X-Git-Url: https://git.netwichtig.de/gitweb/?a=blobdiff_plain;f=docs%2Finspircd.conf.example;h=3ea4d4190ebccc3a97a397a1c0b1fc9f47c6cf7c;hb=d5207987511ac58cb8e7496128b8811c93c5180e;hp=b098eb744235de8a8fe04932750c555727f34b05;hpb=125f9c37da8feeb91cec683310f3f67bac39e39e;p=user%2Fhenk%2Fcode%2Finspircd.git diff --git a/docs/inspircd.conf.example b/docs/inspircd.conf.example index b098eb744..b4c49332d 100644 --- a/docs/inspircd.conf.example +++ b/docs/inspircd.conf.example @@ -20,10 +20,7 @@ # This is an example of the config file for InspIRCd. # # Change the options to suit your network # # # -# Last updated on : 04/09/2006 # -# Written by : CC (cc@backchat.co.za) # -# Updated by : katsklaw (katsklaw@gmail.com) # -# Updated by : brain (brain@inspircd.org) # +# $Id$ # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # @@ -51,8 +48,33 @@ # # # # # # +# The server name should be a syntactically valid hostname, with at # +# least one '.', and does not need to resolve to an IP address. # +# # +# The description is freeform text. Remember you may put quotes in # +# this field by escaping it using \". # +# # +# The network field indicates the network name given in on connect # +# to clients. It is used by many clients such as mIRC to select a # +# perform list, so it should be identical on all servers on a net # +# and should not contain spaces. # +# # +# The server ID is optional, and if omitted automatically calculated # +# from the server name and description. This is similar in # +# in behaviour to the server id on ircu and charybdis ircds. # +# You should only need to set this manually if there is a collision # +# between two server ID's on the network. The server ID must be # +# three digits or letters long, of which the first digit must always # +# be a number, and the other two letters may be any of 0-9 and A-Z. # +# For example, 3F9, 03J and 666 are all valid server IDs, and A9D, # +# QFX and 5eR are not. Remember, in most cases you will not need to # +# even set this value, it is calculated for you from your server # +# name and description. Changing these will change your auto- # +# generated ID. # +# # # # # - + #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # Enter the port and address bindings here. # # # -# bind address - specifies which address ports bind to. Leaving this # -# field blank binds the port to all IPs available. # +# bind address - Specifies which address ports bind to. Leaving this # +# field blank binds the port to all IP's available. # # # # port - The port number to bind to. You may specify a port # # range here, e.g. "6667-6669,7000,7001". If you do # # this, the server will count each port within your # -# range as a seperate binding, making the above # -# example equivalent to five seperate bind tags. # +# range as a separate binding, making the above # +# example equivalent to five separate bind tags. # # A failure on one port in the range does not prevent # # the entire range from being bound, just that one # # port number. # # # -# type - can be 'clients' or 'servers'. The clients type is # -# a standard tcp based socket, the servers type is a # +# type - Can be 'clients' or 'servers'. The clients type is # +# a standard TCP based socket, the servers type is a # # also a TCP based connection but of a different # # format. SSL support is provided by modules, to # # enable SSL support, please read the module section # @@ -100,15 +122,15 @@ # # # ssl - When using m_ssl_gnutls.so or m_ssl_openssl.so # # modules, you must define this value to use ssl on # -# that port. valid values are 'gnutls' or 'openssl' # +# that port. Valid values are 'gnutls' or 'openssl' # # respectively. If the module is not loaded, this # # setting is ignored. # # # # transport - If you have m_spanningtree.so loaded, along with # -# either of the SSL modules (m_ssl_gnutls or # +# either one of the SSL modules (m_ssl_gnutls or # # m_ssl_openssl) or m_ziplinks.so, then you may make # # use of this value. # -# setting it to 'openssl' or 'gnutls' or 'zip' # +# Setting it to 'openssl' or 'gnutls' or 'zip' # # indicates that the port should accept connections # # using the given transport name. Transports are # # layers which sit on top of a socket and change the # @@ -124,7 +146,7 @@ # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # If you want to link servers to InspIRCd you must load the # -# m_spanningtree module! Please see the modules list below for # +# m_spanningtree.so module! Please see the modules list below for # # information on how to load this module! If you do not load this # # module, server ports will NOT be bound! # # # @@ -135,11 +157,21 @@ # # # # # # -# If InspIRCd is built for IPV6, and you wish to accept IPV4 clients, # -# then you must specify your IPV6 clients in the following form: # -# ::ffff:1.2.3.4, where 1.2.3.4 is the IPV4 address to bind the # -# port on. If InspIRCd is built for IPV4 connections (this is the # -# default) then you do not need to prefix your addresses like this. # +# If InspIRCd is built for IPv6, and you wish to accept IPv4 clients, # +# then you can specify IPv4 ip addresses here to bind. You may also # +# use the 4in6 notation, ::ffff:1.2.3.4, where 1.2.3.4 is the IPv4 # +# address to bind the port, but as of InspIRCd 1.1.1, this is not # +# required. # +# # +# ------------------------------------------------------------------- # +# # +# PLEASE NOTE: If you have build InspIRCd as an IPv6 server, and you # +# specify an empty bind address, the binding will be bound to ALL THE # +# IPv6 IP ADDRESSES, and not the IPv4 addresses. If you are using an # +# IPv6 enabled InspIRCd and want to bind to multiple IPv4 addresses # +# in this way, you must specify them by hand. If you have built the # +# server for IPv4 connections only, then specifying an empty bind # +# address binds the port to all IPv4 IP addresses, as expected. # # # @@ -156,7 +188,7 @@ #-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#- # # # You can configure the passwords here which you wish to use for # -# the die and restart commands. Only trusted ircops who will # +# the die and restart commands. Only trusted IRCop's who will # # need this ability should know the die and restart password. # # # # Syntax is as follows: # @@ -164,7 +196,7 @@ # pause="secs before dying"> # # # - + #-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -178,35 +210,57 @@ # config file inspircd.conf, unless the filename starts with a forward# # slash (/) in which case it is treated as an absolute path. # # # +# You may also include an executable file, in which case if you do so # +# the output of the executable on the standard output will be added # +# to your config at the point of the include tag. # +# # # Syntax is as follows: # # # +# # # # #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # This is where you can configure which connections are allowed # -# and denied access onto your server. # -# The password is optional. # -# You may have as many of these as you require. # -# To allow/deny all connections use a * # +# and denied access onto your server. The password is optional. # +# You may have as many of these as you require. To allow/deny all # +# connections, use a '*' or 0.0.0.0/0. # # # # Syntax is as follows: # # # -# # -# # -# # -# # -# # -# # -# # -# # +# # +# # +# # +# # +# # # # # IP masks may be specified in CIDR format or wildcard format, # -# for IPV4 and IPV6. # +# for IPv4 and IPv6. You *cannot* use hostnames in the allow or # +# deny field, as the state is applied before the user's DNS has # +# been resolved. # +# # +# You can optionally name your connect allow/deny tags. If you do # +# this, you may reference this connect tag as the parent of another # +# connect tag with the option as shown above. If # +# you do this, any options not explicitly specified in the tag will # +# be copied from the parent. # +# # +# If the value maxchans is included, this overrides all other max # +# channels related settings, including the separate oper maximum. # +# You may set this to any (sane) value you wish and it applies to # +# all users within this connect tag. # # # # You may optionally include timeout="x" on any allow line, which # # specifies the amount of time given before an unknown connection # -# is closed if USER/NICK/PASS are not given. This value is in secs # +# is closed if USER/NICK/PASS are not given. This value is in secs. # +# # +# You may optionally limit the number of clients that are matched # +# by a single tag by specifying the maximum in the limit # +# parameter. If set to 0, there is no limit, which is the default. # # # # You should also include a flood="x" line which indicates # # the number of lines a user may place into their buffer at once # @@ -224,7 +278,7 @@ # settings as shown in the full example below. # # The ping frequency is specified in seconds, and the sendq size # # in bytes. It is recommended, although not enforced, that you # -# should never set your sendq size to less than 8k. Send Queues are # +# should never set your sendq size to less than 8K. Send Queues are # # dynamically allocated and can grow as needed up to the maximum # # size specified. # # # @@ -234,7 +288,6 @@ # receive more than they send in normal circumstances. The default # # if not specified is 4096. # # # -# IMPORTANT NOTE, CALL THE CONFUSION POLICE! # # The sendq is the data waiting to be sent TO THE USER. # # The recvq is the data being received FROM THE USER. # # The names sendq and recvq are from the SERVER'S PERSPECTIVE not # @@ -251,9 +304,29 @@ # but if they can connect again to B, there are three. You get the # # idea (i hope). # # # +# The optional port value determines which port the connect tag is # +# handling. If left out the connect tag covers all bound ports else # +# only incoming connections on the specified port will match. Port # +# tags may be used on connect allow and connect deny tags. # +# # +# The limit value determines the maximum number of users which may # +# be in this class. Combine this with CIDR masks for various ISP # +# subnets to limit the number of users which may connect at any one # +# time from a certain ISP. Omit this value to not limit the tag. # +# # - - + + + @@ -261,14 +334,22 @@ #-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # -# Classes are a group of commands which are grouped together # -# and given a unique name. They used to define which commands # +# Classes are a group of commands which are grouped together and # +# given a unique name. They're used to define which commands # # are available to certain types of Operators. # # # # Syntax is as follows: # # # -# # +# # # # +# The name value indicates a name for this class. # +# The commands value indicates a list of one or more commands that # +# are allowed by this class (see also 'READ THIS BIT' below). # +# The usermodes and chanmodes values indicate lists of usermodes and # +# channel modes this oper can execute. This only applies to modes # +# that are marked oper-only such as usermode +Q and channelmode +O. # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # # | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | # @@ -285,11 +366,11 @@ # however it is provided for fast configuration (e.g. in test nets) # # # - - - - - + + + + + #-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-# @@ -298,17 +379,17 @@ # your server, as well as the commands they are allowed to use. # # This works alongside with the classes specified above. # # # -# type name - a name for the combined class types # +# type name - A name for the combined class types. # # a type name cannot contain spaces, however if you # # put an _ symbol in the name, it will be translated # # to a space when displayed in a WHOIS. # # # -# classes - specified above, used for flexibility for the # +# classes - Specified above, used for flexibility for the # # server admin to decide on which operators get # # what commands. Class names are case sensitive, # -# seperate multiple class names with spaces. # +# separate multiple class names with spaces. # # # -# host - optional hostmask operators will receive on oper-up. # +# host - Optional hostmask operators will receive on oper-up. # # # # Syntax is as follows: # # # @@ -333,20 +414,20 @@ #-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # Opers are defined here. This is a very important section. # -# Remember to only make operators out of truthworthy people. # +# Remember to only make operators out of trust worthy people. # # # -# name - oper name, This is case sensitive, so it is best to # +# name - Oper name, this is case sensitive, so it is best to # # use lower-case. # # # -# password - password to oper-up, also case sensitive. # +# password - Password to oper-up, also case sensitive. # # encryption is supported via modules. You may load # # modules for MD5 or SHA256 encryption, and if you do, # # this value will be a hash value, otherwise put a # # plaintext password in this value. # # # -# host - hosts of client allowed to oper-up. # -# wildcards accepted, seperate multiple hosts with a # -# space. You may also specify CIDR ip addresses. # +# host - Hosts of client allowed to oper-up. # +# wildcards accepted, separate multiple hosts with a # +# space. You may also specify CIDR IP addresses. # # # # fingerprint - When using the m_ssl_oper_cert.so module, you may # # specify a key fingerprint here. This can be obtained # @@ -355,7 +436,7 @@ # connect to the ircd using a client certificate, # # and will lock this oper block to only the user who # # has that specific key/certificate