#<blockamsg delay="3" action="killopers">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block CAPS module: Blocking all-CAPS messages with channel mode +B.
+# Block CAPS module: Adds channel mode +B, blocks all-CAPS messages.
#<module name="m_blockcaps.so">
#
#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# minlen - The minimum length a line must be for the block #
# percent to have any effect. #
# #
-# capsmap - A list of chars to be considered CAPS, this was #
-# you can add CAPS for your language. Also you can #
-# add things like ! and space to further lock down #
-# on caps usage. #
+# capsmap - A list of chars to be considered CAPS. Can be used #
+# to add CAPS characters for your language. Also you #
+# can add things like ! and space to further lock #
+# down on caps usage. #
#<blockcaps percent="50"
# minlen="5"
# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CallerID module: Adds usermode +g which activates hybrid-style
-# callerid: block all private messages unless you /accept first
+# callerid: block all private messages unless you /ACCEPT first.
#<module name="m_callerid.so">
#
#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# maxaccepts - Maximum number of entries a user can add to his #
-# /accept list. Default is 16 entries. #
+# /ACCEPT list. Default is 16 entries. #
# operoverride - Can opers (note: ALL opers) override callerid? #
# Default is no. #
# tracknick - Preserve /accept entries when a user changes nick? #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CBAN module: Lets you disallow channels from being used at runtime.
-# This module is oper-only and provides /cban.
+# This module is oper-only and provides /CBAN.
# To use, CBAN must be in one of your oper class blocks.
#<module name="m_cban.so">
#<module name="m_chgident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CHGNAME module: Adds the /CHGNAME command
+# CHGNAME module: Adds the /CHGNAME command.
# This module is oper-only.
# To use, CHGNAME must be in one of your oper class blocks.
#<module name="m_chgname.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support.
# Relies on the module m_md5.so being loaded.
-# To use, you should enable m_conn_umodes and add +x as
-# an enabled mode. See the m_conn_umodes module for more information.
+# To cloak users when they connect, load m_conn_umodes and set
+# <connect:modes> to include the +x mode. The example <connect> tag
+# shows this. See the m_conn_umodes module for more information.
#<module name="m_cloaking.so">
#
#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Valid engines are: #
# #
-# glob - Glob patterns, provided via m_regex_glob.so #
-# pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre #
-# tre - TRE regexps, provided via m_regex_tre.so, requires libtre #
-# posix - POSIX regexps, provided via m_regex_posix.so, not availale #
-# on windows, no dependencies on other operating systems. #
+# glob - Glob patterns, provided via m_regex_glob. #
+# pcre - PCRE regexps, provided via m_regex_pcre, needs libpcre. #
+# tre - TRE regexps, provided via m_regex_tre, requires libtre. #
+# posix - POSIX regexps, provided via m_regex_posix, not available #
+# on Windows, no dependencies on other operating systems. #
+# stdlib - stdlib regexps, provided via m_regex_stdlib, see comment #
+# at the <module> tag for info on availability. #
# #
#<filteropts engine="glob"> #
# #
# Your choice of regex engine must match on all servers network-wide.
#
-# You may specify specific channels that are exempt from being filtered:
-#<exemptfromfilter target="#opers">
+# To learn more about the configuration of this module, read #
+# examples/filter.conf.example, which covers the various types of #
+# filters and shows how to add exemptions. #
#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Global load module: Allows loading and unloading of modules network-
# wide (USE WITH EXTREME CAUTION!)
-# This module is oper-only and provides /gloadmodule, /gunloadmodule
-# and /greloadmodule.
+# This module is oper-only and provides /GLOADMODULE, /GUNLOADMODULE
+# and /GRELOADMODULE.
# To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE
# must be in one of your oper class blocks.
#<module name="m_globalload.so">
# default to 5 seconds. This is a non-blocking timeout which holds #
# the user in a 'connecting' state until the lookup is complete. #
# The bind value indicates which IP to bind outbound requests to. #
+# nolookupprefix: If on, the idents of users being in a connect class #
+# with ident lookups disabled (i.e. <connect useident="off">) will be #
+# prefixed with a "~". If off, the ident of those users will not be #
+# prefixed. Default is off. #
#
-#<ident timeout="5">
+#<ident timeout="5" nolookupprefix="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite exception module: Adds support for channel invite exceptions
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
-# user from changing their nick again.
+# user from changing their nick again until unlocked.
# This module is oper-only.
# To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks.
#<module name="m_nicklock.so">
#<operlog tosnomask="off">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper prefixing module: Gives server operators a prefix status
-# character on all channels they are in.
+# Oper prefixing module: Adds a channel prefix mode +y which is given
+# to all IRC operators automatically on all channels they are in.
+# This prefix mode is more powerful than channel op and other regular
+# prefix modes.
+#
+# Load this module if you want all your IRC operators to have channel
+# operator powers.
#<module name="m_operprefix.so">
#
# You may additionally customise the prefix character.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for TRE regular expressions.
# This is the same regular expression engine used by UnrealIRCd, so
-# if you are most familiar with the syntax of /spamfilter from there,
+# if you are most familiar with the syntax of /SPAMFILTER from there,
# this is the provider you want. You need libtre installed in order
# to compile and load this module.
#<module name="m_regex_tre.so">
# Remove module: Adds the /REMOVE command which is a peaceful
# alternative to /KICK.
#<module name="m_remove.so">
+#
+# supportnokicks: If true, /REMOVE is not allowed on channels where the
+# nokicks (+Q) mode is set. Defaults to false.
+# protectedrank: Members having this rank or above may not be /REMOVE'd
+# by anyone. Set to 0 to disable this feature. Defaults to 50000.
+#<remove supportnokicks="true" protectedrank="50000">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# A module to block, kick or ban upon similiar messages being uttered several times.
# Sethost module: Adds the /SETHOST command.
# This module is oper-only.
# To use, SETHOST must be in one of your oper class blocks.
-# See m_chghost for how to customise valid chars for hostnames
+# See m_chghost for how to customise valid chars for hostnames.
#<module name="m_sethost.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# scripts to validate users. For this to work, one of m_ssl_gnutls.so
# or m_ssl_openssl.so must be loaded. This module also adds the
# "* <user> is using a secure connection" whois line, the ability for
-# opers to use SSL fingerprints to verify their identity and the
+# opers to use SSL cert fingerprints to verify their identity and the
# ability to force opers to use SSL connections in order to oper up.
# It is highly recommended to load this module if you use SSL on your
# network.