# something new or different to this version and you SHOULD READ IT. #
# #
########################################################################
-
+# #
+# Unalphabeticalise the modules list at your own risk #
+# #
+########################################################################
#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
# #
# Enter the port and address bindings here. #
# #
-# bind address - specifies which the address which ports bind #
-# port - opens an unused port #
+# bind address - specifies which the address which ports bind. #
+# may be a hostname or an IP address. Resolution of #
+# hostnames may block for up to one second per IP #
+# as port binding occurs before the socket engine is #
+# initialized and therefore nonblocking DNS is not #
+# available at this point until startup is complete. #
+# port - The port number to bind to #
# type - can be 'clients' or 'servers'. The clients type is #
# a standard tcp based socket, the servers type is a #
# also a TCP based connection but of a different #
# #
# Syntax is as follows: #
# #
-# <bind address="ip number" port="port" type="clients"> #
-# <bind address="ip number" port="port" type="servers"> #
+# <bind address="ip or host" port="port" type="clients"> #
+# <bind address="ip or host" port="port" type="servers"> #
# #
<bind address="" port="6660" type="clients">
# #
# You should also include a flood="x" line which indicates #
# the number of lines a user may place into their buffer at once #
-# before they are disconnected for excess flood. The default is to #
-# DISABLE this feature. A recommended value is 10. A counter is #
-# maintained for each user which is reset every 'threshold' seconds #
-# and specifying this threshold value with threshold="X" indicates #
-# how often the counter is reset. For example, with flood="5" and #
-# threshold="8", the user may not send more than 5 lines in 8 secs. #
+# before they are disconnected for excess flood. This feature can #
+# not be disabled, however it can be set to exremely high values, #
+# rendering it effectively disabled. A recommended value is 10. #
+# A counter is maintained for each user which is reset every #
+# 'threshold' seconds and specifying this threshold value with #
+# threshold="X" indicates how often the counter is reset. For #
+# example, with flood="5" and threshold="8", the user may not send #
+# more than 5 lines in 8 secs. #
# #
# You may optionally specify the sendq size and ping frequency of #
# each connect:allow line using the pingfreq="X" and sendq="X" #
# that of the user... Just to clear up any confusion or complaints #
# that these are backwards :p #
# #
-# The maxlocal and maxglobal values can be used to enforce local #
+# The localmax and globalmax values can be used to enforce local #
# and global session limits on connections. The session limits are #
# counted against all users, but applied only to users within the #
# class. For example, if you had a class 'A' which has a session #
# #
<connect allow="196.12.*" password="secret">
-<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096" maxlocal="3" maxglobal="3">
+<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096" localmax="3" globalmax="3">
<connect deny="69.254.*">
# are modules that allow for oper password encryption. #
# #
# host - host of client allowed to oper-up. #
-# wildcards accepted #
+# wildcards accepted, seperate multiple hosts with space #
# #
# type - specified above, defines the kind of operator #
# #
<oper name="katsklaw"
password="s3cret"
- host="*@*"
+ host="ident@dialup15.isp.com *@localhost *@server.com"
type="NetAdmin">
# files. #
# #
-<files motd="/home/cc/inspircd/conf/inspire.motd"
- rules="/home/cc/inspircd/conf/inspire.rules">
+<files motd="/home/cc/inspircd/conf/inspircd.motd"
+ rules="/home/cc/inspircd/conf/inspircd.rules">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Define your DNS server address here. InspIRCd has its own resolver #
-# and you must define this otherwise nobody's host will resolve. The #
-# timeout value is in seconds. #
+# Define your DNS server address here. InspIRCd has its own resolver. #
+# If you do not define this value, the first dns server from your #
+# /etc/resolv.conf file is read. If no entries are found in this file #
+# or the file cannot be opened, the default value '127.0.0.1' is used #
+# instead. The timeout value is in seconds. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# socket engine/dns engine names. You may use this #
# to enhance security, or simply for vanity. #
# #
-# maxtargets - The maxtargets field is optional, and if not #
+# maxtargets - The maxtargets field is optional, and if not #
# defined, defaults to 20. It indicates the maximum #
# number of targets which may be given to commands #
# such as PRIVMSG, KICK etc. #
# #
-
+# hidesplits - When set to 'yes', will hide split server names #
+# from non-opers. Non-opers will see '*.net *.split' #
+# instead of the server names in the quit message, #
+# identical to the way IRCu displays them. #
+# #
+# hidebans - When set to 'yes', will hide gline, kline, zline #
+# and qline quit messages from non-opers. For #
