X-Git-Url: https://git.netwichtig.de/gitweb/?a=blobdiff_plain;f=docs%2Fconf%2Fopers.conf.example;h=c388230b40337300b50fdba23baa9d3c0c175303;hb=8512726adf455358d2e467dcc79fc9913ccbcf6b;hp=eef8039cb2061ac37cccad638d02349004e4d3fe;hpb=c511bb56f5ceff1e395d82c4bfd78e5c23aabab6;p=user%2Fhenk%2Fcode%2Finspircd.git

diff --git a/docs/conf/opers.conf.example b/docs/conf/opers.conf.example
index eef8039cb..c388230b4 100644
--- a/docs/conf/opers.conf.example
+++ b/docs/conf/opers.conf.example
@@ -15,20 +15,23 @@
      name="Shutdown"
 
      # commands: Oper-only commands that opers of this class can run.
-     commands="DIE RESTART REHASH LOADMODULE UNLOADMODULE RELOADMODULE GUNLOADMODULE GRELOADMODULE"
+     commands="DIE RESTART REHASH LOADMODULE UNLOADMODULE RELOADMODULE GLOADMODULE GUNLOADMODULE GRELOADMODULE"
 
      # privs: Special privileges that users with this class may utilise.
      #  VIEWING:
      #   - channels/auspex: allows opers with this priv to see more detail about channels than normal users.
      #   - users/auspex: allows opers with this priv to view more details about users than normal users, e.g. real host and IP.
+     #   - users/channel-spy: allows opers with this priv to view the private/secret channels that a user is on.
      #   - servers/auspex: allows opers with this priv to see more detail about server information than normal users.
      # ACTIONS:
      #   - users/mass-message: allows opers with this priv to PRIVMSG and NOTICE to a server mask (e.g. NOTICE $*)
      #   - users/samode-usermodes: allows opers with this priv to change the user modes of any other user using /SAMODE
      # PERMISSIONS:
+     #.  - channels/ignore-nonicks: allows opers with this priv to change their nick when on a +N channel.
      #   - users/flood/no-fakelag: prevents opers from being penalized with fake lag for flooding (*NOTE)
      #   - users/flood/no-throttle: allows opers with this priv to send commands without being throttled (*NOTE)
      #   - users/flood/increased-buffers: allows opers with this priv to send and receive data without worrying about being disconnected for exceeding limits (*NOTE)
+     #.  - users/callerid-override: allows opers with this priv to message people using callerid without being on their callerid list.
      #
      # *NOTE: These privs are potentially dangerous, as they grant users with them the ability to hammer your server's CPU/RAM as much as they want, essentially.
      privs="users/auspex channels/auspex servers/auspex users/mass-message users/flood/no-throttle users/flood/increased-buffers"
@@ -39,11 +42,11 @@
      # chanmodes: Oper-only channel modes that opers with this class can use.
      chanmodes="*">
 
-<class name="SACommands" commands="SAJOIN SAPART SANICK SAQUIT SATOPIC SAKICK SAMODE">
+<class name="SACommands" commands="SAJOIN SAPART SANICK SAQUIT SATOPIC SAKICK SAMODE OJOIN">
 <class name="ServerLink" commands="CONNECT SQUIT RCONNECT RSQUIT MKPASSWD ALLTIME SWHOIS JUMPSERVER LOCKSERV UNLOCKSERV" usermodes="*" chanmodes="*" privs="servers/auspex">
 <class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE TLINE RLINE CHECK NICKLOCK NICKUNLOCK SHUN CLONES CBAN CLOSE" usermodes="*" chanmodes="*">
 <class name="OperChat" commands="WALLOPS GLOBOPS" usermodes="*" chanmodes="*" privs="users/mass-message">
-<class name="HostCloak" commands="SETHOST SETIDENT CHGNAME CHGHOST CHGIDENT SETIDLE" usermodes="*" chanmodes="*" privs="users/auspex">
+<class name="HostCloak" commands="SETHOST SETIDENT SETIDLE CHGNAME CHGHOST CHGIDENT" usermodes="*" chanmodes="*" privs="users/auspex">
 
