X-Git-Url: https://git.netwichtig.de/gitweb/?a=blobdiff_plain;f=docs%2Fconf%2Fmodules.conf.example;h=980d0d6a56c7a64dafd118d642175debb1c57f17;hb=4047a143fc1d16350db70c94b9ea77d79de05714;hp=28450c7e9eae50a0f388c23281a42a5893e420fc;hpb=257bf752fc6b87fa35bfa8cf95fc37730c3d55c6;p=user%2Fhenk%2Fcode%2Finspircd.git diff --git a/docs/conf/modules.conf.example b/docs/conf/modules.conf.example index 28450c7e9..980d0d6a5 100644 --- a/docs/conf/modules.conf.example +++ b/docs/conf/modules.conf.example @@ -10,7 +10,7 @@ # # # By default, ALL modules are commented out. You must uncomment them # # or add lines to your config to load modules. Please refer to # -# http://wiki.inspircd.org/Modules for a list of modules and # +# https://wiki.inspircd.org/3.0/Modules for a list of modules and # # each modules link for any additional conf tags they require. # # # # ____ _ _____ _ _ ____ _ _ _ # @@ -35,7 +35,7 @@ # this module being loaded to function. # # -# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SHA256 module: Allows other modules to generate SHA256 hashes, # usually for cryptographic uses and security. @@ -47,13 +47,6 @@ # be enhanced (for example the addition of HMAC authentication). # # -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# RIPEMD160 module: Allows other modules to generate RIPEMD160 hashes, -# usually for cryptographic uses and security. -# -# IMPORTANT: -# Other modules may rely on this module being loaded to function. -# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Abbreviation module: Provides the ability to abbreviate commands a-la @@ -175,6 +168,20 @@ # To use, ALLTIME must be in one of your oper class blocks. # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Anticaps module: Adds channel mode +B which allows you to punish +# users that send overly capitalised messages to channels. Unlike the +# blockcaps module this module is more flexible as it has more options +# for punishment and allows channels to configure their own punishment +# policies. +# +# +# You may also configure the characters which anticaps considers to be +# lower case and upper case. Any characters not listed here are assumed +# to be punctuation and will be ignored when counting: +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Auditorium module: Adds channel mode +u which makes everyone else # except you in the channel invisible, used for large meetings etc. @@ -241,23 +248,29 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block CAPS module: Adds channel mode +B, blocks all-CAPS messages. +# +# NOTE: This module is deprecated and will be removed in a future version +# of InspIRCd. You should use the anticaps module shown above instead. # # #-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# percent - What percentage of the text must be caps before # -# text will be blocked. # +# percent - The percentage of a message which must be upper # +# case before it will be blocked. # # # -# minlen - The minimum length a line must be for the block # -# percent to have any effect. # +# minlen - The minimum length a message must be before it # +# will be blocked. # # # -# capsmap - A list of chars to be considered CAPS. Can be used # -# to add CAPS characters for your language. Also you # -# can add things like ! and space to further lock # -# down on caps usage. # +# lowercase - The characters which will be considered lower # +# case. # +# # +# uppercase - The characters which will be considered upper # +# case. # +# # +# lowercase="abcdefghijklmnopqrstuvwxyz" +# uppercase="ABCDEFGHIJKLMNOPQRSTUVWXYZ"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block color module: Blocking color-coded messages with chan mode +c. @@ -274,18 +287,15 @@ # # #-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# -# maxaccepts - Maximum number of entries a user can add to his # -# /ACCEPT list. Default is 16 entries. # -# operoverride - Can opers (note: ALL opers) override callerid? # -# Default is no. # -# tracknick - Preserve /accept entries when a user changes nick? # +# maxaccepts - Maximum number of entries a user can add to their # +# /ACCEPT list. Default is 30 entries. # +# tracknick - Preserve /ACCEPT entries when a user changes nick? # # If no (the default), the user is removed from # -# everyone's accept list if he changes nickname. # +# everyone's accept list if their nickname changes. # # cooldown - Amount of time that must pass since the last # -# notification sent to a user before he can be sent # -# another. Default is 1 minute. # -# @@ -309,7 +319,7 @@ # # # Optional - If you specify to use the censor module, then you must # # specify some censor tags. See also: # -# http://wiki.inspircd.org/Modules/censor # +# https://wiki.inspircd.org/Modules/3.0/censor # # # @@ -347,11 +357,17 @@ # address in the ident sent by the user. This is not recommended as it # only works with IPv4 connections. # -# When using this method you must specify a wildcard mask or CIDR range to -# allow gateway connections from. +# When using this method you must specify a wildcard mask or CIDR range to allow +# gateway connections from. You can also optionally configure the static value +# that replaces the IP in the ident to avoid leaking the real IP address of +# gateway clients (defaults to "gateway" if not set). # -# -# +# +# # # By default gateway connections are logged to the +w snomask. If you # do not want this to happen then you can uncomment this to disable it. @@ -383,7 +399,12 @@ # # If hidemask is set to yes, the user will not be shown the mask when # his/her message is blocked. -# +# +# If maxlen is set then it defines the maximum length of a filter entry. +# +# If notifyuser is set to no, the user will not be notified when +# his/her message is blocked. