# bind address - specifies which address ports bind to. Leaving this #
# field blank binds the port to all IPs available. #
# #
-# port - The port number to bind to #
+# port - The port number to bind to. You may specify a port #
+# range here, e.g. "6667-6669,7000,7001". If you do #
+# this, the server will count each port within your #
+# range as a seperate binding, making the above #
+# example equivalent to five seperate bind tags. #
+# A failure on one port in the range does not prevent #
+# the entire range from being bound, just that one #
+# port number. #
# #
# type - can be 'clients' or 'servers'. The clients type is #
# a standard tcp based socket, the servers type is a #
# enable SSL support, please read the module section #
# of this configuration file. #
# #
+# ssl - When using m_ssl_gnutls.so or m_ssl_openssl.so #
+# modules, you must define this value to use ssl on #
+# that port. valid values are 'gnutls' or 'openssl' #
+# respectively. If the module is not loaded, this #
+# setting is ignored. #
+# #
+# transport - If you have m_spanningtree.so loaded, along with #
+# either of the SSL modules (m_ssl_gnutls or #
+# m_ssl_openssl) or m_ziplinks.so, then you may make #
+# use of this value. #
+# setting it to 'openssl' or 'gnutls' or 'zip' #
+# indicates that the port should accept connections #
+# using the given transport name. Transports are #
+# layers which sit on top of a socket and change the #
+# way data is sent and received, e.g. encryption, #
+# compression, and other such things. Because this #
+# may not be limited in use to just encryption, #
+# the 'ssl' value used for client ports does not #
+# exist for servers, and this value is used instead. #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# #
# Syntax is as follows: #
# #
-# <bind address="ip or host" port="port" type="clients"> #
-# <bind address="ip or host" port="port" type="servers"> #
+# <bind address="ip address" port="port" type="clients"> #
+# <bind address="ip address" port="port" type="servers"> #
# #
# If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, #
# then you must specify your IPV6 clients in the following form: #
# default) then you do not need to prefix your addresses like this. #
# #
-<bind address="" port="6660" type="clients">
-<bind address="" port="7000" type="servers">
-<bind address="" port="7001" type="servers">
+<bind address="" port="6000" type="clients">
+<bind address="" port="6660-6669" type="clients" ssl="gnutls">
+
+# When linking servers, the openssl and gnutls transports are largely
+# link-compatible and can be used alongside each other or either/or
+# on each end of the link without any significant issues.
+
+<bind address="" port="7000,7001" type="servers">
+<bind address="1.2.3.4" port="7005" type="servers" transport="openssl">
#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
# is not loaded, this configuration option has no #
# effect and will be ignored. #
# #
-# type - Sefines the kind of operator. This must match a type #
+# type - Defines the kind of operator. This must match a type #
# tag you defined above, and is case sensitive. #
# #
# Syntax is as follows: #
# autoconnect - Sets the server to autoconnect. Where x is the num. #
# (optional) of seconds between attempts. e.g. 300 = 5 minutes. #
# #
-# encryptionkey - Encryption key to be used for AES encryption, where #
-# supported. Links using the spanning tree protocol #
-# support AES. The encryption key must be EXACTLY 8, #
-# 16 or 32 characters in length for a 64, 128 or 256 #
-# bit key, respectively. #
+# transport - If defined, this is a transport name implemented by #
+# another module. Transports are layers on top of #
+# plaintext connections, which alter them in certain #
+# ways. Currently the three supported transports are #
+# 'openssl' and 'gnutls' which are types of SSL #
+# encryption, and 'zip' which is for compression. #
+# If you define a transport, both ends of the #
+# connection must use a compatible transport for the #
+# link to succeed. OpenSSL and GnuTLS are link- #
+# compatible with each other. #
# #
# hidden - When using m_spanningtree.so for linking. you may #
# set this to 'yes', and if you do, the IP address/ #
# apply to autoconnected servers as well as manually #
# connected ones. #
# #
+# timeout - If this is defined, then outbound connections will #
+# time out if they are not connected within this many #
+# seconds. If this is not defined, the default of ten #
+# seconds is used. #
+# #
