# #
# By default, ALL modules are commented out. You must uncomment them #
# or add lines to your config to load modules. Please refer to #
-# http://wiki.inspircd.org/Modules for a list of modules and #
+# https://wiki.inspircd.org/3.0/Modules for a list of modules and #
# each modules link for any additional conf tags they require. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# If a non-oper attempts to use the alias, it will #
# appear to not exist. #
# #
-#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-#<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-#<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
-#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-#<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-#<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
#
# An example of using the format value to create an alias with two
# different behaviours depending on the format of the parameters.
#
# This alias fixes a glitch in xchat 2.6.x and above and the way it
# assumes IDENTIFY must be prefixed by a colon (:) character. It should
-# be placed ABOVE the default NICKSERV alias (the first example) listed
-# above.
+# be placed ABOVE the default NICKSERV alias.
#
#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
# requires="NickServ" uline="yes">
# If you have the blockamsg module loaded, you can configure it with #
# the <blockamsg> tag: #
# #
-# delay - How many seconds between two messages to force #
-# them to be recognised as unrelated. #
+# delay - How much time between two messages to force them #
+# to be recognised as unrelated. #
# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
# or 'killopers'. Define how to take action when #
# a user uses /amsg or /ame. #
# tracknick - Preserve /accept entries when a user changes nick? #
# If no (the default), the user is removed from #
# everyone's accept list if he changes nickname. #
-# cooldown - Amount of time (in seconds) that must pass since #
-# the last notification sent to a user before he can #
-# be sent another. Default is 60 (1 minute). #
+# cooldown - Amount of time that must pass since the last #
+# notification sent to a user before he can be sent #
+# another. Default is 1 minute. #
#<callerid maxaccepts="16"
# operoverride="no"
# tracknick="no"
-# cooldown="60">
+# cooldown="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CAP module: Provides the CAP negotiation mechanism required by the
# #
# Optional - If you specify to use the censor module, then you must #
# specify some censor tags. See also: #
-# http://wiki.inspircd.org/Modules/censor #
+# https://wiki.inspircd.org/Modules/3.0/censor #
#
#<include file="examples/censor.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-# Adds snomask +w for monitoring CGI:IRC connections.
+# CGI:IRC module: Enables forwarding the real IP address of a user from
+# a gateway to the IRC server.
#<module name="cgiirc">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
-# Optional - If you specify to use cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: http://wiki.inspircd.org/Modules/cgiirc
-#
-# Set to yes if you want to notice opers when CGI:IRC clients connect.
+# If you use the cgiirc module then you must specify the gateways which
+# are authorised to forward IP/host information to your server. There
+# are currently two ways to do this:
+#
+# The webirc method is the recommended way to allow gateways to forward
+# IP/host information. When using this method the gateway sends a WEBIRC
+# message to the server on connection. For more details please read the
+# IRCv3 WebIRC specification at http://ircv3.net/specs/extensions/webirc.html.
+#
+# When using this method you must specify a wildcard mask or CIDR range
+# to allow gateway connections from and at least one of either a SSL
+# client certificate fingerprint for the gateway or a password to be
+# sent in the WEBIRC command.
+#
+# <cgihost type="webirc"
+# fingerprint="bd90547b59c1942b85f382bc059318f4c6ca54c5"
+# mask="192.0.2.0/24">
+# <cgihost type="webirc"
+# password="$2a$10$WEUpX9GweJiEF1WxBDSkeODBstIBMlVPweQTG9cKM8/Vd58BeM5cW"
+# hash="bcrypt"
+# mask="*.webirc.gateway.example.com">
+#
+# Alternatively if your gateway does not support sending the WEBIRC
+# message then you can configure InspIRCd to look for the client IP
+# address in the ident sent by the user. This is not recommended as it
+# only works with IPv4 connections.
+#
+# When using this method you must specify a wildcard mask or CIDR range to
+# allow gateway connections from.
+#
+# <cgihost type="ident" mask="198.51.100.0/24">
+# <cgihost type="ident" mask="*.ident.gateway.example.com">
+#
+# By default gateway connections are logged to the +w snomask. If you
+# do not want this to happen then you can uncomment this to disable it.
# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="pass" mask="www.example.com"> # Get IP from PASS
-# <cgihost type="ident" mask="otherbox.example.com"> # Get IP from ident
-# <cgihost type="passfirst" mask="www.example.com"> # See the docs
-# New style:
-# <cgihost type="webirc" password="foobar"
-# mask="somebox.example.com"> # Get IP from WEBIRC
-#
+
# IMPORTANT NOTE:
# ---------------
#
-# When you connect CGI:IRC clients, there are two connect classes which
+# When you connect gateway clients, there are two connect classes which
# apply to these clients. When the client initially connects, the connect
-# class which matches the CGI:IRC site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
+# class which matches the gateway site's host is checked. Therefore you
+# must raise the maximum local/global clients for this IP as high as you
+# want to allow gateway clients. After the client has connected and is
+# determined to be a gateway client, the class which matches the client's
# real IP is then checked. You may set this class to a lower value, so that
# the real IP of the client can still be restricted to, for example, 3
# sessions maximum.
# #
# There are two methods of cloaking: #
# #
-# half Cloak only the "unique" portion of a host; show #
-# the last 2 parts of the domain, /16 subnet of IPv4 #
-# or /48 subnet of the IPv6 address. #
+# half Cloak only the "unique" portion of a host; by #
+# default show the last 2 parts of the domain, #
+# /16 subnet of IPv4 or /48 subnet of the IPv6 #
+# address. #
+# To change the number of shown parts, modify the #
+# domainparts option. #
# #
# full Cloak the users completely, using three slices for #
# common CIDR bans (IPv4: /16, /24; IPv6: /48, /64). #
#
#<cloak mode="half"
# key="secret"
+# domainparts="3"
# prefix="net-">
#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<module name="connflood">
#
#-#-#-#-#-#-#-#-#-#-#- CONNTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-# seconds, maxconns - Amount of connections per <seconds>.
+# period, maxconns - Amount of connections per <period>.
#
# timeout - Time to wait after the throttle was activated
# before deactivating it. Be aware that the time
# quitmsg="Throttled" bootwait="10">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Custom prefixes: Allows for channel prefixes to be added.
+# Custom prefixes: Allows for channel prefixes to be configured.
#<module name="customprefix">
#
# name The name of the mode, must be unique from other modes.
# rank A numeric rank for this prefix, defining what permissions it gives.
# The rank of voice, halfop and op is 10000, 20000, and 30000,
# respectively.
-# ranktoset The numeric rank required to set/unset this mode. Defaults to rank.
+# ranktoset The numeric rank required to set this mode. Defaults to rank.
+# ranktounset The numeric rank required to unset this mode. Defaults to ranktoset.
# depriv Can you remove the mode from yourself? Defaults to yes.
#<customprefix name="founder" letter="q" prefix="~" rank="50000" ranktoset="50000">
#<customprefix name="admin" letter="a" prefix="&" rank="40000" ranktoset="50000">
#<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
-#<customprefix name="halfvoice" letter="V" prefix="-" rank="1" ranktoset="20000">
+#
+# You can also override the configuration of prefix modes added by both the core
+# and other modules by adding a customprefix tag with change="yes" specified.
+# <customprefix name="op" change="yes" rank="30000" ranktoset="30000">
+# <customprefix name="voice" change="yes" rank="10000" ranktoset="10000" depriv="no">
#
# Do /RELOADMODULE customprefix after changing the settings of this module.
#
#<title name="foo" password="bar" title="Official Chat Helper">
#<title name="bar" password="foo" host="ident@test.org" title="Official Chat Helper" vhost="helper.test.org">
-#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper">
+#<title name="foo" password="$2a$10$UYZ4OcO8NNTCCGyCdY9SK.2GHiqGgxZfHFPOPmWuxEVWVQTtoDC7C" hash="bcrypt" title="Official Chat Helper">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command.
#<goodchan name="#funtimes"> #
# Glob masks are accepted here also. #
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Devoice module: Let users devoice themselves using /DEVOICE #chan.
-#<module name="devoice">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DNS blacklist module: Provides support for looking up IPs on one or #
# more blacklists. #
#<module name="dnsbl"> #
# #
# For configuration options please see the wiki page for dnsbl at #
-# http://wiki.inspircd.org/Modules/dnsbl #
+# https://wiki.inspircd.org/Modules/3.0/dnsbl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Exempt channel operators module: Provides support for allowing #
#
#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
-# See http://wiki.inspircd.org/Modules/hostchange for help. #
+# See https://wiki.inspircd.org/Modules/3.0/hostchange for help. #
# #
#<host suffix="invalid.org" separator="." prefix="">
#<hostchange mask="*@42.theanswer.example.org" action="addnick">
# httpd_* modules to provide pages to display.
#
# You can adjust the timeout for HTTP connections below. All HTTP
-# connections will be closed after (roughly) this many seconds.
+# connections will be closed after (roughly) this time period.