+# example, user A who is not an oper will just see #
+# (G-Lined) while user B who is an oper will see the #
+# text (G-Lined: Reason here) instead. #
+# #
+# hidewhois - When defined with a non-empty value, the given #
+# text will be used in place of the user's server #
+# in WHOIS, when a user is WHOISed by a non-oper. #
+# For example, most nets will want to set this to #
+# something like '*.netname.net' to conceal the #
+# actual server the user is on. #
+# #
+# flatlinks - When you are using m_spanningtree.so, and this #
+# value is set to true, yes or 1, /MAP and /LINKS #
+# will be flattened when shown to a non-oper. #
+# #
+# hideulines - When you are using m_spanningtree.so, and this #
+# value is set to true, yes or 1, then U-lined #
+# servers will be hidden in /LINKS and /MAP. For non #
+# opers. Please be aware that this will also hide #
+# any leaf servers of a U-lined server, e.g. jupes. #
+# #
+# tempdir - If defined, indicates a path where modules will be #
+# temporarily copied before loading. If not defined, #
+# defaults to /tmp. #
+# #
<options prefixquit="Quit: "
loglevel="default"
operonlystats="oclgkz"
customversion=""
maxtargets="20"
+ hidesplits="no"
+ hidebans="no"
+ hidewhois=""
+ flatlinks="no"
+ hideulines="no"
allowhalfop="yes">
#<module name="m_spanningtree.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Foobar module - does nothing
-#<module name="m_foobar.so">
+# Alias module: Allows you to define server-side command aliases
+#<module name="m_alias.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_alias.so module loaded, you may also define #
+# aliases as shown below. They are commonly used to provide shortcut #
+# commands to services, however they are not limited to jsut this use.#
+# An alias tag requires the following values to be defined in it: #
+# #
+# text - The text to detect at the start of the line, #
+# must be at the start of the line to trigger the #
+# alias. Cant contain spaces, but case insensitive #
+# replace - The text to replace 'text' with. Usually this #
+# will be "PRIVMSG ServiceName" or similar. #
+# requires - If you provide a value for 'requires' this means #
+# the given nickname MUST be online for the alias #
+# to successfully trigger. If they are not, then #
+# the user receives a 'no such nick' 401 numeric. #
+# uline - Defining this value with 'yes', 'true' or '1' #
+# will ensure that the user given in 'requires' #
+# must also be on a u-lined server, as well as #
+# actually being on the network. If the user is #
+# online, but not on a u-lined server, then an #
+# oper-alert is sent out as this is possibly signs #
+# of a user trying to impersonate a service. #
+# #
+#<alias text="NICKSERV" replace="PRIVMSG NickServ" requires="NickServ" uline="yes">
+#<alias text="CHANSERV" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes">
+#<alias text="NS" replace="PRIVMSG NickServ" requires="NickServ" uline="yes">
+#<alias text="CS" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Chanprotect module: gives +q and +a channel modes
-#<module name="m_chanprotect.so">
+# Antibear security module: Prevents 'bear.txt' based trojans from
+# connecting to your network by sending them a numeric they can't handle.
+#<module name="m_antibear.txt">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Globops module: gives /GLOBOPS and usermode +g
-#<module name="m_globops.so">
+# Antibottler module: Labels bottler leech bots
+#<module name="m_antibottler.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Noinvite module: Gives channel mode +V
-#<module name="m_noinvite.so">
+# Ban except module: Adds support for channel ban exceptions (+e)
+#<module name="m_banexception.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MD5 module: Allows MD5 hashed oper passwords
-#<module name="m_opermd5.so">
+# Block amsg module: Attempt to block all usage of /amsg and /ame
+#<module name="m_blockamsg.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_blockamsg.so module loaded, you can configure it #
+# with the <blockamsg> tag: #
+# #
+# delay - How many seconds between two messages to force #
+# them to be recognised as unrelated. #
+# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
+# or 'killopers'. Define how to take action when #
+# a user uses /amsg or /ame. #
+#
+#<blockamsg delay="3" action="killopers">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels
-#<module name="m_restrictchans.so">
+# Block CAPS module: Blocking all-CAPS messages with cmode +P
+#<module name="m_blockcaps.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Deny Channels: Deny Channels from being used by users
-#<module name="m_denychans.so">
+# Block colour module: Blocking colour-coded messages with cmode +c
+#<module name="m_blockcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Services support module: Adds several usermodes such as +R and +M
-#<module name="m_services.so">
+# Botmode module: Adds the user mode +B
+#<module name="m_botmode.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Userip module: Adds the /USERIP command
-#<module name="m_userip.so">
+# CBAN module: Lets you disallow channels from being used at runtime.