pair. # -# This enhances security a great deal, however it # +# this enhances security a great deal, however it # # requires that opers use clients which can send ssl # # client certificates, if this is configured for that # # oper. Note that if the m_ssl_oper.so module is not # @@ -374,11 +455,10 @@ # type="oper type"> # # # - + #-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-# @@ -386,15 +466,15 @@ # Defines which servers can link to this one, and which servers this # # server may create outbound links to. # # # -# name - The name is the canocial name of the server, does # +# name - The name is the canonical name of the server, does # # not have to resolve - but it is expected to be set # # in the remote servers connection info. # # # -# ipaddr - Valid host or ip address for remote server. These # +# ipaddr - Valid host or IP address for remote server. These # # hosts are resolved on rehash, and cached, if you # -# specify a hostname, so if you find that your server # +# specify a hostname; so if you find that your server # # is still trying to connect to an old IP after you # -# have updated your dns, try rehashing and then # +# have updated your DNS, try rehashing and then # # attempting the connect again. # # # # port - The TCP port for the remote server. # @@ -419,12 +499,12 @@ # link to succeed. OpenSSL and GnuTLS are link- # # compatible with each other. # # # -# hidden - When using m_spanningtree.so for linking. you may # +# statshidden - When using m_spanningtree.so for linking. you may # # set this to 'yes', and if you do, the IP address/ # # hostname of this connection will NEVER be shown to # -# any opers on the network. In /STATS c its address # +# any opers on the network. In /stats c its address # # will show as *@, and during CONNECT and # -# inbound connections, its IP will show as # +# inbound connections, it's IP will show as # # UNLESS the connection fails (e.g. due to a bad # # password or servername) # # # @@ -459,7 +539,33 @@ # seconds. If this is not defined, the default of ten # # seconds is used. # # # -# to u:line a server (give it extra privilages required for running # +# bind - If you specify this value, then when creating an # +# outbound connection to the given server, the IP you # +# place here will be bound to. This is for multi- # +# homed servers which may have multiple IP addresses. # +# if you do not define this value, the first IP that # +# is not empty or localhost from your tags # +# will be bound to. This is usually acceptable, # +# however if your server has multiple network cards # +# then you may have to manually specify the bind # +# value instead of leaving it to automatic binding. # +# you can usually tell if you need to set this by # +# looking for the error 'Could not assign requested # +# address' in your log when connecting to servers. # +# # +# hidden - If this is set to true, yes, or 1, then the server # +# is completely hidden from non-opers. It does not # +# show in /links and it does not show in /map. Also, # +# any servers which are child servers of this one # +# in the network will *also* be hidden. Use with # +# care! You can use this to 'mask off' sections of # +# the network so that users only see a small portion # +# of a much larger net. It should NOT be relied upon # +# as a security tool, unless it is being used for # +# example to hide a non-client hub, for which clients # +# do not have an IP address or resolvable hostname. # +# # +# To u:line a server (give it extra privileges required for running # # services, Q, etc) you must include the tag as shown # # in the example below. You can have as many of these as you like. # # # @@ -467,11 +573,17 @@ # that server to operoverride modes. This should only be used for # # services and protected oper servers! # # # -# NOTE: If you have built InspIRCd with IPV6 support, and you want # -# to link to an IPV4 server, you must specify the IP address in the # -# form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target # -# server. If you have built InspIRCd for IPV4 (this is the default) # -# you should not prefix your IP addresses in this fashion. # +# ------------------------------------------------------------------- # +# # +# NOTE: If you have built your server as an IPv6 server, then when a # +# DNS lookup of a server's host occurs, AAAA records (IPv6) are # +# prioritised over A records (IPv4). Therefore, if the server you are # +# connecting to has both an IPv6 IP address and an IPv4 IP address in # +# its DNS entry, the IPv6 address will *always* be selected. To # +# change this behaviour simply specify the IPv4 IP address rather # +# than the hostname of the server. # +# # +# ------------------------------------------------------------------- # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # @@ -480,7 +592,7 @@ # |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) # # # # If you want to link servers to InspIRCd you must load the # -# m_spanningtree module! Please see the modules list below for # +# m_spanningtree.so module! Please see the modules list below for # # information on how to load this module! If you do not load this # # module, server links will NOT work! # # # @@ -492,43 +604,71 @@ # # + ipaddr="penguin.box.com" + port="7000" + allowmask="69.58.44.0/24" + autoconnect="300" + failover="hub.other.net" + timeout="15" + transport="gnutls" + bind="1.2.3.4" + statshidden="no" + hidden="no" + sendpass="outgoing!password" + recvpass="incoming!password"> + ipaddr="localhost" + port="7000" + allowmask="127.0.0.0/8" + sendpass="penguins" + recvpass="polarbears"> - + +#-#-#-#-#-#-#-#-#-#-#-#- ULINES CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# +# This tag defines a ulined server. A U-Lined server has special # +# permissions, and should be used with caution. Services servers are # +# usually u-lined in this manner. # +# # +# The 'silent' value, if set to yes, indicates that this server should# +# not generate quit and connect notices, which can cut down on noise # +# to opers on the network. # +# # + #-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-# # # # These options let you define the path to your motd and rules # # files. If these are relative paths, they are relative to the # -# configurtion directory. # +# configuration directory. # # # - + + +#-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# This optional configuration tag lets you define the maximum number # +# of channels that both opers and users may be on at any one time. # +# The default is 20 for users and 60 for opers if this tag is not # +# defined. Remote users are not restricted in any manner. # +# # + + #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define your DNS server address here. InspIRCd has its own resolver. # -# If you do not