#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Describes the Server Administrator's real name, nick #
-# and email address. #
+# Describes the Server Administrator's real name (optionally), #
+# nick, and email address. #
# #
# Syntax is as follows: #
# <admin name="real name" #
# You should also include a flood="x" line which indicates #
# the number of lines a user may place into their buffer at once #
# before they are disconnected for excess flood. This feature can #
-# not be disabled, however it can be set to exremely high values, #
+# not be disabled, however it can be set to extremely high values, #
# rendering it effectively disabled. A recommended value is 10. #
# A counter is maintained for each user which is reset every #
# 'threshold' seconds and specifying this threshold value with #
# The optional recvq value is the maximum size which users in this #
# group may grow their receive queue to. This is recommended to be #
# kept pretty low compared to the sendq, as users will always #
-# recieve more than they send in normal circumstances. The default #
+# receive more than they send in normal circumstances. The default #
# if not specified is 4096. #
# #
# IMPORTANT NOTE, CALL THE CONFUSION POLICE! #
# what commands. Class names are case sensitive, #
# seperate multiple class names with spaces. #
# #
-# host - optional hostmask operators will recieve on oper-up. #
+# host - optional hostmask operators will receive on oper-up. #
# #
# Syntax is as follows: #
# #
# is not loaded, this configuration option has no #
# effect and will be ignored. #
# #
-# type - Sefines the kind of operator. This must match a type #
+# type - Defines the kind of operator. This must match a type #
# tag you defined above, and is case sensitive. #
# #
# Syntax is as follows: #
# new TS values in the timestamp. If you think this #
# is just pointless noise, define the value to 0. #
# #
+# ircumsgprefix - Use undernet style message prefix for channel #
+# NOTICE and PRIVMSG adding the prefix to the line #
+# of text sent out. Eg. NOTICE @#test :@ testing #
+# vs off: NOTICE @#test :testing #
+#
# notimesync - If this value is 'yes', 'true', or '1', time #
# synchronization is disabled on this server. This #
# means any servers you are linked to will not #
nouserdns="no"
syntaxhints="no"
cyclehosts="yes"
+ ircumsgprefix="no"
announcets="yes"
notimesync="no"
allowhalfop="yes">
# commands to services, however they are not limited to just this use.#
# An alias tag requires the following values to be defined in it: #
# #
-# text - The text to detect at the start of the line, #
-# must be at the start of the line to trigger the #
-# alias. Cant contain spaces, but case insensitive #
+# text - The text to detect as the actual command line, #
+# Cant contain spaces, but case insensitive. #
+# You may have multiple aliases with the same #
+# command name (text="" value), however the first #
+# found will be executed if its format value is #
+# matched, or it has no format value. Aliases are #
+# read from the top of the file to the bottom. #
+# #
+# format - If this is defined, the parameters of the alias #
+# must match this glob pattern. For example if you #
+# want the first parameter to start with a # for #
+# the alias to be executed, set format="#*" in the #
+# alias definition. Note that the :'s which are #
+# part of IRC formatted lines will be preserved #
+# for matching of this text. This value is #
+# optional. #
+# #
# replace - The text to replace 'text' with. Usually this #
# will be "PRIVMSG ServiceName :$2-" or similar. #
# You may use the variables $1 through $9 in the #
# commands with \n. If you wish to use the ACTUAL #
# characters \ and n together in a line, you must #
# use the sequence "\\n". #
+# #
# requires - If you provide a value for 'requires' this means #
# the given nickname MUST be online for the alias #
# to successfully trigger. If they are not, then #
# the user receives a 'no such nick' 401 numeric. #
+# #
# uline - Defining this value with 'yes', 'true' or '1' #
# will ensure that the user given in 'requires' #
# must also be on a u-lined server, as well as #
# online, but not on a u-lined server, then an #
# oper-alert is sent out as this is possibly signs #
# of a user trying to impersonate a service. #
+# #
# operonly - Defining this value, with a value of 'yes', '1' #
# or true will make the alias oper only. If a non- #
# oper attempts to use the alias, it will appear #
#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $3" requires="NickServ" uline="yes">
+#
+# An example of using the format value to create an alias with two
+# different behaviours depending on the format of the parameters.
