# |___/ #
# #
##################################||####################################
- #||#
+ #||#
##################################||####################################
# #
# This is an example of the config file for InspIRCd. #
# Change the options to suit your network #
# #
-# Last updated on : 09/01/2006 #
+# Last updated on : 04/09/2006 #
# Written by : CC (cc@backchat.co.za) #
# Updated by : katsklaw (katsklaw@gmail.com) #
# Updated by : brain (brain@inspircd.org) #
# something new or different to this version and you SHOULD READ IT. #
# #
########################################################################
-
+# #
+# Unalphabeticalise the modules list at your own risk #
+# #
+########################################################################
#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
# #
# Enter the port and address bindings here. #
# #
-# bind address - specifies which the address which ports bind #
-# port - opens an unused port #
+# bind address - specifies which address ports bind to. Leaving this #
+# field blank binds the port to all IPs available. #
+# #
+# port - The port number to bind to. You may specify a port #
+# range here, e.g. "6667-6669,7000,7001". If you do #
+# this, the server will count each port within your #
+# range as a seperate binding, making the above #
+# example equivalent to five seperate bind tags. #
+# A failure on one port in the range does not prevent #
+# the entire range from being bound, just that one #
+# port number. #
+# #
# type - can be 'clients' or 'servers'. The clients type is #
# a standard tcp based socket, the servers type is a #
# also a TCP based connection but of a different #
-# format. #
+# format. SSL support is provided by modules, to #
+# enable SSL support, please read the module section #
+# of this configuration file. #
+# #
+# ssl - When using m_ssl_gnutls.so or m_ssl_openssl.so #
+# modules, you must define this value to use ssl on #
+# that port. valid values are 'gnutls' or 'openssl' #
+# respectively. If the module is not loaded, this #
+# setting is ignored. #
+# #
+# transport - If you have m_spanningtree.so loaded, along with #
+# either of the SSL modules (m_ssl_gnutls or #
+# m_ssl_openssl) or m_ziplinks.so, then you may make #
+# use of this value. #
+# setting it to 'openssl' or 'gnutls' or 'zip' #
+# indicates that the port should accept connections #
+# using the given transport name. Transports are #
+# layers which sit on top of a socket and change the #
+# way data is sent and received, e.g. encryption, #
+# compression, and other such things. Because this #
+# may not be limited in use to just encryption, #
+# the 'ssl' value used for client ports does not #
+# exist for servers, and this value is used instead. #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# #
# Syntax is as follows: #
# #
-# <bind address="ip number" port="port" type="clients"> #
-# <bind address="ip number" port="port" type="servers"> #
+# <bind address="ip address" port="port" type="clients"> #
+# <bind address="ip address" port="port" type="servers"> #
# #
+# If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, #
+# then you must specify your IPV6 clients in the following form: #
+# ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 address to bind the #
+# port on. If InspIRCd is built for IPV4 connections (this is the #
+# default) then you do not need to prefix your addresses like this. #
+# #
+
+<bind address="" port="6000" type="clients">
+<bind address="" port="6660-6669" type="clients" ssl="gnutls">
+
+# When linking servers, the openssl and gnutls transports are largely
+# link-compatible and can be used alongside each other or either/or
+# on each end of the link without any significant issues.
-<bind address="" port="6660" type="clients">
-<bind address="" port="7000" type="servers">
-<bind address="" port="7001" type="servers">
+<bind address="" port="7000,7001" type="servers">
+<bind address="1.2.3.4" port="7005" type="servers" transport="openssl">
#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
# slash (/) in which case it is treated as an absolute path. #
# #
# Syntax is as follows: #
-# <include file="file.conf"> #
+#<include file="file.conf"> #
# #
#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# <connect allow="ip mask" timeout="blah" flood="5"> #
# <connect allow="ip mask" threshold="8" pingfreq="120"> #
# <connect allow="ip mask" sendq="99999" revcq="696969"> #
-# <connect allow="ip mask" maxlocal="3" maxglobal="3"> #
+# <connect allow="ip mask" localmax="3" globalmax="3"> #
# <connect deny="ip mask"> #
# #
+# IP masks may be specified in CIDR format or wildcard format, #
+# for IPV4 and IPV6. #
+# #
# You may optionally include timeout="x" on any allow line, which #
# specifies the amount of time given before an unknown connection #
# is closed if USER/NICK/PASS are not given. This value is in secs #
# #
# You should also include a flood="x" line which indicates #
# the number of lines a user may place into their buffer at once #
-# before they are disconnected for excess flood. The default is to #
-# DISABLE this feature. A recommended value is 10. A counter is #
-# maintained for each user which is reset every 'threshold' seconds #
-# and specifying this threshold value with threshold="X" indicates #
-# how often the counter is reset. For example, with flood="5" and #
-# threshold="8", the user may not send more than 5 lines in 8 secs. #
+# before they are disconnected for excess flood. This feature can #
+# not be disabled, however it can be set to exremely high values, #
+# rendering it effectively disabled. A recommended value is 10. #
+# A counter is maintained for each user which is reset every #
+# 'threshold' seconds and specifying this threshold value with #
+# threshold="X" indicates how often the counter is reset. For #
+# example, with flood="5" and threshold="8", the user may not send #
+# more than 5 lines in 8 secs. #
# #
# You may optionally specify the sendq size and ping frequency of #
# each connect:allow line using the pingfreq="X" and sendq="X" #
# that of the user... Just to clear up any confusion or complaints #
# that these are backwards :p #
# #
-# The maxlocal and maxglobal values can be used to enforce local #
+# The localmax and globalmax values can be used to enforce local #
