#<connflood seconds="30" maxconns="3" timeout="30"
# quitmsg="Throttled" bootwait="10">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Custom prefixes : allows for channel prefixes to be added.
+# This replaces m_chanprotect and m_halfop
+#<module name="m_customprefix.so">
+#
+# name The name of the mode, must be unique from other modes
+# letter The letter used for this mode. Required.
+# prefix The prefix used for nicks with this mode. Not required.
+# rank A numeric rank for this prefix, defining what permissions it gives
+# VOICE_VALUE is 10000, HALFOP_VALUE is 20000, OP_VALUE is 30000
+# ranktoset The numeric rank required to set/unset this mode. Defaults to rank.
+# depriv Can you remove the mode from yourself? Defaults to yes.
+#<customprefix name="founder" letter="q" prefix="~" rank="50000" ranktoset="50000">
+#<customprefix name="admin" letter="a" prefix="&" rank="40000" ranktoset="50000">
+#<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
+<customprefix name="halfvoice" letter="V" prefix="-" rank="1" ranktoset="20000">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Custom title module: Adds the /TITLE command which allows for trusted
# users to gain a custom whois line and a optional
# modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, #
# filter, regmoderated, nonick, nonotice, and stripcolor. #
#<module name="m_exemptchanops.so"> #
-# #
-#-#-#-#-#-#-#-#-#-#- EXEMPTCHANOPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-# alwaysexempt - Modes channel operators are always exempt from,
-# regardless of channel setting.
-# neverexempt - Modes channel operators are never exempt from,
-# regardless of channel setting.
-#<exemptchanops alwaysexempt="nickflood censor flood filter" neverexempt="regmoderated">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides message filtering, similar to SPAMFILTER.
#<module name="m_gecosban.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GeoIP module: Allows the server admin to ban users by country code.
+# GeoIP module: Allows the server admin to match users by country code.
# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp
# and run make install, then uncomment this module to enable it.
# This module requires GeoIP to be installed on your system,
# or check the InspIRCd wiki page for this module.
#<module name="m_geoip.so">
#
-#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# <geoip banunknown="false"> #
-# #
-# Set this value to true or yes to block unknown IP ranges which are #
-# not in the database (usually LAN addresses, localhost, etc) #
-# #
-# <geoban country="TR" reason="This country not permitted"> #
-# #
-# Use one or more of these tags to ban countries by country code. #
-# The country code must be in capitals and should be an ISO country #
-# code such as TR, GB, or US. #
+# The actual allow/ban actions are done by connect classes, not by the
+# GeoIP module. An example connect class to ban people from russia or
+# turkey:
+#
+# <connect deny="*" geoip="TR,RU">
+#
+# The country code must be in capitals and should be an ISO country
+# code such as TR, GB, or US. Unknown IPs (localhost, LAN IPs, etc)
+# will be assigned the country code "UNK". Since connect classes are
+# matched from top down, your deny classes must be above your allow
+# classes for them to match.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Globops module: gives /GLOBOPS and SNOMASK +g
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite except module: Adds support for channel invite exceptions (+I)
#<module name="m_inviteexception.so">
+# Does a +I bypass channel +k in addition to +i?
+#<inviteexception bypasskey="yes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invisible module - Adds support for usermode +Q (quiet) which lets an
# This module is oper-only. For the user equivalent, see m_conn_umodes
#<module name="m_opermodes.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Password forwarding module: Forwards a password users can send on connect
+# to the specified client below. The client is usually nickserv and this
+# module is usually used to authenticate users with nickserv using their
+# connect password.
+#<module name="m_passforward.so">
+
+<passforward
+ # nick: nick to forward connect passwords to.
+ nick="NickServ"
+
+ # forwardmsg: Message to send to users using a connect password.
+ # $nick will be the users' nick, $nickrequired will be the nick
+ # of where the password is going (the nick above).
+ forwardmsg="NOTICE $nick :*** Forwarding PASS to $nickrequired"
+
+ # cmd: Command for the nick to run when it recieves a connect
+ # password.
+ cmd="PRIVMSG $nickrequired :IDENTIFY $pass">
+
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper password hash module: Allows hashed oper passwords
# Relies on the module m_md5.so and/or m_sha256.so being loaded before
# use glob. For this reason, is recommended to use a real regex engine
# so that at least \s or [[:space:]] is available.
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# JSON-RPC module: Encode and decode JSON-RPC requests for modules
-#<module name="m_rpc_json.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# RPC test module: A test of the RPC API
-#<module name="m_rpctest.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command
# This module is oper-only.
# server to server traffic, you MUST load it before m_spanningtree in #
# your configuration file! #
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Status prefix: Adds the channel mode +V
-#<module name="m_statusprefix.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip colour module: Adds the channel mode +S
#<module name="m_stripcolor.so">