X-Git-Url: https://git.netwichtig.de/gitweb/?a=blobdiff_plain;f=docs%2Fconf%2Fmodules.conf.example;h=7d7fba26ca3dcd5c81213a58ca9fdea80ef317c4;hb=dcd07e389241e8bf23eabdf7da5c92c3f9ba5391;hp=ffb5d2a02f732d57ee6a1003674bbbf2dc155d6d;hpb=dbbd3339564b774e5f136657dbc4da565149b852;p=user%2Fhenk%2Fcode%2Finspircd.git

diff --git a/docs/conf/modules.conf.example b/docs/conf/modules.conf.example
index ffb5d2a02..7d7fba26c 100644
--- a/docs/conf/modules.conf.example
+++ b/docs/conf/modules.conf.example
@@ -319,6 +319,7 @@
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # CGI:IRC module: Adds support for automatic host changing in CGI:IRC
 # (http://cgiirc.sourceforge.net).
+# Adds snomask +w for monitoring CGI:IRC connections.
 #<module name="m_cgiirc.so">
 #
 #-#-#-#-#-#-#-#-#-#-#-# CGIIRC  CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
@@ -456,6 +457,11 @@
 # To use, CHGNAME must be in one of your oper class blocks.
 #<module name="m_chgname.so">
 
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Clear chan module: Allows opers to masskick, masskill or mass-G/ZLine
+# all users on a channel using /CLEARCHAN.
+#<module name="m_clearchan.so">
+
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Cloaking module: Adds usermode +x and cloaking support.
 # Relies on the module m_md5.so being loaded.
@@ -508,15 +514,16 @@
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Conn-Join: Allows you to force users to join one or more channels
-# automatically upon connecting to the server.
+# automatically upon connecting to the server, or join them in case
+# they aren't on any channels after being online for X seconds.
 #<module name="m_conn_join.so">
 #
 #-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
 #
-# If you have m_conn_join.so loaded, you can configure it using the
-# follow values:
-#
+# Join users immediately after connection to #one #two and #three.
 #<autojoin channel="#one,#two,#three">
+# Join users to #chat after 15 seconds if they aren't on any channels.
+#<autojoin channel="#chat" delay="15">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Conn-Usermodes: Set modes on users when they connect
@@ -556,7 +563,11 @@
 # IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling
 # over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
 #
-#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
+# A custom ban message may optionally be specified.
+#
+# <connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128"
+#  banmessage="Your IP range has been attempting to connect too many times in too short a duration. Wait a while, and you will be able to connect.">
+#
 # This allows for 10 connections in an hour with a 10 minute ban if that is exceeded.
 #
 #<module name="m_connectban.so">
@@ -842,6 +853,9 @@
 # a <bind> tag with type "httpd", and load at least one of the other
 # m_httpd_* modules to provide pages to display.
 #
+# You can adjust the timeout for HTTP connections below. All HTTP
+# connections will be closed after (roughly) this many seconds.
+#<httpd timeout="20">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # http ACL module: Provides access control lists for m_httpd dependent
@@ -971,7 +985,7 @@
 # <ldapauth dbid="ldapdb"                                             #
 #           baserdn="ou=People,dc=brainbox,dc=cc"                     #
 #           attribute="uid"                                           #
-#           allowpattern="Guest*"                                     #
+#           allowpattern="Guest* Bot*"                                #
 #           killreason="Access denied"                                #
 #           verbose="yes"                                             #
 #           host="$uid.$ou.inspircd.org">                             #
@@ -986,9 +1000,10 @@
 # The attribute value indicates the attribute which is used to locate #
 # a user account by name. On POSIX systems this is usually 'uid'.     #
 #                                                                     #
-# The allowpattern value allows you to specify a wildcard mask which  #
-# will always be allowed to connect regardless of if they have an     #
-# account, for example guest users.                                   #
+# The allowpattern value allows you to specify a space separated list #
+# of wildcard masks which will always be allowed to connect           #
+# regardless of if they have an account, for example guest and bot    #
+# users.                                                              #
 #                                                                     #
 # Killreason indicates the QUIT reason to give to users if they fail  #
 # to authenticate.                                                    #
@@ -1517,6 +1532,8 @@
 # SAJOIN module: Adds the /SAJOIN command
 # This module is oper-only.
 # To use, SAJOIN must be in one of your oper class blocks.
+# Opers need the users/sajoin-others priv to be able to /SAJOIN users
+# other than themselves.
 #<module name="m_sajoin.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1557,7 +1574,8 @@
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # SASL authentication module: Provides support for IRC Authentication 
-# Layer (aka: atheme SASL) via AUTHENTICATE.
+# Layer via AUTHENTICATE. Note: You also need to have m_cap.so loaded
+# for SASL to work.
 #<module name="m_sasl.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1681,9 +1699,7 @@
 #<module name="m_showwhois.so">
 #
 # If you wish, you may also let users set this mode. Only opers with the
-# users/auspex priv will see real hosts of people, though. This setting
-# is not reloadable via /rehash, and will require /reloadmodule, as
-# it directly affects the mode object itself.
+# users/auspex priv will see real hosts of people, though.
 #<showwhois opersonly="yes"
 #
 # You may also set whether or not users should receive whois notices, should
@@ -1808,10 +1824,19 @@
 #                                                                     #
 #<sqloper dbid="1" hash="md5">
 
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# StartTLS module: Implements STARTTLS, which allows clients          #
+# connected to non SSL enabled ports to enable SSL, if a proper SSL   #
+# module is loaded (either m_ssl_gnutls or m_ssl_openssl).            #
+#<module name="m_starttls.so">
+
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be   #
 # added/removed by Services.                                          #
 #<module name="m_svshold.so">
+# SVSHOLD does not generate server notices by default, you can turn
+# notices on by uncommenting the next line.
+#<svshold silent="false">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # SWHOIS module: Allows you to add arbitary lines to user WHOIS.