# This is an example of the config file for InspIRCd. #
# Change the options to suit your network #
# #
-# Last updated on : 03 Feb 2007 #
+# $Id$
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# #
# <server name="server.name" #
# description="Server Description" #
+# networkemail="Email address shown on g/k/z/q lines" #
# network="MyNetwork"> #
# #
<server name="penguin.omega.org.za"
description="Waddle World"
- network="Omega">
+ network="Omega">
#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
<connect allow="*"
timeout="60"
- flood="20"
- threshold="1"
- pingfreq="120"
- sendq="262144"
- recvq="8192"
- localmax="3"
- globalmax="3">
+ flood="20"
+ threshold="1"
+ pingfreq="120"
+ sendq="262144"
+ recvq="8192"
+ localmax="3"
+ globalmax="3">
<connect deny="69.254.*">
<connect deny="3ffe::0/32">
# configurtion directory. #
# #
-<files motd="inspircd.motd"
- rules="inspircd.rules">
+<files motd="inspircd.motd.example"
+ rules="inspircd.rules.example">
#-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define your DNS server address here. InspIRCd has its own resolver. #
-# If you do not define this value, the first dns server from your #
-# /etc/resolv.conf file is read. If no entries are found in this file #
-# or the file cannot be opened, the default value '127.0.0.1' is used #
-# instead. The timeout value is in seconds. #
+# If you do not define this value, then then InspIRCd will attempt to #
+# determine your DNS server from your operating system. On POSIX #
+# platforms, InspIRCd will read /etc/resolv.conf, and populate this #
+# value with the first DNS server address found. On Windows platforms #
+# InspIRCd will check the registry, and use the DNS server of the #
+# first active network interface, if one exists. #
+# If a DNS server cannot be determined from these checks, the default #
+# value '127.0.0.1' is used instead. The timeout value is in seconds. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# +b, as it may break some features in popular #
# clients such as mIRC. #
# #
+# quietbursts - When synching or splitting from the network, a #
+# server can generate a lot of connect and quit #
+# snotices to the +C and +Q snomasks. Setting this #
+# value to yes squelches those messages, which can #
+# make them more useful for opers, however it will #
+# degrade their use by certain third party programs #
+# such as BOPM which rely on them to scan users when #
+# a split heals in certain configurations. #
+# #
+# pingwarning - This should be set to a number between 1 and 59 if #
+# defined, and if it is defined will cause the server#
+# to send out a warning via snomask +l if a server #
+# does not answer to PING after this many seconds. #
+# This can be useful for finding servers which are #
+# at risk of pinging out due to network issues. #
+# #
+# exemptchanops - This option allows channel operators to be exempted#
+# from certain channel modes. #
+# Supported modes are +SfgNc. Defaults to off. #
+# #
+# defaultmodes - The default modes to be given to each channel on #
+# creation. Defaults to 'nt'. There should be no + #
+# or - symbols in this sequence, if you add them #
+# they will be ignored. You may add parameters for #
+# parameterised modes. #
+# #
+# moronbanner - The NOTICE to show to users who are glined, zlined #
+# klined or qlined when they are disconnected. This #
+# is totally freeform, you may place any text here #
+# you wish. #
+# #
<options prefixquit="Quit: "
loglevel="default"
noservices="no"
qaprefixes="no"
deprotectself="no"
- deprotectothers="no"
+ deprotectothers="no"
somaxconn="128"
softlimit="12800"
userstats="Pu"
cyclehosts="yes"
ircumsgprefix="no"
announcets="yes"
- disablehmac="no"
+ disablehmac="no"
hostintopic="yes"
- hidemodes="eI"
- allowhalfop="yes">
+ hidemodes="eI"
+ quietbursts="yes"
+ pingwarning="15"
+ allowhalfop="yes"
+ defaultmodes="nt"
+ moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
+ exemptchanops="">
#-#-#-#-#-#-#-#-#-#-#-#-#-#- TIME SYNC OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#
