# This is an example of the config file for InspIRCd. #
# Change the options to suit your network #
# #
-# Last updated on : 04/09/2006 #
-# Written by : CC (cc@backchat.co.za) #
-# Updated by : katsklaw (katsklaw@gmail.com) #
-# Updated by : brain (brain@inspircd.org) #
+# Last updated on : 03 Feb 2007 #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# <bind address="ip address" port="port" type="servers"> #
# #
# If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, #
-# then you must specify your IPV6 clients in the following form: #
-# ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 address to bind the #
-# port on. If InspIRCd is built for IPV4 connections (this is the #
-# default) then you do not need to prefix your addresses like this. #
+# then you can specify IPV4 ip addresses here to bind. You may also #
+# use the 4in6 notation, ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 #
+# address to bind the port, but as of InspIRCd 1.1.1, this is not #
+# required. #
+# #
+# ------------------------------------------------------------------- #
+# #
+# PLEASE NOTE: If you have build InspIRCd as an ipv6 server, and you #
+# specify an empty bind address, the binding will be bound to ALL THE #
+# IPV6 IP ADDRESSES, and not the ipv4 addresses. If you are using an #
+# ipv6 enabled InspIRCd and want to bind to multiple IPV4 addresses #
+# in this way, you must specify them by hand. If you have built the #
+# server for ipv4 connections only, then specifying an empty bind #
+# address binds the port to all ipv4 IP addresses, as expected. #
# #
<bind address="" port="6000" type="clients">
# type="oper type"> #
# #
-<oper name="katsklaw"
+<oper name="Brain"
password="s3cret"
host="ident@dialup15.isp.com *@localhost *@server.com *@3ffe::0/16"
- fingerprint="a41d730937a53b79f788c0ab13e9e1d5"
type="NetAdmin">
# that server to operoverride modes. This should only be used for #
# services and protected oper servers! #
# #
-# NOTE: If you have built InspIRCd with IPV6 support, and you want #
-# to link to an IPV4 server, you must specify the IP address in the #
-# form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
-# server. If you have built InspIRCd for IPV4 (this is the default) #
-# you should not prefix your IP addresses in this fashion. #
+# ------------------------------------------------------------------- #
+# #
+# NOTE: If you have built your server as an ipv6 server, then when a #
+# DNS lookup of a server's host occurs, AAAA records (ipv6) are #
+# priorotized over A records (ipv4). Therefore, if the server you are #
+# connecting to has both an IPV6 ip address and an IPV4 ip address in #
+# its DNS entry, the IPV6 address will *always* be selected. To #
+# change this behaviour simply specify the IPV4 IP address rather #
+# than the hostname of the server. #
+# #
+# ------------------------------------------------------------------- #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
<link name="hub.penguin.org"
ipaddr="penguin.box.com"
port="7000"
- allowmask="69.58.44.0/24"
+ allowmask="69.58.44.0/24"
autoconnect="300"
- failover="hub.other.net"
- timeout="15"
- transport="gnutls"
+ failover="hub.other.net"
+ timeout="15"
+ transport="gnutls"
sendpass="outgoing!password"
recvpass="incoming!password">
<link name="services.antarctic.com"
ipaddr="localhost"
port="7000"
- allowmask="127.0.0.0/8"
+ allowmask="127.0.0.0/8"
sendpass="penguins"
recvpass="polarbears">
# resolving even though the DNS server appears to be up! Most ISP and #
# hosting provider DNS servers support recursive lookups. #
# #
-# NOTE: If you have built InspIRCd with IPV6 support, and you want #
-# to use an IPV4 nameserver, you must specify the IP address in the #
-# form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target #
-# server. If you have built InspIRCd for IPV4 (this is the default) #
-# you should not prefix your IP addresses in this fashion. #
+# ------------------------------------------------------------------- #
# #
-# IF YOUR RESOLV.CONF CONTAINS ONLY IPV4 ADDRESSES, AND YOU ARE USING #
-# IPV6, YOU MUST DEFINE THE <DNS SERVER> TAG, AND USE THE ::FFFF #
-# PREFIX NOTATION. IF YOU DO NOT, HOSTS WILL *NOT* RESOLVE. #
+# NOTE: if you have built InspIRCd with IPV6 support, then both #
+# ipv6 and ipv4 addresses are allowed here, and also in the system #
+# resolv.conf file. Remember that an ipv4 dns server can still #
+# resolve ipv6 addresses, and vice versa. #
# #
<dns server="127.0.0.1" timeout="5">
-# An example of using IPV4 nameservers over IPV6
-#<dns server="::ffff:127.0.0.1" timeout="5">
+# An example of using an IPV6 nameserver
+#<dns server="::1" timeout="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Ban except module: Adds support for channel ban exceptions (+e)
#<module name="m_banexception.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban redirection module: Allows bans which redirect to a specified
+# channel. e.g. +b nick!ident@host#channelbanneduserissentto
+#<module name="m_banredirect.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block amsg module: Attempt to block all usage of /amsg and /ame
#<module name="m_blockamsg.so">
# To use this module, you must define a hash type for each oper's
# password you want to hash. For example:
#
-# <oper name="katsklaw"
+# <oper name="Brain"
# host="ident@dialup15.isp.com"
# hash="sha256"
# password="a41d730937a53b79f788c0ab13e9e1d5"
# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
#<module name="m_saquit.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Secure list module: Prevent /LIST in the first minute of connection,
# crippling most spambots and trojan spreader bots.
#<module name="m_securelist.so">
+#
+#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Securelist can be harmful to some irc search engines such as #
+# netsplit.de and searchirc.com. To prevent securelist blocking these #
+# sites from listing, define exception tags as shown below: #
+<securelist exception="*@*.searchirc.org">
+<securelist exception="*@*.netsplit.de">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set Idle module: Adds a command for opers to change their
# features to silence based on invites, channel messages, etc.
#<module name="m_silence_ext.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLite3 module: Allows other SQL modules to access SQLite3 #
+# databases through a unified API. You must link the source for this #
+# module from the directory src/modules/extra to src/modules, plus #
+# the file m_sqlv2.h #
+#<module name="m_sqlite3.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_sqlite.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module #
+#
+#<database hostname="/full/path/to/database.db" id="anytext">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLutils module: Provides some utilities to SQL client modules, such
# as mapping queries to users and channels. You must copy the source
projects / user / henk / code / inspircd.git / blobdiff