#<httpd timeout="20">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#<inviteexception bypasskey="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# IRCv3 module: Provides the following IRCv3.1 extensions:
+# IRCv3 module: Provides the following IRCv3 extensions:
# extended-join, away-notify and account-notify. These are optional
# enhancements to the client-to-server protocol. An extension is only
# active for a client when the client specifically requests it, so this
#
# Further information on these extensions can be found at the IRCv3
# working group website:
-# http://ircv3.org/extensions/
+# http://ircv3.net/irc/
#
#<module name="ircv3">
# The following block can be used to control which extensions are
# another user into a channel. This respects <options:announceinvites>.
#<module name="ircv3_invitenotify">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# IRCv3 Strict Transport Security module: Provides the sts IRCv3.2
+# extension which allows clients connecting insecurely to upgrade their
+# connections to TLS.
+#<module name="ircv3_sts">
+#
+# If using the ircv3_sts module you MUST define a STS policy to send
+# to clients using the <sts> tag. This tag takes the following
+# attributes:
+#
+# host - A glob match for the SNI hostname to apply this policy to.
+# duration - The amount of time that the policy lasts for. Defaults to
+# approximately two months by default.
+# port - The port on which TLS connections to the server are being
+# accepted. You MUST have a CA-verified certificate on this
+# port. Self signed certificates are not acceptable.
+# preload - Whether client developers can include your certificate in
+# preload lists.
+#
+# <sts host="*.example.com" duration="60d" port="6697" preload="yes">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Join flood module: Adds support for join flood protection +j X:Y.
-# Closes the channel for 60 seconds if X users join in Y seconds.
+# Closes the channel for N seconds if X users join in Y seconds.
#<module name="joinflood">
+#
+# The number of seconds to close the channel for:
+#<joinflood duration="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Jump server module: Adds support for the RPL_REDIR numeric.
# allowpattern="Guest* Bot*" #
# killreason="Access denied" #
# verbose="yes" #
-# host="$uid.$ou.inspircd.org"> #
+# host="$uid.$ou.inspircd.org" #
+# useusername="no"> #
# #
# <ldapwhitelist cidr="10.42.0.0/16"> #
# #
# regardless of if they have an account, for example guest and bot #
# users. #
# #
+# The useusername setting chooses whether the user's username or #
+# nickname is used when locating a user account, if a username isn't #
+# provided in PASS. #
+# #
# Killreason indicates the QUIT reason to give to users if they fail #
# to authenticate. #
# #
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# mysql is more complex than described here, see the wiki for more #
-# info: http://wiki.inspircd.org/Modules/mysql #
+# info: https://wiki.inspircd.org/Modules/3.0/mysql #
#
#<database module="mysql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database2">
# Nickchange flood protection module: Provides channel mode +F X:Y
# which allows up to X nick changes in Y seconds.
#<module name="nickflood">
+#
+# The number of seconds to prevent nick changes for:
+#<nickflood duration="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Password hash module: Allows hashed passwords to be used.
-# To be useful, a hashing module like sha256 also needs to be loaded.
+# To be useful, a hashing module like bcrypt also needs to be loaded.
#<module name="password_hash">
#
#-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
#
# <oper name="Brain"
# host="ident@dialup15.isp.test.com"
-# hash="sha256"
-# password="01ba4719c80b6fe911b091a7c05124b64eeece964e09c058ef8f9805daca546b"
+# hash="bcrypt"
+# password="$2a$10$Mss9AtHHslZTLBrXqM0FB.JBwD.UTSu8A48SfrY9exrpxbsRiRTbO"
# type="NetAdmin">
#
-# Starting from 2.0, you can use a more secure salted hash that prevents simply
-# looking up the hash's value in a rainbow table built for the hash.
+# If you are using a hash algorithm which does not perform salting you can use
+# HMAC to salt your passwords in order to prevent them from being looked up in
+# a rainbow table.
+#
# hash="hmac-sha256" password="lkS1Nbtp$CyLd/WPQXizsbxFUTqFRoMvaC+zhOULEeZaQkUJj+Gg"
#
# Generate hashes using the /MKPASSWD command on the server.
#<include file="permchannels.conf">
#
# You may also create channels on startup by using the <permchannels> block.
-# Don't forget to set them +P in the modes, or they won't stay permanent.
#<permchannels channel="#opers" modes="isP" topic="Opers only.">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# pgsql is more complex than described here, see the wiki for #
-# more: http://wiki.inspircd.org/Modules/pgsql #
+# pgsql is more complex than described here, see the wiki for #
+# more: https://wiki.inspircd.org/Modules/3.0/pgsql #
#
#<database module="pgsql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database" ssl="no">
# maxbacklog - Maximum size that can be specified for backlog. 0 disables multiline matching.
# maxdistance - Max percentage of difference between two lines we'll allow to match. Set to 0 to disable edit-distance matching.
# maxlines - Max lines of backlog to match against.
-# maxsecs - Maximum value of seconds a user can set. 0 to allow any.