+#<module name="m_cban.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Alias module: Allows you to define server-side command aliases
-#<module name="m_alias.so">
+# Censor module: Adds the channel mode +G
+#<module name="m_censor.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_censor module, then specfiy #
+# below the path to the censor.conf file. See also: #
+# Censor file, see http://www.inspircd.org/wiki/Censor_Module #
+#
+#<censor file="/path/to/censor.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel filter module: Allows channel-op defined message
+# filtering using simple string matches (channel mode +g)
+#<module name="m_chanfilter.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Chanprotect module: gives +q and +a channel modes
+#<module name="m_chanprotect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGHOST module: Adds the /CHGHOST command
#<module name="m_chghost.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HELPOP module: Provides the /HELPOP command
-#<module name="m_helpop.so">
+# CHGIDENT module: Adds the /CHGIDENT command
+#<module name="m_chgident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No kicks module: Adds the +Q channel mode
-#<module name="m_nokicks.so">
+# Cloaking module: Adds usermode +x and cloaking support
+#<module name="m_cloaking.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If ypu specify the m_cloaking.so module as above, you #
+# must define cloak keys, and optionally a cloak prefix as shown #
+# below. When using cloaking, the cloak keys are MANDITORY and must #
+# be included. However, if prefix is not included, it will default #
+# to your networks name from the <server> tag. #
+# #
+# <cloak key1="-543241423" #
+# key2="5378410432" #
+# key3="1143242382" #
+# key4="9504324581" #
+# prefix="mynet"> #
+# #
+# Please note that the key values will accept any number, positive #
+# or negative, and should be large numbers. Using small numbers such #
+# as "7" or "1924" will seriously weaken the security of your cloak. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MOTD module: Provides support for seperate message of the day
-# on oper-up
-#<module name="m_opermotd.so">
+# Conn-Lusers: Shows the LUSERS output on connect
+#<module name="m_conn_lusers.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict message module: Allows users to only message opers
-#<module name="m_restrictmsg.so">
+# Conn-Wait-for-Pong: Don't let a user connect until they PONG
+#<module name="m_conn_waitpong.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_conn_waitpong.so module loaded, configure it with #
+# the <waitpong> tag: #
+# #
+# sendsnotice - Whether to send a snotice on connect, like Unreal#
+# killonbadreply - Whether to kill the user if they send the wrong #
+# PONG reply. #
+#
+#<waitpong sendsnotice="yes" killonbadreply="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Sethost module: Adds the /SETHOST command
-#<module name="m_sethost.so">
+# Deny Channels: Deny Channels from being used by users
+#<module name="m_denychans.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_denychans.so module loaded, you need to specify #
+# the channels to deny:
+# #
+# name - The channel name to deny. #
+# allowopers - If operators are allowed to override the deny. #
+# reason - Reason given for the deny. #
+#
+#<badchan name="#gods" allowopers="yes" reason="Tortoises!">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Antibottler module: Labels bottler leech bots
-#<module name="m_antibottler.so">
+# Devoice Module: Let users devoice themselves.
+#<module name="m_devoice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Watch module: Adds the WATCH command, which is used by clients to
-# maintain notify lists.
-#<module name="m_watch.so">
+# Filter module: Provides glob-based message filtering
+#<module name="m_filter.so">
+#OR
+# PCRE filter module: Filters messages using regular expressions
+#<module name="m_filter_pcre.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_filter or m_filter_pcre #
+# modules, then specfiy below the path to the filter.conf file. #
+#
+#<filter file="/path/to/inspircd/filter.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Cloaking module: Adds usermode +x and cloaking support
-#<module name="m_cloaking.so">
+# Foobar module - does nothing - historical relic
+#<module name="m_foobar.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Hostchange module: Allows a different style of cloaking
-#<module name="m_hostchange.so">
+# Globops module: gives /GLOBOPS and usermode +g
+#<module name="m_globops.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No nicks module: Adds the +N channel mode
-#<module name="m_nonicks.so">
+# Global load module: Allows loading and unloading of modules network-
+# wide (USE WITH EXTREME CAUTION!)
