X-Git-Url: https://git.netwichtig.de/gitweb/?a=blobdiff_plain;f=docs%2Fconf%2Finspircd.conf.example;h=8091ec5dec89ccb5dc2d945427f87d554e761824;hb=bd6e75ffa1a9827aa135e313eca4e5b396ebda2f;hp=33f45535770eeddc07b5dab7a377492da65c9510;hpb=489ba0ad54bf6bdd80d5f539f67f03241ddfe77b;p=user%2Fhenk%2Fcode%2Finspircd.git diff --git a/docs/conf/inspircd.conf.example b/docs/conf/inspircd.conf.example index 33f455357..8091ec5de 100644 --- a/docs/conf/inspircd.conf.example +++ b/docs/conf/inspircd.conf.example @@ -62,7 +62,7 @@ # # # # # Executable include example: # -# +# # # @@ -97,8 +97,7 @@ #id="97K" # network: Network name given on connect to clients. - # Should be the same on all servers on the network and - # not contain spaces. + # Should be the same on all servers on the network. network="Omega"> @@ -152,15 +151,18 @@ # to this bind section. type="clients" - # ssl: If you want the port(s) in this bind tag to use SSL, set this - # to either "gnutls" or "openssl". The appropriate SSL module must be - # loaded for SSL to work. If you do not want the port(s) in this bind - # tag to support SSL, just remove or comment out this option. + # ssl: If you want the port(s) in this bind tag to use SSL, set this to + # the name of a custom tag that you have defined or one + # of "openssl", "gnutls", "mbedtls" if you have not defined any. See the + # docs page for the SSL module you are using for more details. + # + # You will need to load the ssl_openssl module for OpenSSL, ssl_gnutls + # for GnuTLS and ssl_mbedtls for mbedTLS. ssl="gnutls" # defer: When this is non-zero, connections will not be handed over to # the daemon from the operating system before data is ready. - # In Linux, the value indicates the number of seconds we'll wait for a + # In Linux, the value indicates the time period we'll wait for a # connection to come up with data. Don't set it too low! # In BSD the value is ignored; only zero and non-zero is possible. # Windows ignores this parameter completely. @@ -168,45 +170,40 @@ # To change it on a running bind, you'll have to comment it out, # rehash, comment it in and rehash again. defer="0" + + # free: When this is enabled the listener will be created regardless of + # whether the interface that provides the bind address is available. This + # is useful for if you are starting InspIRCd on boot when the server may + # not have brought the network interfaces up yet. + free="no" > -# When linking servers, the OpenSSL and GnuTLS implementations are completely -# link-compatible and can be used alongside each other -# on each end of the link without any significant issues. -# Supported SSL types are: "openssl" and "gnutls". -# You must load the ssl_openssl module for OpenSSL or ssl_gnutls for GnuTLS. - - - - - -#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#- -# # -# You can configure the passwords here which you wish to use for # -# the /DIE and /RESTART commands. Only trusted ircops who will # -# need this ability should know the die and restart password. # -# # +# Listener accepting HTML5 WebSocket connections. +# Requires the websocket module and SHA-1 hashing support (provided by the sha1 +# module). +# - - #hash="sha256" +# EXPERIMENTAL: Listener that binds on a UNIX endpoint instead of a TCP/IP endpoint: +# - # diepass: Password for opers to use if they need to shutdown (die) - # a server. - diepass="" +# You can define a custom tag which defines the SSL configuration +# for this listener. See the docs page for the SSL module you are using for +# more details. +# +# Alternatively, you can use one of the default SSL profiles which are created +# when you have not defined any: +# "openssl" (requires the ssl_openssl module) +# "gnutls" (requires the ssl_gnutls module) +# "mbedtls" (requires the ssl_mbedtls module) +# +# When linking servers, the OpenSSL, GnuTLS, and mbedTLS implementations are +# completely link-compatible and can be used alongside each other on each end +# of the link without any significant issues. - # restartpass: Password for opers to use if they need to restart - # a server. - restartpass=""> + + #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# @@ -219,7 +216,7 @@ # -- It is important to note that connect tags are read from the -- # # TOP DOWN. This means that you should have more specific deny # # and allow tags at the top, progressively more general, followed # -# by a (should you wish to have one). # # # # Connect blocks are searched twice for each user - once when the TCP # # connection is accepted, and once when the user completes their # @@ -247,15 +244,19 @@ # you only want to adjust sendq and a password parent="main" - # allow: What IP addresses/hosts to allow for this block. + # allow: The IP address or hostname of clients that can use this + # class. You can specify either an exact match, a glob match, or + # a CIDR range here. allow="203.0.113.