# and global session limits on connections. The session limits are #
# counted against all users, but applied only to users within the #
# class. For example, if you had a class 'A' which has a session #
# #
<connect allow="196.12.*" password="secret">
-<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096" maxlocal="3" maxglobal="3">
+<connect allow="*" timeout="60" flood="20" threshold="1" pingfreq="120" sendq="262144" recvq="8192" localmax="3" globalmax="3">
<connect deny="69.254.*">
+<connect deny="3ffe::0/32">
#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
# You can create your own named classes, if you want, in fact that #
# is the whole idea of this system! #
# #
+# Note: It is possible to make a class which covers all available #
+# commands. To do this, specify commands="*". This is not really #
+# recommended, as it negates the whole purpose of the class system, #
+# however it is provided for fast configuration (e.g. in test nets) #
+# #
-<class name="Shutdown" commands="DIE RESTART REHASH">
-<class name="ServerLink" commands="CONNECT SQUIT">
+<class name="Shutdown" commands="DIE RESTART REHASH LOADMODULE UNLOADMODULE RELOAD">
+<class name="ServerLink" commands="CONNECT SQUIT RCONNECT MKPASSWD MKSHA256">
<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE">
-<class name="OperChat" commands="WALLOPS GLOBOPS">
-<class name="HostCloak" commands="SETHOST SETIDENT SETNAME">
+<class name="OperChat" commands="WALLOPS GLOBOPS SETIDLE SPYLIST SPYNAMES">
+<class name="HostCloak" commands="SETHOST SETIDENT SETNAME CHGHOST CHGIDENT">
#-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-#
# This works alongside with the classes specified above. #
# #
# type name - a name for the combined class types #
+# a type name cannot contain spaces, however if you #
+# put an _ symbol in the name, it will be translated #
+# to a space when displayed in a WHOIS. #
# #
# classes - specified above, used for flexibility for the #
# server admin to decide on which operators get #
-# what commands #
+# what commands. Class names are case sensitive, #
+# seperate multiple class names with spaces. #
# #
# host - optional hostmask operators will recieve on oper-up. #
# #
# Syntax is as follows: #
# #
-# <type name="name" classes="class name" host="oper hostmask"> #
+# <type name="name" classes="class names" host="oper hostmask"> #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# Opers are defined here. This is a very important section. #
# Remember to only make operators out of truthworthy people. #
# #
-# name - oper name, best to use lower-case #
-# #
-# password - password to oper-up, #
-# encryption not supported by inspircd. However, there #
-# are modules that allow for oper password encryption. #
-# #
-# host - host of client allowed to oper-up. #
-# wildcards accepted, seperate multiple hosts with space #
-# #
-# type - specified above, defines the kind of operator #
+# name - oper name, This is case sensitive, so it is best to #
+# use lower-case. #
+# #
+# password - password to oper-up, also case sensitive. #
+# encryption is supported via modules. You may load #
+# modules for MD5 or SHA256 encryption, and if you do, #
+# this value will be a hash value, otherwise put a #
+# plaintext password in this value. #
+# #
+# host - hosts of client allowed to oper-up. #
+# wildcards accepted, seperate multiple hosts with a #
+# space. You may also specify CIDR ip addresses. #
+# #
+# fingerprint - When using the m_ssl_oper_cert.so module, you may #
+# specify a key fingerprint here. This can be obtained #
+# using the /fingerprint command whilst the module is #
+# loaded, or from the notice given to you when you #
+# connect to the ircd using a client certificate, #
+# and will lock this oper block to only the user who #
+# has that specific key/certificate pair. #
+# This enhances security a great deal, however it #
+# requires that opers use clients which can send ssl #
+# client certificates, if this is configured for that #
+# oper. Note that if the m_ssl_oper.so module is not #
+# loaded, and/or one of m_ssl_openssl or m_ssl_gnutls #
+# is not loaded, this configuration option has no #
+# effect and will be ignored. #
+# #
+# type - Sefines the kind of operator. This must match a type #
+# tag you defined above, and is case sensitive. #
# #
# Syntax is as follows: #
# <oper name="login" #
# password="pass" #
# host="hostmask@of.oper" #
+# fingerprint="hexsequence" #
# type="oper type"> #
# #
<oper name="katsklaw"
password="s3cret"
- host="*@server.com ident@dialup15.isp.com *@localhost"
+ host="ident@dialup15.isp.com *@localhost *@server.com *@3ffe::0/16"
+ fingerprint="a41d730937a53b79f788c0ab13e9e1d5"
type="NetAdmin">
# server may create outbound links to. #
# #
# name - The name is the canocial name of the server, does #
-# not have to resolve - but it is expected to be sent #
+# not have to resolve - but it is expected to be set #
# in the remote servers connection info. #
-# ipaddr - Valid host or ip address for remote server. * #
+# #
+# ipaddr - Valid host or ip address for remote server. These #
+# hosts are resolved on rehash, and cached, if you #
+# specify a hostname, so if you find that your server #
+# is still trying to connect to an old IP after you #
+# have updated your dns, try rehashing and then #
+# attempting the connect again. #
# #
# port - The TCP port for the remote server. #
# #
# autoconnect - Sets the server to autoconnect. Where x is the num. #
# (optional) of seconds between attempts. e.g. 300 = 5 minutes. #
# #
-# encryptionkey - Encryption key to be used for AES encryption, where #
-# supported. Links using the spanning tree protocol #
-# support AES. The encryption key must be EXACTLY 8, #
-# 16 or 32 characters in length for a 64, 128 or 256 #
-# bit key, respectively. #
+# transport - If defined, this is a transport name implemented by #
+# another module. Transports are layers on top of #
+# plaintext connections, which alter them in certain #
+# ways. Currently the three supported transports are #
+# 'openssl' and 'gnutls' which are types of SSL #
+# encryption, and 'zip' which is for compression. #
+# If you define a transport, both ends of the #
+# connection must use a compatible transport for the #
+# link to succeed. OpenSSL and GnuTLS are link- #
+# compatible with each other. #
# #
# hidden - When using m_spanningtree.so for linking. you may #
# set this to 'yes', and if you do, the IP address/ #
# UNLESS the connection fails (e.g. due to a bad #
# password or servername) #
# #
+# allowmask - When this is defined, it indicates a range of IP #
