X-Git-Url: https://git.netwichtig.de/gitweb/?a=blobdiff_plain;f=conf%2Fmodules.conf.example;h=c1796ce03febfc8dbf8293df29833a965b0ce3ac;hb=c64333e02a4449616683e672739526f4cc762101;hp=5dcff4117a67c449c348fb52d5e58b3afaa9272c;hpb=e4c8a90f85eae05e88d8c3ff1cb839f4882e5fcb;p=user%2Fhenk%2Fcode%2Finspircd.git diff --git a/conf/modules.conf.example b/conf/modules.conf.example index 5dcff4117..c1796ce03 100644 --- a/conf/modules.conf.example +++ b/conf/modules.conf.example @@ -10,7 +10,7 @@ # # # By default, ALL modules are commented out. You must uncomment them # # or add lines to your config to load modules. Please refer to # -# http://www.inspircd.org/wiki/Modules_List for a list of modules and# +# http://wiki.inspircd.org/Modules for a list of modules and # # each modules link for any additional conf tags they require. # # # # You may use wildcards in a tag to load all modules which # @@ -71,6 +71,17 @@ # Alias module: Allows you to define server-side command aliases # # +# Fantasy settings: +# +# +# +# prefix: +# Set the prefix for in-channel aliases (fantasy commands) to the +# specified character. If not set, the default is "!". +# allowbots: +# If this is set to no, +B clients will not be able to use fantasy +# commands. If not set, the default is no. +# #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # If you have the m_alias.so module loaded, you may also define # @@ -86,6 +97,14 @@ # matched, or it has no format value. Aliases are # # read from the top of the file to the bottom. # # # +# usercommand - If this is true, the alias can be run simply as # +# /aliasname. Defaults to true. # +# # +# channelcommand - If this is true, the alias can be used as an # +# in-channel alias or 'fantasy command', prefixed # +# by the fantasy prefix character, !aliasname by # +# default. Defaults to false. # +# # # format - If this is defined, the parameters of the alias # # must match this glob pattern. For example if you # # want the first parameter to start with a # for # @@ -132,9 +151,15 @@ # # # +# +# +# # # # +# +# +# # # An example of using the format value to create an alias with two # different behaviours depending on the format of the parameters. @@ -152,6 +177,18 @@ # # +# +# You may also add aliases to trigger based on something said in a +# channel, aka 'fantasy' commands, configured in the same manner as any +# other alias, with usercommand="no" and channelcommand="yes" The +# command must be preceded by the fantasy prefix when used. +# +# +# +# This would be used as "!cs ", with the channel +# being automatically inserted after the command in the message to +# ChanServ, assuming the fantasy prefix is "!". #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Allowinvite module: Gives channel mode +A to allow all users to use @@ -287,7 +324,7 @@ # # # Optional - If you specify to use the m_censor module, then you must # # specify some censor tags. See also: # -# http://www.inspircd.org/wiki/Censor_Module # +# http://wiki.inspircd.org/Modules/censor # # # @@ -301,7 +338,7 @@ # Optional - If you specify to use m_cgiirc, then you must specify one # or more cgihost tags which indicate authorised CGI:IRC servers which # will be connecting to your network, and an optional cgiirc tag. -# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module +# For more information see: http://wiki.inspircd.org/Modules/cgiirc # # Set to yes if you want to notice opers when CGI clients connect # @@ -315,7 +352,7 @@ # # Get IP from ident # # See the docs # New style: -# # Get IP from WEBIRC # # IMPORTANT NOTE: @@ -343,6 +380,10 @@ # Channel filter module: Allows channel-op defined message # filtering using simple string matches (channel mode +g) # +# +# If hidemask is set to yes, the user will not be shown the mask when +# his/her message is blocked. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel logging module: used to send snotice output to channels, to @@ -364,8 +405,8 @@ # + deprotectothers="yes"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -401,6 +438,9 @@ # CHGHOST module: Adds the /CHGHOST command # This module is oper-only. # To use, CHGHOST must be in one of your oper class blocks. +# NOTE: Services will not be able to set vhosts on users if this module +# isn't loaded. If you're planning on running services, you probably +# want to load this. # # #-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-# @@ -534,7 +574,7 @@ # over whole ISPs/blocks of IPs, which may be needed to prevent attacks. # # -# This allows for 10 quits in an hour with a 10 minute ban if that is exceeded. +# This allows for 10 connections in an hour with a 10 minute ban if that is exceeded. # # @@ -567,12 +607,15 @@ #-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # name - The username used to identify # password - The password used to identify +# hash - The hash for the specific user's password (optional) +# m_password_hash.so and a hashing module must be loaded for this to work # host - Allowed hostmask [optional] # title - Title shown in whois # vhost - Displayed host [optional] # # #<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat"> +#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DCCALLOW module: Adds the /DCCALLOW command @@ -645,7 +688,7 @@ #<module name="m_dnsbl.so"> # # # # For configuration options please see the wiki page for m_dnsbl at # -# http://inspircd.org/wiki/DNS_Blacklist_Module # +# http://wiki.inspircd.org/Modules/dnsbl # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Filter module: Provides message filtering, similar to SPAMFILTER. @@ -667,6 +710,9 @@ # # # Your choice of regex engine must match on all servers network-wide. # +# You may specify specific channels that are exempt from being filtered: +#<exemptfromfilter channel="#blah"> +# #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the m_filter module, then # @@ -688,6 +734,9 @@ # GeoIP module: Allows the server admin to ban users by country code. # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp # and run make install, then uncomment this module to enable it. +# This module requires GeoIP to be installed on your system, +# use your package manager to find the appropriate packages +# or check the InspIRCd wiki page for this module. #<module name="m_geoip.so"> # #-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# @@ -753,7 +802,7 @@ #-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # Optional - If you choose to use the m_hostchange.so module. # -# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module # +# Config Help - See http://wiki.inspircd.org/Modules/hostchange # # # #<host suffix="polarbears.org" separator="." prefix=""> #<hostchange mask="*@fbi.gov" action="addnick"> @@ -807,11 +856,6 @@ # http stats module: Provides basic stats pages over HTTP # Requires m_httpd.so to be loaded for it to function. #<module name="m_httpd_stats.so"> -# -#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-# -# -#<httpstats stylesheet="http://remote.style/sheet.css"> -# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ident: Provides RFC 1413 ident lookup support @@ -828,7 +872,7 @@ # the user in a 'connecting' state until the lookup is complete. # # The bind value indicates which IP to bind outbound requests to. # # # -#<ident timeout="5" bind=""> +#<ident timeout="5"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Invite except module: Adds support for channel invite exceptions (+I) @@ -839,11 +883,8 @@ # oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that # opers are still able to see invisible users, and if an oper with +Q # deopers, they will become visible. -# -# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you -# must first add the value canquiet="yes" to that oper's type tag. # -# This module is oper-only. +# This module is oper-only and seen by many to be quite abusive. # #<module name="m_invisible.so"> @@ -914,6 +955,26 @@ # need defining, otherwise they should be set similar to the examples # # above. # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# LDAP oper configuration module: Adds the ability to authenticate # +# opers via LDAP. This is an extra module which must be enabled # +# explicitly by symlinking it from modules/extra, and requires the # +# OpenLDAP libs. Re-run configure with: ./configure --enable-extras=m_ldapoper.cpp +# and run make install, then uncomment this module to enable it. # +# # +#<module name="m_ldapoper.so"> +# # +# Configuration: # +# # +# <ldapoper baserdn="ou=People,dc=brainbox,dc=cc" +# server="ldap://brainwave.brainbox.cc" +# searchscope="subtree" +# binddn="cn=Manager,dc=brainbox,dc=cc" +# bindauth="mysecretpass"> +# # +# Available configuration items are identical to the same items in # +# m_ldapauth above. # + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is # # used to temporarily close/open for new connections to the server. # @@ -927,6 +988,12 @@ # #<module name="m_lockserv.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Map hiding module: replaces /MAP and /LINKS output to users with a # +# message to see a website, set by maphide="http://link.to/site" in # +# the security tag, instead. # +#<module name="m_maphide.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Msg flood module: Adds message/notice flood protection (+f) #<module name="m_messageflood.so"> @@ -943,7 +1010,7 @@ #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_mssql.so is more complex than described here, see wiki for more # -# info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module # +# info http://wiki.inspircd.org/Modules/mssql # # #<database name="db" username="user" password="pass" hostname="localhost" id="db1"> @@ -959,7 +1026,7 @@ #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_mysql.so is more complex than described here, see the wiki for # -# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module # +# more: http://wiki.inspircd.org/Modules/mysql # # #<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2"> @@ -969,6 +1036,17 @@ # This is supported by mIRC, x-chat, klient, and maybe more. #<module name="m_namesx.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# National characters module: +# 1) Allows using national characters in nicknames. +# 2) Allows using custom (national) casemapping over the network. +# file -- filename of existing file in "locales" directory +# casemapping -- custom value for 005 numeric (if you want it to be +# different from the filename. +# +#<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink"> +#<module name="m_nationalchars.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nickchange flood protection module: Allows up to X nick changes in Y seconds. # Provides channel mode +F. @@ -982,11 +1060,13 @@ #<module name="m_nicklock.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No ctcp module: Adds the channel mode +C to block CTCPs +# No ctcp module: Adds the channel mode +C to block CTCPs and extban C +# to block CTCPs sent by specific users. #<module name="m_noctcp.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No kicks module: Adds the +Q channel mode +# No kicks module: Adds the +Q channel mode and the Q: extban to deny +# certain users from kicking. #<module name="m_nokicks.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -997,7 +1077,13 @@ #<module name="m_nonicks.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No Notice module: adds the channel mode +T +# No part message module: adds extban 'p' to block part messages from # +# matching users. # +#<module name="m_nopartmsg.