define this value, the first dns server from your # -# /etc/resolv.conf file is read. If no entries are found in this file # -# or the file cannot be opened, the default value '127.0.0.1' is used # -# instead. The timeout value is in seconds. # +# If you do not define this value, then InspIRCd will attempt to # +# determine your DNS server from your operating system. On POSIX # +# platforms, InspIRCd will read /etc/resolv.conf, and populate this # +# value with the first DNS server address found. On Windows platforms # +# InspIRCd will check the registry, and use the DNS server of the # +# first active network interface, if one exists. # +# If a DNS server cannot be determined from these checks, the default # +# value '127.0.0.1' is used instead. The timeout value is in seconds. # # # # ____ _ _____ _ _ ____ _ _ _ # # | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | # @@ -538,34 +678,31 @@ # # # When choosing a server, be sure to choose one which will do a # # RECURSIVE LOOKUP. InspIRCd's resolver does not currently do these # -# recursive lookups itself, to save time and resources. The dns # +# recursive lookups itself, to save time and resources. The DNS # # server recommended by the InspIRCd team is bind, available from the # # ISC website. If your DNS server does not do a recursive lookup, you # # will be able to notice this by the fact that none of your users are # # resolving even though the DNS server appears to be up! Most ISP and # # hosting provider DNS servers support recursive lookups. # # # -# NOTE: If you have built InspIRCd with IPV6 support, and you want # -# to use an IPV4 nameserver, you must specify the IP address in the # -# form '::ffff:1.2.3.4' where 1.2.3.4 is the IP address of the target # -# server. If you have built InspIRCd for IPV4 (this is the default) # -# you should not prefix your IP addresses in this fashion. # +# ------------------------------------------------------------------- # # # -# IF YOUR RESOLV.CONF CONTAINS ONLY IPV4 ADDRESSES, AND YOU ARE USING # -# IPV6, YOU MUST DEFINE THE TAG, AND USE THE ::FFFF # -# PREFIX NOTATION. IF YOU DO NOT, HOSTS WILL *NOT* RESOLVE. # +# NOTE: If you have built InspIRCd with IPv6 support, then both # +# IPv6 and IPv4 addresses are allowed here, and also in the system # +# resolv.conf file. Remember that an IPv4 DNS server can still # +# resolve IPv6 addresses, and vice versa. # # # -# An example of using IPV4 nameservers over IPV6 -# +# An example of using an IPv6 nameserver +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define the path to the PID file here. The PID file can be used to # # rehash the ircd from the shell or to terminate the ircd from the # -# shell using shell scripts, perl scripts etc, and to monitor the # +# shell using shell scripts, perl scripts, etc... and to monitor the # # ircd's state via cron jobs. If this is a relative path, it will be # # relative to the configuration directory, and if it is not defined, # # the default of 'inspircd.pid' is used. # @@ -576,7 +713,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Use these tags to customise the ban limits on a per channel basis. # -# the tags are read from top to bottom, and any tag found which # +# The tags are read from top to bottom, and any tag found which # # matches the channels name applies the banlimit to that channel. # # It is advisable to put an entry with the channel as '*' at the # # bottom of the list. If none are specified or no maxbans tag is # @@ -610,25 +747,42 @@ #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # -# Settings to define which features are useable on your server. # +# Settings to define which features are usable on your server. # +# # +# prefixquit - A prefix to be placed on the start of a client's # +# quit message # +# # +# suffixquit - A suffix to be placed on the end of a client's # +# quit message. # # # -# prefixquit - a prefix for a client's quit message # +# fixedquit - A fixed quit message to display for all client # +# QUITS. If specified, overrides both prefixquit # +# and suffixquit options. # # # -# loglevel - specifies what detail of messages to log in the # -# log file. You may select from debug, verbose, # -# default, sparse and none. # +# prefixpart - A prefix to be placed on the start of a client's # +# part message # # # -# allowhalfop - allows the +h channel mode # +# suffixpart - A suffix to be placed on the end of a client's # +# part message. # +# # +# fixedpart - A fixed part message to display for all client # +# parts. If specified, overrides both prefixpart # +# and suffixpart options. # +# # +# allowhalfop - Allows the +h channel mode # # # # noservices - If noservices is true, yes, or 1, then the first # # user into a channel gets founder status. This is # # only useful on networks running the m_chanprotect # # module without services. # # # -# qaprefixes - If qaprefixes is true, yes, or 1, then users # -# with +q or +a will get the ~ or & prefixes # -# used in unreal. This is only useful on networks # -# running the m_chanprotect module # +# qprefix - qprefix is used by the chanprotect module to give # +# a visible prefix to users set +q (founder) in chan # +# It should be set to something sensible like ~ or ! # +# If not set, no prefix is applied to users with +q # +# # +# aprefix - aprefix is the same as qprefix, except it is for # +# giving users with mode +a (protected) a prefix # # # # deprotectself - If this value is set to yes, true, or 1, then any # # user with +q or +a may remove the +q or +a from # @@ -636,6 +790,12 @@ # this feature, which stops even the founder taking # # away their founder status without using services. # # # +# deprotectothers-If this value is set to yes, true, or 1, then any # +# user with +q or +a may remove the +q or +a from # +# other users. The default setting is to not enable # +# this feature, so that only +q may remove +a, and # +# nothing but services may remove +q. # +# # # cyclehosts - If this is set to true, yes or 1, then when a # # user's hostname changes, they will appear to quit # # and then rejoin with their new host. This prevents # @@ -643,15 +803,90 @@ # especially in the case of bots, and it is # # recommended that this option is enabled. # # # -# netbuffersize - size of the buffer used to receive data from # -# clients. The ircd may only read() this amount # -# of text in one go at any time. (OPTIONAL) # +# moduledir - This optional value indicates a runtime change of # +# the location where modules are to be found. This # +# does not add a supplementary directory. There can # +# only be one module path. # +# # +# syntaxhints - If set to yes, true or 1, when a user does not # +# give enough parameters for a command, a syntax # +# hint will be given (using the RPL_TEXT numeric) # +# as well as the