+# addresses to allow for this link (You may use CIDR #
+# or wildcard form for this address). #
+# e.g. if your server is going to connect to you from #
+# the range 1.2.3.1 through 1.2.3.255, put 1.2.3.0/24 #
+# into this value. If it is not defined, then only #
+# the ipaddr field of the server shall be allowed. #
+# #
+# failover - If you define this option, it must be the name of a #
+# different link tag in your configuration. This #
+# option causes the ircd to attempt a connection to #
+# the failover link in the event that the connection #
+# to this server fails. For example, you could define #
+# two hub uplinks to a leaf server, and set an #
+# american server to autoconnect, with a european #
+# hub as its failover. In this situation, your ircd #
+# will only try the link to the european hub if the #
+# american hub is unreachable. NOTE that for the #
+# intents and purposes of this option, an unreachable #
+# server is one which DOES NOT ANSWER THE CONNECTION. #
+# If the server answers the connection with accept(), #
+# EVEN IF THE CREDENTIALS ARE INVALID, the failover #
+# link will not be tried! Failover settings will also #
+# apply to autoconnected servers as well as manually #
+# connected ones. #
+# #
+# timeout - If this is defined, then outbound connections will #
+# time out if they are not connected within this many #
+# seconds. If this is not defined, the default of ten #
+# seconds is used. #
+# #
# to u:line a server (give it extra privilages required for running #
# services, Q, etc) you must include the <uline server> tag as shown #
# in the example below. You can have as many of these as you like. #
# that server to operoverride modes. This should only be used for #
# services and protected oper servers! #
# #
-# IMPORTANT NOTE: When specifying the ip address and/or host, the #
-# server software will prioritize RESOLVED hostnames above ip #
-# addresses, so for example if your target server resolves to a.b.com #
-# you MUST put a.b.com into your link block, and NOT the IP address #
-# of a.b.com. The system uses reverse resolution. #
+# NOTE: If you have built InspIRCd with IPV6 support, and you want #
+# to link to an IPV4 server, you must specify the IP address in the #
+# form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
+# server. If you have built InspIRCd for IPV4 (this is the default) #
+# you should not prefix your IP addresses in this fashion. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# information on how to load this module! If you do not load this #
# module, server links will NOT work! #
# #
+# Also, if you define any transports, you must load the modules for #
+# these transports BEFORE you load m_spanningtree, e.g. place them #
+# above it in the configuration file. Currently this means the three #
+# modules m_ssl_gnutls, m_ziplinks and m_ssl_openssl, depending on #
+# which you choose to use. #
+# #
<link name="hub.penguin.org"
ipaddr="penguin.box.com"
port="7000"
+ allowmask="69.58.44.0/24"
autoconnect="300"
+ failover="hub.other.net"
+ timeout="15"
+ transport="gnutls"
sendpass="outgoing!password"
recvpass="incoming!password">
<link name="services.antarctic.com"
ipaddr="localhost"
port="7000"
+ allowmask="127.0.0.0/8"
sendpass="penguins"
recvpass="polarbears">
#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# These options let you define the path to your motd and rules #
-# files. #
+# files. If these are relative paths, they are relative to the #
+# configurtion directory. #
# #
-<files motd="/home/cc/inspircd/conf/inspire.motd"
- rules="/home/cc/inspircd/conf/inspire.rules">
+<files motd="inspircd.motd"
+ rules="inspircd.rules">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Define your DNS server address here. InspIRCd has its own resolver #
-# and you must define this otherwise nobody's host will resolve. The #
-# timeout value is in seconds. #
+# Define your DNS server address here. InspIRCd has its own resolver. #
+# If you do not define this value, the first dns server from your #
+# /etc/resolv.conf file is read. If no entries are found in this file #
+# or the file cannot be opened, the default value '127.0.0.1' is used #
+# instead. The timeout value is in seconds. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# resolving even though the DNS server appears to be up! Most ISP and #
# hosting provider DNS servers support recursive lookups. #
# #
+# NOTE: If you have built InspIRCd with IPV6 support, and you want #
+# to use an IPV4 nameserver, you must specify the IP address in the #
+# form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
+# server. If you have built InspIRCd for IPV4 (this is the default) #
+# you should not prefix your IP addresses in this fashion. #
+# #
+# IF YOUR RESOLV.CONF CONTAINS ONLY IPV4 ADDRESSES, AND YOU ARE USING #
+# IPV6, YOU MUST DEFINE THE <DNS SERVER> TAG, AND USE THE ::FFFF #
+# PREFIX NOTATION. IF YOU DO NOT, HOSTS WILL *NOT* RESOLVE. #
+# #
<dns server="127.0.0.1" timeout="5">
+# An example of using IPV4 nameservers over IPV6
+#<dns server="::ffff:127.0.0.1" timeout="5">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define the path to the PID file here. The PID file can be used to #
# rehash the ircd from the shell or to terminate the ircd from the #
# shell using shell scripts, perl scripts etc, and to monitor the #
-# ircd's state via cron jobs. #
+# ircd's state via cron jobs. If this is a relative path, it will be #
+# relative to the configuration directory, and if it is not defined, #
+# the default of 'inspircd.pid' is used. #
# #
-<pid file="/path/to/inspircd.pid">
+#<pid file="/path/to/inspircd.pid">
#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
# so for example disabling NICK will not cripple your network. #
# #
-# <disabled commands="TOPIC MODE"> #
-# #
+
+#<disabled commands="TOPIC MODE">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# loglevel - specifies what detail of messages to log in the #
# log file. You may select from debug, verbose, #
# default, sparse and none. #
+# #
# allowhalfop - allows the +h channel mode #
# #
# noservices - If noservices is true, yes, or 1, then the first #
# only useful on networks running the m_chanprotect #
# module without services. #
# #
+# qaprefixes - If qaprefixes is true, yes, or 1, then users #
+# with +q or +a will get the ~ or & prefixes #
