# This is an example of the config file for InspIRCd. #
# Change the options to suit your network #
# #
-# Last updated on : 01/05/2004 #
+# Last updated on : 06/06/2005 #
# Written by : CC (cc@backchat.co.za) #
-# Updated by : BlackDeathX (james@dreamirc.org) #
+# Updated by : katsklaw (katsklaw@gmail.com) #
########################################################################
# email="email@address.com"> #
# #
-<admin name="Johnny Casino"
- nick="CC"
- email="cc@monkeynut.co.za">
+<admin name="Johnny English"
+ nick="MI5"
+ email="MI5@the.best.secret.agent">
#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
<power diepass="diepass" restartpass="restartpass" pause="2">
+#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This optional tag allows you to include another config file #
+# allowing you to keep your configuration tidy. The configuration #
+# file you include will be treated as part of the configuration file #
+# which includes it, in simple terms the inclusion is transparent. #
+# #
+# All paths to config files are relative to the directory of the main #
+# config file inspircd.conf, unless the filename starts with a forward#
+# slash (/) in which case it is treated as an absolute path. #
+# #
+# Syntax is as follows: #
+# <include file="file.conf"> #
+# #
+
#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
# #
# This is where you can configure which connections are allowed #
# To allow/deny all connections use a * #
# #
# Syntax is as follows: #
-# <connect allow="ip number"> #
-# <connect allow="ip number" password="blahblah"> #
-# <connect allow="ip number" password="blah" timeout="10"> #
-# <connect allow="ip number" timeout="blah" flood="5"> #
-# <connect deny="ip number"> #
+# <connect allow="ip or host"> #
+# <connect allow="ip or host" password="blahblah"> #
+# <connect allow="ip or host" password="blah" timeout="10"> #
+# <connect allow="ip or host" timeout="blah" flood="5"> #
+# <connect allow="ip or host" threshold="8" pingfreq="120"> #
+# <connect allow="ip or host" sendq="99999" revcq="696969"> #
+# <connect deny="ip or host"> #
# #
# You may optionally include timeout="x" on any allow line, which #
# specifies the amount of time given before an unknown connection #
# You may also optionally include a flood="x" line which indicates #
# the number of lines a user may place into their buffer at once #
# before they are disconnected for excess flood. The default is to #
-# DISABLE this feature. A recommended value is 10. #
-
+# DISABLE this feature. A recommended value is 10. A counter is #
+# maintained for each user which is reset every 'threshold' seconds #
+# and specifying this threshold value with threshold="X" indicates #
+# how often the counter is reset. For example, with flood="5" and #
+# threshold="8", the user may not send more than 5 lines in 8 secs. #
+# #
+# You may optionally specify the sendq size and ping frequency of #
+# each connect:allow line using the pingfreq="X" and sendq="X" #
+# settings as shown in the full example below. #
+# The ping frequency is specified in seconds, and the sendq size #
+# in bytes. It is recommended, although not enforced, that you #
+# should never set your sendq size to less than 8k. Send Queues are #
+# dynamically allocated and can grow as needed up to the maximum #
+# size specified. #
+# #
+# The optional recvq value is the maximum size which users in this #
+# group may grow their receive queue to. This is recommended to be #
+# kept pretty low compared to the sendq, as users will always #
+# recieve more than they send in normal circumstances. The default #
+# if not specified is 4096. #
+# #
+# IMPORTANT NOTE, CALL THE CONFUSION POLICE! #
+# The sendq is the data waiting to be sent TO THE USER. #
+# The recvq is the data being received FROM THE USER. #
+# The names sendq and recvq are from the SERVER'S PERSPECTIVE not #
+# that of the user... Just to clear up any confusion or complaints #
+# that these are backwards :p #
+# #
<connect allow="196.12.*" password="secret">
-<connect allow="*" timeout="60" flood="10">
+<connect allow="*" timeout="60" flood="10" threshold="60" pingfreq="120" sendq="262144" recvq="4096">
<connect deny="69.254.*">
# classes - specified above, used for flexibility for the #
# server admin to decide on which operators get #
# what commands #
-# host - hostmask operators will recieve on oper-up #
-# #
+# host - hostmask operators will recieve on oper-up. #
+#(optional) #
+# #
# Syntax is as follows: #
# <type name="name" classes="class name" host="oper hostmask"> #
# #
# #
# name - oper name, best to use lower-case #
# password - password to oper-up, #
-# encryption not yet available #
+# encryption not supported by inspircd. However, there #
+# are modules that allow for oper password encryption. #
+# #
# host - host of client allowed to oper-up, more hostmasks #
# seperated by spaces, wildcards accepted #
# type - specified above, defines the kind of operator #
# type="oper type"> #
# #
-<oper name="cc"
+<oper name="katsklaw"
password="s3cret"
host="*@*"
type="NetAdmin">
# Defines which servers can link to this one, and which servers this #
# server may create outbound links to. #
# #
-# name - The name is the canocial name of the server, it does #
-# not have to resolve - but it is expected to be sent in #
-# the remote servers connection info. #
-# ipaddr - Valid ip address for remote server. #
-# port - Valid listening UDP port for remote server. #
-# sendpass - Password to send to create an outbound connection to #
-# this server. #
-# recvpass - Password to receive to accept an inbound connection #
-# from this server. #
+# name - The name is the canocial name of the server, it does #
+# not have to resolve - but it is expected to be sent #
+# in the remote servers connection info. #
+# ipaddr - Valid host or ip address for remote server. * #
+# port - Valid listening UDP port for remote server. #
+# sendpass - Password to send to create an outbound connection to #
+# this server. #
+# recvpass - Password to receive to accept an inbound connection #