standard ERR_NEEDMOREPARAMS. # +# # +# announcets - If this value is defined to yes, true, or 1, then # +# a channels' timestamp is updated, the users on # +# the channel will be informed of the change via # +# a server notice to the channel with the old and # +# new TS values in the timestamp. If you think this # +# is just pointless noise, define the value to 0. # +# # +# ircumsgprefix - Use undernet style message prefix for channel # +# NOTICE and PRIVMSG adding the prefix to the line # +# of text sent out. Eg. NOTICE @#test :@ testing # +# vs. the off setting: NOTICE @#test :testing # +# # +# hostintopic - If this is set to yes (the default) then the full # +# nick!user@host is shown for who set a TOPIC last. # +# if set to no, then only the nickname is shown. # +# # +# serverpingfreq- This value, when set, allows you to change the # +# frequency of server to server PING messages. This # +# can help if you are having certain network issues. # +# # +# pingwarning - This should be set to a number between 1 and 59 if # +# defined, and if it is defined will cause the server# +# to send out a warning via snomask +l if a server # +# does not answer to PING after this many seconds. # +# This can be useful for finding servers which are # +# at risk of pinging out due to network issues. # +# # +# exemptchanops - This option allows channel operators to be exempted# +# from certain channel modes. # +# Supported modes are +SfFgNc. Defaults to off. # +# # +# defaultmodes - The default modes to be given to each channel on # +# creation. Defaults to 'nt'. There should be no + # +# or - symbols in this sequence, if you add them # +# they will be ignored. You may add parameters for # +# modes which take them. # +# # +# moronbanner - The NOTICE to show to users who are glined, zlined # +# klined or qlined when they are disconnected. This # +# is totally freeform, you may place any text here # +# you wish. # +# # + + + + +#-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-# # # # maxwho - The maximum number of results returned by a /WHO # # query. This is to prevent /WHO being used as a # # spam vector or means of flooding an ircd. The # # default is 128, it is not recommended to raise it # -# above 1024. Values up to 65535 are permitted. # +# above 1024. Values up to 65535 are permitted. If # +# this value is omitted, any size WHO is allowed by # +# anyone. # # # # somaxconn - The maximum number of sockets that may be waiting # # in the accept queue. This usually allows the ircd # @@ -663,38 +898,70 @@ # be up to 5 (ugh) while others such as FreeBSD will # # default to a much nicer 128. # # # -# moduledir - This optional value indicates a runtime change of # -# the location where modules are to be found. This # -# does not add a supplementary directory. There can # -# only be one module path. # -# # # softlimit - This optional feature allows a defined softlimit. # # if defined sets a soft maxconnections value, has # # to be less than the ./configure maxclients # # # -# userstats - The userstats field is optional and specifies # -# which stats characters in /STATS may be requested # -# by non-operators. Stats characters in this field # -# are case sensitive and are allowed to users # -# independent of if they are in a module or the core # +# nouserdns - If set to yes, true or 1, no user DNS lookups # +# will be performed for connecting users. This can # +# save a lot of resources on very busy IRC servers. # # # -# operspywhois - If this is set then when an IRC operator uses # -# /WHOIS on a user they will see all channels, even # -# ones if channels are secret (+s), private (+p) or # -# if the target user is invisible +i. # +# quietbursts - When synching or splitting from the network, a # +# server can generate a lot of connect and quit # +# snotices to the +C and +Q snomasks. Setting this # +# value to yes squelches those messages, which can # +# make them more useful for opers, however it will # +# degrade their use by certain third party programs # +# such as BOPM which rely on them to scan users when # +# a split heals in certain configurations. # # # -# customversion - If you specify this configuration item, and it is # -# not set to an empty value, then when a user does # -# a /VERSION command on the ircd, this string will # -# be displayed as the second portion of the output, # -# replacing the system 'uname', compile flags and # -# socket engine/dns engine names. You may use this # -# to enhance security, or simply for vanity. # +# netbuffersize - Size of the buffer used to receive data from # +# clients. The ircd may only read() this amount # +# of text in one go at any time. (OPTIONAL) # # # -# maxtargets - The maxtargets field is optional, and if not # -# defined, defaults to 20. It indicates the maximum # -# number of targets which may be given to commands # -# such as PRIVMSG, KICK etc. # + + + +#-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-# +# # +# announceinvites # +# - If this option is set, then invites are announced # +# to the channel when a user invites another user. # +# If you consider this to be unnecessary noise, # +# set this to 'none'. To announce to all ops, set # +# this to 'ops' and to announce to all users set the # +# value to 'all'. # +# # +# The value 'dynamic' varies between 'ops' and 'all' # +# settings depending on if the channel is +i or not. # +# When the channel is +i, messages go only to ops, # +# and when the channel is not +i, messages go to # +# everyone. In short, the messages will go to every # +# user who has power of INVITE on the channel. This # +# is the recommended setting. # +# # +# disablehmac - If you are linking your InspIRCd to older versions # +# then you can specify this option and set it to # +# yes. 1.1.6 and above support HMAC and challenge- # +# response for password authentication. These can # +# greatly enhance security of your server to server # +# connections when you are not using SSL (as is the # +# case with a lot of larger networks). Linking to # +# older versions of InspIRCd should not *usually* be # +# a problem, but if you have problems with HMAC # +# authentication, this option can be used to turn it # +# off. # +# # +# hidemodes - If this option is enabled, then the listmodes # +# given (e.g. +eI), will be hidden from users below # +# halfop. This is not recommended to be set on mode # +# +b, as it may break some features in popular # +# clients such as mIRC. # # # # hidesplits - When set to 'yes', will hide split server names # # from non-opers. Non-opers will see '*.net *.split' # @@ -715,71 +982,95 @@ # actual server the user is on. # # # # flatlinks - When you are using m_spanningtree.so, and this # -# value is set to true, yes or 1, /MAP and /LINKS # -# will be flattened when shown to a