+# used in unreal. This is only useful on networks #
+# running the m_chanprotect module #
+# #
+# deprotectself - If this value is set to yes, true, or 1, then any #
+# user with +q or +a may remove the +q or +a from #
+# themselves. The default setting is to not enable #
+# this feature, which stops even the founder taking #
+# away their founder status without using services. #
+# #
+# cyclehosts - If this is set to true, yes or 1, then when a #
+# user's hostname changes, they will appear to quit #
+# and then rejoin with their new host. This prevents #
+# clients from being confused by host changes, #
+# especially in the case of bots, and it is #
+# recommended that this option is enabled. #
+# #
# netbuffersize - size of the buffer used to receive data from #
# clients. The ircd may only read() this amount #
# of text in one go at any time. (OPTIONAL) #
# if defined sets a soft maxconnections value, has #
# to be less than the ./configure maxclients #
# #
-# operonlystats - The operonlystats field is optional and specifies #
-# which stats characters in /STATS may only be #
-# requested by an IRC operator. Stats characters in #
-# this field are case sensitive and enforced as #
-# oper-only independent of if they are in a module #
-# or the core. #
+# userstats - The userstats field is optional and specifies #
+# which stats characters in /STATS may be requested #
+# by non-operators. Stats characters in this field #
+# are case sensitive and are allowed to users #
+# independent of if they are in a module or the core #
+# #
+# operspywhois - If this is set then when an IRC operator uses #
+# /WHOIS on a user they will see all channels, even #
+# ones if channels are secret (+s), private (+p) or #
+# if the target user is invisible +i. #
# #
# customversion - If you specify this configuration item, and it is #
# not set to an empty value, then when a user does #
# instead of the server names in the quit message, #
# identical to the way IRCu displays them. #
# #
+# hidebans - When set to 'yes', will hide gline, kline, zline #
+# and qline quit messages from non-opers. For #
+# example, user A who is not an oper will just see #
+# (G-Lined) while user B who is an oper will see the #
+# text (G-Lined: Reason here) instead. #
+# #
# hidewhois - When defined with a non-empty value, the given #
# text will be used in place of the user's server #
# in WHOIS, when a user is WHOISed by a non-oper. #
# opers. Please be aware that this will also hide #
# any leaf servers of a U-lined server, e.g. jupes. #
# #
+# nouserdns - If set to 'yes', 'true' or '1', no user dns #
+# lookups will be performed for connecting users. #
+# this can save a lot of resources on very busy irc #
+# servers. #
+# #
+# syntaxhints - If set to 'yes', 'true' or '1', when a user does #
+# not give enough parameters for a command, a syntax #
+# hint will be given (using the RPL_TEXT numeric) #
+# as well as the standard ERR_NEEDMOREPARAMS. #
+# #
+# announcets - If this value is defined to 'yes', 'true' or '1', #
+# then if a channel's timestamp is updated the users #
+# on the channel will be informed of the change via #
+# a server notice to the channel with the old and #
+# new TS values in the timestamp. If you think this #
+# is just pointless noise, define the value to 0. #
+# #
+# ircumsgprefix - Use undernet style message prefix for channel #
+# NOTICE and PRIVMSG adding the prefix to the line #
+# of text sent out. Eg. NOTICE @#test :@ testing #
+# vs off: NOTICE @#test :testing #
+#
+# notimesync - If this value is 'yes', 'true', or '1', time #
+# synchronization is disabled on this server. This #
+# means any servers you are linked to will not #
+# automatically synchronize time with you, and in #
+# most cases will just result in more bounced modes #
+# on netsplits. This option should be the same on #
+# all servers. #
+# #
<options prefixquit="Quit: "
loglevel="default"
netbuffersize="10240"
maxwho="128"
- noservices="0"
+ noservices="no"
+ qaprefixes="no"
+ deprotectself="no"
somaxconn="128"
- softlimit="128"
- operonlystats="oclgkz"
+ softlimit="12800"
+ userstats="Pu"
+ operspywhois="no"
customversion=""
maxtargets="20"
- hidesplits="no"
- hidewhois=""
- flatlinks="no"
- hideulines="no"
+ hidesplits="no"
+ hidebans="no"
+ hidewhois=""
+ flatlinks="no"
+ hideulines="no"
+ nouserdns="no"
+ syntaxhints="no"
+ cyclehosts="yes"
+ ircumsgprefix="no"
+ announcets="yes"
+ notimesync="no"
allowhalfop="yes">
+#-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This tag lets you define the behaviour of the /whowas command of #
+# your server. #
+# #
+# groupsize - Controls the maximum entries per nick shown when #
+# performing a /whowas nick. Setting this to 0 dis- #
+# ables whowas completely. #
+# #
+# maxgroups - The maximum number of nickgroups that can be added #
+# to the list. If max is reached, oldest group will #
+# be deleted first like a FIFO. A groupsize of 3 and #
+# a maxgroups of 5000 will allow for 5000 nicks to #
+# be stored with a history of 3, thus giving a total #
+# of 3 * 5000 = 15000 entries. A setting of 0 dis- #
+# ables whowas completely. #
+# #
+# maxkeep - The maximum time a nick is kept in the whowas list #
+# before being pruned. Time may be specified in #
+# seconds, or in the following format: 1y2w3d4h5m6s #
+# meaning one year, two weeks, three days, 4 hours, #
+# 5 minutes and 6 seconds. All fields in this format #
+# are optional. Minimum is 1 hour, if less InspIRCd #
+# will default back to 1 hour. #
+# #
+#<whowas groupsize="10" #
+# maxgroups="100000" #
+# maxkeep="3d"> #
#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
# each modules link for any additional conf tags they require. #
# #
-# WINDOWS USERS PLEASE NOTE: You can still load these modules! They #
-# are incorporated into the executable and can be loaded and removed #
-# similarly to if they were in a ramdisk. #
+# You may use wildcards in a <module> tag to load all modules which #
+# match a glob pattern (e.g. m_sa????.so would load m_sajoin, #
+# m_sapart, m_saquit and m_sanick) #
+# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
#
#<module name="m_spanningtree.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MD5 Module - Allows other modules to generate MD5 hashes, usually for
+# cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_cloaking.so and m_opermd5.so may rely on
+# this module being loaded to function.