+# from this server. #
+# autoconnect - Sets the server to autoconnect. Where x is the number #
+# (optional) of seconds between attempts. 300 = 5 minutes #
# #
# to u:line a server (give it extra privilages required for running #
# services, Q, etc) you must include the <uline server> tag as shown #
# that server to operoverride modes. This should only be used for #
# services and protected oper servers! #
# #
+# IMPORTANT NOTE: When specifying the ip address and/or host, the #
+# server software will prioritize RESOLVED hostnames above ip #
+# addresses, so for example if your target server resolves to a.b.com #
+# you MUST put a.b.com into your link block, and NOT the IP address #
+# of a.b.com. The system uses reverse resolution. #
+# #
<link name="hub.penguin.org"
- ipaddr="12.34.56.78"
+ ipaddr="penguin.box.com"
port="7000"
+ autoconnect="300"
sendpass="outgoing!password"
recvpass="incoming!password">
<link name="services.antarctic.com"
- ipaddr="98.76.54.32"
+ ipaddr="localhost"
port="7000"
sendpass="penguins"
recvpass="polarbears">
<uline server="services.antarctic.com">
-
#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# These options let you define the path to your motd and rules #
# files. #
# #
-<files motd="/home/cc/inspircd-1.0/conf/inspire.motd"
- rules="/home/cc/inspircd-1.0/conf/inspire.rules">
+<files motd="/home/cc/inspircd/conf/inspire.motd"
+ rules="/home/cc/inspircd/conf/inspire.rules">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Just remove this... Its here to make you read ALL of the config #
# file options ;) #
-<die value="And god came down from the heavens and smote down the noob.">
+<die value="You should probably edit your config *PROPERLY* and try again.">
# spam vector or means of flooding an ircd. The #
# default is 128, it is not recommended to raise it #
# above 1024. Values up to 65535 are permitted. #
+# somaxconn - The maximum number of sockets that may be waiting #
+# in the accept queue. This usually allows the ircd #
+# to soak up more connections in a shorter space of #
+# time when increased but please be aware there is a #
+# system defined maximum value to this, the same way #
+# there is a system defined maximum number of file #
+# descriptors. Some systems may only allow this to #
+# be up to 5 (ugh) while others such as FreeBSD will #
+# default to a much nicer 128. #
+# moduledir - This optional value indicates a runtime change of #
+# the location where modules are to be found. This #
+# does not add a supplementary directory. There can #
+# only be one module path. #
+# softlimit - This optional feature allows a defined softlimit. #
+# if defined sets a soft maxconnections value, has #
+# to be less than the ./configure maxclients #
+# #
<options prefixquit="Quit: "
loglevel="default"
netbuffersize="10240"
maxwho="128"
noservices="0"
- allowhalfop="yes">
+ somaxconn="128"
+ softlimit="128"
+ allowhalfop="yes">
# using the 'make' command, all compiled modules will be moved into #
# the folder you specified when you ran ./configure. The module tag #
# automatically looks for modules in this location. #
+# If you attempt to load a module outside of this location, either #
+# in the config, or via /LOADMODULE, you will receive an error. #
+# #
+# By default, ALL modules are commented out. You must uncomment them #
+# or add lines to your config to load modules. Please refer to #
+# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
+# each modules link for any additional conf tags they require. #
+# #
+# WINDOWS USERS PLEASE NOTE: You can still load these modules! They #
+# are incorporated into the executable and can be loaded and removed #
+# similarly to if they were in a ramdisk. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Foobar module - does nothing
+#<module name="m_foobar.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Chanprotect module: gives +q and +a channel modes
+#<module name="m_chanprotect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Globops module: gives /GLOBOPS and usermode +g
+#<module name="m_globops.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Noinvite module: Gives channel mode +V
+#<module name="m_noinvite.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper MD5 module: Allows MD5 hashed oper passwords
+#<module name="m_opermd5.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restricted channels module: Allows only opers to create channels
+#<module name="m_restrictchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deny Channels: Deny Channels from being used by users
+#<module name="m_denychans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Services support module: Adds several usermodes such as +R and +M
+#<module name="m_services.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Userip module: Adds the /USERIP command
+#<module name="m_userip.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alias module: Allows you to define server-side command aliases
+#<module name="m_alias.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGHOST module: Adds the /CHGHOST command
+#<module name="m_chghost.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HELPOP module: Provides the /HELPOP command
+#<module name="m_helpop.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No kicks module: Adds the +Q channel mode
+#<module name="m_nokicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper MOTD module: Provides support for seperate message of the day
+# on oper-up
+#<module name="m_opermotd.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restrict message module: Allows users to only message opers
+#<module name="m_restrictmsg.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Sethost module: Adds the /SETHOST command
+#<module name="m_sethost.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibottler module: Labels bottler leech bots
+#<module name="m_antibottler.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Watch module: Adds the WATCH command, which is used by clients to
+# maintain notify lists.
