# http://wiki.inspircd.org/Modules for a list of modules and #
# each modules link for any additional conf tags they require. #
# #
-# You may use wildcards in a <module> tag to load all modules which #
-# match a glob pattern (e.g. m_sa????.so would load m_sajoin, #
-# m_sapart, m_saquit and m_sanick) #
-# #
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# To link servers to InspIRCd, you MUST load the m_spanningtree #
-# module. Since several features (like SSL server links) rely on #
-# other modules being loaded before m_spanningtree, the module itself #
-# is at the bottom of this file. DO NOT forget to load it. If you DO #
-# NOT do this, server links will NOT work at all. ie. The ports will #
-# NOT bind, and /connect will not work properly. This is by design, #
-# to allow for the implementation of other linking protocols in #
-# modules in the future. #
+# module. If you don't do this, server links will NOT work at all. #
+# This is by design, to allow for the implementation of other linking #
+# protocols in modules in the future. #
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# To use, ALLTIME must be in one of your oper class blocks.
#<module name="m_alltime.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Antibear security module: Prevents 'bear.txt' based trojans from
-# connecting to your network by sending them a numeric they can't handle.
-#<module name="m_antibear.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Antibottler module: Labels bottler leech bots
-#<module name="m_antibottler.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auditorium module: Adds channel mode +u which makes everyone else
# except you in the channel invisible, used for large meetings etc.
# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block colour module: Blocking colour-coded messages with cmode +c
+# Block color module: Blocking color-coded messages with cmode +c
#<module name="m_blockcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel Names module: Allows disabling channels which have certain
-# characters in the channel name such as bold, colourcodes, etc which
+# characters in the channel name such as bold, colorcodes, etc which
# can be quite annoying and allow users to on occasion have a channel
# that looks like the name of another channel on the network.
#<module name="m_channames.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Custom prefixes : allows for channel prefixes to be added.
-# This can replace m_chanprotect and m_halfop, except for interation with services
+# This can replace m_chanprotect and m_halfop, except for services that
+# recognise those modules by name
#<module name="m_customprefix.so">
#
# name The name of the mode, must be unique from other modes
# Does a +I bypass channel +k in addition to +i?
#<inviteexception bypasskey="yes">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Invisible module - Adds support for usermode +Q (quiet) which lets an
-# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
-# opers are still able to see invisible users, and if an oper with +Q
-# deopers, they will become visible.
-#
-# This module is oper-only and seen by many to be quite abusive.
-#
-#<module name="m_invisible.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Join flood module: Adds support for join flood protection (+j)
#<module name="m_joinflood.so">
# bindauth="mysecretpass" #
# verbose="yes"> #
# #
+# <ldapwhitelist cidr="10.42.0.0/16"> #
+# #
# The baserdn indicates the base DN to search in for users. Usually #
# this is 'ou=People,dc=yourdomain,dc=yourtld'. #
# #
# allow anonymous searching in which case these two values do not #
# need defining, otherwise they should be set similar to the examples #
# above. #
+# #
+# ldapwhitelist indicates that clients connecting from an IP in the #
+# provided CIDR do not need to authenticate against LDAP. It can be #
+# repeated to whitelist multiple CIDRs. #
+
+# ldapwhitelist indicates that clients connecting from the associated #
+# CIDR do to authenticate against LDAP. It can be used multiple #
+# times. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LDAP oper configuration module: Adds the ability to authenticate #
# m_mssql.so is more complex than described here, see wiki for more #
# info http://wiki.inspircd.org/Modules/mssql #
#
-#<database module="mssql" name="db" username="user" password="pass" hostname="localhost" id="db1">
+#<database module="mssql" name="db" user="user" pass="pass" host="localhost" id="db1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MySQL module: Allows other SQL modules to access MySQL databases
# m_mysql.so is more complex than described here, see the wiki for #
# more: http://wiki.inspircd.org/Modules/mysql #
#
-#<database module="mysql" name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
+#<database module="mysql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database2">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Named Modes module: This module allows for the display and set/unset
cmd="PRIVMSG $nickrequired :IDENTIFY $pass">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper password hash module: Allows hashed oper passwords
-# Relies on the module m_md5.so and/or m_sha256.so being loaded before
-# m_password_hash.so in the configuration file.
-# This module is oper-only.
+# Password hash module: Allows hashed passwords to be used.
+# To be useful, a hashing module like m_sha256.so also needs to be loaded.
