X-Git-Url: https://git.netwichtig.de/gitweb/?a=blobdiff_plain;f=docs%2Fconf%2Fmodules.conf.example;h=8d5251aeccf2af454a13303646a3bb8b548d51e3;hb=5267fb9d362aeb326c9e64f7171c957f76776f90;hp=93cf07ee25b4add000294781c6841291496439c7;hpb=51b82c3c064d3329e9c828e746da4df97e827872;p=user%2Fhenk%2Fcode%2Finspircd.git diff --git a/docs/conf/modules.conf.example b/docs/conf/modules.conf.example index 93cf07ee2..8d5251aec 100644 --- a/docs/conf/modules.conf.example +++ b/docs/conf/modules.conf.example @@ -19,8 +19,8 @@ # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # -# To link servers to InspIRCd, you MUST load the m_spanningtree # -# module. If you don't do this, server links will NOT work at all. # +# To link servers to InspIRCd, you MUST load the spanningtree module. # +# If you don't do this, server links will NOT work at all. # # This is by design, to allow for the implementation of other linking # # protocols in modules in the future. This module is at the bottom of # # this file. # @@ -31,38 +31,38 @@ # cryptographic uses and security. # # IMPORTANT: -# Other modules such as m_cloaking.so and m_password_hash.so may rely on +# Other modules such as cloaking and password_hash may rely on # this module being loaded to function. # -# +# # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SHA256 module: Allows other modules to generate SHA256 hashes, # usually for cryptographic uses and security. # # IMPORTANT: -# Other modules such as m_password_hash.so may rely on this module being -# loaded to function. Certain modules such as m_spanningtree.so will +# Other modules such as password_hash may rely on this module being +# loaded to function. Certain modules such as spanningtree will # function without this module but when it is loaded their features will # be enhanced (for example the addition of HMAC authentication). # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # RIPEMD160 module: Allows other modules to generate RIPEMD160 hashes, # usually for cryptographic uses and security. # # IMPORTANT: # Other modules may rely on this module being loaded to function. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Abbreviation module: Provides the ability to abbreviate commands a-la # BBC BASIC keywords. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alias module: Allows you to define server-side command aliases. -# +# # # Set the 'prefix' for in-channel aliases (fantasy commands) to the # specified character. If not set, the default is "!". @@ -72,9 +72,9 @@ # #-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # -# If you have the m_alias.so module loaded, you may also define # -# aliases as shown below. They are commonly used to provide shortcut # -# commands to services, however they are not limited to just this use.# +# If you have the alias module loaded, you may also define aliases as # +# shown below. They are commonly used to provide shortcut commands to # +# services, however they are not limited to just this use. # # An alias tag requires the following values to be defined in it: # # # # text - The text to detect as the actual command line. # @@ -180,18 +180,18 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Allowinvite module: Gives channel mode +A to allow all users to use # /INVITE, and extban A to deny invite from specific masks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alltime module: Shows time on all connected servers at once. # This module is oper-only and provides /ALLTIME. # To use, ALLTIME must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Auditorium module: Adds channel mode +u which makes everyone else # except you in the channel invisible, used for large meetings etc. -# +# # # Auditorium settings: # @@ -215,21 +215,21 @@ # Another useful combination is with SSL client certificate # fingerprints: +w h:z:72db600734bb9546c1bdd02377bc21d2a9690d48 will # give halfop to the user(s) having the given certificate. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban except module: Adds support for channel ban exceptions (+e). -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban redirection module: Allows bans which redirect to a specified # channel. e.g. +b nick!ident@host#channelbanneduserissentto -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # bcrypt module: Allows other modules to generate bcrypt hashes, # usually for cryptographic uses and security. -# +# # # rounds: Defines how many rounds the bcrypt function will run when # generating new hashes. @@ -237,12 +237,12 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block amsg module: Attempt to block all usage of /amsg and /ame. -# +# # #-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# If you have the m_blockamsg.so module loaded, you can configure it # -# with the tag: # +# If you have the blockamsg module loaded, you can configure it with # +# the tag: # # # # delay - How many seconds between two messages to force # # them to be recognised as unrelated. # @@ -254,12 +254,12 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block CAPS module: Adds channel mode +B, blocks all-CAPS messages. -# +# # #-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# percent - How many percent of text must be caps before text # -# will be blocked. # +# percent - What percentage of the text must be caps before # +# text will be blocked. # # # # minlen - The minimum length a line must be for the block # # percent to have any effect. # @@ -274,17 +274,17 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block color module: Blocking color-coded messages with chan mode +c. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Botmode module: Adds the user mode +B. If set on a user, it will # show that the user is a bot in /WHOIS. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CallerID module: Adds usermode +g which activates hybrid-style # callerid: block all private messages unless you /ACCEPT first. -# +# # #-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # maxaccepts - Maximum number of entries a user can add to his # @@ -304,23 +304,23 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CAP module: Provides the CAP negotiation mechanism required by the -# m_sasl, m_namesx, m_uhnames, and m_ircv3 modules. -# It is also recommended for the STARTTLS support in m_starttls. -# +# sasl, namesx, uhnames, and ircv3 modules. +# It is also recommended for STARTTLS support in the starttls module. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CBAN module: Lets you disallow channels from being used at runtime. # This module is oper-only and provides /CBAN. # To use, CBAN must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Censor module: Adds channel and user mode +G. -# +# # #-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # -# Optional - If you specify to use the m_censor module, then you must # +# Optional - If you specify to use the censor module, then you must # # specify some censor tags. See also: # # http://wiki.inspircd.org/Modules/censor # # @@ -330,11 +330,11 @@ # CGI:IRC module: Adds support for automatic host changing in CGI:IRC # (http://cgiirc.sourceforge.net). # Adds snomask +w for monitoring CGI:IRC connections. -# +# # #-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# # -# Optional - If you specify to use m_cgiirc, then you must specify one +# Optional - If you specify to use cgiirc, then you must specify one # or more cgihost tags which indicate authorised CGI:IRC servers which # will be connecting to your network, and an optional cgiirc tag. # For more information see: http://wiki.inspircd.org/Modules/cgiirc @@ -371,12 +371,12 @@ # Channel create module: Adds snomask +j, which will notify opers of # any new channels that are created. # This module is oper-only. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel filter module: Allows channel-op defined message filtering # using simple string matches (channel mode +g). -# +# # # If hidemask is set to yes, the user will not be shown the mask when # his/her message is blocked. @@ -387,7 +387,7 @@ # joining a channel with +H 'X:T' set; 'T' is the maximum time to keep # lines in the history buffer. Designed so that the new user knows what # the current topic of conversation is when joining the channel. -# +# # # Set the maximum number of lines allowed to be stored per channel below. # This is the hard limit for 'X'. @@ -403,7 +403,7 @@ # The "channel" field is where you want the messages to go, "snomasks" # is what snomasks you want to be sent to that channel. Multiple tags # are allowed. -# +# # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -411,7 +411,7 @@ # characters in the channel name such as bold, colorcodes, etc. which # can be quite annoying and allow users to on occasion have a channel # that looks like the name of another channel on the network. -# +# +# Note that by default wildcard characters * and ? are allowed in +# channel names. To disallow them, load m_channames and add characters +# 42 and 63 to denyrange (see above). +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Check module: Adds the /CHECK command. @@ -433,7 +436,7 @@ # IP addresses and hosts. # This module is oper-only. # To use, CHECK must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGHOST module: Adds the /CHGHOST command. @@ -442,7 +445,7 @@ # NOTE: Services will not be able to set vhosts on users if this module # isn't loaded. If you're planning on running services, you probably # want to load this. -# +# # #-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-# # Optional - If you want to use special chars for hostnames you can # @@ -457,30 +460,37 @@ # CHGIDENT module: Adds the /CHGIDENT command. # This module is oper-only. # To use, CHGIDENT must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGNAME module: Adds the /CHGNAME command. # This module is oper-only. # To use, CHGNAME must be in one of your oper class blocks. -# +# +# +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Connection class ban module: Adds support for extban 'n' which +# matches against the class name of the user's connection. +# This module assumes that connection classes are named in a uniform +# way on all servers of the network. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Clear chan module: Allows opers to masskick, masskill or mass-G/ZLine # all users on a channel using /CLEARCHAN. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Cloaking module: Adds usermode +x and cloaking support. -# Relies on the module m_md5.so being loaded. -# To cloak users when they connect, load m_conn_umodes and set +# Relies on the md5 module being loaded. +# To cloak users when they connect, load the conn_umodes module and set # to include the +x mode. The example tag -# shows this. See the m_conn_umodes module for more information. -# +# shows this. See the conn_umodes module for more information. +# # #-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # -# To use m_cloaking, you must define a cloak key, and optionally a # +# To use cloaking, you must define a cloak key, and optionally a # # cloak prefix as shown below. The cloak key must be shared across # # the network for correct cloaking. # # # @@ -505,7 +515,7 @@ # Close module: Allows an oper to close all unregistered connections. # This module is oper-only and provides the /CLOSE command. # To use, CLOSE must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Clones module: Adds an oper command /CLONES for detecting cloned @@ -513,25 +523,25 @@ # issued, use with care. # This module is oper-only. # To use, CLONES must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Common channels module: Adds user mode +c, which, when set, requires # that users must share a common channel with you to PRIVMSG or NOTICE # you. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Auto join on connect module: Allows you to force users to join one # or more channels automatically upon connecting to the server, or # join them in case they aren't on any channels after being online # for X seconds. -# +# # #-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # -# If you have m_conn_join.so loaded, you can configure it using the -# following values, or set autojoin="#chat,#help" in blocks. +# If you have the conn_join module loaded, you can configure it below +# or set autojoin="#chat,#help" in blocks. # # Join users immediately after connection to #one #two and #three. # @@ -542,18 +552,18 @@ # Set modes on connect module: When this module is loaded # blocks may have an optional modes="" value, which contains modes to # add or remove from users when they connect to the server. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Wait for PONG on connect module: Send a PING to all connecting users # and don't let them connect until they reply with a PONG. # This is useful to stop certain kinds of bots and proxies. -# +# # #-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# If you have the m_conn_waitpong.so module loaded, configure it with # -# the tag: # +# If you have the conn_waitpong module loaded, configure it with the # +# tag: # # # # sendsnotice - Whether to send a helpful notice to users on # # connect telling them how to connect, should # @@ -567,13 +577,13 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel cycle module: Adds the /CYCLE command which is a server-side # /HOP that bypasses restrictive modes. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Connectban: Provides IP connection throttling. Any IP range that # connects too many times (configurable) in an hour is Z-Lined for a # (configurable) duration, and their count resets to 0. -# +# # # ipv4cidr and ipv6cidr allow you to turn the comparison from # individual IP addresses (32 and 128 bits) into CIDR masks, to allow @@ -588,7 +598,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Connection throttle module. -# +# # #-#-#-#-#-#-#-#-#-#-#- CONNTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # seconds, maxconns - Amount of connections per . @@ -608,7 +618,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Custom prefixes: Allows for channel prefixes to be added. -# +# # # name The name of the mode, must be unique from other modes. # letter The letter used for this mode. Required. @@ -623,19 +633,19 @@ # # # -# Do /RELOADMODULE m_customprefix.so after changing the settings of this module. +# Do /RELOADMODULE customprefix after changing the settings of this module. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Custom title module: Adds the /TITLE command which allows for trusted # users to gain a custom whois line and an optional vhost can be # specified. -# +# # #-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # name - The username used to identify. # password - The password used to identify. # hash - The hash for the specific user's password (optional). -# m_password_hash.so and a hashing module must be loaded +# password_hash and a hashing module must be loaded # for this to work. # host - Allowed hostmask (optional). # title - Title shown in whois. @@ -647,13 +657,14 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DCCALLOW module: Adds the /DCCALLOW command. -# +# # #-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # blockchat - Whether to block DCC CHAT as well as DCC SEND. # length - Default duration of entries in DCCALLOW list. # action - Default action to take if no action is # specified, can be 'block' or 'allow'. +# maxentries - Max number of nicks to allow on a DCCALLOW list. # # File configuration: # pattern - The glob pattern to match against. @@ -661,14 +672,14 @@ # that matches this pattern, can be 'block' or # 'allow'. # -# +# # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Deaf module: Adds support for the usermode +d - deaf to channel # messages and channel notices. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Delay join module: Adds the channel mode +D which delays all JOIN @@ -676,24 +687,24 @@ # speaking, their quit or part message will not be shown to the channel # which helps cut down noise on large channels in a more friendly way # than the auditorium mode. Only channel ops may set the +D mode. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Delay message module: Adds the channel mode +d which disallows a user # from talking in the channel unless they've been joined for X seconds. # Settable using /MODE #chan +d 30 -# +# # Set allownotice to no to disallow NOTICEs too. Defaults to yes. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Deny channels module: Deny channels from being used by users. -# +# # #-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-# # # -# If you have the m_denychans.so module loaded, you need to specify # -# the channels to deny: # +# If you have the denychans module loaded, you need to specify the # +# channels to deny: # # # # name - The channel name to deny (glob masks are ok). # # allowopers - If operators are allowed to override the deny. # @@ -712,14 +723,14 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Devoice module: Let users devoice themselves using /DEVOICE #chan. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DNS blacklist module: Provides support for looking up IPs on one or # # more blacklists. # -# # +# # # # -# For configuration options please see the wiki page for m_dnsbl at # +# For configuration options please see the wiki page for dnsbl at # # http://wiki.inspircd.org/Modules/dnsbl # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -727,24 +738,24 @@ # channel operators to be exempt from some channel modes. Supported # # modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, # # filter, regmoderated, nonick, nonotice, and stripcolor. # -# # +# # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Filter module: Provides message filtering, similar to SPAMFILTER. # -# +# # # -# This module depends upon a regex provider such as m_regex_pcre or # -# m_regex_glob to function. You must specify which of these you want # -# m_filter to use via the tag below. # +# This module depends upon a regex provider such as regex_pcre or # +# regex_glob to function. You must specify which of these you want # +# the filter module to use via the tag below. # # # # Valid engines are: # # # -# glob - Glob patterns, provided via m_regex_glob. # -# pcre - PCRE regexps, provided via m_regex_pcre, needs libpcre. # -# tre - TRE regexps, provided via m_regex_tre, requires libtre. # -# posix - POSIX regexps, provided via m_regex_posix, not available # +# glob - Glob patterns, provided via regex_glob. # +# pcre - PCRE regexps, provided via regex_pcre, needs libpcre. # +# tre - TRE regexps, provided via regex_tre, requires libtre. # +# posix - POSIX regexps, provided via regex_posix, not available # # on Windows, no dependencies on other operating systems. # -# stdlib - stdlib regexps, provided via m_regex_stdlib, see comment # +# stdlib - stdlib regexps, provided via regex_stdlib, see comment # # at the tag for info on availability. # # # # # @@ -757,7 +768,7 @@ # #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # -# Optional - If you specify to use the m_filter module, then # +# Optional - If you specify to use the filter module, then # # specify below the path to the filter.conf file, or define some # # tags. # # # @@ -769,12 +780,12 @@ # allowing all IPs to connect to all plaintext IRC ports # # # # # -# # +# # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Gecos ban: Implements extended ban 'r', which stops anyone matching # a mask like +b r:*realname?here* from joining a channel. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GeoIP module: Allows the server admin to match users by country code. @@ -784,7 +795,7 @@ # This module requires GeoIP to be installed on your system, # use your package manager to find the appropriate packages # or check the InspIRCd wiki page for this module. -# +# # # The actual allow/ban actions are done by connect classes, not by the # GeoIP module. An example connect class to ban people from russia or @@ -802,7 +813,7 @@ # Globops module: Provides the /GLOBOPS command and snomask +g. # This module is oper-only. # To use, GLOBOPS must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Global load module: Allows loading and unloading of modules network- @@ -811,23 +822,23 @@ # and /GRELOADMODULE. # To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE # must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HELPOP module: Provides the /HELPOP command -# +# # #-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# If you specify to use the m_helpop.so module, then specify below # -# the path to the helpop.conf file. # +# If you specify to use the helpop module, then specify below the # +# path to the helpop.conf file. # # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hide chans module: Allows users to hide their channels list from non- # opers by setting user mode +I on themselves. -# +# # # This mode can optionally prevent opers from seeing channels on a +I # user, for more privacy if set to true. @@ -837,7 +848,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hide list module: Allows for hiding the list of listmodes from users # who do not have sufficient channel rank. -# +# # # Each tag configures one listmode to hide. # mode: Name of the listmode to hide. @@ -859,11 +870,11 @@ # Hide oper module: Allows opers to hide their oper status from non- # opers by setting user mode +H on themselves. # This module is oper-only. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hostchange module: Allows a different style of cloaking. -# +# # #-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # @@ -878,31 +889,34 @@ # hostcycle: If loaded, when a user gets a host or ident set, it will # cycle them in all their channels. If not loaded it will simply change # their host/ident without cycling them. -# +# This module is compatible with the ircv3_chghost module. Clients +# supporting the chghost extension will get the chghost message instead +# of seeing a host cycle. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # httpd module: Provides HTTP server support for InspIRCd. -# +# # #-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # -# If you choose to use the m_httpd.so module, then you will need to add +# If you choose to use the httpd module, then you will need to add # a tag with type "httpd", and load at least one of the other -# m_httpd_* modules to provide pages to display. +# httpd_* modules to provide pages to display. # # You can adjust the timeout for HTTP connections below. All HTTP # connections will be closed after (roughly) this many seconds. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HTTP ACL module: Provides access control lists for m_httpd dependent +# HTTP ACL module: Provides access control lists for httpd dependent # modules. Use this module to restrict pages by IP address and by # password. -# +# # #-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # -# Restrict access to the m_httpd_stats module to all but the local +# Restrict access to the httpd_stats module to all but the local # network and when the correct password is specified: # @@ -912,27 +926,27 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HTTP config module: Allows the configuration of the server to be -# viewed over HTTP. Requires m_httpd.so to be loaded for it to function. -# +# viewed over HTTP. Requires httpd to be loaded for it to function. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HTTP stats module: Provides basic stats pages over HTTP. -# Requires m_httpd.so to be loaded for it to function. -# +# Requires httpd to be loaded for it to function. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ident: Provides RFC 1413 ident lookup support. # When this module is loaded tags may have an optional # useident="yes|no" boolean value, determining whether or not to lookup # ident on users matching that connect tag. -# +# # #-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# Optional - If you are using the m_ident.so module, then you can # -# specify the timeout for ident lookups here. If not defined, it will # -# default to 5 seconds. This is a non-blocking timeout which holds # -# the user in a 'connecting' state until the lookup is complete. # +# Optional - If you are using the ident module, then you can specify # +# the timeout for ident lookups here. If not defined, it will default # +# to 5 seconds. This is a non-blocking timeout which holds the user # +# in a 'connecting' state until the lookup is complete. # # The bind value indicates which IP to bind outbound requests to. # # nolookupprefix: If on, the idents of users being in a connect class # # with ident lookups disabled (i.e. ) will be # @@ -944,7 +958,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Invite exception module: Adds support for channel invite exceptions # (+I). -# +# # bypasskey: If this is enabled, exceptions will bypass +k as well as +i # @@ -953,22 +967,48 @@ # extended-join, away-notify and account-notify. These are optional # enhancements to the client-to-server protocol. An extension is only # active for a client when the client specifically requests it, so this -# module needs m_cap to work. +# module needs the cap module to work. # # Further information on these extensions can be found at the IRCv3 # working group website: # http://ircv3.org/extensions/ # -# +# # The following block can be used to control which extensions are -# enabled. Note that extended-join can be incompatible with m_delayjoin +# enabled. Note that extended-join can be incompatible with delayjoin # and host cycling. # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 cap-notify module: Provides the cap-notify IRCv3.2 extension. +# Required for IRCv3.2 conformance. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 chghost module: Provides the chghost IRCv3.2 extension which +# allows capable clients to learn when the host/ident of another user +# changes without cycling the user. This module is compatible with the +# hostcycle module. If both are loaded, clients supporting the chghost +# extension will get the chghost message and won't see host cycling. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 echo-message module: Provides the echo-message IRCv3.2 +# extension which allows capable clients to get an acknowledgement when +# their messages are delivered and learn what modifications, if any, +# were applied to them. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 invite-notify module: Provides the invite-notify IRCv3.2 +# extension which notifies supporting clients when a user invites +# another user into a channel. This respects . +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Join flood module: Adds support for join flood protection +j X:Y. # Closes the channel for 60 seconds if X users join in Y seconds. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Jump server module: Adds support for the RPL_REDIR numeric. @@ -976,15 +1016,15 @@ # To use, JUMPSERVER must be in one of your oper class blocks. # If your server is redirecting new clients and you get disconnected, # do a REHASH from shell to open up again. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Anti auto rejoin: Adds support for prevention of auto-rejoin (+J). -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Knock module: Adds the /KNOCK command and channel mode +K. -# +# # # This setting specifies what to do when someone successfully /KNOCKs. # If set to "notice", then a NOTICE will be sent to the channel. @@ -1002,7 +1042,7 @@ # ./configure --enable-extras=m_ldap.cpp # and run make install, then uncomment this module to enable it. # -# +# # # The server parameter indicates the LDAP server to connect to. The # # ldap:// style scheme before the hostname proper is MANDATORY. # @@ -1019,7 +1059,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # LDAP authentication module: Adds the ability to authenticate users # # via LDAP. # -# +# # # # Configuration: # # # @@ -1072,7 +1112,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # LDAP oper configuration module: Adds the ability to authenticate # # opers via LDAP. # -# +# # # # Configuration: # # # @@ -1081,8 +1121,8 @@ # attribute="uid"> # # # Available configuration items are identical to the same items in # -# m_ldapauth above (except for the verbose setting, that is only # -# supported in m_ldapauth). # +# ldapauth above (except for the verbose setting, that is only # +# supported in ldapauth). # # Please always specify a password in your tags even if the # # opers are to be authenticated via LDAP, so in case this module is # # not loaded the oper accounts are still protected by a password. # @@ -1096,44 +1136,37 @@ # If your server is locked and you get disconnected, do a REHASH from # # shell to open up again. # # This module is oper-only. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Map hiding module: replaces /MAP and /LINKS output to users with a # # message to see a website, set by maphide="http://test.org/map" in # # the tag, instead. # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Message flood module: Adds message/notice flood protection via # channel mode +f. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MLOCK module: Adds support for server-side enforcement of services # side MLOCKs. Basically, this module suppresses any mode change that # would likely be immediately bounced by services. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Modenotice module: Adds the /MODENOTICE command that allows opers to # send notices to all users having the given user mode(s) set. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# MsSQL module: Allows other SQL modules to access MS SQL Server -# through a unified API. -# This module is in extras. Re-run configure with: -# ./configure --enable-extras=m_mssql.cpp -# and run make install, then uncomment this module to enable it. -# -# -#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# -# # -# m_mssql.so is more complex than described here, see wiki for more # -# info http://wiki.inspircd.org/Modules/mssql # +# Monitor module: Adds support for MONITOR which is used by clients to +# maintain notify lists. +# # -# +# Set the maximum number of entries on a user's monitor list below. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MySQL module: Allows other SQL modules to access MySQL databases @@ -1141,12 +1174,12 @@ # This module is in extras. Re-run configure with: # ./configure --enable-extras=m_mysql.cpp # and run make install, then uncomment this module to enable it. -# +# # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # -# m_mysql.so is more complex than described here, see the wiki for # -# more: http://wiki.inspircd.org/Modules/mysql # +# mysql is more complex than described here, see the wiki for more # +# info: http://wiki.inspircd.org/Modules/mysql # # # @@ -1155,70 +1188,73 @@ # modes via long-form mode names via +Z and the /PROP command. # For example, to set a ban, do /mode #channel +Z ban=foo!bar@baz or # /PROP #channel ban=foo!bar@baz -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # NAMESX module: Provides support for the NAMESX extension which allows # clients to see all the prefixes set on a user without getting confused. # This is supported by mIRC, x-chat, klient, and maybe more. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # National characters module: # 1) Allows using national characters in nicknames. # 2) Allows using custom (national) casemapping over the network. -# -# -# file - filename of existing file in "locales" directory -# casemapping - custom value for 005 numeric (if you want it to be -# different from the filename). Set this to the name of -# the locale if you are specifying an absolute path. +# +# +# file - Location of the file which contains casemapping rules. If this +# is a relative path then it is relative to "/../locales" +# on UNIX and "/locales" on Windows. +# casemapping - The name of the casemapping sent to clients in the 005 +# numeric. If this is not set then it defaults to the name +# of the casemapping file unless the file name contains a +# space in which case you will have to specify it manually. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nickchange flood protection module: Provides channel mode +F X:Y # which allows up to X nick changes in Y seconds. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nicklock module: Let opers change a user's nick and then stop that # user from changing their nick again until unlocked. # This module is oper-only. # To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No CTCP module: Adds the channel mode +C to block CTCPs and extban # 'C' to block CTCPs sent by specific users. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No kicks module: Adds the +Q channel mode and the Q: extban to deny # certain users from kicking. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No nicks module: Adds the +N channel mode, as well as the 'N' extban. # +N stops all users from changing their nick, the N extban stops # anyone from matching a +b N:nick!user@host mask from changing their # nick. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No part message module: Adds extban 'p' to block part messages from # # matching users. # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No notice module: Adds the channel mode +T and the extban 'T' to # block specific users from noticing the channel. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Network business join module: # Allows an oper to join a channel using /OJOIN, giving them +Y on the # channel which makes them immune to kick/deop/etc. -# +# # # Specify the prefix that +Y will grant here. # Leave 'prefix' empty if you do not wish +Y to grant a prefix. @@ -1233,16 +1269,17 @@ # /mode #channel +iI O:* is equivalent to channel mode +O, but you # may also set +iI O:AdminTypeOnly to only allow admins. # Modes +I and +e work in a similar fashion. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper join module: Auto-joins opers to a channel upon oper-up. -# This module is oper-only. For the user equivalent, see m_conn_join. -# +# This module is oper-only. For the user equivalent, see the conn_join +# module. +# # #-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# If you are using the m_operjoin.so module, specify options here: # +# If you are using the operjoin module, specify options here: # # # # channel - The channel name to join, can also be a comma # # separated list e.g. "#channel1,#channel2". # @@ -1262,7 +1299,7 @@ # type "m_operlog" at default loglevel), and optionally to the 'r' # snomask. # This module is oper-only. -# +# # # If the following option is on then all oper commands will be sent to # the snomask 'r'. The default is off. @@ -1276,7 +1313,7 @@ # # Load this module if you want all your IRC operators to have channel # operator powers. -# +# # # You may additionally customise the prefix character. # @@ -1285,11 +1322,11 @@ # Oper MOTD module: Provides support for separate message of the day # on oper-up. # This module is oper-only. -# +# # #-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# If you are using the m_opermotd.so module, specify the motd here. # +# If you are using the opermotd module, specify the motd here. # # # # onoper - If on, the message is sent on /OPER, otherwise it's # # only sent when /OPERMOTD is used. # @@ -1303,11 +1340,11 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Override module: Adds support for oper override. # This module is oper-only. -# +# # #-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# m_override.so is too complex it describe here, see the wiki: # +# override is too complex it describe here, see the wiki: # # http://wiki.inspircd.org/Modules/override # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1315,21 +1352,22 @@ # being taken by lower level opers against higher level opers. # Specify the level as the 'level' parameter of the tag. # This module is oper-only. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper modes module: Allows you to specify modes to add/remove on oper. # Specify the modes as the 'modes' parameter of the tag # and/or as the 'modes' parameter of the tag. -# This module is oper-only. For the user equivalent, see m_conn_umodes. -# +# This module is oper-only. For the user equivalent, see the +# conn_umodes module. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Password forwarding module: Forwards a password users can send on # connect to the specified client below. The client is usually NickServ # and this module is usually used to authenticate users with NickServ # using their connect password. -# +# +# To be useful, a hashing module like sha256 also needs to be loaded. +# # #-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-# # @@ -1372,7 +1410,7 @@ # PBKDF2 module: Allows other modules to generate PBKDF2 hashes, # usually for cryptographic uses and security. # This module relies on other hash providers (e.g. SHA256). -# +# # # iterations: Iterations the hashing function runs when generating new # hashes. @@ -1389,9 +1427,9 @@ # channels -may- need support from your Services package to function # properly with them. This adds channel mode +P. # This module is oper-only. -# +# # -# If you like, m_permchannels can write a config file of permanent channels +# If you like, this module can write a config file of permanent channels # whenever +P is set, unset, or the topic/modes on a +P channel is changed. # If you want to do this, set the filename below, and uncomment the include. # @@ -1410,11 +1448,11 @@ # This module is in extras. Re-run configure with: # ./configure --enable-extras=m_pgsql.cpp # and run make install, then uncomment this module to enable it. -# +# # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # -# m_pgsql.so is more complex than described here, see the wiki for # +# pgsql is more complex than described here, see the wiki for # # more: http://wiki.inspircd.org/Modules/pgsql # # # @@ -1422,18 +1460,18 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Muteban: Implements extended ban 'm', which stops anyone matching # a mask like +b m:nick!user@host from speaking on channel. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Random quote module: Provides a random quote on connect. # NOTE: Some of these may mimic fatal errors and confuse users and # opers alike - BEWARE! -# +# # #-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# Optional - If you specify to use the m_randquote.so module, then # -# specify below the path to the quotes file. # +# Optional - If you specify to use the randquote module, then specify # +# below the path to the quotes file. # # # # @@ -1447,37 +1485,37 @@ # This also breaks linking to servers that do not have the option. # # This defaults to false for the 2.0 version, it will be enabled in # # all the future versions. # -# +# # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular expression provider for glob or wildcard (?/*) matching. -# You must have at least 1 provider loaded to use m_filter or m_rline +# You must have at least 1 provider loaded to use the filter or rline # modules. This module has no additional requirements, as it uses the # matching already present in InspIRCd core. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular expression provider for PCRE (Perl-Compatible Regular # Expressions). You need libpcre installed to compile and load this -# module. You must have at least 1 provider loaded to use m_filter or -# m_rline. -# +# module. You must have at least 1 provider loaded to use the filter or +# rline modules. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular Expression Provider for RE2 Regular Expressions. # You need libre2 installed and in your include/library paths in order # to compile and load this module. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular expression provider for POSIX regular expressions. # You shouldn't need any additional libraries on a POSIX-compatible # system (i.e.: any Linux, BSD, but not Windows). You must have at -# least 1 provider loaded to use m_filter or m_rline. +# least 1 provider loaded to use filter or rline. # On POSIX-compliant systems, regex syntax can be found by using the # command: 'man 7 regex'. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular expression provider for C++11 std::regex regular expressions. @@ -1487,7 +1525,7 @@ # You should verify that std::regex is supported by your setup before # using this module, as it may compile normally but won't do anything # on some implementations. -# +# # # Specify the regular expression engine to use here. Valid settings are # bre, ere, awk, grep, egrep, ecmascript (default if not specified). @@ -1499,7 +1537,7 @@ # if you are most familiar with the syntax of /SPAMFILTER from there, # this is the provider you want. You need libtre installed in order # to compile and load this module. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Registered users only channel creation module. If enabled, only @@ -1507,12 +1545,12 @@ # # You probably *DO NOT* want to load this module on a public network. # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Remove module: Adds the /REMOVE command which is a peaceful # alternative to /KICK. -# +# # # supportnokicks: If true, /REMOVE is not allowed on channels where the # nokicks (+Q) mode is set. Defaults to false. @@ -1538,25 +1576,25 @@ # before they are checked, resulting in less CPU usage. Increasing this beyond 512 # doesn't have any effect, as the maximum length of a message on IRC cannot exceed that. # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restricted channels module: Allows only opers to create channels. # # You probably *DO NOT* want to load this module on a public network. # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restrict message module: Allows users to only message opers. # # You probably *DO NOT* want to load this module on a public network. # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # R-Line module: Ban users through regular expression patterns. -# +# # #-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # @@ -1566,7 +1604,7 @@ # Also, this is where you set what Regular Expression engine is to be # used. If you ever change it while running, all of your R-Lines will # be wiped. This is the regex engine used by all R-Lines set, and -# m_regex_.so must be loaded, or rline will be non-functional +# regex_ must be loaded, or rline will be non-functional # until you load it or change the engine to one that is loaded. # # @@ -1584,7 +1622,7 @@ # Allows channel mods to remove list modes en masse. # Syntax: /rmode [pattern] # E.g. '/rmode #Channel b m:*' will remove all mute-extbans on the channel. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAJOIN module: Adds the /SAJOIN command which forcibly joins a user @@ -1593,14 +1631,14 @@ # To use, SAJOIN must be in one of your oper class blocks. # Opers need the users/sajoin-others priv to be able to /SAJOIN users # other than themselves. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAKICK module: Adds the /SAKICK command which kicks a user from the # given channel. # This module is oper-only. # To use, SAKICK must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAMODE module: Adds the /SAMODE command which allows server operators @@ -1608,45 +1646,45 @@ # channel priviliges. Also allows changing user modes for any user. # This module is oper-only. # To use, SAMODE must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SANICK module: Adds the /SANICK command which allows opers to change # users' nicks. # This module is oper-only. # To use, SANICK must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAPART module: Adds the /SAPART command which forcibly parts a user # from a channel. # This module is oper-only. # To use, SAPART must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAQUIT module: Adds the /SAQUIT command which forcibly quits a user. # This module is oper-only. # To use, SAQUIT must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SATOPIC module: Adds the /SATOPIC command which allows changing the # topic on a channel without requiring any channel priviliges. # This module is oper-only. # To use, SATOPIC must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SASL authentication module: Provides support for IRC Authentication -# Layer via AUTHENTICATE. Note: You also need to have m_cap.so loaded +# Layer via AUTHENTICATE. Note: You also need to have cap loaded # for SASL to work. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Secure list module: Prevent /LIST in the first minute of connection, # crippling most spambots and trojan spreader bots. -# +# # #-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # @@ -1666,19 +1704,19 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Servprotect module: Provides support for Austhex style +k / # UnrealIRCD +S services mode. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # See nicks module: Adds snomask +n and +N which show local and remote # nick changes. # This module is oper-only. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Set idle module: Adds a command for opers to change their idle time. # This module is oper-only. # To use, SETIDLE must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Services support module: Adds several usermodes such as +R and +M. @@ -1693,36 +1731,41 @@ # +b R: (stop matching account names from joining) # +b U:n!u@h (blocks matching unregistered users) # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Sethost module: Adds the /SETHOST command. # This module is oper-only. # To use, SETHOST must be in one of your oper class blocks. -# See m_chghost for how to customise valid chars for hostnames. -# +# See the chghost module for how to customise valid chars for hostnames. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Setident module: Adds the /SETIDENT command. # This module is oper-only. # To use, SETIDENT must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SETNAME module: Adds the /SETNAME command. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Serverban: Implements extended ban 's', which stops anyone connected # to a server matching a mask like +b s:server.mask.here from joining. -# +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SHA1 module: Allows other modules to generate SHA1 hashes. +# Required by the WebSocket module. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Showfile: Provides support for showing a text file to users when # # they enter a command. # # This module adds one command for each tag that shows the # # given file to the user as a series of messages or numerics. # -# # +# # # # #-#-#-#-#-#-#-#-#-#-# SHOWFILE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # @@ -1758,7 +1801,7 @@ # Show whois module: Adds the +W usermode which allows opers to see # when they are /WHOIS'd. # This module is oper-only by default. -# +# # # If you wish, you may also let users set this mode. Only opers with the # users/auspex priv will see real hosts of people, though. @@ -1773,7 +1816,7 @@ # executing all except configured commands. # This module is oper-only. # To use, SHUN must be in one of your oper class blocks. -# +# # # You may also configure which commands you wish a user to be able to # perform when shunned. It should be noted that if a shunned user @@ -1790,25 +1833,25 @@ # channel mode +z and the 'z' extban which matches SSL client # certificate fingerprints. # Does not do anything useful without a working SSL module (see below). -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GnuTLS SSL module: Adds support for SSL connections using GnuTLS, # if enabled. You must answer 'yes' in ./configure when asked or # manually symlink the source for this module from the directory # src/modules/extra, if you want to enable this, or it will not load. -# +# # #-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # -# m_ssl_gnutls.so is too complex to describe here, see the wiki: # +# ssl_gnutls is too complex to describe here, see the wiki: # # http://wiki.inspircd.org/Modules/ssl_gnutls # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SSL info module: Allows users to retrieve information about other # users' peer SSL certificates and keys. This can be used by client -# scripts to validate users. For this to work, one of m_ssl_gnutls.so -# or m_ssl_openssl.so must be loaded. This module also adds the +# scripts to validate users. For this to work, one of ssl_gnutls +# or ssl_openssl must be loaded. This module also adds the # "* is using a secure connection" whois line, the ability for # opers to use SSL cert fingerprints to verify their identity and the # ability to force opers to use SSL connections in order to oper up. @@ -1817,29 +1860,33 @@ # For how to use the oper features, please see the first example tag # in opers.conf.example. # -# +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# mbedTLS SSL module: Adds support for SSL/TLS connections using mbedTLS. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # OpenSSL SSL module: Adds support for SSL connections using OpenSSL, # if enabled. You must answer 'yes' in ./configure when asked or symlink # the source for this module from the directory src/modules/extra, if # you want to enable this, or it will not load. -# +# # #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # -# m_ssl_openssl.so is too complex to describe here, see the wiki: # +# ssl_openssl is too complex to describe here, see the wiki: # # http://wiki.inspircd.org/Modules/ssl_openssl # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Strip color module: Adds channel mode +S that strips mIRC color -# codes from all messages sent to the channel. -# +# Strip color module: Adds channel mode +S that strips color codes and +# all control codes except CTCP from all messages sent to the channel. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Silence module: Adds support for the /SILENCE command, which allows # users to have a server-side ignore list for their client. -# +# # # Set the maximum number of entries allowed on a user's silence list. # +# # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # -# m_sqlite.so is more complex than described here, see the wiki for # -# more: http://wiki.inspircd.org/Modules/sqlite3 # +# sqlite is more complex than described here, see the wiki for more # +# info: http://wiki.inspircd.org/Modules/sqlite3 # # # @@ -1870,11 +1917,11 @@ # ./configure --enable-extras=m_sqlauth.cpp # and run make install, then uncomment this module to enable it. # -# +# # #-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # -# m_sqlauth.so is too complex to describe here, see the wiki: # +# sqlauth is too complex to describe here, see the wiki: # # http://wiki.inspircd.org/Modules/sqlauth # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1883,7 +1930,7 @@ # ./configure --enable-extras=m_sqloper.cpp # and run make install, then uncomment this module to enable it. # -# +# # #-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # @@ -1897,13 +1944,13 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # StartTLS module: Implements STARTTLS, which allows clients # # connected to non SSL enabled ports to enable SSL, if a proper SSL # -# module is loaded (either m_ssl_gnutls or m_ssl_openssl). # -# +# module is loaded (either ssl_gnutls or ssl_openssl). # +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be # # added/removed by Services. # -# +# # SVSHOLD does not generate server notices by default, you can turn # notices on by uncommenting the next line. # @@ -1912,29 +1959,23 @@ # SWHOIS module: Allows you to add arbitrary lines to user WHOIS. # This module is oper-only. # To use, SWHOIS must be in one of your oper class blocks. -# - -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Test module: Enable this to create a command useful in testing -# flood control. To avoid accidental use on live networks, the server -# name must contain ".test" to load the module -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Timed bans module: Adds timed channel bans with the /TBAN command. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Test line module: Adds the /TLINE command, used to test how many # users a /GLINE or /ZLINE etc. would match. # This module is oper-only. # To use, TLINE must be in one of your oper class blocks. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Topiclock module: implements server-side topic locking to achieve deeper # integration with services packages. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # UHNAMES support module: Adds support for the IRCX style UHNAMES @@ -1942,23 +1983,23 @@ # each user, saving clients from doing a WHO on the channel. # If a client does not support UHNAMES it will not enable it, this will # not break incompatible clients. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Uninvite module: Adds the /UNINVITE command which lets users remove # pending invites from channels without waiting for the user to join. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Userip module: Adds the /USERIP command. # Allows users to query their own IP, also allows opers to query the IP # of anyone else. -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Vhost module: Adds the VHOST command which allows for adding virtual # hosts which are accessible using a username and password in the config. -# +# # #-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # @@ -1967,8 +2008,8 @@ # pass - Password for the vhost. # # # # hash - The hash for the specific user (optional) # -# m_password_hash.so and a hashing module must be loaded # -# for this to work. # +# password_hash and a hashing module must be loaded for # +# this to work. # # # # host - Vhost to set. # # @@ -1978,18 +2019,25 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Watch module: Adds the WATCH command, which is used by clients to # maintain notify lists. -# +# # # Set the maximum number of entries on a user's watch list below. # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# WebSocket module: Adds HTML5 WebSocket support. +# Specify hook="websocket" in a tag to make that port accept +# WebSocket connections. Compatible with SSL/TLS. +# Requires SHA-1 hash support available in the sha1 module. +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # XLine database: Stores all *Lines (G/Z/K/R/any added by other modules) # in a file which is re-loaded on restart. This is useful # for two reasons: it keeps bans so users may not evade them, and on # bigger networks, server connections will take less time as there will # be a lot less bans to apply - as most of them will already be there. -# +# # Specify the filename for the xline database here. # @@ -2001,8 +2049,8 @@ # | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| # # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # -# To link servers to InspIRCd, you MUST load the m_spanningtree # -# module. If you don't do this, server links will NOT work at all. # +# To link servers to InspIRCd, you MUST load the spanningtree module. # +# If you don't do this, server links will NOT work at all. # # This is by design, to allow for the implementation of other linking # # protocols in modules in the future. # @@ -2011,4 +2059,4 @@ # tree protocol (see the READ THIS BIT section above). # You will almost always want to load this. # -# +#