# something new or different to this version and you SHOULD READ IT. #
# #
########################################################################
-
+# #
+# Unalphabeticalise the modules list at your own risk #
+# #
+########################################################################
#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
# #
# Enter the port and address bindings here. #
# #
-# bind address - specifies which the address which ports bind #
-# port - opens an unused port #
+# bind address - specifies which the address which ports bind. #
+# may be a hostname or an IP address. Resolution of #
+# hostnames may block for up to one second per IP #
+# as port binding occurs before the socket engine is #
+# initialized and therefore nonblocking DNS is not #
+# available at this point until startup is complete. #
+# port - The port number to bind to #
# type - can be 'clients' or 'servers'. The clients type is #
# a standard tcp based socket, the servers type is a #
# also a TCP based connection but of a different #
# #
# Syntax is as follows: #
# #
-# <bind address="ip number" port="port" type="clients"> #
-# <bind address="ip number" port="port" type="servers"> #
+# <bind address="ip or host" port="port" type="clients"> #
+# <bind address="ip or host" port="port" type="servers"> #
# #
<bind address="" port="6660" type="clients">
# that of the user... Just to clear up any confusion or complaints #
# that these are backwards :p #
# #
-# The maxlocal and maxglobal values can be used to enforce local #
+# The localmax and globalmax values can be used to enforce local #
# and global session limits on connections. The session limits are #
# counted against all users, but applied only to users within the #
# class. For example, if you had a class 'A' which has a session #
# #
<connect allow="196.12.*" password="secret">
-<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096" maxlocal="3" maxglobal="3">
+<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096" localmax="3" globalmax="3">
<connect deny="69.254.*">
# files. #
# #
-<files motd="/home/cc/inspircd/conf/inspire.motd"
- rules="/home/cc/inspircd/conf/inspire.rules">
+<files motd="/home/cc/inspircd/conf/inspircd.motd"
+ rules="/home/cc/inspircd/conf/inspircd.rules">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Define your DNS server address here. InspIRCd has its own resolver #
-# and you must define this otherwise nobody's host will resolve. The #
-# timeout value is in seconds. #
+# Define your DNS server address here. InspIRCd has its own resolver. #
+# If you do not define this value, the first dns server from your #
+# /etc/resolv.conf file is read. If no entries are found in this file #
+# or the file cannot be opened, the default value '127.0.0.1' is used #
+# instead. The timeout value is in seconds. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# oper-only independent of if they are in a module #
# or the core. #
# #
+# operspywhois - If this is set then when an IRC operator uses #
+# /WHOIS on a user they will see all channels, even #
+# ones if channels are secret (+s), private (+p) or #
+# if the target user is invisible +i. #
+# #
# customversion - If you specify this configuration item, and it is #
# not set to an empty value, then when a user does #
# a /VERSION command on the ircd, this string will #
# instead of the server names in the quit message, #
# identical to the way IRCu displays them. #
# #
+# hidebans - When set to 'yes', will hide gline, kline, zline #
+# and qline quit messages from non-opers. For #
+# example, user A who is not an oper will just see #
+# (G-Lined) while user B who is an oper will see the #
+# text (G-Lined: Reason here) instead. #
+# #
# hidewhois - When defined with a non-empty value, the given #
# text will be used in place of the user's server #
# in WHOIS, when a user is WHOISed by a non-oper. #
somaxconn="128"
softlimit="128"
operonlystats="oclgkz"
+ operspywhois="no"
customversion=""
maxtargets="20"
- hidesplits="no"
- hidewhois=""
- flatlinks="no"
- hideulines="no"
+ hidesplits="no"
+ hidebans="no"
+ hidewhois=""
+ flatlinks="no"
+ hideulines="no"
allowhalfop="yes">
# #
# text - The text to detect at the start of the line, #
# must be at the start of the line to trigger the #
-# alias. May contain spaces, but case insensitive. #
+# alias. Cant contain spaces, but case insensitive #
# replace - The text to replace 'text' with. Usually this #
# will be "PRIVMSG ServiceName" or similar. #
# requires - If you provide a value for 'requires' this means #
#<alias text="NS" replace="PRIVMSG NickServ" requires="NickServ" uline="yes">
#<alias text="CS" replace="PRIVMSG ChanServ" requires="ChanServ" uline="yes">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibear security module: Prevents 'bear.txt' based trojans from
+# connecting to your network by sending them a numeric they can't handle.
+#<module name="m_antibear.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Antibottler module: Labels bottler leech bots
#<module name="m_antibottler.so">
# Ban except module: Adds support for channel ban exceptions (+e)
#<module name="m_banexception.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block amsg module: Attempt to block all usage of /amsg and /ame
+#<module name="m_blockamsg.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_blockamsg.so module loaded, you can configure it #
+# with the <blockamsg> tag: #
+# #
+# delay - How many seconds between two messages to force #
+# them to be recognised as unrelated. #
+# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
+# or 'killopers'. Define how to take action when #
+# a user uses /amsg or /ame. #
+#
+#<blockamsg delay="3" action="killopers">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block CAPS module: Blocking all-CAPS messages with cmode +P
+#<module name="m_blockcaps.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block colour module: Blocking colour-coded messages with cmode +c
#<module name="m_blockcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support
#<module name="m_cloaking.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If ypu specify the m_cloaking.so module as above, you #
+# must define cloak keys, and optionally a cloak prefix as shown #
+# below. When using cloaking, the cloak keys are MANDITORY and must #
+# be included. However, if prefix is not included, it will default #
+# to your networks name from the <server> tag. #
+# #
+# <cloak key1="-543241423" #
+# key2="5378410432" #
+# key3="1143242382" #
+# key4="9504324581" #
+# prefix="mynet"> #
+# #
+# Please note that the key values will accept any number, positive #
+# or negative, and should be large numbers. Using small numbers such #
+# as "7" or "1924" will seriously weaken the security of your cloak. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Lusers: Shows the LUSERS output on connect
#
#<opermotd file="/path/to/oper.motd">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper WHO module: Provides a more revealing /WHO to opers
+#<module name="m_operwho.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override
#<module name="m_override.so">
# Restrict message module: Allows users to only message opers
#<module name="m_restrictmsg.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Provide /LIST throttling (to prevent flooding) and /LIST safety to
+# prevent excess flood when the list is large.
+#<module name="m_safelist.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command
#<module name="m_sajoin.so">
# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
#<module name="m_saquit.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-
+# Secure list module: Prevent /LIST in the first minute of connection,
+# crippling most spambots and trojan spreader bots.
+#<module name="m_securelist.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set Idle module: Adds a command for opers to change their
# idle time (mainly a toy)
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via user mode +r, which
+# is similar to the DALnet and dreamforge systems.
#<module name="m_services.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via account names (AC)
+# and is similar in operation to the way asuka and ircu handle services.
+# it cannot be used at the same time as m_services, above.
+#<module name="m_services_account.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Sethost module: Adds the /SETHOST command
#<module name="m_sethost.so">
# does not do anything useful without a working SSL module (see below)
#<module name="m_sslmodes.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Dummy ssl module: If you have other servers on your network which
+# have SSL, but your server does not have ssl enabled, you should load
+# this module, which will handle SSL metadata (e.g. the "Is using ssl"
+# field in the WHOIS information).
+#<module name="m_ssl_dummy.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
# if enabled. You must copy the source for this module from the directory