blocks.
#<module name="clones">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Codepage module: Allows using a custom 8-bit codepage for nicknames
+# and case mapping.
+#
+# You should include one of the following files to set your codepage:
+#<include file="examples/codepages/ascii.conf.example">
+#<include file="examples/codepages/latin1.conf.example">
+#<include file="examples/codepages/rfc1459.conf.example">
+#<include file="examples/codepages/strict-rfc1459.conf.example">
+#
+# You can also define a custom codepage. For details on how to do this
+# please refer to the docs site:
+# https://docs.inspircd.org/3/modules/codepage
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Common channels module: Adds user mode +c, which, when set, requires
# that users must share a common channel with you to PRIVMSG or NOTICE
# killonbadreply - Whether to kill the user if they send the wrong #
# PONG reply. #
# #
-#<waitpong sendsnotice="yes" killonbadreply="yes">
+#<waitpong sendsnotice="no" killonbadreply="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel cycle module: Adds the /CYCLE command which is a server-side
# the throttling when the server just booted.
#
#<connflood period="30" maxconns="3" timeout="30"
-# quitmsg="Throttled" bootwait="10">
+# quitmsg="Throttled" bootwait="2m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Custom prefixes: Allows for channel prefixes to be configured.
# other modules that need it using the libMaxMindDB library. #
# #
# This module is in extras. Re-run configure with: #
-# ./configure --enable-extras=m_geo_maxmind.cpp
+# ./configure --enable-extras geo_maxmind
# and run make install, then uncomment this module to enable it. #
# #
# This module requires libMaxMindDB to be installed on your system. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# IRCv3 client-to-client tags module: Provides the message-tags IRCv3
-# extension which allows clients to add extra data to their messages.
+# extension which allows clients to add extra data to their messages.
# This is used to support new IRCv3 features such as replies and ids.
#<module name="ircv3_ctctags">
# another user into a channel. This respects <options:announceinvites>.
#<module name="ircv3_invitenotify">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 labeled-response module: Provides the labeled-response IRCv3
+# extension which allows server responses to be associated with the
+# client message which caused them to be sent.
+#<module name="ircv3_labeledresponse">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# IRCv3 message id module: Provides the msgid IRCv3 extension which
# adds a unique identifier to each message when the message-tags cap
# LDAP module: Allows other SQL modules to access a LDAP database
# through a unified API.
# This modules is in extras. Re-run configure with:
-# ./configure --enable-extras=m_ldap.cpp
+# ./configure --enable-extras ldap
# and run make install, then uncomment this module to enable it.
#
#<module name="ldap">
# MySQL module: Allows other SQL modules to access MySQL databases
# through a unified API.
# This module is in extras. Re-run configure with:
-# ./configure --enable-extras=m_mysql.cpp
+# ./configure --enable-extras mysql
# and run make install, then uncomment this module to enable it.
#<module name="mysql">
#
# National characters module:
# 1) Allows using national characters in nicknames.
# 2) Allows using custom (national) casemapping over the network.
+#
+# This module is incredibly poorly written and documented. You should
+# probably use the codepage module instead for 8-bit codepages.
#<module name="nationalchars">
#
# file - Location of the file which contains casemapping rules. If this
# PostgreSQL module: Allows other SQL modules to access PgSQL databases
# through a unified API.
# This module is in extras. Re-run configure with:
-# ./configure --enable-extras=m_pgsql.cpp
+# ./configure --enable-extras pgsql
# and run make install, then uncomment this module to enable it.
#<module name="pgsql">
#
# SSL rehash signal module: Allows the SSL modules to be rehashed by
# sending SIGUSR1 to a running InspIRCd process.
# This modules is in extras. Re-run configure with:
-# ./configure --enable-extras=m_sslrehashsignal.cpp
+# ./configure --enable-extras sslrehashsignal
# and run make install, then uncomment this module to enable it.
#<module name="sslrehashsignal">
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# databases through a unified API. #
# This module is in extras. Re-run configure with: #
-# ./configure --enable-extras=m_sqlite3.cpp
+# ./configure --enable-extras sqlite3
# and run make install, then uncomment this module to enable it. #
#
#<module name="sqlite3">
# Requires SHA-1 hash support available in the sha1 module.
#<module name="websocket">
#
-# Whether to re-encode messages as UTF-8 before sending to WebSocket
-# clients. This is recommended as the WebSocket protocol requires all
-# text frames to be sent as UTF-8. If you do not have this enabled
-# messages will be sent as binary frames instead.
-#<websocket sendastext="yes">
+# proxyranges: A space-delimited list of glob or CIDR matches to trust
+# the X-Real-IP or X-Forwarded-For headers from. If enabled
+# the server will use the IP address specified by those HTTP
+# headers. You should NOT enable this unless you are using
+# a HTTP proxy like nginx as it will allow IP spoofing.
+# sendastext: Whether to re-encode messages as UTF-8 before sending to
+# WebSocket clients. This is recommended as the WebSocket
+# protocol requires all text frames to be sent as UTF-8.
+# If you do not have this enabled messages will be sent as
+# binary frames instead.
+#<websocket proxyranges="192.0.2.0/24 198.51.100.*"
+# sendastext="yes">
#
# If you use the websocket module you MUST specify one or more origins
# which are allowed to connect to the server. You should set this as