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# No Notice module: adds the channel mode +T and the extban T to block +# specific users from noticing the channel. #<module name="m_nonotice.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1005,11 +1091,6 @@ # This module is oper-only. #<module name="m_operchans.so"> -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper flood module: Removes flood limits from users upon opering up -# This module is oper-only. -#<module name="m_operflood.so"> - #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper invex/extban module: Adds +beI type O, to ban, exempt, and invex # given oper type masks. @@ -1048,6 +1129,15 @@ # This module is oper-only. #<module name="m_operlog.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Oper prefixing module: Gives IRC operators a prefix status character +# on all channels they are in. +# +#<module name="m_operprefix.so"> +# +# You may additionally customise the prefix character. +#<operprefix prefix="!"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper MOTD module: Provides support for seperate message of the day # on oper-up @@ -1058,7 +1148,10 @@ # # # If you are using the m_opermotd.so module, specify the motd here # # # -#<opermotd file="oper.motd"> +# onoper - Should the message be sent on /OPER or only when # +# /OPERMOTD is used. Use "yes" or "no". # +# # +#<opermotd file="oper.motd" onoper="yes"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Override module: Adds support for oper override @@ -1068,7 +1161,7 @@ #-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # m_override.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/Oper_Override_Module # +# http://wiki.inspircd.org/Modules/override # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper levels module: Gives each oper a level and prevents @@ -1131,7 +1224,7 @@ #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_pgsql.so is more complex than described here, see the wiki for # -# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module # +# more: http://wiki.inspircd.org/Modules/pgsql # # #<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no"> @@ -1192,6 +1285,9 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Registered users only channel creation # Allows only registered users and opers to create new channels. +# +# You probably *DO NOT* want to load this module on a public network. +# #<module name="m_regonlycreate.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1200,17 +1296,17 @@ #<module name="m_remove.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restrict banned users module: -# Disallows banned users on a channel from messaging the channel, -# changing nick, or changing the topic, if loaded. -#<module name="m_restrictbanned.so"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restricted channels module: Allows only opers to create channels +# Restricted channels module: Allows only opers to create channels. +# +# You probably *DO NOT* want to load this module on a public network. +# #<module name="m_restrictchans.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restrict message module: Allows users to only message opers +# Restrict message module: Allows users to only message opers. +# +# You probably *DO NOT* want to load this module on a public network. +# #<module name="m_restrictmsg.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1273,6 +1369,12 @@ # To use, SAJOIN must be in one of your oper class blocks. #<module name="m_sajoin.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SAKICK module: Adds the /SAKICK command +# This module is oper-only. +# To use, SAKICK must be in one of your oper class blocks. +#<module name="m_sakick.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAMODE module: Adds the oper /SAMODE command # This module is oper-only. @@ -1297,6 +1399,12 @@ # To use, SAQUIT must be in one of your oper class blocks. #<module name="m_saquit.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SATOPIC module: Adds the oper /SATOPIC command +# This module is oper-only. +# To use, SATOPIC must be in one of your oper class blocks. +#<module name="m_satopic.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SASL authentication module: Provides support for IRC Authentication # Layer (aka: atheme SASL) via AUTHENTICATE. @@ -1338,30 +1446,21 @@ # To use, SETIDLE must be in one of your oper class blocks. #<module name="m_setidle.so"> -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Services support module: Adds several usermodes such as +R and +M -# this module implements the 'identified' state via user mode +r, which -# is similar to the DALnet and dreamforge systems. -# -# N O T E!! -# >> This CAN NOT be used at the same time as m_services_account << -# N O T E!! -# *** This module DOES NOT support Atheme services, please use *** -# *** m_services_account if you are planning on using Atheme. *** -#<module name="m_services.so"> - #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Services support module: Adds several usermodes such as +R and +M # this module implements the 'identified' state via account names (AC) # and is similar in operation to the way asuka and ircu handle services. # +# At the same time, this offers +r for users and channels to mark them +# as identified seperately from the idea of a master account, which +# can be useful for services which are heavily nick-as-account centric. +# +# This replaces m_services from 1.1 and earlier. +# # Also of note is that this module implements two extbans: # +b R: (stop matching account names from joining) # +b M: (stop matching account names from speaking) # -# N O T E!! -# >> This CAN NOT be used at the same time as m_services << -# N O T E!! #<module name="m_services_account.