+#<module name="m_watch.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Cloaking module: Adds usermode +x and cloaking support
+#<module name="m_cloaking.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Hostchange module: Allows a different style of cloaking
+#<module name="m_hostchange.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No nicks module: Adds the +N channel mode
+#<module name="m_nonicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Override module: Adds support for oper override
+#<module name="m_override.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAJOIN module: Adds the /SAJOIN command
+#<module name="m_sajoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Set Idle module: Adds a command for opers to change their
+# idle time (mainly a toy)
+#<module name="m_setidle.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block colour module: Adds the +c channel mode
+#<module name="m_blockcolor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Lusers: Shows the LUSERS output on connect
+#<module name="m_conn_lusers.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ident: Provides RFC 1413 ident lookup support
+#<module name="m_ident.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No Notice module: adds the channel mode +T
+#<module name="m_nonotice.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Parking module: Adds parking support and /PARK and /UNPARK
+#<module name="m_park.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAMODE module: Adds the oper /SAMODE command
+#<module name="m_samode.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SETNAME module: Adds the /SETNAME command
+#<module name="m_setname.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Botmode module: Adds the user mode +B
+#<module name="m_botmode.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Filter module: Provides glob-based message filtering
+#<module name="m_filter.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Knock module: adds the /KNOCK command and +K channel mode
+#<module name="m_knock.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper channels mode: Adds the +O channel mode
+#<module name="m_operchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Random Quote module: provides a random quote on connect
+#<module name="m_randquote.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SANICK module: Allows opers to change user's nicks
+#<module name="m_sanick.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Show Whois module: Adds the +W usermode which allows opers
+# to see when they are whois'ed
+#<module name="m_showwhois.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Strip colour module: Adds the channel mode +S
+#<module name="m_stripcolor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Censor module: Adds the channel mode +G
+#<module name="m_censor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nick locking module: Adds the oper-only /NICKLOCK command
+#<module name="m_nicklock.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper Join module: Forces opers to join a channel on oper-up
+#<module name="m_operjoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Redirect module: Adds channel redirection (mode +L)
+#<module name="m_redirect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAPART module: Adds the oper /SAPART command
+#<module name="m_sapart.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SILENCE module: Adds support for /SILENCE
+#<module name="m_silence.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test command module: Does nothing significant
+#<module name="m_testcommand.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel filter module: Allows channel-op defined message
+# filtering using simple string matches (channel mode +g)
+#<module name="m_chanfilter.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No ctcp module: Adds the channel mode +C to block CTCPs
+#<module name="m_noctcp.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper levels module: Gives each oper a level and prevents
+# actions being taken against higher level opers
+#<module name="m_operlevels.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Remove module: Adds the /REMOVE command which is a peaceful
+# alternative to /KICK
+#<module name="m_remove.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
+#<module name="m_saquit.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Timed bans module: Adds timed bans and the /TBAN command
+#<module name="m_timedbans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper modes module: Allows you to specify modes to add/remove on oper
+#<module name="m_opermodes.so">
-<module name="m_foobar.so">
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
# Optional - If you specify to use the m_filter.so module, then #
# specfiy below the path to the filter.conf file. #
-<filter file="/path/to/inspircd/filter.conf">
+#<filter file="/path/to/inspircd/filter.conf">
#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# Optional - If you specify to use the m_helpop.so module, then #
# specify below the path to the helpop.conf file. #
-<helpop file="/path/to/inspircd/helpop.conf">
+<die value="If you used the helpop include above then do *NOT* use this tag.">
+#<helpop file="/path/to/inspircd/helpop.conf">
#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# Optional - If you specify to use the m_randquotes.so module, then #
# specify below the path to the randquotes.conf file. #
-<randquote file="/path/to/inspircd/randquotes.conf">
+#<randquote file="/path/to/inspircd/randquotes.conf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
<alias text="NICKSERV" replace="PRIVMSG NickServ :" requires="NickServ" uline="yes">
<alias text="CHANSERV" replace="PRIVMSG ChanServ :" requires="ChanServ" uline="yes">
-<alias text="NS ID" replace="PRIVMSG NickServ :identify" requires="NickServ" uline="yes">
<alias text="NS" replace="PRIVMSG NickServ :" requires="NickServ" uline="yes">
<alias text="CS" replace="PRIVMSG ChanServ :" requires="ChanServ" uline="yes">
# #
# You should already know what to do here :) #
-<die value="All l33t noobs must edit their configs.">
+<die value="You should probably edit your config *PROPERLY* and try again.">
#########################################################################