# to u:line a server (give it extra privilages required for running #
# services, Q, etc) you must include the <uline server> tag as shown #
# in the example below. You can have as many of these as you like. #
# information on how to load this module! If you do not load this #
# module, server links will NOT work! #
# #
+# Also, if you define any transports, you must load the modules for #
+# these transports BEFORE you load m_spanningtree, e.g. place them #
+# above it in the configuration file. Currently this means the three #
+# modules m_ssl_gnutls, m_ziplinks and m_ssl_openssl, depending on #
+# which you choose to use. #
+# #
<link name="hub.penguin.org"
ipaddr="penguin.box.com"
allowmask="69.58.44.0/24"
autoconnect="300"
failover="hub.other.net"
+ timeout="15"
+ transport="gnutls"
sendpass="outgoing!password"
recvpass="incoming!password">
#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# These options let you define the path to your motd and rules #
-# files. These should be absolute paths. #
+# files. If these are relative paths, they are relative to the #
+# configurtion directory. #
# #
-<files motd="/home/cc/inspircd/conf/inspircd.motd"
- rules="/home/cc/inspircd/conf/inspircd.rules">
+<files motd="inspircd.motd"
+ rules="inspircd.rules">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define the path to the PID file here. The PID file can be used to #
# rehash the ircd from the shell or to terminate the ircd from the #
# shell using shell scripts, perl scripts etc, and to monitor the #
-# ircd's state via cron jobs. This is IMPORTANT and you must define #
-# it or the ircd will refuse to start. #
+# ircd's state via cron jobs. If this is a relative path, it will be #
+# relative to the configuration directory, and if it is not defined, #
+# the default of 'inspircd.pid' is used. #
# #
-<pid file="/path/to/inspircd.pid">
+
#<pid file="/path/to/inspircd.pid">
#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# used in unreal. This is only useful on networks #
# running the m_chanprotect module #
# #
+# deprotectself - If this value is set to yes, true, or 1, then any #
+# user with +q or +a may remove the +q or +a from #
+# themselves. The default setting is to not enable #
+# this feature, which stops even the founder taking #
+# away their founder status without using services. #
+# #
# cyclehosts - If this is set to true, yes or 1, then when a #
# user's hostname changes, they will appear to quit #
# and then rejoin with their new host. This prevents #
# if defined sets a soft maxconnections value, has #
# to be less than the ./configure maxclients #
# #
-# operonlystats - The operonlystats field is optional and specifies #
-# which stats characters in /STATS may only be #
-# requested by an IRC operator. Stats characters in #
-# this field are case sensitive and enforced as #
-# oper-only independent of if they are in a module #
-# or the core. #
+# userstats - The userstats field is optional and specifies #
+# which stats characters in /STATS may be requested #
+# by non-operators. Stats characters in this field #
+# are case sensitive and are allowed to users #
+# independent of if they are in a module or the core #
# #
# operspywhois - If this is set then when an IRC operator uses #
# /WHOIS on a user they will see all channels, even #
# opers. Please be aware that this will also hide #
# any leaf servers of a U-lined server, e.g. jupes. #
# #
-# tempdir - If defined, indicates a path where modules will be #
-# temporarily copied before loading. If not defined, #
-# defaults to /tmp. #
-# #
# nouserdns - If set to 'yes', 'true' or '1', no user dns #
# lookups will be performed for connecting users. #
# this can save a lot of resources on very busy irc #
# new TS values in the timestamp. If you think this #
# is just pointless noise, define the value to 0. #
# #
+# ircumsgprefix - Use undernet style message prefix for channel #
+# NOTICE and PRIVMSG adding the prefix to the line #
+# of text sent out. Eg. NOTICE @#test :@ testing #
+# vs off: NOTICE @#test :testing #
+#
+# notimesync - If this value is 'yes', 'true', or '1', time #
+# synchronization is disabled on this server. This #
+# means any servers you are linked to will not #
+# automatically synchronize time with you, and in #
+# most cases will just result in more bounced modes #
+# on netsplits. This option should be the same on #
+# all servers. #
+# #
<options prefixquit="Quit: "
loglevel="default"
netbuffersize="10240"
maxwho="128"
- noservices="0"
- qaprefixes="0"
+ noservices="no"
+ qaprefixes="no"
+ deprotectself="no"
somaxconn="128"
- softlimit="128"
- operonlystats="oclgkz"
+ softlimit="12800"
+ userstats="Pu"
operspywhois="no"
customversion=""
maxtargets="20"
hidewhois=""
flatlinks="no"
hideulines="no"
- nouserdns="no"
- syntaxhints="no"
- cyclehosts="yes"