*" - # hash: what hash this password is hashed with. requires the module - # for selected hash (md5, sha256 or ripemd160) be loaded and the - # password hashing module (password_hash) loaded. - # Optional, but recommended. Create hashed passwords with: - # /mkpasswd - #hash="sha256" + # hash: the hash function this password is hashed with. Requires the + # module for the selected function (bcrypt, md5, sha1, or sha256) and + # the password hashing module (password_hash) to be loaded. + # + # You may also use any of the above other than bcrypt prefixed with + # either "hmac-" or "pbkdf2-hmac-" (requires the pbkdf2 module). + # Create hashed passwords with: /MKPASSWD + #hash="bcrypt" # password: Password to use for this block/user(s) password="secret" @@ -264,11 +265,11 @@ # be in at one time. maxchans="20" - # timeout: How long (in seconds) the server will wait before - # disconnecting a user if they do not do anything on connect. + # timeout: How long the server will wait before disconnecting + # a user if they do not do anything on connect. # (Note, this is a client-side thing, if the client does not - # send /nick, /user or /pass) - timeout="10" + # send /NICK, /USER or /PASS) + timeout="20" # localmax: Maximum local connections per IP (or CIDR mask, see below). localmax="3" @@ -290,61 +291,82 @@ # useident: Defines if users in this class MUST respond to a ident query or not. useident="no" + # webirc: Restricts usage of this class to the specified WebIRC gateway. + # This setting only has effect when the cgiirc module is loaded. + #webirc="name" + # limit: How many users are allowed in this class limit="5000" - # modes: Usermodes that are set on users in this block on connect. + # modes: User modes that are set on users in this block on connect. # Enabling this option requires that the conn_umodes module be loaded. - # This entry is highly recommended to use for/with IP Cloaking/masking. - # For the example to work, this also requires that the "cloaking" + # This entry is highly recommended to use for/with IP cloaking/masking. + # For the example to work, this also requires that the cloaking # module be loaded as well. modes="+x" - # requireident, requiressl, requireaccount: require that users of this - # block have a valid ident response, use SSL, or have authenticated. - # Requires ident, sslinfo, or the services_account module, respectively. - requiressl="on" - # NOTE: For requireaccount, you must complete the signon prior to full - # connection. Currently, this is only possible by using SASL - # authentication; passforward and PRIVMSG NickServ happen after - # your final connect block has been found. + # requireident: Require that users of this block have a valid ident response. + # Requires the ident module to be loaded. + #requireident="yes" + + # requiressl: Require that users of this block use an SSL connection. + # This can also be set to "trusted", as to only accept certificates + # issued by a certificate authority that you can configure in the + # settings of the SSL module that you're using. + # Requires the sslinfo module to be loaded. + #requiressl="yes" + + # requireaccount: Require that users of this block have authenticated to a + # services account. + # NOTE: You must complete the signon prior to full connection. Currently, + # this is only possible by using SASL authentication; passforward + # and PRIVMSG NickServ happen after your final connect block has been found. + # Requires the services_account module to be loaded. + #requireaccount="yes" # Alternate MOTD file for this connect class. The contents of this file are # specified using <files secretmotd="filename"> or <execfiles ...