+#<module name="m_globalload.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Override module: Adds support for oper override
-#<module name="m_override.so">
+# HELPOP module: Provides the /HELPOP command
+#<module name="m_helpop.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_helpop.so module, then #
+# specify below the path to the helpop.conf file. #
+#
+#<helpop file="/path/to/inspircd/helpop.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAJOIN module: Adds the /SAJOIN command
-#<module name="m_sajoin.so">
+# Hostchange module: Allows a different style of cloaking
+#<module name="m_hostchange.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you choose to use the m_hostchange.so module. #
+# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
+#
+#<host suffix="polarbears.org">
+#<hostchange mask="*@fbi.gov" action="addnick">
+#<hostchange mask="*r00t@*" action="suffix">
+#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Set Idle module: Adds a command for opers to change their
-# idle time (mainly a toy)
-#<module name="m_setidle.so">
+# Ident: Provides RFC 1413 ident lookup support
+#<module name="m_ident.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you are using the m_ident.so module, then you can #
+# specify the timeout for ident lookups here. If not defined, it will #
+# default to one second. This is a non-blocking timeout which holds #
+# the user in a 'connecting' state until the lookup is complete. #
+#
+#<ident timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block colour module: Adds the +c channel mode
-#<module name="m_blockcolor.so">
+# Invite except module: Adds support for channel invite exceptions (+I)
+#<module name="m_inviteexception.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Lusers: Shows the LUSERS output on connect
-#<module name="m_conn_lusers.so">
+# Join flood module: Adds support for join flood protection (+j)
+#<module name="m_joinflood.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ident: Provides RFC 1413 ident lookup support
-#<module name="m_ident.so">
+# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
+#<module name="m_kicknorejoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No Notice module: adds the channel mode +T
-#<module name="m_nonotice.so">
+# Knock module: adds the /KNOCK command and +K channel mode
+#<module name="m_knock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Parking module: Adds parking support and /PARK and /UNPARK
-#<module name="m_park.so">
+# Msg flood module: Adds message/notice flood protection (+f)
+#<module name="m_messageflood.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAMODE module: Adds the oper /SAMODE command
-#<module name="m_samode.so">
+# Nicklock module: Let opers change a user's nick and then stop that
+# user from changing their nick again. /NICKLOCK and /NICKUNLOCK
+#<module name="m_nicklock.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SETNAME module: Adds the /SETNAME command
-#<module name="m_setname.so">
+# No ctcp module: Adds the channel mode +C to block CTCPs
+#<module name="m_noctcp.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Botmode module: Adds the user mode +B
-#<module name="m_botmode.so">
+# Noinvite module: Gives channel mode +V
+#<module name="m_noinvite.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Filter module: Provides glob-based message filtering
-#<module name="m_filter.so">
+# No kicks module: Adds the +Q channel mode
+#<module name="m_nokicks.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Knock module: adds the /KNOCK command and +K channel mode
-#<module name="m_knock.so">
+# No nicks module: Adds the +N channel mode
+#<module name="m_nonicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No Notice module: adds the channel mode +T
+#<module name="m_nonotice.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper channels mode: Adds the +O channel mode
#<module name="m_operchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Random Quote module: provides a random quote on connect
-#<module name="m_randquote.so">
+# Oper Join module: Forces opers to join a channel on oper-up
+#<module name="m_operjoin.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you are using the m_operjoin.so module, specify the channel here #
+#
+#<operjoin channel="#channel">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SANICK module: Allows opers to change user's nicks
-#<module name="m_sanick.so">
+# Oper MOTD module: Provides support for seperate message of the day
+# on oper-up
+#<module name="m_opermotd.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you are using the m_opermotd.so module, specify the motd here #
+#
+#<opermotd file="/path/to/oper.motd">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Show Whois module: Adds the +W usermode which allows opers
-# to see when they are whois'ed
-#<module name="m_showwhois.so">
+# Oper WHO module: Provides a more revealing /WHO to opers
+#<module name="m_operwho.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Strip colour module: Adds the channel mode +S
-#<module name="m_stripcolor.so">
+# Override module: Adds support for oper override
+#<module name="m_override.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_override.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/Oper_Override_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Censor module: Adds the channel mode +G
-#<module name="m_censor.so">
+# Oper levels module: Gives each oper a level and prevents
+# actions being taken against higher level opers
+# Specify the level as the 'level' parameter of the <type> tag
+#<module name="m_operlevels.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Nick locking module: Adds the oper-only /NICKLOCK command
-#<module name="m_nicklock.so">
+# Oper MD5 module: Allows MD5 hashed oper passwords