+#
#<module name="m_password_hash.so">
#
-#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
#
# To use this module, you must define a hash type for each oper's
# password you want to hash. For example:
# <oper name="Brain"
# host="ident@dialup15.isp.com"
# hash="sha256"
-# password="a41d730937a53b79f788c0ab13e9e1d5"
+# password="01ba4719c80b6fe911b091a7c05124b64eeece964e09c058ef8f9805daca546b"
# type="NetAdmin">
#
-# The types of hashing available vary depending on which hashing modules
-# you load, but usually if you load m_sha256.so and m_md5.so, both md5
-# and sha256 type hashing will be available (the most secure of which
-# is SHA256).
+# Starting from 2.0, you can use a more secure salted hash that prevents simply
+# looking up the hash's value in a rainbow table built for the hash.
+# hash="hmac-sha256" password="lkS1Nbtp$CyLd/WPQXizsbxFUTqFRoMvaC+zhOULEeZaQkUJj+Gg"
+#
+# Generate hashes using the /MKPASSWD command on the server. Don't run it on a
+# server you don't trust with your password.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Permanent Channels module: Channels with the permanent channels mode
# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
# If you want to do this, set the filename below, and uncomment the include.
#
-#<permchanneldb filename="conf/permchannels.conf">
-#<include file="permchannels.conf">
+#<permchanneldb filename="data/permchannels.conf">
+#<include file="data/permchannels.conf">
#
# You may also create channels on startup by using the <permchannels> block.
-#<permchannels channel="#opers" modes="is" topic="Opers only.">
+# Don't forget to set them +P in the modes, or they won't stay permanent.
+#<permchannels channel="#opers" modes="isP" topic="Opers only.">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# PostgreSQL module: Allows other SQL modules to access PgSQL databases
# m_pgsql.so is more complex than described here, see the wiki for #
# more: http://wiki.inspircd.org/Modules/pgsql #
#
-#<database module="pgsql" name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
+#<database module="pgsql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database" ssl="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Muteban: Implements extended ban m:, which stops anyone matching
# your configuration file! #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Strip colour module: Adds the channel mode +S
+# Strip color module: Adds the channel mode +S
#<module name="m_stripcolor.so">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#
#<database module="sqlite" hostname="/full/path/to/database.db" id="anytext">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQLutils module: Provides some utilities to SQL client modules, such
-# as mapping queries to users and channels. You must copy the source
-# for this module from the directory src/modules/extra/m_sqlutils.cpp
-# and src/modules/extra/m_sqlutils.h into /src/modules
-# Needed for, and loaded before: SQLauth and SQLoper
-# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqlutils.cpp
-# and run make install, then uncomment this module to enable it.
-#
-#<module name="m_sqlutils.so">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL authentication module: Allows IRCd connections to be tied into
# a database table (for example a forum). You must copy the source for
# m_sqlauth.so is too complex it describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/sqlauth #
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL logging module: Allows you to log network-wide data for your
-# network in a fully normalised set of SQL tables. You must copy the
-# source for this module from the directory src/modules/extra
-# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sqllog.cpp
-# and run make install, then uncomment this module to enable it.
-#
-#<module name="m_sqllog.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# dbid - Database ID to use (see m_sql) #
-# #
-# See also: http://wiki.inspircd.org/Modules/sqllog #
-# #
-#<sqllog dbid="1">
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SQL oper module: Allows you to store oper credentials in an SQL table
# You must copy the source for this module from the directory src/modules/extra
# be a lot less bans to apply - as most of them will already be there.
#<module name="m_xline_db.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# ZipLinks module: Adds support for zlib deflate on server to server
-# connections. Both ends of the connection must load this module.
-# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_ziplink.cpp
-# and run make install, then uncomment this module to enable it.
-#
-#<module name="m_ziplink.so">
-#
-# To use this module, you must enable it as a ssl type in your
-# <link> tags or <bind> tags using the ssl name 'ziplinks'.
-# See the documentation of <link> and <bind>, respectively.
-#
-
-
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ____ _ _____ _ _ ____ _ _ _ #
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
# To link servers to InspIRCd, you MUST load the m_spanningtree #
-# module. Since several features (like SSL server links) rely on #
-# other modules being loaded before m_spanningtree, the module itself #
-# is at the bottom of this file. DO NOT forget to load it. If you DO #
-# NOT do this, server links will NOT work at all. ie. The ports will #
-# NOT bind, and /connect will not work properly. This is by design, #
-# to allow for the implementation of other linking protocols in #
-# modules in the future. #
+# module. If you don't do this, server links will NOT work at all. #
+# This is by design, to allow for the implementation of other linking #
+# protocols in modules in the future. #
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
projects / user / henk / code / inspircd.git / blobdiff