+#
+#<module name="m_md5.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SHA256 Module - Allows other modules to generate SHA256 hashes,
+# usually for cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_opermd5.so may rely on this module being
+# loaded to function.
+#
+#<module name="m_sha256.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alias module: Allows you to define server-side command aliases
#<module name="m_alias.so">
# #
# If you have the m_alias.so module loaded, you may also define #
# aliases as shown below. They are commonly used to provide shortcut #
-# commands to services, however they are not limited to jsut this use.#
+# commands to services, however they are not limited to just this use.#
# An alias tag requires the following values to be defined in it: #
# #
-# text - The text to detect at the start of the line, #
-# must be at the start of the line to trigger the #
-# alias. May contain spaces, but case insensitive. #
+# text - The text to detect as the actual command line, #
+# Cant contain spaces, but case insensitive. #
+# You may have multiple aliases with the same #
+# command name (text="" value), however the first #
+# found will be executed if its format value is #
+# matched, or it has no format value. Aliases are #
+# read from the top of the file to the bottom. #
+# #
+# format - If this is defined, the parameters of the alias #
+# must match this glob pattern. For example if you #
+# want the first parameter to start with a # for #
+# the alias to be executed, set format="#*" in the #
+# alias definition. Note that the :'s which are #
+# part of IRC formatted lines will be preserved #
+# for matching of this text. This value is #
+# optional. #
+# #
# replace - The text to replace 'text' with. Usually this #
-# will be "PRIVMSG ServiceName" or similar. #
+# will be "PRIVMSG ServiceName :$2-" or similar. #
+# You may use the variables $1 through $9 in the #
+# replace string, which refer to the first through #
+# ninth word in the original string typed by the #
+# user. You may also use $1- through $9- which #
+# refer to the first word onwards, through to the #
+# ninth word onwards, e.g. if the user types the #
+# command "foo bar baz qux quz" then $3- will hold #
+# "baz qux quz" and $2 will contain "bar". You may #
+# also use the special variables: $nick, $ident, #
+# $host and $vhost, and you may seperate multiple #
+# commands with \n. If you wish to use the ACTUAL #
+# characters \ and n together in a line, you must #
+# use the sequence "\\n". #
+# #
# requires - If you provide a value for 'requires' this means #
# the given nickname MUST be online for the alias #
# to successfully trigger. If they are not, then #
# the user receives a 'no such nick' 401 numeric. #
+# #
# uline - Defining this value with 'yes', 'true' or '1' #
# will ensure that the user given in 'requires' #
# must also be on a u-lined server, as well as #
# oper-alert is sent out as this is possibly signs #
# of a user trying to impersonate a service. #
# #
-#<alias text="NICKSERV" replace="PRIVMSG NickServ" requires="NickServ" uline="yes">
-#<alias text="CHANSERV" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes">
-#<alias text="NS" replace="PRIVMSG NickServ" requires="NickServ" uline="yes">
-#<alias text="CS" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes">
+# operonly - Defining this value, with a value of 'yes', '1' #
+# or true will make the alias oper only. If a non- #
+# oper attempts to use the alias, it will appear #
+# to not exist. #
+# #
+#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
+#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
+#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
+#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
+#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#
+# An example of using the format value to create an alias with two
+# different behaviours depending on the format of the parameters.
+#
+#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
+# requires="ChanServ" uline="yes">
+#
+#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
+# requires="NickServ" uline="yes">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alltime module: Shows time on all connected servers at once
+#<module name="m_alltime.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibear security module: Prevents 'bear.txt' based trojans from
+# connecting to your network by sending them a numeric they can't handle.
