# This is an example of the config file for InspIRCd. #
# Change the options to suit your network #
# #
-# Last updated on : 04/09/2006 #
-# Written by : CC (cc@backchat.co.za) #
-# Updated by : katsklaw (katsklaw@gmail.com) #
-# Updated by : brain (brain@inspircd.org) #
+# Last updated on : 03 Feb 2007 #
# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Describes the Server Administrator's real name, nick #
-# and email address. #
+# Describes the Server Administrator's real name (optionally), #
+# nick, and email address. #
# #
# Syntax is as follows: #
# <admin name="real name" #
# You should also include a flood="x" line which indicates #
# the number of lines a user may place into their buffer at once #
# before they are disconnected for excess flood. This feature can #
-# not be disabled, however it can be set to exremely high values, #
+# not be disabled, however it can be set to extremely high values, #
# rendering it effectively disabled. A recommended value is 10. #
# A counter is maintained for each user which is reset every #
# 'threshold' seconds and specifying this threshold value with #
# The optional recvq value is the maximum size which users in this #
# group may grow their receive queue to. This is recommended to be #
# kept pretty low compared to the sendq, as users will always #
-# recieve more than they send in normal circumstances. The default #
+# receive more than they send in normal circumstances. The default #
# if not specified is 4096. #
# #
# IMPORTANT NOTE, CALL THE CONFUSION POLICE! #
# what commands. Class names are case sensitive, #
# seperate multiple class names with spaces. #
# #
-# host - optional hostmask operators will recieve on oper-up. #
+# host - optional hostmask operators will receive on oper-up. #
# #
# Syntax is as follows: #
# #
# is not loaded, this configuration option has no #
# effect and will be ignored. #
# #
-# type - Sefines the kind of operator. This must match a type #
+# type - Defines the kind of operator. This must match a type #
# tag you defined above, and is case sensitive. #
# #
# Syntax is as follows: #
# type="oper type"> #
# #
-<oper name="katsklaw"
+<oper name="Brain"
password="s3cret"
host="ident@dialup15.isp.com *@localhost *@server.com *@3ffe::0/16"
- fingerprint="a41d730937a53b79f788c0ab13e9e1d5"
type="NetAdmin">
<link name="hub.penguin.org"
ipaddr="penguin.box.com"
port="7000"
- allowmask="69.58.44.0/24"
+ allowmask="69.58.44.0/24"
autoconnect="300"
- failover="hub.other.net"
- timeout="15"
- transport="gnutls"
+ failover="hub.other.net"
+ timeout="15"
+ transport="gnutls"
sendpass="outgoing!password"
recvpass="incoming!password">
<link name="services.antarctic.com"
ipaddr="localhost"
port="7000"
- allowmask="127.0.0.0/8"
+ allowmask="127.0.0.0/8"
sendpass="penguins"
recvpass="polarbears">
# Ban except module: Adds support for channel ban exceptions (+e)
#<module name="m_banexception.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban redirection module: Allows bans which redirect to a specified
+# channel. e.g. +b nick!ident@host#channelbanneduserissentto
+#<module name="m_banredirect.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block amsg module: Attempt to block all usage of /amsg and /ame
#<module name="m_blockamsg.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block CAPS module: Blocking all-CAPS messages with cmode +P
#<module name="m_blockcaps.so">
+# #
+#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# percent - How many percent of text must be caps before text #
+# will be blocked. #
+# #
+# minlen - The minimum length a line must be for the block #
+# percent to have any effect. #
+# #
+#<blockcaps percent="95" minlen="5">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block colour module: Blocking colour-coded messages with cmode +c
# be included. However, if prefix is not included, it will default #
# to your networks name from the <server> tag. #
# #
-# <cloak key1="543241423" #
-# key2="5378410432" #
-# key3="1143242382" #
-# key4="9504324581" #
+# <cloak key1="0x2AF39F40" #
+# key2="0x78E10B32" #
+# key3="0x4F2D2E82" #
+# key4="0x043A4C81" #
# prefix="mynet"> #
# #
# Please note that the key values will accept any number, and should #
# be large numbers. Using small numbers such as "7" or "1924" will #
-# seriously weaken the security of your cloak. #
+# seriously weaken the security of your cloak. It is recommended you #
+# use hexdecimal numbers prefixed by "0x", as shown in this example, #
+# with each key eight hex digits long. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Conn-Lusers: Shows the LUSERS output on connect
# Devoice Module: Let users devoice themselves.
#<module name="m_devoice.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DNS Blacklist Module: Provides support for looking up IPs on one or #
+# more blacklists. #
+#<module name="m_dnsbl.so"> #
+# #
+# For configuration options please see the wiki page for m_dnsbl at #
+# http://inspircd.org/wiki/DNS_Blacklist_Module #
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides glob-based message filtering
#<module name="m_filter.so">
# Knock module: adds the /KNOCK command and +K channel mode
#<module name="m_knock.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
+# used to temporarily close/open for new connections to the server. #
+# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
+# are specified in a <class> tag that the oper is part of. This is so #
+# you can control who has access to this possible dangerous command. #
+# If your server is locked and you got disconnected, do a REHASH from #
+# shell to open up again.
+#<module name="m_lockserv.so">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Msg flood module: Adds message/notice flood protection (+f)
#<module name="m_messageflood.so">
# To use this module, you must define a hash type for each oper's
# password you want to hash. For example:
#
-# <oper name="katsklaw"
+# <oper name="Brain"
# host="ident@dialup15.isp.com"
# hash="sha256"
# password="a41d730937a53b79f788c0ab13e9e1d5"
# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
#<module name="m_saquit.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Secure list module: Prevent /LIST in the first minute of connection,
# crippling most spambots and trojan spreader bots.
#<module name="m_securelist.so">
+#
+#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Securelist can be harmful to some irc search engines such as #
+# netsplit.de and searchirc.com. To prevent securelist blocking these #
+# sites from listing, define exception tags as shown below: #
+<securelist exception="*@*.searchirc.org">
+<securelist exception="*@*.netsplit.de">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set Idle module: Adds a command for opers to change their
# features to silence based on invites, channel messages, etc.
#<module name="m_silence_ext.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLite3 module: Allows other SQL modules to access SQLite3 #
+# databases through a unified API. You must link the source for this #
+# module from the directory src/modules/extra to src/modules, plus #
+# the file m_sqlv2.h #
+#<module name="m_sqlite3.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_sqlite.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module #
+#
+#<database hostname="/full/path/to/database.db" id="anytext">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQLutils module: Provides some utilities to SQL client modules, such
# as mapping queries to users and channels. You must copy the source