+#
+#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
+# requires="ChanServ" uline="yes">
+#
+#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
+# requires="NickServ" uline="yes">
+#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alltime module: Shows time on all connected servers at once
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block CAPS module: Blocking all-CAPS messages with cmode +P
#<module name="m_blockcaps.so">
+# #
+#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# percent - How many percent of text must be caps before text #
+# will be blocked. #
+# #
+# minlen - The minimum length a line must be for the block #
+# percent to have any effect. #
+# #
+#<blockcaps percent="95" minlen="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block colour module: Blocking colour-coded messages with cmode +c
#
#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If ypu specify the m_cloaking.so module as above, you #
+# Optional - If you specify the m_cloaking.so module as above, you #
# must define cloak keys, and optionally a cloak prefix as shown #
# below. When using cloaking, the cloak keys are MANDITORY and must #
# be included. However, if prefix is not included, it will default #
# to your networks name from the <server> tag. #
# #
-# <cloak key1="543241423" #
-# key2="5378410432" #
-# key3="1143242382" #
-# key4="9504324581" #
+# <cloak key1="0x2AF39F40" #
+# key2="0x78E10B32" #
+# key3="0x4F2D2E82" #
+# key4="0x043A4C81" #
# prefix="mynet"> #
# #
# Please note that the key values will accept any number, and should #
# be large numbers. Using small numbers such as "7" or "1924" will #
-# seriously weaken the security of your cloak. #
+# seriously weaken the security of your cloak. It is recommended you #
+# use hexdecimal numbers prefixed by "0x", as shown in this example, #
+# with each key eight hex digits long. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Lusers: Shows the LUSERS output on connect
# Devoice Module: Let users devoice themselves.
#<module name="m_devoice.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DNS Blacklist Module: Provides support for looking up IPs on one or #
+# more blacklists. #
+#<module name="m_dnsbl.so"> #
+# #
+# For configuration options please see the wiki page for m_dnsbl at #
+# http://inspircd.org/wiki/DNS_Blacklist_Module #
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides glob-based message filtering
#<module name="m_filter.so">
# Knock module: adds the /KNOCK command and +K channel mode
#<module name="m_knock.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
+# used to temporarily close/open for new connections to the server. #
+# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
+# are specified in a <class> tag that the oper is part of. This is so #
+# you can control who has access to this possible dangerous command. #
+# If your server is locked and you got disconnected, do a REHASH from #
+# shell to open up again.
+#<module name="m_lockserv.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Msg flood module: Adds message/notice flood protection (+f)
#<module name="m_messageflood.so">
# features to silence based on invites, channel messages, etc.
#<module name="m_silence_ext.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLite3 module: Allows other SQL modules to access SQLite3 #
+# databases through a unified API. You must link the source for this #
+# module from the directory src/modules/extra to src/modules, plus #
+# the file m_sqlv2.h #
+#<module name="m_sqlite3.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_sqlite.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module #
+#
+#<database hostname="/full/path/to/database.db" id="anytext">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLutils module: Provides some utilities to SQL client modules, such
# as mapping queries to users and channels. You must copy the source
<exception host="*@ircop.host.com" reason="Opers hostname">
+#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This optional tag allows you to specify how wide a gline, eline, #
+# kline, zline or qline can be before it is forbidden from being #
+# set. By setting hostmasks="yes", you can allow all G, K, E lines, #
+# no matter how many users the ban would cover. This is not #
+# recommended! By setting ipmasks="yes", you can allow all Z lines, #
+# no matter how many users these cover too. Needless to say we #
+# don't recommend you do this, or, set nickmasks="yes", which will #
+# allow any qline. #
+# #
+# The trigger value indicates how wide any mask will be before it is #
+# prevented from being set. The default value is 95.5% if this tag is #
+# not defined in your configuration file, meaning that if your #
+# network has 1000 users, a gline matching over 955 of them will be #
+# prevented from being added. #
+# #
+# Please note that remote servers (and services) are exempt from #
+# these restrictions and expected to enforce their own policies #
+# locally! #
+# #
+
+<insane hostmasks="no" ipmasks="no" nickmasks="no" trigger="95.5">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# You should already know what to do here :) #
projects / user / henk / code / inspircd.git / blobdiff