non-oper. # +# value is set to yes, true or 1, /MAP and /LINKS # +# will be flattened when shown to a non-opers. # # # # hideulines - When you are using m_spanningtree.so, and this # -# value is set to true, yes or 1, then U-lined # -# servers will be hidden in /LINKS and /MAP. For non # +# value is set to yes, true or 1, then U-lined # +# servers will be hidden in /LINKS and /MAP for non # # opers. Please be aware that this will also hide # # any leaf servers of a U-lined server, e.g. jupes. # # # -# nouserdns - If set to 'yes', 'true' or '1', no user dns # -# lookups will be performed for connecting users. # -# this can save a lot of resources on very busy irc # -# servers. # +# userstats - The userstats field is optional and specifies # +# which stats characters in /STATS may be requested # +# by non-operators. Stats characters in this field # +# are case sensitive and are allowed to users # +# independent of if they are in a module or the core # # # -# syntaxhints - If set to 'yes', 'true' or '1', when a user does # -# not give enough parameters for a command, a syntax # -# hint will be given (using the RPL_TEXT numeric) # -# as well as the standard ERR_NEEDMOREPARAMS. # +# operspywhois - If this is set then when an IRC operator uses # +# /WHOIS on a user they will see all channels, even # +# ones if channels are secret (+s), private (+p) or # +# if the target user is invisible +i. # # # -# announcets - If this value is defined to 'yes', 'true' or '1', # -# then if a channel's timestamp is updated the users # -# on the channel will be informed of the change via # -# a server notice to the channel with the old and # -# new TS values in the timestamp. If you think this # -# is just pointless noise, define the value to 0. # +# customversion - If you specify this configuration item, and it is # +# not set to an empty value, then when a user does # +# a /VERSION command on the ircd, this string will # +# be displayed as the second portion of the output, # +# replacing the system 'uname', compile flags and # +# socket engine/dns engine names. You may use this # +# to enhance security, or simply for vanity. # # # -# ircumsgprefix - Use undernet style message prefix for channel # -# NOTICE and PRIVMSG adding the prefix to the line # -# of text sent out. Eg. NOTICE @#test :@ testing # -# vs off: NOTICE @#test :testing # -# -# notimesync - If this value is 'yes', 'true', or '1', time # -# synchronization is disabled on this server. This # -# means any servers you are linked to will not # -# automatically synchronize time with you, and in # -# most cases will just result in more bounced modes # -# on netsplits. This option should be the same on # -# all servers. # +# maxtargets - The maxtargets field is optional, and if not # +# defined, defaults to 20. It indicates the maximum # +# number of targets which may be given to commands # +# such as PRIVMSG, KICK etc. # # # - + + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Logging +# ------- +# +# Logging is covered with the tag, which you may use to change +# the behaviour of the logging of the IRCd. +# +# In InspIRCd as of 1.2, logging is pluggable and very extensible. +# Different files can log the same thing, different 'types' of log can +# go to different places, and modules can even extend the log tag +# to do what they want. +# +# An example log tag would be: +# +# which would log all information on /oper (failed and successful) to +# a file called opers.log. +# +# There are many different types which may be used, and modules may +# generate their own. A list of useful types: +# - USERS - information relating to user connection and disconnection +# - CHANNELS - information relating to joining and parting of channels. +# XXX someone doc more on this +# +# You may also log *everything* by using a type of *, and subtract things out +# of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT". +# +# Channel Logging +# --------------- +# +# I'm aware this would probably better belong in the modules section, but this +# is heavily interrelated to logging, and as such will be documented here. +# +# m_chanlog is one of the modules which can alter logging to it's own thing. +# An example of this may be: +# +# +# +# +# The following log tag is highly default and uncustomised. It is recommended you +# sort out your own log tags. This is just here so you get some output. + #-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # @@ -864,8 +1155,10 @@ # usually for cryptographic uses and security. # # IMPORTANT: -# Other modules such as m_opermd5.so may rely on this module being -# loaded to function. +# Other modules such as m_password_hash.so may rely on this module being +# loaded to function. Certain modules such as m_spanningtree.so will +# function without this module but when it is loaded their features will +# be enhanced (for example the addition of HMAC authentication). # # @@ -908,7 +1201,7 @@ # command "foo bar baz qux quz" then $3- will hold # # "baz qux quz" and $2 will contain "bar". You may # # also use the special variables: $nick, $ident, # -# $host and $vhost, and you may seperate multiple # +# $host and $vhost, and you may separate multiple # # commands with \n. If you wish to use the ACTUAL # # characters \ and n together in a line, you must # # use the sequence "\\n". # @@ -947,6 +1240,13 @@ # # +# This alias fixes a glitch in xchat 2.6.x and above and the way it +# assumes IDENTIFY must be prefixed by a colon (:) character. It should +# be placed ABOVE the default NICKSERV alias (the first example) listed +# above. +# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Alltime module: Shows time on all connected servers at once @@ -961,10 +1261,35 @@ # Antibottler module: Labels bottler leech bots # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Auditorium module: Adds channel mode +u which makes everyone else +# except you in the channel invisible, used for large meetings etc. +# +# +# Auditorium settings: +# +# +# +# showops: +# Setting this value to yes makes m_auditorium behave like unrealircd +# +u channel mode, e.g. ops see users joining, parting, etc, and users +# joining the channel see the ops. Without this flag, the mode acts +# like ircnet's +a (anonymous channels), showing only the user in the +# names list, and not even showing the ops in the list, or showing the +# ops that the user has joined. +# operoverride: +# Setting this value to yes makes m_auditorium affect the userlist for +# regular users only. Opers will view all users in the channel normally. + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Ban except module: Adds support for channel ban exceptions (+e) # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Ban redirection module: Allows bans which redirect to a specified +# channel. e.g. +b