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1415,8 +1514,10 @@ # perform. It should be noted that if a shunned user issues QUIT or PART # then their message will be removed, as if they did not issue one. # -# You may also (optionally) let the user know that their command was blocked. -#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes"> +# You can (optionally) let the user know that their command was blocked. +# +# You may also let SHUN affect opers (defaults to no). +#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Spy module: Provides the ability to see the complete names list of @@ -1429,13 +1530,6 @@ # does not do anything useful without a working SSL module (see below) #<module name="m_sslmodes.so"> -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Dummy ssl module: If you have other servers on your network which -# have SSL, but your server does not have ssl enabled, you should load -# this module, which will handle SSL metadata (e.g. the "Is using ssl" -# field in the WHOIS information). -#<module name="m_ssl_dummy.so"> - #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GnuTLS ssl module: Adds support for client-server SSL using GnuTLS, # if enabled. You must copy the source for this module from the directory @@ -1446,7 +1540,7 @@ #-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_ssl_gnutls.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/GnuTLS_SSL_Module # +# http://wiki.inspircd.org/Modules/ssl_gnutls # # # # NOTE: If you want to use this module to encrypt and sign your # # server to server traffic, you MUST load it before m_spanningtree in # @@ -1456,10 +1550,14 @@ # SSL Info module: Allows users to retrieve information about other # user's peer SSL certificates and keys. This can be used by client # scripts to validate users. For this to work, one of m_ssl_gnutls.so -# or m_ssl_openssl.so must be loaded. You must symlink the source for -# this module from the directory src/modules/extra. -# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sslinfo.cpp -# and run make install, then uncomment this module to enable it. +# or m_ssl_openssl.so must be loaded. This module also adds the +# "* <user> is using a secure connection" whois line, the ability for +# opers to use SSL fingerprints to verify their identity and the ability +# to force opers to use SSL connections in order to oper up. +# It is highly recommended to load this module especially if +# you use SSL on your network. +# For how to use the oper features, please see the first example <oper> tag +# in opers.conf.example. # #<module name="m_sslinfo.so"> @@ -1473,22 +1571,12 @@ #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_ssl_openssl.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/OpenSSL_SSL_Module # +# http://wiki.inspircd.org/Modules/ssl_openssl # # # # NOTE: If you want to use this module to encrypt and sign your # # server to server traffic, you MUST load it before m_spanningtree in # # your configuration file! # -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SSL Cert Oper module: Allows opers to oper up using the key fingerprint -# stored within their SSL certificate and key pair. -# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must -# be loaded. An extra value should be added to enabled opers, which -# is in the following format: fingerprint="<hash>". For more information, -# see the example in the oper blocks. -# This module is oper-only. -#<module name="m_ssl_oper_cert.so"> - #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Strip colour module: Adds the channel mode +S #<module name="m_stripcolor.so"> @@ -1516,7 +1604,7 @@ #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # m_sqlite.so is more complex than described here, see the wiki for # -# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module # +# more: http://wiki.inspircd.org/Modules/sqlite3 # # #<database hostname="/full/path/to/database.db" id="anytext"> @@ -1544,7 +1632,7 @@ #-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # m_sqlauth.so is too complex it describe here, see the wiki: # -# http://www.inspircd.org/wiki/SQL_Authentication_Module # +# http://wiki.inspircd.org/Modules/sqlauth # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL logging module: Allows you to log network-wide data for your @@ -1559,7 +1647,7 @@ # # # dbid - Database ID to use (see m_sql) # # # -# See also: http://www.inspircd.org/wiki/SQL_Logging_Module # +# See also: http://wiki.inspircd.org/Modules/sqllog # # # #<sqllog dbid="1"> @@ -1577,7 +1665,7 @@ # dbid - Database ID to use (see m_sql) # # hash - Hashing provider to use for password hashing # # # -# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module # +# See also: http://wiki.inspircd.org/Modules/sqloper # # # #<sqloper dbid="1" hash="md5"> @@ -1604,9 +1692,7 @@ #<module name="m_testcommand.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Timed bans module: Adds timed bans and the /TBAN command -# This module is oper-only. -# To use, TBAN must be in one of your oper class blocks. +# Timed bans module: Adds timed channel bans and the /TBAN command #<module name="m_timedbans.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1646,10 +1732,14 @@ # user - Username for the vhost. # # # # pass - Password for the vhost. # +# # +# hash - The hash for the specific user (optional) +# m_password_hash.so and a hashing module must be loaded for this to work # # # host - Vhost to set. # # #<vhost user="some_username" pass="some_password" host="some.host"> +#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Watch module: Adds the WATCH command, which is used by clients to