- announcets="yes"
+ nouserdns="no"
+ syntaxhints="no"
+ cyclehosts="yes"
+ ircumsgprefix="no"
+ announcets="yes"
+ notimesync="no"
allowhalfop="yes">
+#-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This tag lets you define the behaviour of the /whowas command of #
+# your server. #
+# #
+# groupsize - Controls the maximum entries per nick shown when #
+# performing a /whowas nick. Setting this to 0 dis- #
+# ables whowas completely. #
+# #
+# maxgroups - The maximum number of nickgroups that can be added #
+# to the list. If max is reached, oldest group will #
+# be deleted first like a FIFO. A groupsize of 3 and #
+# a maxgroups of 5000 will allow for 5000 nicks to #
+# be stored with a history of 3, thus giving a total #
+# of 3 * 5000 = 15000 entries. A setting of 0 dis- #
+# ables whowas completely. #
+# #
+# maxkeep - The maximum time a nick is kept in the whowas list #
+# before being pruned. Time may be specified in #
+# seconds, or in the following format: 1y2w3d4h5m6s #
+# meaning one year, two weeks, three days, 4 hours, #
+# 5 minutes and 6 seconds. All fields in this format #
+# are optional. Minimum is 1 hour, if less InspIRCd #
+# will default back to 1 hour. #
+# #
+#<whowas groupsize="10" #
+# maxgroups="100000" #
+# maxkeep="3d"> #
#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
# each modules link for any additional conf tags they require. #
# #
+# You may use wildcards in a <module> tag to load all modules which #
+# match a glob pattern (e.g. m_sa????.so would load m_sajoin, #
+# m_sapart, m_saquit and m_sanick) #
+# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
#
#<module name="m_spanningtree.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MD5 Module - Allows other modules to generate MD5 hashes, usually for
+# cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_cloaking.so and m_opermd5.so may rely on
+# this module being loaded to function.
+#
+#<module name="m_md5.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SHA256 Module - Allows other modules to generate SHA256 hashes,
+# usually for cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_opermd5.so may rely on this module being
+# loaded to function.
+#
+#<module name="m_sha256.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alias module: Allows you to define server-side command aliases
#<module name="m_alias.so">
# commands to services, however they are not limited to just this use.#
# An alias tag requires the following values to be defined in it: #
# #
-# text - The text to detect at the start of the line, #
-# must be at the start of the line to trigger the #
-# alias. Cant contain spaces, but case insensitive #
+# text - The text to detect as the actual command line, #
+# Cant contain spaces, but case insensitive. #
+# You may have multiple aliases with the same #
+# command name (text="" value), however the first #
+# found will be executed if its format value is #
+# matched, or it has no format value. Aliases are #
+# read from the top of the file to the bottom. #
+# #
+# format - If this is defined, the parameters of the alias #
+# must match this glob pattern. For example if you #
+# want the first parameter to start with a # for #
+# the alias to be executed, set format="#*" in the #
+# alias definition. Note that the :'s which are #
+# part of IRC formatted lines will be preserved #
+# for matching of this text. This value is #
+# optional. #
+# #
# replace - The text to replace 'text' with. Usually this #
# will be "PRIVMSG ServiceName :$2-" or similar. #
# You may use the variables $1 through $9 in the #
# commands with \n. If you wish to use the ACTUAL #
# characters \ and n together in a line, you must #
# use the sequence "\\n". #
+# #
# requires - If you provide a value for 'requires' this means #
# the given nickname MUST be online for the alias #
# to successfully trigger. If they are not, then #
# the user receives a 'no such nick' 401 numeric. #
+# #
# uline - Defining this value with 'yes', 'true' or '1' #
# will ensure that the user given in 'requires' #
# must also be on a u-lined server, as well as #
# online, but not on a u-lined server, then an #
# oper-alert is sent out as this is possibly signs #
# of a user trying to impersonate a service. #
+# #
# operonly - Defining this value, with a value of 'yes', '1' #
# or true will make the alias oper only. If a non- #
# oper attempts to use the alias, it will appear #
#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $3" requires="NickServ" uline="yes">
+#
+# An example of using the format value to create an alias with two
+# different behaviours depending on the format of the parameters.