> + # + # NOTE: the following escape sequences for IRC formatting characters can be + # used in your MOTD: + # Bold: \b + # Color: \c<fg>[,<bg>] + # Italic: \i + # Monospace: \m (not widely supported) + # Reset: \x + # Reverse: \r + # Strikethrough: \s (not widely supported) + # Underline: \u + # See https://defs.ircdocs.horse/info/formatting.html for more information + # on client support for formatting characters. motd="secretmotd" - # Allow color codes to be processed in the message of the day file. - # the following characters are valid color code escapes: - # \002 or \b = Bold - # \037 or \u = Underline - # \003 or \c = Color (with a code postfixed to this char) - # \017 or \x = Stop all color sequences - allowmotdcolors="false" - - # port: What port this user is allowed to connect on. (optional) - # The port MUST be set to listen in the bind blocks above. - port="6697"> + # port: What port range this user is allowed to connect on. (optional) + # The ports MUST be set to listen in the bind blocks above. + port="6697,9999"> <connect # name: Name to use for this connect block. Mainly used for # connect class inheriting. name="main" - # allow: What IP addresses/hosts to allow for this block. + # allow: The IP address or hostname of clients that can use this + # class. You can specify either an exact match, a glob match, or + # a CIDR range here. allow="*" # maxchans: Maximum number of channels a user in this class # be in at one time. maxchans="20" - # timeout: How long (in seconds) the server will wait before - # disconnecting a user if they do not do anything on connect. + # timeout: How long the server will wait before disconnecting + # a user if they do not do anything on connect. # (Note, this is a client-side thing, if the client does not - # send /nick, /user or /pass) - timeout="10" + # send /NICK, /USER or /PASS) + timeout="20" - # pingfreq: How often (in seconds) the server tries to ping connecting clients. - pingfreq="120" + # pingfreq: How often the server tries to ping connecting clients. + pingfreq="2m" # hardsendq: maximum amount of data allowed in a client's send queue # before they are dropped. Keep this value higher than the length of @@ -355,11 +377,11 @@ # softsendq: amount of data in a client's send queue before the server # begins delaying their commands in order to allow the sendq to drain - softsendq="8192" + softsendq="10240" # recvq: amount of data allowed in a client's queue before they are dropped. - # Entering "8K" is equivalent to "8192", see above. - recvq="8K" + # Entering "10K" is equivalent to "10240", see above. + recvq="10K" # threshold: This specifies the amount of command penalty a user is allowed to have # before being quit or fakelagged due to flood. Normal commands have a penalty of 1, @@ -400,9 +422,9 @@ # limit: How many users are allowed in this class limit="5000" - # modes: Usermodes that are set on users in this block on connect. + # modes: User modes that are set on users in this block on connect. # Enabling this option requires that the conn_umodes module be loaded. - # This entry is highly recommended to use for/with IP Cloaking/masking. + # This entry is highly recommended to use for/with IP cloaking/masking. # For the example to work, this also requires that the cloaking # module be loaded as well. modes="+x"> @@ -416,7 +438,8 @@ # represented as 192.168.1.0/24). This means that abuse across an ISP # # is detected and curtailed much easier. Here is a good chart that # # shows how many IPs the different CIDRs correspond to: # -# http://en.wikipedia.org/wiki/CIDR#Prefix_aggregation # +# https://en.wikipedia.org/wiki/IPv4_subnetting_reference # +# https://en.wikipedia.org/wiki/IPv6_subnetting_reference # # # <cidr @@ -451,7 +474,7 @@ # Example of an executable file include. Note this will be read on rehash, # not when the command is run. -#<execfiles motd="wget -O - http://www.example.com/motd.txt"> +#<execfiles motd="wget -O - https://www.example.com/motd.txt"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # If these values are not defined, InspIRCd uses the default DNS resolver @@ -467,7 +490,7 @@ # # server="127.0.0.1" - # timeout: seconds to wait to try to resolve DNS/hostname. + # timeout: time to wait to try to resolve DNS/hostname. timeout="5"> # An example of using an IPv6 nameserver @@ -485,47 +508,27 @@ #<pid file="/path/to/inspircd.pid"> -#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# +#-#-#-#-#-#-#-#-#-#-#-#-#- LIST MODE LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-# # # -# Use these tags to customise the ban limits on a per channel basis. # -# The tags are read from top to