+#<module name="m_opermd5.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper Join module: Forces opers to join a channel on oper-up
-#<module name="m_operjoin.so">
+# Oper SHA256 module: Allows SHA256 hashed oper passwords
+# This module is in src/modules/extra
+#<module name="m_opersha256.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper modes module: Allows you to specify modes to add/remove on oper
+# Specify the modes as the 'modes' parameter of the <type> tag
+#<module name="m_opermodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Parking module: Adds parking support and /PARK and /UNPARK
+#<module name="m_park.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-# PARK CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_park.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/User_Parking_Module #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Random Quote module: provides a random quote on connect
+#<module name="m_randquote.so">
+#
+#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_randquote.so module, then #
+# specify below the path to the randquotes.conf file. #
+#
+#<randquote file="/path/to/inspircd/randquotes.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Redirect module: Adds channel redirection (mode +L)
#<module name="m_redirect.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAPART module: Adds the oper /SAPART command
-#<module name="m_sapart.so">
+# Remove module: Adds the /REMOVE command which is a peaceful
+# alternative to /KICK
+#<module name="m_remove.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SILENCE module: Adds support for /SILENCE
-#<module name="m_silence.so">
+# Restricted channels module: Allows only opers to create channels
+#<module name="m_restrictchans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test command module: Does nothing significant
-#<module name="m_testcommand.so">
+# Restrict message module: Allows users to only message opers
+#<module name="m_restrictmsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel filter module: Allows channel-op defined message
-# filtering using simple string matches (channel mode +g)
-#<module name="m_chanfilter.so">
+# Provide /LIST throttling (to prevent flooding) and /LIST safety to
+# prevent excess flood when the list is large.
+#<module name="m_safelist.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No ctcp module: Adds the channel mode +C to block CTCPs
-#<module name="m_noctcp.so">
+# SAJOIN module: Adds the /SAJOIN command
+#<module name="m_sajoin.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper levels module: Gives each oper a level and prevents
-# actions being taken against higher level opers
-#<module name="m_operlevels.so">
+# SAMODE module: Adds the oper /SAMODE command
+#<module name="m_samode.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Remove module: Adds the /REMOVE command which is a peaceful
-# alternative to /KICK
-#<module name="m_remove.so">
+# SANICK module: Allows opers to change user's nicks
+#<module name="m_sanick.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAPART module: Adds the oper /SAPART command
+#<module name="m_sapart.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
#<module name="m_saquit.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-
+# Secure list module: Prevent /LIST in the first minute of connection,
+# crippling most spambots and trojan spreader bots.
+#<module name="m_securelist.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Timed bans module: Adds timed bans and the /TBAN command
-#<module name="m_timedbans.so">
+# Set Idle module: Adds a command for opers to change their
+# idle time (mainly a toy)
+#<module name="m_setidle.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper modes module: Allows you to specify modes to add/remove on oper
-#<module name="m_opermodes.so">
+# Services support module: Adds several usermodes such as +R and +M
+#<module name="m_services.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
-#<module name="m_swhois.so">
+# Sethost module: Adds the /SETHOST command
+#<module name="m_sethost.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban except module: Adds support for channel ban exceptions (+e)
-#<module name="m_banexception.so">
+# Setident module: Adds the /SETIDENT command
+#<module name="m_setident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Invite except module: Adds support for channel invite exceptions (+I)
-#<module name="m_inviteexception.so">
+# SETNAME module: Adds the /SETNAME command
+#<module name="m_setname.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Show Whois module: Adds the +W usermode which allows opers
+# to see when they are whois'ed
+#<module name="m_showwhois.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Spy module: Adds the commands SPYLIST and SPYNAMES that let opers
+# see who is in a +s channel, and list +s channels, show keys of keyed
+# channels the oper is not a member of etc. (standard 'abusive' features
+# of unrealircd, modulized here in InspIRCd).
+#<module name="m_spy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL channel mode module: Adds support for SSL-only channels (+z).
+# does not do anything useful without a working SSL module (see below)
+#<module name="m_sslmodes.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
# src/modules/extra, or answer 'yes' in ./configure when asked if you
# want to enable this, or it will not load.
#<module name="m_ssl_gnutls.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL channel mode module: Adds support for SSL-only channels (+z).
-# does not do anything useful without a working SSL module (see above)
-#<module name="m_sslmodes.so">
+# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
+# if enabled. You must copy the source for this module from the directory
+# src/modules/extra, or answer 'yes' in ./configure when asked if you
+# want to enable this, or it will not load.
