X-Git-Url: https://git.netwichtig.de/gitweb/?a=blobdiff_plain;f=docs%2Fconf%2Fmodules.conf.example;h=1c219cbd6b5a3cd57b9e4327fe8f18a98d75be1f;hb=a032cd90ad5582914759e226085efee5aae1a1ef;hp=082db340d33d510f8353948912082a16c807dd2c;hpb=e3f22fcf31cd2e789d1be90cf0edf3e82829b54e;p=user%2Fhenk%2Fcode%2Finspircd.git diff --git a/docs/conf/modules.conf.example b/docs/conf/modules.conf.example index 082db340d..1c219cbd6 100644 --- a/docs/conf/modules.conf.example +++ b/docs/conf/modules.conf.example @@ -35,7 +35,7 @@ # this module being loaded to function. # # -# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SHA256 module: Allows other modules to generate SHA256 hashes, # usually for cryptographic uses and security. @@ -47,13 +47,6 @@ # be enhanced (for example the addition of HMAC authentication). # # -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# RIPEMD160 module: Allows other modules to generate RIPEMD160 hashes, -# usually for cryptographic uses and security. -# -# IMPORTANT: -# Other modules may rely on this module being loaded to function. -# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Abbreviation module: Provides the ability to abbreviate commands a-la @@ -294,18 +287,15 @@ # # #-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# maxaccepts - Maximum number of entries a user can add to his # -# /ACCEPT list. Default is 16 entries. # -# operoverride - Can opers (note: ALL opers) override callerid? # -# Default is no. # -# tracknick - Preserve /accept entries when a user changes nick? # +# maxaccepts - Maximum number of entries a user can add to their # +# /ACCEPT list. Default is 30 entries. # +# tracknick - Preserve /ACCEPT entries when a user changes nick? # # If no (the default), the user is removed from # -# everyone's accept list if he changes nickname. # +# everyone's accept list if their nickname changes. # # cooldown - Amount of time that must pass since the last # -# notification sent to a user before he can be sent # -# another. Default is 1 minute. # -# @@ -322,16 +312,21 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Censor module: Adds channel and user mode +G. +# Censor module: Adds channel and user mode +G which block phrases that +# are listed in the server bad words list. # # #-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # -# Optional - If you specify to use the censor module, then you must # -# specify some censor tags. See also: # -# https://wiki.inspircd.org/Modules/3.0/censor # -# -# +# If you have the censor module loaded you should specify one or more # +# phrases to replace/block in user messages. The config for this is # +# formatted as follows: # +# # +# Replaces "eggplant" with "aubergine" within messages: # +# # +# # +# Blocks messages that contain "fluffy capybaras": # +# # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CGI:IRC module: Enables forwarding the real IP address of a user from @@ -367,11 +362,17 @@ # address in the ident sent by the user. This is not recommended as it # only works with IPv4 connections. # -# When using this method you must specify a wildcard mask or CIDR range to -# allow gateway connections from. +# When using this method you must specify a wildcard mask or CIDR range to allow +# gateway connections from. You can also optionally configure the static value +# that replaces the IP in the ident to avoid leaking the real IP address of +# gateway clients (defaults to "gateway" if not set). # -# -# +# +# # # By default gateway connections are logged to the +w snomask. If you # do not want this to happen then you can uncomment this to disable it. @@ -405,7 +406,10 @@ # his/her message is blocked. # # If maxlen is set then it defines the maximum length of a filter entry. -# +# +# If notifyuser is set to no, the user will not be notified when +# his/her message is blocked. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel history module: Displays the last 'X' lines of chat to a user @@ -438,14 +442,14 @@ # that looks like the name of another channel on the network. # - + #allowrange=""> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channelban: Implements extended ban j:, which stops anyone already @@ -494,15 +498,15 @@ # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Connection class ban module: Adds support for extban 'n' which +# Connection class ban module: Adds support for extban 'n' which # matches against the class name of the user's connection. # This module assumes that connection classes are named in a uniform # way on all servers of the network. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Clear chan module: Allows opers to masskick, masskill or mass-G/ZLine -# all users on a channel using /CLEARCHAN. +# Clear chan module: Allows opers to masskick, masskill or +# mass G/Z-line all users on a channel using /CLEARCHAN. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -517,7 +521,8 @@ # # # To use cloaking, you must define a cloak key, and optionally a # # cloak prefix as shown below. The cloak key must be shared across # -# the network for correct cloaking. # +# the network for consistent cloaking and must be at least thirty # +# characters long. # # # # There are two methods of cloaking: # # # @@ -533,12 +538,21 @@ # # # The methods use a single key that can be any length of text. # # An optional prefix may be specified to mark cloaked hosts. # +# # +# IMPORTANT: Changing these details will break all of your existing # +# bans. If you do not want this to happen you can define multiple # +# cloak tags. The first will be used for cloaking and the rest will # +# be used for checking if a user is banned in a channel. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # +# +# #-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Close module: Allows an oper to close all unregistered connections. @@ -610,7 +624,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Connectban: Provides IP connection throttling. Any IP range that -# connects too many times (configurable) in an hour is Z-Lined for a +# connects too many times (configurable) in an hour is Z-lined for a # (configurable) duration, and their count resets to 0. # # @@ -755,6 +769,43 @@ # # # Glob masks are accepted here also. # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Disable module: Provides support for disabling commands and modes. # +# +# +#-#-#-#-#-#-#-#-#-#-#-#- DISABLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# +# # +# If you have the disable module loaded then you need to specify the # +# commands and modes that you want disabled. Users who have not fully # +# connected yet are exempt from this module so you can e.g. disable # +# the NICK command but still allow users to connect to the server. # +# # +# commands - A space-delimited list of commands that can not be used # +# by users. You can exempt server operators from this with # +# the servers/use-disabled-commands privilege. # +# # +# chanmodes - One or more channel modes that can not be added/removed # +# by users. You can exempt server operators from this # +# with the servers/use-disabled-commands privilege. # +# # +# usermodes - One or more user modes that can not be added/removed by # +# users. You can exempt server operators from this with # +# the servers/use-disabled-commands privilege. # +# # +# fakenonexistent - Whether to pretend that a disabled command/mode # +# does not exist when executed/changed by a user. # +# Defaults to no. # +# # +# notifyopers - Whether to send a notice to snomask `a` when a user # +# is prevented from using a disabled command/mode. # +# Defaults to no. # +# # +# # + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DNS blacklist module: Provides support for looking up IPs on one or # # more blacklists. # @@ -765,9 +816,13 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Exempt channel operators module: Provides support for allowing # -# channel operators to be exempt from some channel modes. Supported # -# modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, # -# filter, regmoderated, nonick, nonotice, and stripcolor. # +# users of a specified channel status to be exempt from some channel # +# restriction modes. Supported restrictions are # +# blockcaps, blockcolor, censor, filter, flood, nickflood, noctcp, # +# nonick, nonotice, regmoderated, stripcolor, and topiclock. # +# See in inspircd.conf.example for a more # +# detailed list of the restriction modes that can be exempted. # +# These are settable using /mode #chan +X : # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -788,14 +843,16 @@ # stdlib - stdlib regexps, provided via regex_stdlib, see comment # # at the tag for info on availability. # # # -# # +# If notifyuser is set to no, the user will not be notified when # +# his/her message is blocked. # +# +# # +# Your choice of regex engine must match on all servers network-wide. # # # -# Your choice of regex engine must match on all servers network-wide. -# # To learn more about the configuration of this module, read # # examples/filter.conf.example, which covers the various types of # # filters and shows how to add exemptions. # -# +# # #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the filter module, then # @@ -813,8 +870,9 @@ # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Gecos (real name) ban: Implements extended ban 'r', which stops anyone -# matching a mask like +b r:*realname?here* from joining a channel. +# Real name ban: Implements two extended bans: # +# 'a', which matches a n!u@h+realname mask like +b a:*!*@host+*real* # +# 'r', which matches a realname mask like +b r:*realname?here* # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -858,6 +916,12 @@ # must be in one of your oper class blocks. # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# HAProxy module: Adds support for the HAProxy PROXY v2 protocol. To +# use this module specify hook="haproxy" in the tag that HAProxy +# has been configured to connect to. +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HELPOP module: Provides the /HELPOP command # @@ -867,7 +931,7 @@ # If you specify to use the helpop module, then specify below the # # path to the helpop.conf file. # # # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hide chans module: Allows users to hide their channels list from non- @@ -900,6 +964,14 @@ # Only show invite exceptions (+I) to channel members: # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Hide mode module: Allows for hiding mode changes from users who do not +# have sufficient channel privileges. +# +# +# Hide bans (+b) from people who are not voiced: +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hide oper module: Allows opers to hide their oper status from non- # opers by setting user mode +H on themselves. @@ -914,11 +986,10 @@ # # # See https://wiki.inspircd.org/Modules/3.0/hostchange for help. # # # -# -# -# +# +# # -# +# # hostcycle: If loaded, when a user gets a host or ident set, it will # cycle them in all their channels. If not loaded it will simply change @@ -937,6 +1008,8 @@ # If you choose to use the httpd module, then you will need to add # a tag with type "httpd", and load at least one of the other # httpd_* modules to provide pages to display. +# +# # # You can adjust the timeout for HTTP connections below. All HTTP # connections will be closed after (roughly) this time period. @@ -959,13 +1032,22 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HTTP config module: Allows the configuration of the server to be -# viewed over HTTP. Requires httpd to be loaded for it to function. +# HTTP config module: Allows the server configuration to be viewed over +# HTTP via the /config path. Requires the httpd module to be loaded for +# it to function. +# +# IMPORTANT: This module exposes extremely sensitive information about +# your server and users so you *MUST* protect it using a local-only +# tag and/or the httpd_acl module. See above for details. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HTTP stats module: Provides basic stats pages over HTTP. -# Requires httpd to be loaded for it to function. +# HTTP stats module: Provides server statistics over HTTP via the /stats +# path. Requires the httpd module to be loaded for it to function. +# +# IMPORTANT: This module exposes extremely sensitive information about +# your server and users so you *MUST* protect it using a local-only +# tag and/or the httpd_acl module. See above for details. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -981,7 +1063,6 @@ # the timeout for ident lookups here. If not defined, it will default # # to 5 seconds. This is a non-blocking timeout which holds the user # # in a 'connecting' state until the lookup is complete. # -# The bind value indicates which IP to bind outbound requests to. # # nolookupprefix: If on, the idents of users being in a connect class # # with ident lookups disabled (i.e. ) will be # # prefixed with a "~". If off, the ident of those users will not be # @@ -1014,12 +1095,23 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# IRCv3 cap-notify module: Provides the cap-notify IRCv3.2 extension. -# Required for IRCv3.2 conformance. +# IRCv3 account-tag module. Adds the 'account' tag which contains the +# services account name of the message sender. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 batch module: Provides the batch IRCv3 extension which allows +# the server to inform a client that a group of messages are related to +# each other. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 cap-notify module: Provides the cap-notify IRCv3 extension. +# Required for IRCv3 conformance. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# IRCv3 chghost module: Provides the chghost IRCv3.2 extension which +# IRCv3 chghost module: Provides the chghost IRCv3 extension which # allows capable clients to learn when the host/ident of another user # changes without cycling the user. This module is compatible with the # hostcycle module. If both are loaded, clients supporting the chghost @@ -1027,20 +1119,25 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# IRCv3 echo-message module: Provides the echo-message IRCv3.2 +# IRCv3 echo-message module: Provides the echo-message IRCv3 # extension which allows capable clients to get an acknowledgement when # their messages are delivered and learn what modifications, if any, # were applied to them. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# IRCv3 invite-notify module: Provides the invite-notify IRCv3.2 +# IRCv3 invite-notify module: Provides the invite-notify IRCv3 # extension which notifies supporting clients when a user invites # another user into a channel. This respects . # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# IRCv3 Strict Transport Security module: Provides the sts IRCv3.2 +# IRCv3 server-time module. Adds the 'time' tag which adds a timestamp +# to all messages received from the server. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 Strict Transport Security module: Provides the sts IRCv3 # extension which allows clients connecting insecurely to upgrade their # connections to TLS. # @@ -1290,9 +1387,13 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No CTCP module: Adds the channel mode +C to block CTCPs and extban -# 'C' to block CTCPs sent by specific users. +# No CTCP module: Adds the channel mode +C and user mode +T to block +# CTCPs and extban 'C' to block CTCPs sent by specific users. # +# +# The +T user mode is not enabled by default to enable link compatibility +# with 2.0 servers. You can enable it by uncommenting this: +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No kicks module: Adds the +Q channel mode and the Q: extban to deny @@ -1397,11 +1498,7 @@ # onoper - If on, the message is sent on /OPER, otherwise it's # # only sent when /OPERMOTD is used. # # # -# processcolors - Allow color codes to be processed in the opermotd. # -# Read the comment above in # -# inspircd.conf.example for details. # -# # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Override module: Adds support for oper override. @@ -1435,7 +1532,7 @@ # Oper modes module: Allows you to specify modes to add/remove on oper. # Specify the modes as the 'modes' parameter of the tag # and/or as the 'modes' parameter of the tag. -# This module is oper-only. For the user equivalent, see the +# This module is oper-only. For the user equivalent, see the # conn_umodes module. # @@ -1539,6 +1636,10 @@ # Muteban: Implements extended ban 'm', which stops anyone matching # a mask like +b m:nick!user@host from speaking on channel. # +# +# If notifyuser is set to no, the user will not be notified when +# his/her message is blocked. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Random quote module: Provides a random quote on connect. @@ -1561,7 +1662,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular expression provider for glob or wildcard (?