bottom, and any tag found which # -# matches the channels name applies the banlimit to that channel. # +# The <maxlist> tag is used customise the maximum number of each list # +# mode that can be set on a channel. # +# The tags are read from top to bottom and the list mode limit from # +# the first tag found which matches the channel name and mode type is # +# applied to that channel. # # It is advisable to put an entry with the channel as '*' at the # -# bottom of the list. If none are specified or no maxbans tag is # -# matched, the banlist size defaults to 64 entries. # -# # - -<banlist chan="#largechan" limit="128"> -<banlist chan="*" limit="69"> - -#-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# This tag is optional, and specifies one or more features which are # -# not available to non-operators. # -# # -# For example you may wish to disable NICK and prevent non-opers from # -# changing their nicknames. # -# Note that any disabled commands take effect only after the user has # -# 'registered' (e.g. after the initial USER/NICK/PASS on connection) # -# so for example disabling NICK will not cripple your network. # -# # -# You can also define if you want to disable any channelmodes # -# or usermodes from your users. # +# bottom of the list. If none are specified or no maxlist tag is # +# matched, the banlist size defaults to 100 entries. # # # -# `fakenonexistant' will make the ircd pretend that nonexistant # -# commands simply don't exist to non-opers ("no such command"). # -# # -#<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes"> - - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- RTFM LINE -#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# Just remove this... Its here to make you read ALL of the config # -# file options ;) # -<die value="You should probably edit your config *PROPERLY* and try again."> +# Allows #largechan to have up to 200 ban entries. +#<maxlist mode="ban" chan="#largechan" limit="200"> +# Allows #largechan to have up to 200 ban exception entries. +#<maxlist mode="e" chan="#largechan" limit="200"> +# Allows all channels and list modes not previously matched to have +# up to 100 entries. +<maxlist chan="*" limit="100"> #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # @@ -562,6 +565,14 @@ # the correct parameters are. syntaxhints="no" + # casemapping: This sets the case mapping method to be used by the + # server. This MUST be the same on all servers. Possible values are: + # "ascii" (recommended) + # "rfc1459" (default, required for linking to 2.0 servers) + # NOTE: if you are using the nationalchars module this setting will be + # ignored. You should use <nationalchars:casemapping> instead. + casemapping="ascii" + # cyclehostsfromuser: If enabled, the source of the mode change for # cyclehosts will be the user who cycled. This can look nicer, but # triggers anti-takeover mechanisms of some obsolete bots. @@ -585,13 +596,20 @@ # in the topic. If set to no, it will only show the nick of the topic setter. hostintopic="yes" - # pingwarning: If a server does not respond to a ping within x seconds, + # pingwarning: If a server does not respond to a ping within this period, # it will send a notice to opers with snomask +l informing that the server # is about to ping timeout. pingwarning="15" - # serverpingfreq: How often pings are sent between servers (in seconds). - serverpingfreq="60" + # serverpingfreq: How often pings are sent between servers. + serverpingfreq="1m" + + # splitwhois: Whether to split private/secret channels from normal channels + # in WHOIS responses. Possible values for this are: + # 'no' - list all channels together in the WHOIS response regardless of type. + # 'split' - split private/secret channels to a separate WHOIS response numeric. + # 'splitmsg' - the same as split but also send a message explaining the split. + splitwhois="no" # defaultmodes: What modes are set on a empty channel when a user # joins it and it is unregistered. @@ -601,10 +619,47 @@ # banned from the server. xlinemessage="You're banned! Email irc@example.com with the ERROR line below for help." - # exemptchanops: exemptions for channel access restrictions based on prefix. - exemptchanops="nonick:v flood:o" - - # invitebypassmodes: This allows /invite to bypass other channel modes. + # allowzerolimit: If enabled then allow a limit of 0 to be set on channels. + # This is