# specify some censor tags. See also: #
# http://wiki.inspircd.org/Modules/censor #
#
-#<include file="conf/examples/censor.conf.example">
+#<include file="examples/censor.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
# This is the hard limit for 'X'.
# If notice is set to yes, joining users will get a NOTICE before playback
# telling them about the following lines being the pre-join history.
-#<chanhistory maxlines="20" notice="yes">
+# If bots is set to yes, it will also send to users marked with +B
+#<chanhistory maxlines="20" notice="yes" bots="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel logging module: used to send snotice output to channels, to
# in a channel matching a mask like +b j:#channel*mask from joining.
#<module name="m_channelban.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Chanprotect module: gives +q and +a channel modes
-#<module name="m_chanprotect.so">
-
-<chanprotect
- # noservices: With this set to yes, when a user joins a empty channel,
- # the server will set +q on them. If set to no, it will only set +o
- # on them until they register the channel.
- noservices="no"
-
- # qprefix: Prefix (symbol) to use for +q users.
- qprefix="~"
-
- # aprefix: Prefix (symbol) to use for +a users.
- aprefix="&"
-
- # deprotectself: If this value is set (true, yes or 1), it will allow
- # +a and +q users to remove the +a and +q from themselves, otherwise,
- # the status will have to be removed by services.
- deprotectself="yes"
-
- # deprotectothers: If this value is set to yes, true, or 1, then any
- # user with +q or +a may remove the +q or +a from other users.
- deprotectothers="yes">
-
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Check module: gives /check
# Check is useful for looking up information on channels,
# cloak prefix as shown below. The cloak key must be shared across #
# the network for correct cloaking. #
# #
-# There are four methods of cloaking: #
+# There are two methods of cloaking: #
# #
# half Cloak only the "unique" portion of a host; show #
# the last 2 parts of the domain, /16 subnet of IPv4 #
# full Cloak the users completely, using three slices for #
# common CIDR bans (IPv4: /16, /24; IPv6: /48, /64) #
# #
-# These methods use a single key that can be any length of text. #
+# The methods use a single key that can be any length of text. #
# An optional prefix may be specified to mark cloaked hosts. #
-# #
-# The following methods are maintained for backwards compatibility; #
-# they are slightly less secure, and always hide unresolved IPs #
-# #
-# compat-host InspIRCd 1.2-compatible host-based cloaking #
-# compat-ip InspIRCd 1.2-compatible ip-always cloaking #
-# #
-# If you use a compat cloaking mode then you must specify key1, key2, #
-# key3, key4; the values must be less than 0x80000000 and should be #
-# picked at random. Prefix is mandatory, will default to network name #
-# if not specified, and will always have a "-" appended. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
#<cloak mode="half"
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Custom prefixes: allows for channel prefixes to be added.
-# This replaces m_chanprotect and m_halfop.
#<module name="m_customprefix.so">
#
# name The name of the mode, must be unique from other modes
# specfiy below the path to the filter.conf file, or define some #
# <filter> tags. #
# #
-#<include file="conf/examples/filter.conf.example">
+#<include file="examples/filter.conf.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Gecosban: Implements extended ban r:, which stops anyone matching
# must be in one of your oper class blocks.
#<module name="m_globalload.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Halfop module: Provides the +h (halfops) channel status mode.
-#<module name="m_halfop.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HELPOP module: Provides the /HELPOP command
#<module name="m_helpop.so">
# specify below the path to the helpop.conf file, or if you like to #
# make a mess, define your helpop tags in this conf. #
# #
-#<include file="conf/examples/inspircd.helpop-full.example">
+#<include file="examples/inspircd.helpop-full.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HIDECHANS module: Allows users to hide their channels list from non-
#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
+# hostcycle: If loaded, when a user gets a host or ident set, it will
+# cycle them in all their channels. If not loaded it will simply change
+# their host/ident without cycling them.
+#<module name="m_hostcycle.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# httpd module: Provides http server support for InspIRCd
#<module name="m_httpd.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
#<module name="m_kicknorejoin.so">
-# Set the maximum time that is accepted as a parameter for +J here.
-#<kicknorejoin maxtime="1m">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Knock module: adds the /KNOCK command and +K channel mode
# Read the comment above <connect:allowmotdcolors> in #
# inspircd.conf.example for details. #
# #
-#<opermotd file="conf/examples/opermotd.txt.example" onoper="yes" processcolors="false">
+#<opermotd file="examples/opermotd.txt.example" onoper="yes" processcolors="false">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override
# m_rline.
#<module name="m_regex_pcre.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Regular Expression Provider for RE2 Regular Expressions.
+# You need libre2 installed and in your include/library paths in order
+# to compile and load this module.
+#<module name="m_regex_re2.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular Expression Provider for POSIX Regular Expressions.
# You shouldn't need any additional libraries on a POSIX-compatible
# alternative to /KICK
#<module name="m_remove.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# A module to block, kick or ban upon similiar messages being uttered several times.
+# Syntax [~*][lines]:[sec]{[:difference]}{[:matchlines]}
+# ~ is to block, * is to ban, default is kick.
+# lines - In mode 1 the amount of lines that has to match consecutively - In mode 2 the size of the backlog to keep for matching
+# seconds - How old the message has to be before it's invalidated.
+# distance - Edit distance, in percent, between two strings to trigger on.
+# matchlines - When set, the function goes into mode 2. In this mode the function will trigger if this many of the last <lines> matches.
+#
+# As this module can be rather CPU-intensive, it comes with some options.
+# maxbacklog - Maximum size that can be specified for backlog. 0 disables multiline matching.
+# maxdistance - Max percentage of difference between two lines we'll allow to match. Set to 0 to disable edit-distance matching.
+# maxlines - Max lines of backlog to match against.
+# maxsecs - Maximum value of seconds a user can set. 0 to allow any.
+# size - Maximum number of characters to check for, can be used to truncate messages
+# before they are checked, resulting in less CPU usage. Increasing this beyond 512
+# doesn't have any effect, as the maximum length of a message on IRC cannot exceed that.
+#<repeat maxbacklog="20" maxlines="20" maxdistance="50" maxsecs="0" size="512">
+#<module name="m_repeat.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restricted channels module: Allows only opers to create channels.
#
# use glob. For this reason, is recommended to use a real regex engine
# so that at least \s or [[:space:]] is available.
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# RMODE module: Adds the /RMODE command
+# Allows channel mods to remove list modes en masse.
+# Syntax: /rmode <channel> <mode> [pattern]
+# E.g. '/rmode #Channel b m:*' will remove all mute-extbans on the channel.
+#<module name="m_rmode.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command
# This module is oper-only.
projects / user / henk / code / inspircd.git / blobdiff