X-Git-Url: https://git.netwichtig.de/gitweb/?a=blobdiff_plain;f=conf%2Fmodules.conf.example;h=c1796ce03febfc8dbf8293df29833a965b0ce3ac;hb=c64333e02a4449616683e672739526f4cc762101;hp=a24db40db7871fbb0da3dbe78d2e561f7007cfeb;hpb=3372b1ac0db7611f3936bbc6f77d43ca7a2c6736;p=user%2Fhenk%2Fcode%2Finspircd.git

diff --git a/conf/modules.conf.example b/conf/modules.conf.example
index a24db40db..c1796ce03 100644
--- a/conf/modules.conf.example
+++ b/conf/modules.conf.example
@@ -151,9 +151,15 @@
 #<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
 #<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
 #<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
+#<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
+#<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
 #<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
 #<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
 #<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
+#<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
+#<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
 #
 # An example of using the format value to create an alias with two
 # different behaviours depending on the format of the parameters.
@@ -432,6 +438,9 @@
 # CHGHOST module: Adds the /CHGHOST command
 # This module is oper-only.
 # To use, CHGHOST must be in one of your oper class blocks.
+# NOTE: Services will not be able to set vhosts on users if this module
+# isn't loaded. If you're planning on running services, you probably
+# want to load this.
 #<module name="m_chghost.so">
 #
 #-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST  CONFIGURATION #-#-#-#-#-#-#-#-#
@@ -725,6 +734,9 @@
 # GeoIP module: Allows the server admin to ban users by country code.
 # This modules is in extras. Re-run configure with: ./configure --enable-extras=m_geoip.cpp
 # and run make install, then uncomment this module to enable it.
+# This module requires GeoIP to be installed on your system,
+# use your package manager to find the appropriate packages
+# or check the InspIRCd wiki page for this module.
 #<module name="m_geoip.so">
 #
 #-#-#-#-#-#-#-#-#-#-#-#  GEOIP CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#-#
@@ -872,7 +884,7 @@
 # opers are still able to see invisible users, and if an oper with +Q
 # deopers, they will become visible. 
 #
-# This module is oper-only.
+# This module is oper-only and seen by many to be quite abusive.
 #
 #<module name="m_invisible.so">
 
@@ -1273,6 +1285,9 @@
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Registered users only channel creation
 # Allows only registered users and opers to create new channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
 #<module name="m_regonlycreate.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1281,11 +1296,17 @@
 #<module name="m_remove.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels
+# Restricted channels module: Allows only opers to create channels.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
 #<module name="m_restrictchans.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict message module: Allows users to only message opers
+# Restrict message module: Allows users to only message opers.
+#
+# You probably *DO NOT* want to load this module on a public network.
+#
 #<module name="m_restrictmsg.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1509,13 +1530,6 @@
 # does not do anything useful without a working SSL module (see below)
 #<module name="m_sslmodes.so">
 
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Dummy ssl module: If you have other servers on your network which
-# have SSL, but your server does not have ssl enabled, you should load
-# this module, which will handle SSL metadata (e.g. the "Is using ssl"
-# field in the WHOIS information).
-#<module name="m_ssl_dummy.so">
-
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
 # if enabled. You must copy the source for this module from the directory
@@ -1536,10 +1550,14 @@
 # SSL Info module: Allows users to retrieve information about other
 # user's peer SSL certificates and keys. This can be used by client
 # scripts to validate users. For this to work, one of m_ssl_gnutls.so
-# or m_ssl_openssl.so must be loaded. You must symlink the source for
-# this module from the directory src/modules/extra.
-# This modules is in extras. Re-run configure with: ./configure --enable-extras=m_sslinfo.cpp
-# and run make install, then uncomment this module to enable it.
+# or m_ssl_openssl.so must be loaded. This module also adds the 
+# "* <user> is using a secure connection" whois line, the ability for
+# opers to use SSL fingerprints to verify their identity and the ability
+# to force opers to use SSL connections in order to oper up.
+# It is highly recommended to load this module especially if
+# you use SSL on your network.
+# For how to use the oper features, please see the first example <oper> tag
+# in opers.conf.example.
 #
 #<module name="m_sslinfo.so">
 
@@ -1559,16 +1577,6 @@
 # server to server traffic, you MUST load it before m_spanningtree in #
 # your configuration file!                                            #
 
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
-# stored within their SSL certificate and key pair.
-# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
-# be loaded. An extra value should be added to enabled opers, which
-# is in the following format: fingerprint="<hash>". For more information,
-# see the example in the oper blocks.
-# This module is oper-only.
-#<module name="m_ssl_oper_cert.so">
-
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Strip colour module: Adds the channel mode +S
 #<module name="m_stripcolor.so">