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel history module: Displays the last 'X' lines of chat to a user @@ -397,7 +418,7 @@ # If notice is set to yes, joining users will get a NOTICE before playback # telling them about the following lines being the pre-join history. # If bots is set to yes, it will also send to users marked with +B -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel logging module: Used to send snotice output to channels, to @@ -416,14 +437,14 @@ # that looks like the name of another channel on the network. # - + #allowrange=""> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channelban: Implements extended ban j:, which stops anyone already @@ -479,8 +500,8 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Clear chan module: Allows opers to masskick, masskill or mass-G/ZLine -# all users on a channel using /CLEARCHAN. +# Clear chan module: Allows opers to masskick, masskill or +# mass G/Z-line all users on a channel using /CLEARCHAN. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -495,7 +516,8 @@ # # # To use cloaking, you must define a cloak key, and optionally a # # cloak prefix as shown below. The cloak key must be shared across # -# the network for correct cloaking. # +# the network for consistent cloaking and must be at least thirty # +# characters long. # # # # There are two methods of cloaking: # # # @@ -511,12 +533,21 @@ # # # The methods use a single key that can be any length of text. # # An optional prefix may be specified to mark cloaked hosts. # +# # +# IMPORTANT: Changing these details will break all of your existing # +# bans. If you do not want this to happen you can define multiple # +# cloak tags. The first will be used for cloaking and the rest will # +# be used for checking if a user is banned in a channel. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # +# +# #-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Close module: Allows an oper to close all unregistered connections. @@ -588,7 +619,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Connectban: Provides IP connection throttling. Any IP range that -# connects too many times (configurable) in an hour is Z-Lined for a +# connects too many times (configurable) in an hour is Z-lined for a # (configurable) duration, and their count resets to 0. # # @@ -624,7 +655,7 @@ # quitmsg="Throttled" bootwait="10"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Custom prefixes: Allows for channel prefixes to be added. +# Custom prefixes: Allows for channel prefixes to be configured. # # # name The name of the mode, must be unique from other modes. @@ -639,7 +670,11 @@ # # # -# +# +# You can also override the configuration of prefix modes added by both the core +# and other modules by adding a customprefix tag with change="yes" specified. +# +# # # Do /RELOADMODULE customprefix after changing the settings of this module. @@ -730,8 +765,41 @@ # Glob masks are accepted here also. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Devoice module: Let users devoice themselves using /DEVOICE #chan. -# +# Disable module: Provides support for disabling commands and modes. # +# +# +#-#-#-#-#-#-#-#-#-#-#-#- DISABLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# +# # +# If you have the disable module loaded then you need to specify the # +# commands and modes that you want disabled. Users who have not fully # +# connected yet are exempt from this module so you can e.g. disable # +# the NICK command but still allow users to connect to the server. # +# # +# commands - A space-delimited list of commands that can not be used # +# by users. You can exempt server operators from this with # +# the servers/use-disabled-commands privilege. # +# # +# chanmodes - One or more channel modes that can not be added/removed # +# by users. You can exempt server operators from this # +# with the servers/use-disabled-commands privilege. # +# # +# usermodes - One or more user modes that can not be added/removed by # +# users. You can exempt server operators from this with # +# the servers/use-disabled-commands privilege. # +# # +# fakenonexistent - Whether to pretend that a disabled command/mode # +# does not exist when executed/changed by a user. # +# Defaults to no. # +# # +# notifyopers - Whether to send a notice to snomask `a` when a user # +# is prevented from using a disabled command/mode. # +# Defaults to no. # +# # +# # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DNS blacklist module: Provides support for looking up IPs on one or # @@ -739,13 +807,17 @@ # # # # # For configuration options please see the wiki page for dnsbl at # -# http://wiki.inspircd.org/Modules/dnsbl # +# https://wiki.inspircd.org/Modules/3.0/dnsbl # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Exempt channel operators module: Provides support for allowing # -# channel operators to be exempt from some channel modes. Supported # -# modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, # -# filter, regmoderated, nonick, nonotice, and stripcolor. # +# users