+#<module name="m_ssl_openssl.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_ssl_openssl.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
-#<module name="m_kicknorejoin.so">
+# Strip colour module: Adds the channel mode +S
+#<module name="m_stripcolor.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SILENCE module: Adds support for /SILENCE
+#<module name="m_silence.so">
-#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL module: Allows other SQL modules to access SQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra
+#<module name="m_sql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_filter.so module, then #
-# specfiy below the path to the filter.conf file. #
+# m_sql.so is more complex than described here, see the wiki for more:#
+# http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="1">
-#<filter file="/path/to/inspircd/filter.conf">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL authentication module: Allows IRCd connections to be tied into
+# a database table (for example a forum). You must copy the source for
+# this module from the directory src/modules/extra
+#<module name="m_sqlauth.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_sqlauth.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/SQL_Authentication_Module #
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL logging module: Allows you to log network-wide data for your
+# network in a fully normalized set of SQL tables. You must copy the
+# source for this module from the directory src/modules/extra
+#<module name="m_sqllog.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# dbid - Database ID to use (see m_sql) #
+# #
+# See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
+# #
+#<sqllog dbid="1">
-#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL oper module: Allows you to store oper credentials in an SQL table
+# You must copy the source for this module from the directory src/modules/extra
+#<module name="m_sqloper.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_helpop.so module, then #
-# specify below the path to the helpop.conf file. #
+# dbid - Database ID to use (see m_sql) #
+# #
+# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
+# #
+#<sqloper dbid="1">
-<die value="If you used the helpop include above then do *NOT* use this tag.">
-#<helpop file="/path/to/inspircd/helpop.conf">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
+#<module name="m_swhois.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test command module: Does nothing significant. Read: pointless.
+#<module name="m_testcommand.so">
-#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify to use the m_randquotes.so module, then #
-# specify below the path to the randquotes.conf file. #
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Timed bans module: Adds timed bans and the /TBAN command
+#<module name="m_timedbans.so">
-#<randquote file="/path/to/inspircd/randquotes.conf">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Uninvite module: Adds the /UNINVITE command which lets users remove
+# pending invites from channels without waiting for the user to join.
+#<module name="m_uninvite.so">
-#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Userip module: Adds the /USERIP command
+#<module name="m_userip.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Vhost module: Adds the VHOST command which allows for adding virtual
+# hosts which are accessible using a username and password in the config.
+#<module name="m_vhost.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you are using the m_ident.so module, then you can #
-# specify the timeout for ident lookups here. If not defined, it will #
-# default to one second. This is a non-blocking timeout which holds #
-# the user in a 'connecting' state until the lookup is complete. #
+# user - Username for the vhost. #
+# #
+# pass - Password for the vhost. #
+# #
+# host - Vhost to set. #
+#
+#<vhost user="some_username" pass="some_password" host="some.host">
-#<ident timeout="5">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Watch module: Adds the WATCH command, which is used by clients to
+# maintain notify lists.
+#<module name="m_watch.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
<exception host="*@ircop.host.com" reason="Opers hostname">
-#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you have the m_alias.so module loaded, you may also define #
-# aliases as shown below. They are commonly used to provide shortcut #
-# commands to services, however they are not limited to jsut this use.#
-# An alias tag requires the following values to be defined in it: #
-# #
-# text - The text to detect at the start of the line, #
-# must be at the start of the line to trigger the #
-# alias. May contain spaces, but case insensitive. #
-# replace - The text to replace 'text' with. Usually this #
-# will be "PRIVMSG ServiceName" or similar. #
-# requires - If you provide a value for 'requires' this means #
-# the given nickname MUST be online for the alias #
-# to successfully trigger. If they are not, then #
-# the user receives a 'no such nick' 401 numeric. #
-# uline - Defining this value with 'yes', 'true' or '1' #
-# will ensure that the user given in 'requires' #
-# must also be on a u-lined server, as well as #
-# actually being on the network. If the user is #
-# online, but not on a u-lined server, then an #
-# oper-alert is sent out as this is possibly signs #
-# of a user trying to impersonate a service. #
-# #
-
-<alias text="NICKSERV" replace="PRIVMSG NickServ" requires="NickServ" uline="yes">
-<alias text="CHANSERV" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes">
-<alias text="NS" replace="PRIVMSG NickServ" requires="NickServ" uline="yes">
-<alias text="CS" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# You should already know what to do here :) #
projects / user / henk / code / inspircd.git / blobdiff