X-Git-Url: https://git.netwichtig.de/gitweb/?a=blobdiff_plain;f=conf%2Fmodules.conf.example;h=9bc9dca0503b17e65a37ddd4404bfdc8b830660d;hb=e4a590c7926b4b9454093f88b2d4d1616b717df2;hp=bf11a5ecd3660e8f044c785bad50d38d6cf304c3;hpb=db3b51a5b43825317bbdd3a4f76409e7a27672dc;p=user%2Fhenk%2Fcode%2Finspircd.git

diff --git a/conf/modules.conf.example b/conf/modules.conf.example
index bf11a5ecd..9bc9dca05 100644
--- a/conf/modules.conf.example
+++ b/conf/modules.conf.example
@@ -438,6 +438,9 @@
 # CHGHOST module: Adds the /CHGHOST command
 # This module is oper-only.
 # To use, CHGHOST must be in one of your oper class blocks.
+# NOTE: Services will not be able to set vhosts on users if this module
+# isn't loaded. If you're planning on running services, you probably
+# want to load this.
 #<module name="m_chghost.so">
 #
 #-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST  CONFIGURATION #-#-#-#-#-#-#-#-#
@@ -648,6 +651,12 @@
 # than the auditorium mode. Only channel ops may set the +D mode.
 #<module name="m_delayjoin.so">
 
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Delay message module: Adds the channel mode +d which disallows a user
+# from talking in the channel unless they've been joined for X seconds.
+# Settable a la: /mode +d 30
+#<module name="m_delaymsg.so>
+
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Deny Channels: Deny Channels from being used by users
 #<module name="m_denychans.so"> 
@@ -718,10 +727,6 @@
 #                                                                     #
 #<include file="filter.conf">
 
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Foobar module: does nothing - historical relic
-#<module name="m_foobar.so">
-
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Gecosban: Implements extended ban r:, which stops anyone matching
 # a mask like +b r:*realname?here* from joining a channel.
@@ -731,6 +736,9 @@
 # GeoIP module: Allows the server admin to ban users by country code.
 # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp
 # and run make install, then uncomment this module to enable it.
+# This module requires GeoIP to be installed on your system,
+# use your package manager to find the appropriate packages
+# or check the InspIRCd wiki page for this module.
 #<module name="m_geoip.so">
 #
 #-#-#-#-#-#-#-#-#-#-#-#  GEOIP CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#-#
@@ -878,7 +886,7 @@
 # opers are still able to see invisible users, and if an oper with +Q
 # deopers, they will become visible. 
 #
-# This module is oper-only.
+# This module is oper-only and seen by many to be quite abusive.
 #
 #<module name="m_invisible.so">
 
@@ -1081,19 +1089,27 @@
 #<module name="m_nonotice.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper channels mode: Adds the +O channel mode
-# This module is oper-only.
-#<module name="m_operchans.so">
+# Network buisness join module
+# Allows an oper to join a channel using /OJOIN, giving them +Y on the
+# channel which makes them immune to kick/deop/etc.
+#<module name="m_ojoin.so">
+#
+#<ojoin prefix="!" notice="yes" op="yes">
+# Specify the prefix that +Y will grant here
+# Leave prefix empty if you do not wish +Y to grant a prefix
+# If notice is set to on, upon ojoin, the server will notice
+# the channel saying that the oper is joining on network business
+# If op is set to on, it will give them +o along with +Y
+
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper invex/extban module: Adds +beI type O, to ban, exempt, and invex
-# given oper type masks.
+# Oper channels mode: Adds the +O channel mode and +beI type O:<mask>
+# to ban, exempt, and invex given oper type masks.
 # e.g, /mode #channel +iI O:* is equivilant to chmode +O, but you
 # may also, e.g. /mode #channel +iI O:AdminTypeOnly to only allow admins.
 # +be work in a similar fashion.
-# This module is oper-only.
 #
-#<module name="m_operinvex.so">
+#<module name="m_operchans.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Oper Join module: Auto-joins opers to a channel upon oper-up
@@ -1203,6 +1219,15 @@
 # This module is oper-only.
 #<module name="m_permchannels.so">
 #
+# If you like, m_permchannels can write a config file of permanent channels
+# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
+# If you want to do this, set the filename below, and uncomment the include.
+#
+# The conf file generated has a path relative to the inspircd binary, hence '../conf/'.
+#
+#<permchanneldb filename="../conf/permchannels.conf">
+#<include file="permchannels.conf">
+#
 # You may also create channels on startup by using the <permchannels> block.
 #<permchannels channel="#opers" modes="is" topic="Opers only.">
 
@@ -1279,6 +1304,9 @@
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Registered users only channel creation
 # Allows only registered users and opers to create new channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
 #<module name="m_regonlycreate.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1287,11 +1315,17 @@
 #<module name="m_remove.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels
+# Restricted channels module: Allows only opers to create channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
 #<module name="m_restrictchans.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict message module: Allows users to only message opers
+# Restrict message module: Allows users to only message opers.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
 #<module name="m_restrictmsg.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1327,27 +1361,6 @@
 # RPC test module: A test of the RPC API
 #<module name="m_rpctest.so">
 
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Provide /LIST throttling (to prevent flooding) and /LIST safety to
-# prevent excess flood when the list is large.
-#<module name="m_safelist.so">
-#
-#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# When using Safelist, you may set the following values;
-#
-# The first value, 'throttle', sets the amount of time in seconds a user
-# must wait between LIST commands. For example, if this is set to 60
-# (the default) then the user may not /LIST more than once a minute.
-# If not defined, the default value is 60 seconds.
-#
-# The second value, 'maxlisters', indicates the maximum number of users
-# which may be retrieving a LIST at once. It is not recommended you raise
-# this value, as increasing it too high can make your network vulnerable
-# to floodbots which waste your bandwidth and CPU time with LIST requests.
-#
-#<safelist throttle="60" maxlisters="50">
-
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # SAJOIN module: Adds the /SAJOIN command
 # This module is oper-only.
@@ -1666,15 +1679,10 @@
 #<module name="m_swhois.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Taxonomy module: Adds the /TAXONOMY command, used to view all
-#                  metadata attached to a user.
-# This module is oper-only.
-# To use, TAXONOMY must be in one of your oper class blocks.
-#<module name="m_taxonomy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test command module: Does nothing significant. Read: pointless.
-#<module name="m_testcommand.so">
+# Test module: enable this to create a command useful in testing
+# flood control. To avoid accidental use on live networks, the server
+# name must contain ".test" to load the module
+#<module name="m_testnet.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Timed bans module: Adds timed channel bans and the /TBAN command
@@ -1753,8 +1761,8 @@
 #
 #<module name="m_ziplink.so">
 #
-# To use this module, you must enable it as a transport type in your
-# <link> tags or <bind> tags using the transport name 'zip'.
+# To use this module, you must enable it as a ssl type in your
+# <link> tags or <bind> tags using the ssl name 'ziplinks'.
 # See the documentation of <link> and <bind>, respectively.
 #