of a specified channel status to be exempt from some channel # +# restriction modes. Supported restrictions are # +# blockcaps, blockcolor, censor, filter, flood, nickflood, noctcp, # +# nonick, nonotice, regmoderated, stripcolor, and topiclock. # +# See in inspircd.conf.example for a more # +# detailed list of the restriction modes that can be exempted. # +# These are settable using /mode #chan +X : # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -766,14 +838,16 @@ # stdlib - stdlib regexps, provided via regex_stdlib, see comment # # at the tag for info on availability. # # # -# # +# If notifyuser is set to no, the user will not be notified when # +# his/her message is blocked. # +# +# # +# Your choice of regex engine must match on all servers network-wide. # # # -# Your choice of regex engine must match on all servers network-wide. -# # To learn more about the configuration of this module, read # # examples/filter.conf.example, which covers the various types of # # filters and shows how to add exemptions. # -# +# # #-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Optional - If you specify to use the filter module, then # @@ -791,8 +865,9 @@ # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Gecos ban: Implements extended ban 'r', which stops anyone matching -# a mask like +b r:*realname?here* from joining a channel. +# Real name ban: Implements two extended bans: # +# 'a', which matches a n!u@h+realname mask like +b a:*!*@host+*real* # +# 'r', which matches a realname mask like +b r:*realname?here* # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -811,6 +886,10 @@ # # # +# If enabled you can also ban people from channnels by country code +# using the G: extban (e.g. /mode #channel +b G:US). +# +# # The country code must be in capitals and should be an ISO country # code such as TR, GB, or US. Unknown IPs (localhost, LAN IPs, etc) # will be assigned the country code "UNK". Since connect classes are @@ -832,6 +911,12 @@ # must be in one of your oper class blocks. # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# HAProxy module: Adds support for the HAProxy PROXY v2 protocol. To +# use this module specify hook="haproxy" in the tag that HAProxy +# has been configured to connect to. +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # HELPOP module: Provides the /HELPOP command # @@ -841,7 +926,7 @@ # If you specify to use the helpop module, then specify below the # # path to the helpop.conf file. # # # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hide chans module: Allows users to hide their channels list from non- @@ -874,6 +959,14 @@ # Only show invite exceptions (+I) to channel members: # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Hide mode module: Allows for hiding mode changes from users who do not +# have sufficient channel privileges. +# +# +# Hide bans (+b) from people who are not voiced: +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Hide oper module: Allows opers to hide their oper status from non- # opers by setting user mode +H on themselves. @@ -886,13 +979,12 @@ # #-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # -# See http://wiki.inspircd.org/Modules/hostchange for help. # +# See https://wiki.inspircd.org/Modules/3.0/hostchange for help. # # # -# -# -# +# +# # -# +# # hostcycle: If loaded, when a user gets a host or ident set, it will # cycle them in all their channels. If not loaded it will simply change @@ -911,6 +1003,8 @@ # If you choose to use the httpd module, then you will need to add # a tag with type "httpd", and load at least one of the other # httpd_* modules to provide pages to display. +# +# # # You can adjust the timeout for HTTP connections below. All HTTP # connections will be closed after (roughly) this time period. @@ -933,13 +1027,22 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HTTP config module: Allows the configuration of the server to be -# viewed over HTTP. Requires httpd to be loaded for it to function. +# HTTP config module: Allows the server configuration to be viewed over +# HTTP via the /config path. Requires the httpd module to be loaded for +# it to function. +# +# IMPORTANT: This module exposes extremely sensitive information about +# your server and users so you *MUST* protect it using a local-only +# tag and/or the httpd_acl module. See above for details. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# HTTP stats module: Provides basic stats pages over HTTP. -# Requires httpd to be loaded for it to function. +# HTTP stats module: Provides server statistics over HTTP via the /stats +# path. Requires the httpd module to be loaded for it to function. +# +# IMPORTANT: This module exposes extremely sensitive information about +# your server and users so you *MUST* protect it using a local-only +# tag and/or the httpd_acl module. See above for details. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -955,7 +1058,6 @@ # the timeout for ident lookups here. If not defined, it will default # # to 5 seconds. This is a non-blocking timeout which holds the user # # in a 'connecting' state until the lookup is complete. # -# The bind value indicates which IP to bind outbound requests to. # # nolookupprefix: If on, the idents of users being in a connect class # # with ident lookups disabled (i.e. ) will be # # prefixed with a "~". If off, the ident of those users will not be # @@ -971,7 +1073,7 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# IRCv3 module: Provides the following IRCv3.1 extensions: +# IRCv3 module: Provides the following IRCv3 extensions: # extended-join, away-notify and account-notify. These are optional # enhancements to the client-to-server protocol. An extension is only # active for a client when the client specifically requests it, so this @@ -979,7 +1081,7 @@ # # Further information on these extensions can be found at the IRCv3 # working group website: -# http://ircv3.org/extensions/ +# http://ircv3.net/irc/ # # # The following block can be used to control which extensions are @@ -988,12 +1090,23 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# IRCv3 cap-notify module: Provides the cap-notify IRCv3.2 extension. -# Required for IRCv3.2 conformance. +# IRCv3 account-tag module. Adds the 'account' tag which contains the +# services account name of the message sender. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 batch module: Provides the batch IRCv3 extension which allows +# the server to inform a client that a group of messages are related to +# each other. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 cap-notify module: Provides the cap-notify IRCv3 extension. +# Required for IRCv3 conformance. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# IRCv3 chghost module: Provides the chghost IRCv3.2 extension which +# IRCv3 chghost module: Provides the chghost IRCv3 extension which # allows capable clients to learn when the host/ident of another user # changes without cycling the user. This module is compatible with the # hostcycle module. If both are loaded, clients supporting the chghost @@ -1001,18 +1114,44 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# IRCv3 echo-message module: Provides the echo-message IRCv3.2 +# IRCv3 echo-message module: Provides the echo-message IRCv3 # extension which allows capable clients to get an acknowledgement when # their messages are delivered and learn what modifications, if any, # were applied to them. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# IRCv3 invite-notify module: Provides the invite-notify IRCv3.2 +# IRCv3 invite-notify module: Provides the invite-notify IRCv3 # extension which notifies supporting clients when a user invites # another user into a channel. This respects . # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 server-time module. Adds the 'time' tag which adds a timestamp +# to all messages received from the server. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# IRCv3 Strict Transport Security module: Provides the sts IRCv3 +# extension which allows clients connecting insecurely to upgrade their +# connections to TLS. +# +# +# If using the ircv3_sts module you MUST define a STS policy to send +# to clients using the tag. This tag takes the following +# attributes: +# +# host - A glob match for the SNI hostname to apply this policy to. +# duration - The amount of time that the policy lasts for. Defaults to +# approximately two months by default. +# port - The port on which TLS connections to the server are being +# accepted. You MUST have a CA-verified certificate on this +# port. Self signed certificates are not acceptable. +# preload - Whether client developers can include your certificate in +# preload lists. +# +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Join flood module: Adds support for join flood protection +j X:Y. # Closes the channel for N seconds if X users join in Y seconds. @@ -1195,7 +1334,7 @@ #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # mysql is more complex than described here, see the wiki for more # -# info: http://wiki.inspircd.org/Modules/mysql # +# info: https://wiki.inspircd.org/Modules/3.0/mysql # # # @@ -1243,9 +1382,13 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# No CTCP module: Adds the channel mode +C to block CTCPs and extban -# 'C' to block CTCPs sent by specific users. +# No CTCP module: Adds the channel mode +C and user mode +T to block +# CTCPs and extban 'C' to block CTCPs sent by specific users. # +# +# The +T user mode is not enabled by default to enable link compatibility +# with 2.0 servers. You can enable it by uncommenting this: +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # No kicks module: Adds the +Q channel mode and the Q: extban to deny @@ -1350,11 +1493,7 @@ # onoper - If on, the message is sent on /OPER, otherwise it's # # only sent when /OPERMOTD is used. # # # -# processcolors - Allow color codes to be processed in the opermotd. # -# Read the comment above in # -# inspircd.conf.example for details. # -# # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Override module: Adds support for oper override. @@ -1363,8 +1502,19 @@ # #-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# override is too complex it describe here, see the wiki: # -# http://wiki.inspircd.org/Modules/override # +# Much of override's configuration relates to your oper blocks. # +# For more information on how to allow opers to override, see: # +# https://wiki.inspircd.org/Modules/3.0/override # +# # +# noisy - If enabled, all oper overrides will be announced # +# via channel notice. # +# # +# requirekey - If enabled, overriding on join requires a channel # +# key of "override" to be specified # +# # +# enableumode - If enabled, usermode +O is required for override. # +# # +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper levels module: Gives each oper a level and prevents actions @@ -1472,8 +1622,8 @@ # #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # -# pgsql is more complex than described here, see the wiki for # -# more: http://wiki.inspircd.org/Modules/pgsql # +# pgsql is more complex than described here, see the wiki for # +# more: https://wiki.inspircd.org/Modules/3.0/pgsql # # # @@ -1481,6 +1631,10 @@ # Muteban: Implements extended ban 'm', which stops anyone matching # a mask like +b m:nick!user@host from speaking on channel. # +# +# If notifyuser is set to no, the user will not be notified when +# his/her message is blocked. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Random quote module: Provides a random quote on connect. @@ -1496,21 +1650,14 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Redirect module: Adds channel redirection mode +L. # -# Optional: to add usermode +L to stop forced # -# redirection and instead print an error. # -# # -# Note: You can not update this with a simple rehash, it requires # -# reloading the module for it to take effect. # -# This also breaks linking to servers that do not have the option. # -# This defaults to false for the 2.0 version, it will be enabled in # -# all the future versions. # +# Redirect module: Adds channel mode +L which redirects users to # +# another channel when the channel has reached its user limit and # +# user mode +L which stops redirection. # # -# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Regular expression provider for glob or wildcard (?/*) matching. -# You must have at least 1 provider loaded to use the filter or rline +# You must have at least 1 provider loaded to use the filter or R-line # modules. This module has no additional requirements, as it uses the # matching already present in InspIRCd core. # @@ -1519,7 +1666,7 @@ # Regular expression provider for PCRE (Perl-Compatible Regular # Expressions). You need libpcre installed to compile and load this # module. You must have at least 1 provider loaded to use the filter or -# rline modules. +# R-line modules. # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1532,7 +1679,7 @@ # Regular expression provider for POSIX regular expressions. # You shouldn't need any additional libraries on a POSIX-compatible # system (i.e.: any Linux, BSD, but not Windows). You must have at -# least 1 provider loaded to use filter or rline. +# least 1 provider loaded to use the filter or R-line modules. # On POSIX-compliant systems, regex syntax can be found by using the # command: 'man 7 regex'. # @@ -1559,14 +1706,6 @@ # to compile and load this module. # -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Registered users only channel creation module. If enabled, only -# registered users and opers can create new channels. -# -# You probably *DO NOT* want to load this module on a public network. -# -# - #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Remove module: Adds the /REMOVE command which is a peaceful # alternative to /KICK. @@ -1599,11 +1738,18 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Restricted channels module: Allows only opers to create channels. +# Restricted channels module: Allows only opers or registered users to +# create channels. # # You probably *DO NOT* want to load this module on a public network. # # +# +# allowregistered: should registered users be allowed to bypass the restrictions? +# +# +# Allow any channel matching #user-* to be created, bypassing restrictchans checks +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Restrict message module: Allows users to only message opers. @@ -1613,7 +1759,7 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# R-Line module: Ban users through regular expression patterns. +# R-line module: Ban users through regular expression patterns. # # #-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1622,15 +1768,15 @@ # useful under some situations, but *can* also use CPU with more users # on a server) then set 'matchonnickchange' to yes. # Also, this is where you set what Regular Expression engine is to be -# used. If you ever change it while running, all of your R-Lines will -# be wiped. This is the regex engine used by all R-Lines set, and +# used. If you ever change it while running, all of your R-lines will +# be wiped. This is the regex engine used by all R-lines set, and # regex_ must be loaded, or rline will be non-functional # until you load it or change the engine to one that is loaded. # # # -# Generally, you will NOT want to use 'glob' here, as this turns -# rline into just another gline. The exceptions are that rline will +# Generally, you will NOT want to use 'glob' here, as this turns an +# R-line into just another G-line. The exceptions are that R-lines will # always use the full "nick!user@host realname" string, rather than only # user@host, but beware that only the ? and * wildcards are available, # and are the only way to specify where the space can occur if you do @@ -1700,6 +1846,12 @@ # Layer via AUTHENTICATE. Note: You also need to have cap loaded # for SASL to work. # +# Define the following to your services server name to improve security +# by ensuring the SASL messages are only sent to the services server +# and not to all connected servers. This prevents a rogue server from +# capturing SASL messages and disables the SASL cap when services is +# down. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Secure list module: Prevent /LIST in the first minute of connection, @@ -1797,9 +1949,6 @@ # (similar to /MOTD; the default). # # * notice: Send contents as a series of notices. # # * msg: Send contents as a series of private messages. # -# colors - If true, color codes (\c, \b, \u, etc.) will be processed # -# and sent as ANSI colors. If false (default) the file will # -# be displayed as-is. # # # # When using the method "numeric", the following extra settings are # # available: # @@ -1812,7 +1961,6 @@ # # # @@ -1848,12 +1996,25 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SSL channel mode module: Adds support for SSL-only channels via -# channel mode +z and the 'z' extban which matches SSL client -# certificate fingerprints. +# SSL mode module: Adds support for SSL-only channels via the '+z' +# channel mode, SSL-only private messages via the '+z' user mode and +# the 'z:' extban which matches SSL client certificate fingerprints. +# # Does not do anything useful without a working SSL module and the # sslinfo module (see below). # +# +# The +z user mode is not enabled by default to enable link compatibility +# with 2.0 servers. You can enable it by uncommenting this: +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SSL rehash signal module: Allows the SSL modules to be rehashed by +# sending SIGUSR1 to a running InspIRCd process. +# This modules is in extras. Re-run configure with: +# ./configure --enable-extras=m_sslrehashsignal.cpp +# and run make install, then uncomment this module to enable it. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # GnuTLS SSL module: Adds support for SSL connections using GnuTLS, @@ -1865,7 +2026,7 @@ #-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # ssl_gnutls is too complex to describe here, see the wiki: # -# http://wiki.inspircd.org/Modules/ssl_gnutls # +# https://wiki.inspircd.org/Modules/3.0/ssl_gnutls # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SSL info module: Allows users to retrieve information about other @@ -1896,7 +2057,7 @@ #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # ssl_openssl is too complex to describe here, see the wiki: # -# http://wiki.inspircd.org/Modules/ssl_openssl # +# https://wiki.inspircd.org/Modules/3.0/ssl_openssl # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Strip color module: Adds channel mode +S that strips color codes and @@ -1926,40 +2087,36 @@ #-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# # # # sqlite is more complex than described here, see the wiki for more # -# info: http://wiki.inspircd.org/Modules/sqlite3 # +# info: https://wiki.inspircd.org/Modules/3.0/sqlite3 # # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL authentication module: Allows IRCd connections to be tied into # a database table (for example a forum). -# This module is in extras. Re-run configure with: -# ./configure --enable-extras=m_sqlauth.cpp -# and run make install, then uncomment this module to enable it. # # # #-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # sqlauth is too complex to describe here, see the wiki: # -# http://wiki.inspircd.org/Modules/sqlauth # +# https://wiki.inspircd.org/Modules/3.0/sqlauth # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SQL oper module: Allows you to store oper credentials in an SQL table -# This module is in extras. Re-run configure with: -# ./configure --enable-extras=m_sqloper.cpp -# and run make install, then uncomment this module to enable it. +# SQL oper module: Allows you to store oper credentials in an SQL +# table. You can add additional table columns like you would config +# tags in opers.conf. Opers in opers.conf will override opers from +# this module. # # # #-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # dbid - Database ID to use (see SQL modules). # -# hash - Hashing provider to use for password hashing. # # # -# See also: http://wiki.inspircd.org/Modules/sqloper # +# See also: https://wiki.inspircd.org/Modules/3.0/sqloper # # # -# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # StartTLS module: Implements STARTTLS, which allows clients # @@ -1968,7 +2125,7 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be # +# SVSHold module: Implements SVSHOLD. Like Q-lines, but can only be # # added/removed by Services. # # # SVSHOLD does not generate server notices by default, you can turn @@ -2050,9 +2207,21 @@ # WebSocket connections. Compatible with SSL/TLS. # Requires SHA-1 hash support available in the sha1 module. # +# +# Whether to re-encode messages as UTF-8 before sending to WebSocket +# clients. This is recommended as the WebSocket protocol requires all +# text frames to be sent as UTF-8. If you do not have this enabled +# messages will be sent as binary frames instead. +# +# +# If you use the websocket module you MUST specify one or more origins +# which are allowed to connect to the server. You should set this as +# strict as possible to prevent malicious webpages from connecting to +# your server. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules) +# XLine database: Stores all *-lines (G/Z/K/R/any added by other modules) # in a file which is re-loaded on restart. This is useful # for two reasons: it keeps bans so users may not evade them, and on # bigger networks, server connections will take less time as there will