#<module name="callerid">
#
#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# maxaccepts - Maximum number of entries a user can add to his #
-# /ACCEPT list. Default is 16 entries. #
-# tracknick - Preserve /accept entries when a user changes nick? #
+# maxaccepts - Maximum number of entries a user can add to their #
+# /ACCEPT list. Default is 30 entries. #
+# tracknick - Preserve /ACCEPT entries when a user changes nick? #
# If no (the default), the user is removed from #
-# everyone's accept list if he changes nickname. #
+# everyone's accept list if their nickname changes. #
# cooldown - Amount of time that must pass since the last #
-# notification sent to a user before he can be sent #
-# another. Default is 1 minute. #
-#<callerid maxaccepts="16"
+# notification sent to a user before they can be #
+# sent another. Default is 1 minute. #
+#<callerid maxaccepts="30"
# tracknick="no"
# cooldown="1m">
#<module name="cban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Censor module: Adds channel and user mode +G.
+# Censor module: Adds channel and user mode +G which block phrases that
+# are listed in the server bad words list.
#<module name="censor">
#
#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the censor module, then you must #
-# specify some censor tags. See also: #
-# https://wiki.inspircd.org/Modules/3.0/censor #
-#
-#<include file="examples/censor.conf.example">
+# If you have the censor module loaded you should specify one or more #
+# phrases to replace/block in user messages. The config for this is #
+# formatted as follows: #
+# #
+# Replaces "eggplant" with "aubergine" within messages: #
+# <badword text="eggplant" replace="aubergine"> #
+# #
+# Blocks messages that contain "fluffy capybaras": #
+#<badword text="fluffy capybaras"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CGI:IRC module: Enables forwarding the real IP address of a user from
#<module name="chgname">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connection class ban module: Adds support for extban 'n' which
+# Connection class ban module: Adds support for extban 'n' which
# matches against the class name of the user's connection.
# This module assumes that connection classes are named in a uniform
# way on all servers of the network.
#<module name="classban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Clear chan module: Allows opers to masskick, masskill or mass-G/ZLine
-# all users on a channel using /CLEARCHAN.
+# Clear chan module: Allows opers to masskick, masskill or
+# mass G/Z-line all users on a channel using /CLEARCHAN.
#<module name="clearchan">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# To use cloaking, you must define a cloak key, and optionally a #
# cloak prefix as shown below. The cloak key must be shared across #
-# the network for correct cloaking. #
+# the network for consistent cloaking and must be at least thirty #
+# characters long. #
# #
# There are two methods of cloaking: #
# #
# #
# The methods use a single key that can be any length of text. #
# An optional prefix may be specified to mark cloaked hosts. #
+# #
+# IMPORTANT: Changing these details will break all of your existing #
+# bans. If you do not want this to happen you can define multiple #
+# cloak tags. The first will be used for cloaking and the rest will #
+# be used for checking if a user is banned in a channel. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
#<cloak mode="half"
-# key="secret"
+# key="changeme"
# domainparts="3"
# prefix="net-">
+#
+#<cloak mode="full"
+# key="changeme"
+# prefix="net-">
#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Close module: Allows an oper to close all unregistered connections.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connectban: Provides IP connection throttling. Any IP range that
-# connects too many times (configurable) in an hour is Z-Lined for a
+# connects too many times (configurable) in an hour is Z-lined for a
# (configurable) duration, and their count resets to 0.
#<module name="connectban">
#
#<goodchan name="#funtimes"> #
# Glob masks are accepted here also. #
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Disable module: Provides support for disabling commands and modes. #
+#<module name="disable">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- DISABLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the disable module loaded then you need to specify the #
+# commands and modes that you want disabled. Users who have not fully #
+# connected yet are exempt from this module so you can e.g. disable #
+# the NICK command but still allow users to connect to the server. #
+# #
+# commands - A space-delimited list of commands that can not be used #
+# by users. You can exempt server operators from this with #
+# the servers/use-disabled-commands privilege. #
+# #
+# chanmodes - One or more channel modes that can not be added/removed #
+# by users. You can exempt server operators from this #
+# with the servers/use-disabled-commands privilege. #
+# #
+# usermodes - One or more user modes that can not be added/removed by #
+# users. You can exempt server operators from this with #
+# the servers/use-disabled-commands privilege. #
+# #
+# fakenonexistent - Whether to pretend that a disabled command/mode #
+# does not exist when executed/changed by a user. #
+# Defaults to no. #
+# #
+# notifyopers - Whether to send a notice to snomask `a` when a user #
+# is prevented from using a disabled command/mode. #
+# Defaults to no. #
+# #
+#<disabled commands="KICK TOPIC" #
+# chanmodes="kp" #
+# usermodes="iw" #
+# fakenonexistent="yes" #
+# notifyopers="no"> #
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DNS blacklist module: Provides support for looking up IPs on one or #
