# #
# <server name="server.name" #
# description="Server Description" #
+# networkemail="Email address shown on g/k/z/q lines" #
# network="MyNetwork"> #
# #
<server name="penguin.omega.org.za"
description="Waddle World"
- network="Omega">
+ network="Omega">
#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
<connect allow="*"
timeout="60"
- flood="20"
- threshold="1"
- pingfreq="120"
- sendq="262144"
- recvq="8192"
- localmax="3"
- globalmax="3">
+ flood="20"
+ threshold="1"
+ pingfreq="120"
+ sendq="262144"
+ recvq="8192"
+ localmax="3"
+ globalmax="3">
<connect deny="69.254.*">
<connect deny="3ffe::0/32">
# link to succeed. OpenSSL and GnuTLS are link- #
# compatible with each other. #
# #
-# hidden - When using m_spanningtree.so for linking. you may #
+# statshidden - When using m_spanningtree.so for linking. you may #
# set this to 'yes', and if you do, the IP address/ #
# hostname of this connection will NEVER be shown to #
# any opers on the network. In /STATS c its address #
timeout="15"
transport="gnutls"
bind="1.2.3.4"
+ statshidden="no"
hidden="no"
sendpass="outgoing!password"
recvpass="incoming!password">
# configurtion directory. #
# #
-<files motd="inspircd.motd"
- rules="inspircd.rules">
+<files motd="inspircd.motd.example"
+ rules="inspircd.rules.example">
#-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Define your DNS server address here. InspIRCd has its own resolver. #
-# If you do not define this value, the first dns server from your #
-# /etc/resolv.conf file is read. If no entries are found in this file #
-# or the file cannot be opened, the default value '127.0.0.1' is used #
-# instead. The timeout value is in seconds. #
+# If you do not define this value, then then InspIRCd will attempt to #
+# determine your DNS server from your operating system. On POSIX #
+# platforms, InspIRCd will read /etc/resolv.conf, and populate this #
+# value with the first DNS server address found. On Windows platforms #
+# InspIRCd will check the registry, and use the DNS server of the #
+# first active network interface, if one exists. #
+# If a DNS server cannot be determined from these checks, the default #
+# value '127.0.0.1' is used instead. The timeout value is in seconds. #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# query. This is to prevent /WHO being used as a #
# spam vector or means of flooding an ircd. The #
# default is 128, it is not recommended to raise it #
-# above 1024. Values up to 65535 are permitted. #
+# above 1024. Values up to 65535 are permitted. If #
+# this value is omitted, any size WHO is allowed by #
+# anyone. #
# #
# somaxconn - The maximum number of sockets that may be waiting #
# in the accept queue. This usually allows the ircd #
# such as BOPM which rely on them to scan users when #
# a split heals in certain configurations. #
# #
+# pingwarning - This should be set to a number between 1 and 59 if #
+# defined, and if it is defined will cause the server#
+# to send out a warning via snomask +l if a server #
+# does not answer to PING after this many seconds. #
+# This can be useful for finding servers which are #
+# at risk of pinging out due to network issues. #
+# #
+# exemptchanops - This option allows channel operators to be exempted#
+# from certain channel modes. #
+# Supported modes are +SfgNc. Defaults to off. #
+# #
+# defaultmodes - The default modes to be given to each channel on #
+# creation. Defaults to 'nt'. There should be no + #
+# or - symbols in this sequence, if you add them #
+# they will be ignored. You may add parameters for #
+# parameterised modes. #
+# #
+# moronbanner - The NOTICE to show to users who are glined, zlined #
+# klined or qlined when they are disconnected. This #
+# is totally freeform, you may place any text here #
+# you wish. #
+# #
<options prefixquit="Quit: "
loglevel="default"
noservices="no"
qaprefixes="no"
deprotectself="no"
- deprotectothers="no"
+ deprotectothers="no"
somaxconn="128"
softlimit="12800"
userstats="Pu"
cyclehosts="yes"
ircumsgprefix="no"
announcets="yes"
- disablehmac="no"
+ disablehmac="no"
hostintopic="yes"
- hidemodes="eI"
- quietbursts="yes"
- allowhalfop="yes">
+ hidemodes="eI"
+ quietbursts="yes"
+ pingwarning="15"
+ allowhalfop="yes"
+ defaultmodes="nt"
+ moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
+ exemptchanops="">
#-#-#-#-#-#-#-#-#-#-#-#-#-#- TIME SYNC OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#
# Time sychronization options for m_spanningtree linking. #
# <cgihost type="webirc" mask="somebox.mysite.com"> # Get IP from WEBIRC
# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
+#
+# IMPORTANT NOTE:
+# ---------------
+#
+# When you connect CGI:IRC clients, there are two connect classes which
+# apply to these clients. When the client initially connects, the connect
+# class which matches the cgi:irc site's host is checked. Therefore you
+# must raise the maximum local/global clients for this ip as high as you
+# want to allow cgi clients. After the client has connected and is
+# determined to be a cgi:irc client, the class which matches the client's
+# real IP is then checked. You may set this class to a lower value, so that
+# the real IP of the client can still be restricted to, for example, 3
+# sessions maximum.
+#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Chanprotect module: gives +q and +a channel modes
#<module name="m_chanprotect.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Check module: gives /check
+# Check is useful for looking up information on channels,
+# users, IP addresses and hosts.
+#<module name="m_check.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGHOST module: Adds the /CHGHOST command
#<module name="m_chghost.so">
# CHGIDENT module: Adds the /CHGIDENT command
#<module name="m_chgident.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGNAME module: Adds the /CHGNAME command
+#<module name="m_chgname.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support.