+#<module name="m_antibear.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Antibottler module: Labels bottler leech bots
# Ban except module: Adds support for channel ban exceptions (+e)
#<module name="m_banexception.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block amsg module: Attempt to block all usage of /amsg and /ame
+#<module name="m_blockamsg.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_blockamsg.so module loaded, you can configure it #
+# with the <blockamsg> tag: #
+# #
+# delay - How many seconds between two messages to force #
+# them to be recognised as unrelated. #
+# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
+# or 'killopers'. Define how to take action when #
+# a user uses /amsg or /ame. #
+#
+#<blockamsg delay="3" action="killopers">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block CAPS module: Blocking all-CAPS messages with cmode +P
+#<module name="m_blockcaps.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block colour module: Blocking colour-coded messages with cmode +c
#<module name="m_blockcolor.so">
#
#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_censor module, then specfiy #
-# below the path to the censor.conf file. See also: #
-# Censor file, see http://www.inspircd.org/wiki/Censor_Module #
+# Optional - If you specify to use the m_censor module, then you must #
+# specify some censor tags. See also: #
+# http://www.inspircd.org/wiki/Censor_Module #
#
-#<censor file="/path/to/censor.conf">
+#<include file="censor.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel filter module: Allows channel-op defined message
#<module name="m_chgident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Cloaking module: Adds usermode +x and cloaking support
+# Cloaking module: Adds usermode +x and cloaking support.
+# Relies on the module m_md5.so being loaded before m_cloaking.so in
+# the configuration file.
#<module name="m_cloaking.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify the m_cloaking.so module as above, you #
+# must define cloak keys, and optionally a cloak prefix as shown #
+# below. When using cloaking, the cloak keys are MANDITORY and must #
+# be included. However, if prefix is not included, it will default #
+# to your networks name from the <server> tag. #
+# #
+# <cloak key1="543241423" #
+# key2="5378410432" #
+# key3="1143242382" #
+# key4="9504324581" #
+# prefix="mynet"> #
+# #
+# Please note that the key values will accept any number, and should #
+# be large numbers. Using small numbers such as "7" or "1924" will #
+# seriously weaken the security of your cloak. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Lusers: Shows the LUSERS output on connect
#<module name="m_conn_lusers.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Usermodes: Set modes on users when they connect
+# When this module is loaded <connect:allow> tags may have an optional
+# modes="" value, which contains modes to add or remove from users
+# when they connect to the server.
+#<module name="m_conn_umodes.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Wait-for-Pong: Don't let a user connect until they PONG
#<module name="m_conn_waitpong.so">
# If you have the m_conn_waitpong.so module loaded, configure it with #
# the <waitpong> tag: #
# #
-# sendsnotice - Whether to send a snotice on connect, like Unreal#
+# sendsnotice - Whether to send a snotice on connect, like other #
+# older ircds #
+# #
# killonbadreply - Whether to kill the user if they send the wrong #
# PONG reply. #
-#
+# #
#<waitpong sendsnotice="yes" killonbadreply="yes">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connection throttle module. Configuration:
+#<module name="m_connflood.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# seconds, maxconns - Amount of connections per <seconds>.
+#
+# timeout - Time to wait after the throttle was activated
+# before deactivating it. Be aware that the time
+# is seconds + timeout.
+#
+# quitmsg - The message that users get if they attempt to
+# connect while the throttle is active.
+#
+# bootwait - Amount of time to wait before enforcing the
+# throttling when the server just booted.
+#
+#<connflood seconds="30" maxconns="3" timeout="30"
+# quitmsg="Throttled" bootwait="10">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DCCALLOW module: Adds the /DCCALLOW command
+#<module name="m_dccallow.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# blockchat - Whether to block DCC CHAT as well as DCC SEND
+# length - Default duration of entries in DCCALLOW list
+# action - Default action to take if no action is specified
+# can be 'block' or 'allow'
+#
+# File configuration:
+# pattern - The glob pattern to match against
+# action - Action to take if a user attempts to send a file
+# that matches this pattern, can be 'block' or 'allow'
+#
+#<dccallow blockchat="yes" length="5m" action="block">
+#<banfile pattern="*.exe" action="block">
+#<banfile pattern="*.txt" action="allow">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deaf module: adds support for ircu style usermode +d - deaf to
+# channel messages and channel notices.
+#<module name="m_deaf.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny Channels: Deny Channels from being used by users
#<module name="m_denychans.so">
#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
# #
# If you have the m_denychans.so module loaded, you need to specify #
-# the channels to deny:
+# the channels to deny: #
# #
# name - The channel name to deny. #
+# #
# allowopers - If operators are allowed to override the deny. #
+# #
# reason - Reason given for the deny. #
-#
+# #
#<badchan name="#gods" allowopers="yes" reason="Tortoises!">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides glob-based message filtering
#<module name="m_filter.so">
-#OR
+# OR
# PCRE filter module: Filters messages using regular expressions
#<module name="m_filter_pcre.so">
#
+# You may only use one or the other with these modules, network-wide.
+#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_filter or m_filter_pcre #
-# modules, then specfiy below the path to the filter.conf file. #
-#
-#<filter file="/path/to/inspircd/filter.conf">
+# modules, then specfiy below the path to the filter.conf file, #
+# or define some <filter> tags. #
+# #
+#<include file="filter.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Foobar module - does nothing - historical relic
+# Foobar module: does nothing - historical relic
#<module name="m_foobar.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_helpop.so module, then #
-# specify below the path to the helpop.conf file. #
-#
-#<helpop file="/path/to/inspircd/helpop.conf">
+# specify below the path to the helpop.conf file, or if you like to #
+# make a mess, define your helpop tags in this conf. #
+# #
+#<include file="helpop.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDECHANS module: Allows opers to hide their channels list from non-
+# opers by setting user mode +I on themselves.
+# <module name="m_hidechans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDEOPER module: Allows opers to hide their oper status from non-
+# opers by setting user mode +H on themselves.