 
 #-#-#-#-#-#-#-#-#-#-#-#-  OPERATOR COMPOSITION   -#-#-#-#-#-#-#-#-#-#-#
@@ -68,7 +71,7 @@
 
     # modes: User modes besides +o that are set on an oper of this type
     # when they oper up. Used for snomasks and other things.
-    # Requires that m_opermodes.so be loaded.
+    # Requires the opermodes module be loaded.
     modes="+s +cCqQ">
 
 <type name="GlobalOp" classes="SACommands OperChat BanControl HostCloak ServerLink" vhost="ircop.omega.example.org">
@@ -97,26 +100,26 @@
       host="attila@inspircd.org *@2001:db8::/32"
 
       # ** ADVANCED ** This option is disabled by default.
-      # fingerprint: When using the m_sslinfo module, you may specify
+      # fingerprint: When using the sslinfo module, you may specify
       # a key fingerprint here. This can be obtained by using the /sslinfo
       # command while the module is loaded, and is also noticed on connect.
       # This enhances security by verifying that the person opering up has
       # a matching SSL client certificate, which is very difficult to
       # forge (impossible unless preimage attacks on the hash exist).
-      # If m_sslinfo isn't loaded, this option will be ignored.
+      # If the sslinfo module isn't loaded, this option will be ignored.
       #fingerprint="67cb9dc013248a829bb2171ed11becd4"
 
-      # autologin: If an SSL fingerprint for this oper is specified, you can
-      # have the oper block automatically log in. This moves all security of the
-      # oper block to the protection of the client certificate, so be sure that
-      # the private key is well-protected! Requires m_sslinfo.
+      # autologin: If an SSL certificate fingerprint for this oper is specified,
+      # you can have the oper block automatically log in. This moves all security
+      # of the oper block to the protection of the client certificate, so be sure
+      # that the private key is well-protected! Requires the sslinfo module.
       #autologin="on"
 
       # sslonly: If on, this oper can only oper up if they're using a SSL connection.
       # Setting this option adds a decent bit of security. Highly recommended
       # if the oper is on wifi, or specifically, unsecured wifi. Note that it
       # is redundant to specify this option if you specify a fingerprint.
-      # This setting only takes effect if m_sslinfo is loaded.
+      # This setting only takes effect if the sslinfo module is loaded.
       #sslonly="yes"
 
       # vhost: Overrides the vhost in the type block. Class and modes may also
@@ -130,8 +133,8 @@
 # Operator with a plaintext password and no comments, for easy copy & paste.
 <oper
       name="Brain"
-      password="s3cret"
-      host="brain@dialup15.isp.com *@localhost *@example.com *@2001:db8::/32"
+      password="youshouldhashthis"
+      host="brain@dialup15.isp.test.com *@localhost *@example.com *@2001:db8::/32"
       #fingerprint="67cb9dc013248a829bb2171ed11becd4"
       type="NetAdmin">
 
@@ -141,18 +144,18 @@
       # Remember: This is case sensitive.
       name="Adam"
 
-      # hash: What hash this password is hashed with.
-      # Requires the module for selected hash (m_md5.so, m_sha256.so
-      # or m_ripemd160.so) be loaded and the password hashing module
-      # (m_password_hash.so) loaded.
-      # Options here are: "md5", "sha256" and "ripemd160", or one of
-      # these prefixed with "hmac-", e.g.: "hmac-sha256".
+      # hash: the hash function this password is hashed with. Requires the
+      # module for the selected function (bcrypt, md5, sha1, or sha256) and
+      # the password hashing module (password_hash) to be loaded.
+      #
+      # You may also use any of the above other than bcrypt prefixed with
+      # either "hmac-" or "pbkdf2-hmac-" (requires the pbkdf2 module).
       # Create hashed passwords with: /mkpasswd <hash> <password>
-      hash="hmac-sha256"
+      hash="bcrypt"
 
       # password: A hash of the password (see above option) hashed
-      # with /mkpasswd <hash> <password>. See m_password_hash in modules.conf
-      # for more information about password hashing.
+      # with /mkpasswd <hash> <password>. See the password_hash module
+      # in modules.conf for more information about password hashing.
       password="qQmv3LcF$Qh63wzmtUqWp9OXnLwe7yv1GcBwHpq59k2a0UrY8xe0"
 
       # host: What hostnames and IPs are allowed to use this operator account.