+#
+#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
+# requires="ChanServ" uline="yes">
+#
+#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
+# requires="NickServ" uline="yes">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alltime module: Shows time on all connected servers at once
+#<module name="m_alltime.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Antibear security module: Prevents 'bear.txt' based trojans from
#
#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_censor module, then specfiy #
-# below the path to the censor.conf file. See also: #
-# Censor file, see http://www.inspircd.org/wiki/Censor_Module #
+# Optional - If you specify to use the m_censor module, then you must #
+# specify some censor tags. See also: #
+# http://www.inspircd.org/wiki/Censor_Module #
#
-#<censor file="/path/to/censor.conf">
+#<include file="censor.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel filter module: Allows channel-op defined message
#<module name="m_chgident.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Cloaking module: Adds usermode +x and cloaking support
+# Cloaking module: Adds usermode +x and cloaking support.
+# Relies on the module m_md5.so being loaded before m_cloaking.so in
+# the configuration file.
#<module name="m_cloaking.so">
#
#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If ypu specify the m_cloaking.so module as above, you #
+# Optional - If you specify the m_cloaking.so module as above, you #
# must define cloak keys, and optionally a cloak prefix as shown #
# below. When using cloaking, the cloak keys are MANDITORY and must #
# be included. However, if prefix is not included, it will default #
#<connflood seconds="30" maxconns="3" timeout="30"
# quitmsg="Throttled" bootwait="10">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DCCALLOW module: Adds the /DCCALLOW command
+#<module name="m_dccallow.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# blockchat - Whether to block DCC CHAT as well as DCC SEND
+# length - Default duration of entries in DCCALLOW list
+# action - Default action to take if no action is specified
+# can be 'block' or 'allow'
+#
+# File configuration:
+# pattern - The glob pattern to match against
+# action - Action to take if a user attempts to send a file
+# that matches this pattern, can be 'block' or 'allow'
+#
+#<dccallow blockchat="yes" length="5m" action="block">
+#<banfile pattern="*.exe" action="block">
+#<banfile pattern="*.txt" action="allow">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deaf module: adds support for ircu style usermode +d - deaf to
+# channel messages and channel notices.
+#<module name="m_deaf.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny Channels: Deny Channels from being used by users
#<module name="m_denychans.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides glob-based message filtering
#<module name="m_filter.so">
-#OR
+# OR
# PCRE filter module: Filters messages using regular expressions
#<module name="m_filter_pcre.so">
#
+# You may only use one or the other with these modules, network-wide.
+#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_filter or m_filter_pcre #
-# modules, then specfiy below the path to the filter.conf file. #
+# modules, then specfiy below the path to the filter.conf file, #
+# or define some <filter> tags. #
# #
-#<filter file="/path/to/inspircd/filter.conf">
+#<include file="filter.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Foobar module: does nothing - historical relic
#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_helpop.so module, then #
-# specify below the path to the helpop.conf file. #
+# specify below the path to the helpop.conf file, or if you like to #
+# make a mess, define your helpop tags in this conf. #
# #
-#<helpop file="/path/to/inspircd/helpop.conf">
+#<include file="helpop.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDECHANS module: Allows opers to hide their channels list from non-
+# opers by setting user mode +I on themselves.
+# <module name="m_hidechans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDEOPER module: Allows opers to hide their oper status from non-
+# opers by setting user mode +H on themselves.
+# <module name="m_hideoper.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hostchange module: Allows a different style of cloaking
# Oper channels mode: Adds the +O channel mode
#<module name="m_operchans.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper hash module: Allows hashed oper passwords
+# Relies on the module m_md5.so and/or m_sha256.so being loaded before
+# m_oper_hash.so in the configuration file.
+#<module name="m_oper_hash.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# To use this module, you must define a hash type for each oper's
+# password you want to hash. For example:
+#
+# <oper name="katsklaw"
+# host="ident@dialup15.isp.com"
+# hash="sha256"
+# password="a41d730937a53b79f788c0ab13e9e1d5"
+# type="NetAdmin">
+#
+# The types of hashing available vary depending on which hashing modules
+# you load, but usually if you load m_sha256.so and m_md5.so, both md5
+# and sha256 type hashing will be available (the most secure of which
+# is SHA256).