+# <module name="m_hideoper.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hostchange module: Allows a different style of cloaking
# #
# Optional - If you choose to use the m_hostchange.so module. #
# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
-#
+# #
#<host suffix="polarbears.org">
#<hostchange mask="*@fbi.gov" action="addnick">
#<hostchange mask="*r00t@*" action="suffix">
#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# httpd module: Provides http server support for InspIRCd
+#<module name="m_httpd.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# Optional - If you choose to use the m_httpd.so module, then you must
+# specify the port number and other details of your http server:
+#
+#<http ip="192.168.1.10" host="brainwave" port="32006"
+# index="/home/brain/inspircd/http/index.html">
+#
+# You may have as many of these tags as you wish, each with a different
+# IP, port, host or index file. Each one will act as an independent
+# HTTP server.
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http stats module: Provides basic stats pages over HTTP
+# Requires m_httpd.so to be loaded for it to function.
+#<module name="m_httpd_stats.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+#
+#<httpstats stylesheet="http://remote.style/sheet.css">
+#
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ident: Provides RFC 1413 ident lookup support
#<module name="m_ident.so">
# specify the timeout for ident lookups here. If not defined, it will #
# default to one second. This is a non-blocking timeout which holds #
# the user in a 'connecting' state until the lookup is complete. #
-#
+# #
#<ident timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Msg flood module: Adds message/notice flood protection (+f)
#<module name="m_messageflood.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MySQL module: Allows other SQL modules to access MySQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_mysql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_mysql.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# NAMESX module: Provides support for the NAMESX extension which allows
+# clients to see all the prefixes set on a user without getting confused.
+# This is supported by mIRC, x-chat, klient, and maybe more.
+#<module name="m_namesx.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
-# user from changing their nick again. /NICKLOCK and /NICKUNLOCK
+# user from changing their nick again.
#<module name="m_nicklock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper channels mode: Adds the +O channel mode
#<module name="m_operchans.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper hash module: Allows hashed oper passwords
+# Relies on the module m_md5.so and/or m_sha256.so being loaded before
+# m_oper_hash.so in the configuration file.
+#<module name="m_oper_hash.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# To use this module, you must define a hash type for each oper's
+# password you want to hash. For example:
+#
+# <oper name="katsklaw"
+# host="ident@dialup15.isp.com"
+# hash="sha256"
+# password="a41d730937a53b79f788c0ab13e9e1d5"
+# type="NetAdmin">
+#
+# The types of hashing available vary depending on which hashing modules
+# you load, but usually if you load m_sha256.so and m_md5.so, both md5
+# and sha256 type hashing will be available (the most secure of which
+# is SHA256).
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper Join module: Forces opers to join a channel on oper-up
#<module name="m_operjoin.so">
#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you are using the m_operjoin.so module, specify the channel here #
-#
+# #
#<operjoin channel="#channel">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# If you are using the m_opermotd.so module, specify the motd here #
-#
-#<opermotd file="/path/to/oper.motd">
+# #
+#<opermotd file="oper.motd">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override
# Specify the level as the 'level' parameter of the <type> tag
#<module name="m_operlevels.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MD5 module: Allows MD5 hashed oper passwords
-#<module name="m_opermd5.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper SHA256 module: Allows SHA256 hashed oper passwords
-# This module is in src/modules/extra
-#<module name="m_opersha256.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper modes module: Allows you to specify modes to add/remove on oper
# Specify the modes as the 'modes' parameter of the <type> tag
#<module name="m_opermodes.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Parking module: Adds parking support and /PARK and /UNPARK
-#<module name="m_park.so">
+# PostgreSQL module: Allows other SQL modules to access PgSQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_pgsql.so">
#
-#-#-#-#-#-#-#-#-#-#-#-# PARK CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_park.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/User_Parking_Module #
+# m_pgsql.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Random Quote module: provides a random quote on connect
+# Random Quote module: provides a random quote on connect.
+# NOTE: Some of these may mimic fatal errors and confuse users and
+# opers alike! - BEWARE!
#<module name="m_randquote.so">
#
#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_randquote.so module, then #
# specify below the path to the randquotes.conf file. #
-#
-#<randquote file="/path/to/inspircd/randquotes.conf">
+# #
+#<randquote file="randquotes.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Redirect module: Adds channel redirection (mode +L)
# alternative to /KICK
#<module name="m_remove.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restrict banned users module:
+# Disallows banned users on a channel from messaging the channel,
+# changing nick, or changing the topic, if loaded.
+#<module name="m_restrictbanned.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restricted channels module: Allows only opers to create channels
#<module name="m_restrictchans.so">
# Restrict message module: Allows users to only message opers
#<module name="m_restrictmsg.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Provide /LIST throttling (to prevent flooding) and /LIST safety to
+# prevent excess flood when the list is large.
+#<module name="m_safelist.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command
#<module name="m_sajoin.so">
# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
#<module name="m_saquit.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-
+# Secure list module: Prevent /LIST in the first minute of connection,
+# crippling most spambots and trojan spreader bots.
+#<module name="m_securelist.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set Idle module: Adds a command for opers to change their
# idle time (mainly a toy)
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via user mode +r, which
+# is similar to the DALnet and dreamforge systems.
#<module name="m_services.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via account names (AC)
+# and is similar in operation to the way asuka and ircu handle services.
+# it cannot be used at the same time as m_services, above.
+#<module name="m_services_account.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Sethost module: Adds the /SETHOST command
#<module name="m_sethost.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Show Whois module: Adds the +W usermode which allows opers
-# to see when they are whois'ed
+# to see when they are whois'ed (can be annoying).