# Time sychronization options for m_spanningtree linking. #
# Auditorium module: Adds channel mode +u which makes everyone else
# except you in the channel invisible, used for large meetings etc.
#<module name="m_auditorium.so">
+#
+# Auditorium settings:
+#
+#<auditorium showops="no">
+#
+# Setting this value to yes makes m_auditorium behave like unrealircd
+# +u channel mode, e.g. ops see users joining, parting, etc, and users
+# joining the channel see the ops. Without this flag, the mode acts
+# like ircnet's +a (anonymous channels), showing only the user in the
+# names list, and not even showing the ops in the list, or showing the
+# ops that the user has joined.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban except module: Adds support for channel ban exceptions (+e)
# Chanprotect module: gives +q and +a channel modes
#<module name="m_chanprotect.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Check module: gives /check
+# Check is useful for looking up information on channels,
+# users, IP addresses and hosts.
+#<module name="m_check.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGHOST module: Adds the /CHGHOST command
#<module name="m_chghost.so">
#
#<autojoin channel="#one,#two,#three">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Lusers: Shows the LUSERS output on connect
-#<module name="m_conn_lusers.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Usermodes: Set modes on users when they connect
# When this module is loaded <connect:allow> tags may have an optional
# #
#<waitpong sendsnotice="yes" killonbadreply="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel cycle module. Server side /hop, with +ilk etc bypass.
+#<module name="m_cycle.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connection throttle module. Configuration:
#<module name="m_connflood.so">
# Optional - If you choose to use the m_hostchange.so module. #
# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
# #
-#<host suffix="polarbears.org">
+#<host suffix="polarbears.org" separator="." prefix="">
#<hostchange mask="*@fbi.gov" action="addnick">
#<hostchange mask="*r00t@*" action="suffix">
#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
# specify the timeout for ident lookups here. If not defined, it will #
# default to one second. This is a non-blocking timeout which holds #
# the user in a 'connecting' state until the lookup is complete. #
+# The bind value indicates which IP to bind outbound requests to. #
# #
-#<ident timeout="5">
+#<ident timeout="5" bind=""> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite except module: Adds support for channel invite exceptions (+I)
# Redirect module: Adds channel redirection (mode +L)
#<module name="m_redirect.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Registered users only channel creation
+# Allows only registered users and opers to create new channels.
+#<module name="m_regonlycreate.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remove module: Adds the /REMOVE command which is a peaceful
# alternative to /KICK
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SILENCE module: Adds support for /SILENCE
#<module name="m_silence.so">
+#
+# Configuration tags:
+#
+#<silence maxentries="32">
+#
+# Sets the maximum number of entries on a users silence list.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Extended SILENCE module: Adds support for /SILENCE with additional
# features to silence based on invites, channel messages, etc.
#<module name="m_silence_ext.so">
+#
+# The configuration tags for this module are identical to those of
+# m_silence, shown above.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# users a /GLINE or /ZLINE etc would match.
#<module name="m_tline.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# UHNAMES support module: Adds support for the IRCX style UHNAMES
+# extension, which displays ident and hostname in the names list for
+# each user, saving clients from doing a WHO on the channel. Note that
+# this module is not widely supported yet. If a client does not support
+# UHNAMES it will not enable it, this will not break incompatible
+# clients.
+#<module name="m_uhnames.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Uninvite module: Adds the /UNINVITE command which lets users remove
# pending invites from channels without waiting for the user to join.
# Watch module: Adds the WATCH command, which is used by clients to
# maintain notify lists.
#<module name="m_watch.so">
+#
+# Configuration tags:
+#
+#<watch maxentries="32">
+#
+# Sets the maximum number of entries on a user's watch list.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# XMLSocket module: Adds support for connections using the shockwave
+# flash XMLSocket. Note that this does not work if the client you are
+# using has retarded ideas of the IRC protocol. Your client must still
+# send RFC-correct lines to the server, this module only changes the
+# line ending from newlines to null terminators.
+#
+#<module name="m_xmlsocket.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ZipLinks module: Adds support for zlib deflate on server to server
# #
# You should already know what to do here :) #
-<die value="User error. Insert new user and press any key.">
+<die value="User error. Insert new user and press any key. (you didn't edit your config properly.)">
#########################################################################