/*) matching. -# You must have at least 1 provider loaded to use the filter or rline +# You must have at least 1 provider loaded to use the filter or R-line # modules. This module has no additional requirements, as it uses the # matching already present in InspIRCd core. # @@ -1570,7 +1671,7 @@ # Regular expression provider for PCRE (Perl-Compatible Regular # Expressions). You need libpcre installed to compile and load this # module. You must have at least 1 provider loaded to use the filter or -# rline modules. +# R-line modules. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1583,7 +1684,7 @@ # Regular expression provider for POSIX regular expressions. # You shouldn't need any additional libraries on a POSIX-compatible # system (i.e.: any Linux, BSD, but not Windows). You must have at -# least 1 provider loaded to use filter or rline. +# least 1 provider loaded to use the filter or R-line modules. # On POSIX-compliant systems, regex syntax can be found by using the # command: 'man 7 regex'. # @@ -1610,14 +1711,6 @@ # to compile and load this module. # -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Registered users only channel creation module. If enabled, only -# registered users and opers can create new channels. -# -# You probably *DO NOT* want to load this module on a public network. -# -# - #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Remove module: Adds the /REMOVE command which is a peaceful # alternative to /KICK. @@ -1650,11 +1743,18 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restricted channels module: Allows only opers to create channels. +# Restricted channels module: Allows only opers or registered users to +# create channels. # # You probably *DO NOT* want to load this module on a public network. # # +# +# allowregistered: should registered users be allowed to bypass the restrictions? +# +# +# Allow any channel matching #user-* to be created, bypassing restrictchans checks +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restrict message module: Allows users to only message opers. @@ -1664,7 +1764,7 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# R-Line module: Ban users through regular expression patterns. +# R-line module: Ban users through regular expression patterns. # # #-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1673,15 +1773,15 @@ # useful under some situations, but *can* also use CPU with more users # on a server) then set 'matchonnickchange' to yes. # Also, this is where you set what Regular Expression engine is to be -# used. If you ever change it while running, all of your R-Lines will -# be wiped. This is the regex engine used by all R-Lines set, and +# used. If you ever change it while running, all of your R-lines will +# be wiped. This is the regex engine used by all R-lines set, and # regex_ must be loaded, or rline will be non-functional # until you load it or change the engine to one that is loaded. # # # -# Generally, you will NOT want to use 'glob' here, as this turns -# rline into just another gline. The exceptions are that rline will +# Generally, you will NOT want to use 'glob' here, as this turns an +# R-line into just another G-line. The exceptions are that R-lines will # always use the full "nick!user@host realname" string, rather than only # user@host, but beware that only the ? and * wildcards are available, # and are the only way to specify where the space can occur if you do @@ -1825,6 +1925,18 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SETNAME module: Adds the /SETNAME command. # +# +#-#-#-#-#-#-#-#-#-#-#-#- SETNAME CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# +# # +# operonly - Whether the SETNAME command should only be usable by # +# server operators. Defaults to no. # +# # +# notifyopers - Whether to send a snotice to snomask `a` when the # +# server operators. Defaults to to yes if oper-only and # +# no if usable by everyone. # +# # +# # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Serverban: Implements extended ban 's', which stops anyone connected @@ -1854,9 +1966,6 @@ # (similar to /MOTD; the default). # # * notice: Send contents as a series of notices. # # * msg: Send contents as a series of private messages. # -# colors - If true, color codes (\c, \b, \u, etc.) will be processed # -# and sent as ANSI colors. If false (default) the file will # -# be displayed as-is. # # # # When using the method "numeric", the following extra settings are # # available: # @@ -1869,7 +1978,6 @@ # # # @@ -2034,7 +2142,7 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be # +# SVSHold module: Implements SVSHOLD. Like Q-lines, but can only be # # added/removed by Services. # # # SVSHOLD does not generate server notices by default, you can turn @@ -2116,9 +2224,21 @@ # WebSocket connections. Compatible with SSL/TLS. # Requires SHA-1 hash support available in the sha1 module. # +# +# Whether to re-encode messages as UTF-8 before sending to WebSocket +# clients. This is recommended as the WebSocket protocol requires all +# text frames to be sent as UTF-8. If you do not have this enabled +# messages will be sent as binary frames instead. +# +# +# If you use the websocket module you MUST specify one or more origins +# which are allowed to connect to the server. You should set this as +# strict as possible to prevent malicious webpages from connecting to +# your server. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules) +# XLine database: Stores all *-lines (G/Z/K/R/any added by other modules) # in a file which is re-loaded on restart. This is useful # for two reasons: it keeps bans so users may not evade them, and on # bigger networks, server connections will take less time as there will