#<module name="m_showwhois.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Spy module: Adds the commands SPYLIST and SPYNAMES that let opers
# see who is in a +s channel, and list +s channels, show keys of keyed
# channels the oper is not a member of etc. (standard 'abusive' features
-# of unrealircd, modulized here in InspIRCd).
+# of many other ircds, modulized here in InspIRCd).
#<module name="m_spy.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# does not do anything useful without a working SSL module (see below)
#<module name="m_sslmodes.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Dummy ssl module: If you have other servers on your network which
+# have SSL, but your server does not have ssl enabled, you should load
+# this module, which will handle SSL metadata (e.g. the "Is using ssl"
+# field in the WHOIS information).
+#<module name="m_ssl_dummy.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
# if enabled. You must copy the source for this module from the directory
# #
# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
+# #
+# NOTE: If you want to use this module to encrypt and sign your #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file! #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL Info module: Allows users to retrieve information about other
+# user's peer SSL certificates and keys. This can be used by client
+# scripts to validate users. For this to work, one of m_ssl_gnutls.so
+# or m_ssl_openssl.so must be loaded. You must symlink the source for
+# this module from the directory src/modules/extra.
+#<module name="m_sslinfo.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
# #
# m_ssl_openssl.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
+# #
+# NOTE: If you want to use this module to encrypt and sign your #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file! #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
+# stored within their SSL certificate and key pair.
+# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
+# be loaded. An extra value should be added to enabled opers, which
+# is in the following format: fingerprint="<hash>". For more information,
+# see the example in the oper blocks.
+#<module name="m_ssl_oper_cert.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip colour module: Adds the channel mode +S
#<module name="m_silence.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL module: Allows other SQL modules to access SQL databases
-# through a unified API. You must copy the source for this module
-# from the directory src/modules/extra
-#<module name="m_sql.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_sql.so is more complex than described here, see the wiki for more:#
-# http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
-#
-#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="1">
+# Extended SILENCE module: Adds support for /SILENCE with additional
+# features to silence based on invites, channel messages, etc.
+#<module name="m_silence_ext.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLutils module: Provides some utilities to SQL client modules, such
+# as mapping queries to users and channels. You must copy the source
+# for this module from the directory src/modules/extra/m_sqlutils.cpp
+# and src/modules/extra/m_sqlutils.h into /src/modules
+# Needed for, and loaded before: SQLauth and SQLoper
+#<module name="m_sqlutils.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL authentication module: Allows IRCd connections to be tied into
# a database table (for example a forum). You must copy the source for
# this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
#<module name="m_sqlauth.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL oper module: Allows you to store oper credentials in an SQL table
# You must copy the source for this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
#<module name="m_sqloper.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# Timed bans module: Adds timed bans and the /TBAN command
#<module name="m_timedbans.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test line module: Adds the /TLINE command, used to test how many
+# users a /GLINE or /ZLINE etc would match.
+#<module name="m_tline.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Uninvite module: Adds the /UNINVITE command which lets users remove
+# pending invites from channels without waiting for the user to join.
+#<module name="m_uninvite.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Userip module: Adds the /USERIP command
#<module name="m_userip.so">
# maintain notify lists.
#<module name="m_watch.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# ZipLinks module: Adds support for zlib deflate on server to server
+# connections. Both ends of the connection must load this module.
+#
+#<module name="m_ziplink.so">
+#
+# To use this module, you must enable it as a transport type in your
+# <link> tags or <bind> tags using the transport name 'zip'.
+# See the documentation of <link> and <bind>, respectively.
+#
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# The ban tags define nick masks, host masks and ip ranges which are #
# badip lines ban an ip range (same as a zline) #
# #
# ipmask - The ip range to ban (wildcards possible) #
+# CIDR is supported in the IP mask. #
# reason - Reason to display when disconnected #
# #
# badnick lines ban a nick mask (same as a qline) #
# badhost lines ban a user@host mask (same as a kline) #
# #
# host - ident@hostname (wildcards possible) #
+# If you specify an IP, CIDR is supported. #
# reason - Reason to display on disconnection #
# #
# exception lines define a hostmask that is excempt from [kzg]lines #
# #
# host - ident@hostname (wildcards possible) #
+# If you specify an IP, CIDR is supported. #
# reason - Reason, shown only in /stats e #
# #
<badhost host="*@hundredz.n.hundredz.o.1337.kiddies.com" reason="Too many 1337 kiddiots">
<badhost host="*@localhost" reason="No irc from localhost!">
+<badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
<exception host="*@ircop.host.com" reason="Opers hostname">
+#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This optional tag allows you to specify how wide a gline, eline, #
+# kline, zline or qline can be before it is forbidden from being #
+# set. By setting hostmasks="yes", you can allow all G, K, E lines, #
+# no matter how many users the ban would cover. This is not #
+# recommended! By setting ipmasks="yes", you can allow all Z lines, #
+# no matter how many users these cover too. Needless to say we #
+# don't recommend you do this, or, set nickmasks="yes", which will #
+# allow any qline. #
+# #
+# The trigger value indicates how wide any mask will be before it is #
+# prevented from being set. The default value is 95.5% if this tag is #
+# not defined in your configuration file, meaning that if your #
+# network has 1000 users, a gline matching over 955 of them will be #
+# prevented from being added. #
+# #
+# Please note that remote servers (and services) are exempt from #
+# these restrictions and expected to enforce their own policies #
+# locally! #
+# #
+
+<insane hostmasks="no" ipmasks="no" nickmasks="no" trigger="95.5">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# You should already know what to do here :) #
-<die value="You should probably edit your config *PROPERLY* and try again.">
+<die value="No, i wasnt joking. You should probably edit your config *PROPERLY* and try again.">
#########################################################################