+# maxtime - Maximum period of time a user can set. 0 to allow any.
# size - Maximum number of characters to check for, can be used to truncate messages
# before they are checked, resulting in less CPU usage. Increasing this beyond 512
# doesn't have any effect, as the maximum length of a message on IRC cannot exceed that.
-#<repeat maxbacklog="20" maxlines="20" maxdistance="50" maxsecs="0" size="512">
+#<repeat maxbacklog="20" maxlines="20" maxdistance="50" maxtime="0" size="512">
#<module name="repeat">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Layer via AUTHENTICATE. Note: You also need to have cap loaded
# for SASL to work.
#<module name="sasl">
+# Define the following to your services server name to improve security
+# by ensuring the SASL messages are only sent to the services server
+# and not to all connected servers. This prevents a rogue server from
+# capturing SASL messages and disables the SASL cap when services is
+# down.
+#<sasl target="services.mynetwork.com">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Secure list module: Prevent /LIST in the first minute of connection,
#
#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Securelist can be harmful to some IRC search engines such as #
-# netsplit.de and searchirc.com. To prevent securelist blocking these #
-# sites from listing, define exception tags as shown below: #
-#<securehost exception="*@*.searchirc.org">
+# Securelist can be harmful to some IRC search engines. To prevent #
+# securelist blocking these sites from listing, define exception tags #
+# as shown below: #
#<securehost exception="*@*.netsplit.de">
-#<securehost exception="*@echo940.server4you.de">
#<securehost exception="*@*.ircdriven.com">
+#<securehost exception="*@*.ircs.me">
# #
# Define the following variable to change how long a user must wait #
# before issuing a LIST. If not defined, defaults to 60 seconds. #
# #
-#<securelist waittime="60"> #
+#<securelist waittime="1m"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Servprotect module: Provides support for Austhex style +k /
# You can optionally let the user know that their command was blocked.
#
# You may also let SHUN affect opers (defaults to no).
-#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
+#<shun enabledcommands="ADMIN PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL channel mode module: Adds support for SSL-only channels via
# channel mode +z and the 'z' extban which matches SSL client
# certificate fingerprints.
-# Does not do anything useful without a working SSL module (see below).
+# Does not do anything useful without a working SSL module and the
+# sslinfo module (see below).
#<module name="sslmodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# ssl_gnutls is too complex to describe here, see the wiki: #
-# http://wiki.inspircd.org/Modules/ssl_gnutls #
+# https://wiki.inspircd.org/Modules/3.0/ssl_gnutls #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL info module: Allows users to retrieve information about other
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# ssl_openssl is too complex to describe here, see the wiki: #
-# http://wiki.inspircd.org/Modules/ssl_openssl #
+# https://wiki.inspircd.org/Modules/3.0/ssl_openssl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip color module: Adds channel mode +S that strips color codes and
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# databases through a unified API. #
# This module is in extras. Re-run configure with: #
-# ./configure --enable-extras=m_sqlite.cpp
+# ./configure --enable-extras=m_sqlite3.cpp
# and run make install, then uncomment this module to enable it. #
#
#<module name="sqlite3">
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# sqlite is more complex than described here, see the wiki for more #
-# info: http://wiki.inspircd.org/Modules/sqlite3 #
+# info: https://wiki.inspircd.org/Modules/3.0/sqlite3 #
#
#<database module="sqlite" hostname="/full/path/to/database.db" id="anytext">
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# sqlauth is too complex to describe here, see the wiki: #
-# http://wiki.inspircd.org/Modules/sqlauth #
+# https://wiki.inspircd.org/Modules/3.0/sqlauth #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL oper module: Allows you to store oper credentials in an SQL table
# dbid - Database ID to use (see SQL modules). #
# hash - Hashing provider to use for password hashing. #
# #
-# See also: http://wiki.inspircd.org/Modules/sqloper #
+# See also: https://wiki.inspircd.org/Modules/3.0/sqloper #
# #
-#<sqloper dbid="1" hash="md5">
+#<sqloper dbid="1" hash="bcrypt">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# StartTLS module: Implements STARTTLS, which allows clients #
# host - Vhost to set. #
#
#<vhost user="some_username" pass="some_password" host="some.host.test.cc">
-#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host.example.com">
+#<vhost user="foo" password="$2a$10$iTuYLT6BRhRlOgzfsW9oPe62etW.oXwSpyKw5rJit64SGZanLXghO" hash="bcrypt" host="some.other.host.example.com">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
#<module name="xline_db">
# Specify the filename for the xline database here.
-#<xlinedb filename="data/xline.db">
+#<xlinedb filename="xline.db">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ____ _ _____ _ _ ____ _ _ _ #