# more blacklists. #
# the timeout for ident lookups here. If not defined, it will default #
# to 5 seconds. This is a non-blocking timeout which holds the user #
# in a 'connecting' state until the lookup is complete. #
-# The bind value indicates which IP to bind outbound requests to. #
# nolookupprefix: If on, the idents of users being in a connect class #
# with ident lookups disabled (i.e. <connect useident="off">) will be #
# prefixed with a "~". If off, the ident of those users will not be #
# Oper modes module: Allows you to specify modes to add/remove on oper.
# Specify the modes as the 'modes' parameter of the <type> tag
# and/or as the 'modes' parameter of the <oper> tag.
-# This module is oper-only. For the user equivalent, see the
+# This module is oper-only. For the user equivalent, see the
# conn_umodes module.
#<module name="opermodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for glob or wildcard (?/*) matching.
-# You must have at least 1 provider loaded to use the filter or rline
+# You must have at least 1 provider loaded to use the filter or R-line
# modules. This module has no additional requirements, as it uses the
# matching already present in InspIRCd core.
#<module name="regex_glob">
# Regular expression provider for PCRE (Perl-Compatible Regular
# Expressions). You need libpcre installed to compile and load this
# module. You must have at least 1 provider loaded to use the filter or
-# rline modules.
+# R-line modules.
#<module name="regex_pcre">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for POSIX regular expressions.
# You shouldn't need any additional libraries on a POSIX-compatible
# system (i.e.: any Linux, BSD, but not Windows). You must have at
-# least 1 provider loaded to use filter or rline.
+# least 1 provider loaded to use the filter or R-line modules.
# On POSIX-compliant systems, regex syntax can be found by using the
# command: 'man 7 regex'.
#<module name="regex_posix">
# to compile and load this module.
#<module name="regex_tre">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Registered users only channel creation module. If enabled, only
-# registered users and opers can create new channels.
-#
-# You probably *DO NOT* want to load this module on a public network.
-#
-#<module name="regonlycreate">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remove module: Adds the /REMOVE command which is a peaceful
# alternative to /KICK.
#<module name="repeat">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels.
+# Restricted channels module: Allows only opers or registered users to
+# create channels.
#
# You probably *DO NOT* want to load this module on a public network.
#
#<module name="restrictchans">
+#
+# allowregistered: should registered users be allowed to bypass the restrictions?
+#<restrictchans allowregistered="no">
+#
+# Allow any channel matching #user-* to be created, bypassing restrictchans checks
+#<allowchannel name="#user-*">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restrict message module: Allows users to only message opers.
#<module name="restrictmsg">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# R-Line module: Ban users through regular expression patterns.
+# R-line module: Ban users through regular expression patterns.
#<module name="rline">
#
#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# useful under some situations, but *can* also use CPU with more users
# on a server) then set 'matchonnickchange' to yes.
# Also, this is where you set what Regular Expression engine is to be
-# used. If you ever change it while running, all of your R-Lines will
-# be wiped. This is the regex engine used by all R-Lines set, and
+# used. If you ever change it while running, all of your R-lines will
+# be wiped. This is the regex engine used by all R-lines set, and
# regex_<engine> must be loaded, or rline will be non-functional
# until you load it or change the engine to one that is loaded.
#
#<rline matchonnickchange="yes" engine="pcre">
#
-# Generally, you will NOT want to use 'glob' here, as this turns
-# rline into just another gline. The exceptions are that rline will
+# Generally, you will NOT want to use 'glob' here, as this turns an
+# R-line into just another G-line. The exceptions are that R-lines will
# always use the full "nick!user@host realname" string, rather than only
# user@host, but beware that only the ? and * wildcards are available,
# and are the only way to specify where the space can occur if you do
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SETNAME module: Adds the /SETNAME command.
#<module name="setname">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SETNAME CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# operonly - Whether the SETNAME command should only be usable by #
+# server operators. Defaults to no. #
+# #
+# notifyopers - Whether to send a snotice to snomask `a` when a user #
+# changes their real name. Defaults to to yes if #
+# oper-only and no if usable by everyone. #
+# #
+#<setname notifyopers="yes" #
+# operonly="no"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Serverban: Implements extended ban 's', which stops anyone connected
#<module name="starttls">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
+# SVSHold module: Implements SVSHOLD. Like Q-lines, but can only be #
# added/removed by Services. #
#<module name="svshold">
# SVSHOLD does not generate server notices by default, you can turn
# which are allowed to connect to the server. You should set this as
# strict as possible to prevent malicious webpages from connecting to
# your server.
-# <wsorigin allow="https://webchat.example.com/*">
+# <wsorigin allow="https://*.example.com/">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
+# XLine database: Stores all *-lines (G/Z/K/R/any added by other modules)
# in a file which is re-loaded on restart. This is useful
# for two reasons: it keeps bans so users may not evade them, and on
# bigger networks, server connections will take less time as there will
projects / user / henk / code / inspircd.git / blobdiff