non-standard behaviour and should only be enabled if you need to + # link with servers running 2.0. Defaults to yes. + allowzerolimit="no" + + # exemptchanops: Allows users with with a status mode to be exempt + # from various channel restrictions. Possible restrictions are: + # - anticaps Channel mode +B - blocks messages with too many capital + # letters (requires the anticaps module). + # - auditorium-see Permission required to see the full user list of + # a +u channel (requires the auditorium module). + # - auditorium-vis Permission required to be visible in a +u channel + # (requires the auditorium module). + # - blockcaps Channel mode +B - blocks messages with too many capital + # letters (requires the blockcaps module). + # - blockcolor Channel mode +c - blocks messages with formatting codes + # (requires the blockcolor module). + # - censor Channel mode +G - censors messages based on the network + # configuration (requires the censor module). + # - filter Channel mode +g - blocks messages containing the given + # glob mask (requires the chanfilter module). + # - flood Channel mode +f - kicks (and bans) on text flood of a + # specified rate (requires the messageflood module). + # - nickflood Channel mode +F - blocks nick changes after a specified + # rate (requires the nickflood module). + # - noctcp Channel mode +C - blocks any CTCPs to the channel + # (requires the noctcp module). + # - nonick Channel mode +N - prevents users on the channel from + # changing nicks (requires the nonicks module). + # - nonotice Channel mode +T - blocks /NOTICEs to the channel + # (requires the nonotice module). + # - regmoderated Channel mode +M - blocks unregistered users from + # speaking (requires the services account module). + # - stripcolor Channel mode +S - strips formatting codes from + # messages (requires the stripcolor module). + # - topiclock Channel mode +t - limits changing the topic to (half)ops + # You can also configure this on a per-channel basis with a channel mode. + # See m_exemptchanops in modules.conf.example for more details. + exemptchanops="censor:o filter:o nickflood:o nonick:v regmoderated:o" + + # invitebypassmodes: This allows /INVITE to bypass other channel modes. # (Such as +k, +j, +l, etc.) invitebypassmodes="yes" @@ -642,6 +697,10 @@ # Default value is true clonesonconnect="true" + # timeskipwarn: The time period that a server clock can jump by before + # operators will be warned that the server is having performance issues. + timeskipwarn="2s" + # quietbursts: When syncing or splitting from a network, a server # can generate a lot of connect and quit messages to opers with # +C and +Q snomasks. Setting this to yes squelches those messages, @@ -654,7 +713,7 @@ <security # allowcoreunload: If this value is set to yes, Opers will be able to - # unload core modules (e.g. cmd_privmsg.so). + # unload core modules (e.g. core_privmsg). allowcoreunload="no" # announceinvites: This option controls which members of the channel @@ -667,48 +726,45 @@ announceinvites="dynamic" # hideulines: If this value is set to yes, U-lined servers will - # be hidden from non-opers in /links and /map. + # be hidden from non-opers in /LINKS and /MAP. hideulines="no" - # flatlinks: If this value is set to yes, /map and /links will + # flatlinks: If this value is set to yes, /MAP and /LINKS will # be flattened when shown to non-opers. flatlinks="no" - # hidewhois: When defined, the given text will be used in place - # of the server a user is on when whoised by a non-oper. Most - # networks will want to set this to something like "*.netname.net" - # to conceal the actual server a user is on. - # Note that enabling this will cause users' idle times to only be - # shown when the format /WHOIS <nick> <nick> is used. - hidewhois="" + # hideserver: When defined, the given text will be used in place + # of the server name in public messages. As with <server:name> this + # does not need to resolve but does need to be a valid hostname. + # + # NOTE: enabling this will cause users' idle times to only be shown + # when a remote whois (/WHOIS <nick> <nick>) is used. + #hideserver="*.example.com" - # hidebans: If this value is set to yes, when a user is banned ([gkz]lined) + # hidebans: If this value is set to yes, when a user is banned ([KGZ]-lined) # only opers will see the ban message when the user is removed # from the server. hidebans="no" - # hidekills: If defined, replaces who set a /kill with a custom string. + # hidekills: If defined, replaces who executed a /KILL with a custom string. hidekills="" + # hideulinekills: Hide kills from clients of ulined servers from server notices. + hideulinekills="yes" + # hidesplits: If enabled, non-opers will not be able to see which # servers split in a netsplit, they will only be able to see that one # occurred (If their client has netsplit detection). hidesplits="no" # maxtargets: Maximum number of targets per command. - # (Commands like /notice, /privmsg, /kick, etc) + # (Commands like /NOTICE, /PRIVMSG, /KICK, etc) maxtargets="20" # customversion: A custom message to be displayed in the comments field # of the VERSION command response. This does not hide the InspIRCd version. customversion="" - # operspywhois: show opers (users/auspex) the +s channels a user is in. Values: - # splitmsg Split with an explanatory message - # yes Split with no explanatory message - # no Do not show - operspywhois="no" - # runasuser: If this is set, InspIRCd will attempt to switch # to run as this user, which allows binding of ports under 1024. # You should NOT set this unless you are starting as root. @@ -723,16 +779,17 @@ # restrictbannedusers: If this is set to yes, InspIRCd will not allow users # banned on a channel to change nickname or message channels they are - # banned on. + # banned on. This can also be set to silent to restrict the user but not + # notify them. restrictbannedusers="yes" # genericoper: Setting this value to yes makes all opers on this server - # appear as 'is an IRC operator' in their WHOIS, regardless of their + # appear as 'is a server operator' in their WHOIS, regardless of their # oper type, however oper types are still used internally. This only # affects the display in WHOIS. genericoper="no" - # userstats: /stats commands that users can run (opers can run all). + # userstats: /STATS commands that users can run (opers can run all). userstats="Pu"> #-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-# @@ -753,7 +810,7 @@ <limits # maxnick: Maximum length of a nickname. - maxnick="31" + maxnick="30" # maxchan: Maximum length of a channel name. maxchan="64" @@ -762,7 +819,7 @@ maxmodes="20" # maxident: Maximum length of a ident/username. - maxident="11" + maxident="10" # maxhost: Maximum length of a hostname. maxhost="64" @@ -776,8 +833,8 @@ # maxkick: Maximum length of a kick message. maxkick="255" - # maxgecos: Maximum length of a GECOS (realname). - maxgecos="128" + # maxreal: Maximum length of a real name. + maxreal="128" # maxaway: Maximum length of an away message. maxaway="200"> @@ -798,14 +855,9 @@ # Logging is covered with the <log> tag, which you may use to change # the behaviour of the logging of the IRCd. # -# In InspIRCd as of 1.2, logging is pluggable and very extensible. -# Different files can log the same thing, different 'types' of log can -# go to different places, and modules can even extend the log tag -# to do what they want. -# # An example log tag would be: # <log method="file" type="OPER" level="default" target="opers.log"> -# which would log all information on /oper (failed and successful) to +# which would log all information on /OPER (failed and successful) to # a file called opers.log. # # There are many different types which may be used, and modules may @@ -813,7 +865,6 @@ # - USERS - information relating to user connection and disconnection # - OPER - succesful and failed oper attempts # - KILL - kill related messages -# - snomask - server notices (*all* snomasks will be logged) # - FILTER - messages related to filter matches (filter module) # - CONFIG - configuration related messages # - COMMAND - die and restart messages, and messages related to unknown user types @@ -838,6 +889,11 @@ # - USERINPUT # - USEROUTPUT # +# If your server is producing a high levels of log messages you can also set the +# flush="[positive number]" attribute to specify how many log messages should be +# buffered before flushing to disk. You should probably not specify this unless +# you are having problems. +# # The following log tag is highly default and uncustomised. It is recommended you # sort out your own log tags. This is just here so you get some output. @@ -845,17 +901,17 @@ #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # -# This tag lets you define the behaviour of the /whowas command of # +# This tag lets you define the behaviour of the /WHOWAS command of # # your server. # # # <whowas # groupsize: Maximum entries per nick shown when performing - # a /whowas nick. + # a /WHOWAS <nick>. groupsize="10" # maxgroups: Maximum number of nickgroups that can be added to - # the list so that /whowas does not use a lot of resources on + # the list so that /WHOWAS does not use a lot of resources on # large networks. maxgroups="100000" @@ -883,12 +939,8 @@ # nick: Nick to disallow. Wildcards are supported. nick="ChanServ" - # reason: Reason to display on /nick. - reason="Reserved For Services"> - -<badnick nick="NickServ" reason="Reserved For Services"> -<badnick nick="OperServ" reason="Reserved For Services"> -<badnick nick="MemoServ" reason="Reserved For Services"> + # reason: Reason to display on /NICK. + reason="Reserved for a network service"> <badhost # host: ident@hostname to ban. @@ -901,25 +953,25 @@ <badhost host="root@*" reason="Don't IRC as root!"> <badhost host="*@198.51.100.0/24" reason="This subnet is bad."> -# exception: Hosts that are exempt from [kgz]lines. +# exception: Hosts that are exempt from [KGZ]-lines. <exception # host: ident@hostname to exempt. # Wildcards and CIDR (if you specify an IP) can be used. - host="*@ircop.example.com" + host="*@serverop.example.com" - # reason: Reason for exception. Only shown in /stats e + # reason: Reason for exception. Only shown in /STATS e. reason="Oper's hostname"> #-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # -# This optional tag allows you to specify how wide a gline, eline, # -# kline, zline or qline can be before it is forbidden from being # -# set. By setting hostmasks="yes", you can allow all G, K, E lines, # +# This optional tag allows you to specify how wide a G-line, E-line, # +# K-line, Z-line or Q-line can be before it is forbidden from being # +# set. By setting hostmasks="yes", you can allow all G-, K-, E-lines, # # no matter how many users the ban would cover. This is not # -# recommended! By setting ipmasks="yes", you can allow all Z lines, # +# recommended! By setting ipmasks="yes", you can allow all Z-lines, # # no matter how many users these cover too. Needless to say we # # don't recommend you do this, or, set nickmasks="yes", which will # -# allow any qline. # +# allow any Q-line. # # # <insane @@ -938,13 +990,6 @@ # will be banning 955 or more users. trigger="95.5"> - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# You should already know what to do here :) # - -<die value="User error. You didn't edit your config properly. Go back and try again."> - #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-# # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # @@ -961,25 +1006,24 @@ # The default does nothing -- we include it for simplicity for you. # <include file="examples/modules.conf.example"> -# Here are some pre-built modules.conf files that closely match the -# default configurations of some popular IRCd's. You still may want to -# look over them and make sure if everything is correct for you and setup -# the proper SSL information. +#-#-#-#-#-#-#-#-#-#-#-# SERVICES CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-# +# # +# If you use services you will probably want to include one of the # +# following files which set up aliases, nick reservations and filter # +# exemptions for services pseudoclients: # # -# *NOTE*: These files have no comments for what the modules do. If you -# are interested in that, please read the modules.conf.example. It is also -# recommended that you make your own modules file based on modules.conf.example. - -# Settings similar to UnrealIRCd defaults. -#<include file="examples/modules/unrealircd.conf.example"> - -# Settings similar to Charybdis IRCd defaults. -#<include file="examples/modules/charybdis.conf.example"> - +# Anope users should uncomment this: +#<include file="examples/services/anope.conf.example"> +# +# Atheme users should uncomment this: +#<include file="examples/services/atheme.conf.example"> +# +# Users of other services should uncomment this: +#<include file="examples/services/generic.conf.example"> ######################################################################### # # # - InspIRCd Development Team - # -# http://www.inspircd.org # +# https://www.inspircd.org # # # #########################################################################