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper Join module: Forces opers to join a channel on oper-up
#<module name="m_operjoin.so">
# #
# If you are using the m_opermotd.so module, specify the motd here #
# #
-#<opermotd file="/path/to/oper.motd">
+#<opermotd file="oper.motd">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override
# Specify the level as the 'level' parameter of the <type> tag
#<module name="m_operlevels.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MD5 module: Allows MD5 hashed oper passwords
-#<module name="m_opermd5.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper SHA256 module: Allows SHA256 hashed oper passwords
-# This module is in src/modules/extra
-#<module name="m_opersha256.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper modes module: Allows you to specify modes to add/remove on oper
# Specify the modes as the 'modes' parameter of the <type> tag
# Optional - If you specify to use the m_randquote.so module, then #
# specify below the path to the randquotes.conf file. #
# #
-#<randquote file="/path/to/inspircd/randquotes.conf">
+#<randquote file="randquotes.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Redirect module: Adds channel redirection (mode +L)
# alternative to /KICK
#<module name="m_remove.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restrict banned users module:
+# Disallows banned users on a channel from messaging the channel,
+# changing nick, or changing the topic, if loaded.
+#<module name="m_restrictbanned.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restricted channels module: Allows only opers to create channels
#<module name="m_restrictchans.so">
# #
# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
+# #
+# NOTE: If you want to use this module to encrypt and sign your #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file! #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL Info module: Allows users to retrieve information about other
# #
# m_ssl_openssl.so is too complex it describe here, see the wiki: #
# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
+# #
+# NOTE: If you want to use this module to encrypt and sign your #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file! #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
# SILENCE module: Adds support for /SILENCE
#<module name="m_silence.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Extended SILENCE module: Adds support for /SILENCE with additional
+# features to silence based on invites, channel messages, etc.
+#<module name="m_silence_ext.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLutils module: Provides some utilities to SQL client modules, such
+# as mapping queries to users and channels. You must copy the source
+# for this module from the directory src/modules/extra/m_sqlutils.cpp
+# and src/modules/extra/m_sqlutils.h into /src/modules
+# Needed for, and loaded before: SQLauth and SQLoper
+#<module name="m_sqlutils.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL authentication module: Allows IRCd connections to be tied into
# a database table (for example a forum). You must copy the source for
# this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
#<module name="m_sqlauth.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL oper module: Allows you to store oper credentials in an SQL table
# You must copy the source for this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
#<module name="m_sqloper.so">
#
#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# maintain notify lists.
#<module name="m_watch.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# ZipLinks module: Adds support for zlib deflate on server to server
+# connections. Both ends of the connection must load this module.
+#
+#<module name="m_ziplink.so">
+#
+# To use this module, you must enable it as a transport type in your
+# <link> tags or <bind> tags using the transport name 'zip'.
+# See the documentation of <link> and <bind>, respectively.
+#
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# The ban tags define nick masks, host masks and ip ranges which are #
<exception host="*@ircop.host.com" reason="Opers hostname">
+#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This optional tag allows you to specify how wide a gline, eline, #
+# kline, zline or qline can be before it is forbidden from being #
+# set. By setting hostmasks="yes", you can allow all G, K, E lines, #
+# no matter how many users the ban would cover. This is not #
+# recommended! By setting ipmasks="yes", you can allow all Z lines, #
+# no matter how many users these cover too. Needless to say we #
+# don't recommend you do this, or, set nickmasks="yes", which will #
+# allow any qline. #
+# #
+# The trigger value indicates how wide any mask will be before it is #
+# prevented from being set. The default value is 95.5% if this tag is #
+# not defined in your configuration file, meaning that if your #
+# network has 1000 users, a gline matching over 955 of them will be #
+# prevented from being added. #
+# #
+# Please note that remote servers (and services) are exempt from #
+# these restrictions and expected to enforce their own policies #
+# locally! #
+# #
+
+<insane hostmasks="no" ipmasks="no" nickmasks="no" trigger="95.5">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# You should already know what to do here :) #
projects / user / henk / code / inspircd.git / blobdiff