# Relies on the module m_md5.so being loaded before m_cloaking.so in
# use hexdecimal numbers prefixed by "0x", as shown in this example, #
# with each key eight hex digits long. #
+#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Close module: Allows an oper to close all unregistered connections.
+#<module name="m_close.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clones module: Adds an oper command /CLONES for detecting cloned
# users. Warning: This module may be resource intensive when its
#
#<autojoin channel="#one,#two,#three">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Lusers: Shows the LUSERS output on connect
-#<module name="m_conn_lusers.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Usermodes: Set modes on users when they connect
# When this module is loaded <connect:allow> tags may have an optional
# #
#<waitpong sendsnotice="yes" killonbadreply="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel cycle module. Server side /hop, with +ilk etc bypass.
+#<module name="m_cycle.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connection throttle module. Configuration:
#<module name="m_connflood.so">
#<connflood seconds="30" maxconns="3" timeout="30"
# quitmsg="Throttled" bootwait="10">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Custom title module: Adds the /TITLE command which allows for trusted
+# users to gain a custom whois line and a optional
+# vhost can be specified.
+#<module name="m_customtitle.so">
+#
+#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# name - The username used to identify
+# password - The password used to identify
+# host - Allowed hostmask [optional]
+# title - Title shown in whois
+# vhost - Displayed host [optional]
+#
+#<title name="foo" password="bar" title="Official Chat Helper">
+#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command
#<module name="m_dccallow.so">
# Optional - If you choose to use the m_hostchange.so module. #
# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
# #
-#<host suffix="polarbears.org">
+#<host suffix="polarbears.org" separator="." prefix="">
#<hostchange mask="*@fbi.gov" action="addnick">
#<hostchange mask="*r00t@*" action="suffix">
#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
# specify the timeout for ident lookups here. If not defined, it will #
# default to one second. This is a non-blocking timeout which holds #
# the user in a 'connecting' state until the lookup is complete. #
+# The bind value indicates which IP to bind outbound requests to. #
# #
-#<ident timeout="5">
+#<ident timeout="5" bind=""> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite except module: Adds support for channel invite exceptions (+I)
# This is supported by mIRC, x-chat, klient, and maybe more.
#<module name="m_namesx.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nickchange flood protection module: Allows up to X nick changes in Y seconds.
+# Provides channel mode +F.
+#<module name="m_nickflood.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
# user from changing their nick again.
# Redirect module: Adds channel redirection (mode +L)
#<module name="m_redirect.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Registered users only channel creation
+# Allows only registered users and opers to create new channels.
+#<module name="m_regonlycreate.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remove module: Adds the /REMOVE command which is a peaceful
# alternative to /KICK
# Securelist can be harmful to some irc search engines such as #
# netsplit.de and searchirc.com. To prevent securelist blocking these #
# sites from listing, define exception tags as shown below: #
-<securelist exception="*@*.searchirc.org">
-<securelist exception="*@*.netsplit.de">
-<securelist exception="*@echo940.server4you.de">
+<securehost exception="*@*.searchirc.org">
+<securehost exception="*@*.netsplit.de">
+<securehost exception="*@echo940.server4you.de">
# #
# Define the following variable to change how long a user must wait #
# before issuing a LIST. If not defined, defaults to 60 seconds. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SILENCE module: Adds support for /SILENCE
#<module name="m_silence.so">
+#
+# Configuration tags:
+#
+#<silence maxentries="32">
+#
+# Sets the maximum number of entries on a users silence list.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Extended SILENCE module: Adds support for /SILENCE with additional
# features to silence based on invites, channel messages, etc.
#<module name="m_silence_ext.so">
+#
+# The configuration tags for this module are identical to those of
+# m_silence, shown above.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLite3 module: Allows other SQL modules to access SQLite3 #
# added/removed by Services. #
#<module name="m_svshold.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
#<module name="m_swhois.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Taxonomy module: Adds the /TAXONOMY command, used to view all
+# metadata attached to a user.
+#<module name="m_taxonomy.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test command module: Does nothing significant. Read: pointless.
#<module name="m_testcommand.so">
# users a /GLINE or /ZLINE etc would match.
#<module name="m_tline.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# UHNAMES support module: Adds support for the IRCX style UHNAMES
+# extension, which displays ident and hostname in the names list for
+# each user, saving clients from doing a WHO on the channel. Note that
+# this module is not widely supported yet. If a client does not support
+# UHNAMES it will not enable it, this will not break incompatible
+# clients.
+#<module name="m_uhnames.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Uninvite module: Adds the /UNINVITE command which lets users remove
# pending invites from channels without waiting for the user to join.
# Watch module: Adds the WATCH command, which is used by clients to
# maintain notify lists.
#<module name="m_watch.so">
+#
+# Configuration tags:
+#
+#<watch maxentries="32">
+#
+# Sets the maximum number of entries on a user's watch list.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# XMLSocket module: Adds support for connections using the shockwave
+# flash XMLSocket. Note that this does not work if the client you are
+# using has retarded ideas of the IRC protocol. Your client must still
+# send RFC-correct lines to the server, this module only changes the
+# line ending from newlines to null terminators.
+#
+#<module name="m_xmlsocket.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ZipLinks module: Adds support for zlib deflate on server to server
# #
# You should already know what to do here :) #
-<die value="User error. Insert new user and press any key.">
+<die value="User error. Insert new user and press any key. (you didn't edit your config properly.)">
#########################################################################