nick!ident@host#channelbanneduserissentto +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block amsg module: Attempt to block all usage of /amsg and /ame # @@ -983,7 +1308,7 @@ # #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Block CAPS module: Blocking all-CAPS messages with cmode +P +# Block CAPS module: Blocking all-CAPS messages with cmode +B # # # #-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# @@ -994,7 +1319,13 @@ # minlen - The minimum length a line must be for the block # # percent to have any effect. # # # -# +# capsmap - A list of chars to be considered CAPS, this was # +# you can add CAPS for your language. Also you can # +# add things like ! and space to further lock down # +# on caps usage. # +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Block colour module: Blocking colour-coded messages with cmode +c @@ -1004,6 +1335,27 @@ # Botmode module: Adds the user mode +B # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# CallerID module: Adds usermode +g which activates hybrid-style +# callerid (== block all private messages unless you /accept first) +# +# +#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# +# maxaccepts - Maximum number of entires a user can add to his # +# /accept list. Default is 16 entries. # +# operoverride - Can opers (note: ALL opers) ignore callerid mode? # +# Default is no. # +# tracknick - Preserve /accept entries when a user changes nick? # +# If no (the default), the user is removed from # +# everyone's accept list if he changes nickname. # +# cooldown - Amount of time (in seconds) that must pass since # +# the last notification sent to a user before he can # +# be sent another. Default is 60 (1 minute). # +# @@ -1020,6 +1372,53 @@ # # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# CGI:IRC module: Adds support for automatic host changing in CGI:IRC +# (http://cgiirc.sourceforge.net). +# +# +#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# +# +# Optional - If you specify to use m_cgiirc, then you must specify one +# or more cgihost tags which indicate authorised CGI:IRC servers which +# will be connecting to your network, and an optional cgiirc tag. +# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module +# +# Set to yes if you want to notice opers when CGI clients connect +# +# +# The type field indicates where the module should get the real +# client's IP address from, for further information, please see the +# CGI:IRC documentation. +# +# Old style: +# # Get IP from PASS +# # Get IP from ident +# # See the docs +# New style: +# # Get IP from WEBIRC +# +# IMPORTANT NOTE: +# --------------- +# +# When you connect CGI:IRC clients, there are two connect classes which +# apply to these clients. When the client initially connects, the connect +# class which matches the cgi:irc site's host is checked. Therefore you +# must raise the maximum local/global clients for this ip as high as you +# want to allow cgi clients. After the client has connected and is +# determined to be a cgi:irc client, the class which matches the client's +# real IP is then checked. You may set this class to a lower value, so that +# the real IP of the client can still be restricted to, for example, 3 +# sessions maximum. +# + + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Channel create module: Adds snomask +j, which will notify opers of +# any new channels that are created +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Channel filter module: Allows channel-op defined message # filtering using simple string matches (channel mode +g) @@ -1029,14 +1428,33 @@ # Chanprotect module: gives +q and +a channel modes # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Check module: gives /check +# Check is useful for looking up information on channels, +# users, IP addresses and hosts. +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGHOST module: Adds the /CHGHOST command # +# +#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-# +# Optional - If you want to use special chars for hostnames you can # +# specify your own custom list of chars with the tag: # +# # +# charmap - A list of chars accepted as valid by the /CHGHOST # +# and /SETHOST commands. Also note that the list is # +# case-sensitive. # +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # CHGIDENT module: Adds the /CHGIDENT command # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# CHGNAME module: Adds the /CHGNAME command +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Cloaking module: Adds usermode +x and cloaking support. # Relies on the module m_md5.so being loaded before m_cloaking.so in @@ -1049,21 +1467,58 @@ # must define cloak keys, and optionally a cloak prefix as shown # # below. When using cloaking, the cloak keys are MANDITORY and must # # be included. However, if prefix is not included, it will default # -# to your networks name from the tag. # +# to your networks name from the tag. You can also include # +# the following optional values: # +# # +# ipalways - Always cloak the IP address, not the hostname, # +# which doesn't reveal the user's ISP, but # +# results in hosts that are harder to read and # +# ban. # +# # +# lowercase - Display the cloaked hostnames in lowercase # +# characters instead of uppercase # # # -# # +# # # # # Please note that the key values will accept any number, and should # # be large numbers. Using small numbers such as "7" or "1924" will # -# seriously weaken the security of your cloak. # +# seriously weaken the security of your cloak. It is recommended you # +# use hexdecimal numbers prefixed by "0x", as shown in this example, # +# with each key eight hex digits long. # + +#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Close module: Allows an oper to close all unregistered connections. +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Conn-Lusers: Shows the LUSERS output on connect -# +# Clones module: Adds an oper command /CLONES for detecting cloned +# users. Warning: This module may be resource intensive when its +# command is issued, use with care. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Common channels module: Adds user mode +c, which, when set, requires +# that users must share a common channel with you to PRIVMSG or NOTICE +# you. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Conn-Join: Allows you to force users to join one or more channels +# automatically upon connecting to the server. +# +# +#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# +# +# If you have m_conn_join.so loaded, you can configure it using the +# follow values: +# +# #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Conn-Usermodes: Set modes on users when they connect @@ -1089,6 +1544,24 @@ # # # + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Channel cycle module. Server side /hop, with +ilk etc bypass. +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Connectban: Provides per-IP connection throttling. Any IP that disconnects +# too many times (configurable) in an hour is zlined for a (configurable) +# duration, and their count resets to 0. +# +# NOTE: This module may change name/behaviour later in 1.2. Please make sure +# you read release announcements! +# +# +# This allows for 10 quits in an hour with a 10 minute ban if that is exceeded. +# +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Connection throttle module. Configuration: # @@ -1109,6 +1582,22 @@ # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Custom title module: Adds the /TITLE command which allows for trusted +# users to gain a custom whois line and a optional +# vhost can be specified. +# +# +#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-# +# name - The username used to identify +# password - The password used to identify +# host - Allowed hostmask [optional] +# title - Title shown in whois +# vhost - Displayed host [optional] +# +# +#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # DCCALLOW module: Adds the /DCCALLOW command #<module name="m_dccallow.so"> @@ -1135,6 +1624,14 @@ # channel messages and channel notices. #<module name="m_deaf.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Delay join module: Adds the channel mode +D which delays all JOIN +# messages from users until they speak. If they quit or part before +# speaking, their quit or part message will not be shown to the channel +# which helps cut down noise on large channels in a more friendly way +# than the auditorium mode. Only channel ops may set the +D mode. +#<module name="m_delayjoin.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Deny Channels: Deny Channels from being used by users #<module name="m_denychans.so"> @@ -1144,13 +1641,23 @@ # If you have the m_denychans.so module loaded, you need to specify # # the channels to deny: # # # -# name - The channel name to deny. # +# name - The channel name to deny. (glob masks are ok) # # # # allowopers - If operators are allowed to override the deny. # # # # reason - Reason given for the deny. # # # -#<badchan name="#gods" allowopers="yes" reason="Tortoises!"> +# redirect - Redirect the user to a different channel # +# # +#<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> # +#<badchan name="#heaven" redirect="#hell" reason="Nice try!"> # +# # +# Redirects will not work if the target channel is set +L. # +# # +# Additionally, you may specify channels which are allowed, even if # +# a badchan tag specifies it would be denied: # +#<goodchan name="#godsleeps"> # +# Glob masks are accepted here also. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Devoice Module: Let users devoice themselves. @@ -1185,6 +1692,23 @@ # Foobar module: does nothing - historical relic #<module name="m_foobar.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# GeoIP module: Allows the server admin to ban users by country code. +#<module name="m_geoip.so"> +# +#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# +# # +# <geoip banunknown="false"> # +# # +# Set this value to true or yes to block unknown IP ranges which are # +# not in the database (usually LAN addresses, localhost, etc) # +# # +# <geoban country="TR" reason="This country not permitted"> # +# # +# Use one or more of these tags to ban countries by country code. # +# The country code must be in capitals and should be an ISO country # +# code such as TR, GB, or US. # + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Globops module: gives /GLOBOPS and usermode +g #<module name="m_globops.so"> @@ -1225,10 +1749,11 @@ # Optional - If you choose to use the m_hostchange.so module. # # Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module # # # -#<host suffix="polarbears.org"> +#<host suffix="polarbears.org" separator="." prefix=""> #<hostchange mask="*@fbi.gov" action="addnick"> #<hostchange mask="*r00t@*" action="suffix"> #<hostchange mask="a@b.com" action="set" value="blah.blah.blah"> +#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # httpd module: Provides http server support for InspIRCd @@ -1247,6 +1772,26 @@ # HTTP server. # +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# http ACL module: Provides access control lists for m_httpd dependent +# modules. Use this module to restrict pages by IP address and by +# password. +# +#<module name="m_httpd_acl.so"> +# +#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# +# +# Restrict access to the m_httpd_stats module to all but the local +# network and when the correct password is specified: +# +# <httpdacl path="/stats*" types="password,whitelist" +# password="mypasshere" whitelist="127.0.0.*,10.*"> +# +# Deny all connections to all but the main index page: +# +# <httpdacl path="/*" types="blacklist" blacklist="*"> +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # http stats module: Provides basic stats pages over HTTP # Requires m_httpd.so to be loaded for it to function. @@ -1267,17 +1812,33 @@ # specify the timeout for ident lookups here. If not defined, it will # # default to one second. This is a non-blocking timeout which holds # # the user in a 'connecting' state until the lookup is complete. # +# The bind value indicates which IP to bind outbound requests to. # # # -#<ident timeout="5"> +#<ident timeout="5" bind=""> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Invite except module: Adds support for channel invite exceptions (+I) #<module name="m_inviteexception.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Invisible module - Adds support for usermode +Q (quiet) which lets an +# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that +# opers are still able to see invisible users, and if an oper with +Q +# deopers, they will become visible. +# +# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you +# must first add the value canquiet="yes" to that oper's type tag. +# +#<module name="m_invisible.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Join flood module: Adds support for join flood protection (+j) #<module name="m_joinflood.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Jump Server module: Adds support for the RPL_REDIR numeric +#<module name="m_jumpserver.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J) #<module name="m_kicknorejoin.so"> @@ -1286,6 +1847,53 @@ # Knock module: adds the /KNOCK command and +K channel mode #<module name="m_knock.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# LDAP authentication module: Adds the ability to authenticate users # +# via LDAP. This is an extra module which must be enabled explicitly # +# by symlinking it from modules/extra, and requires the OpenLDAP libs # +# # +#<module name="m_ldapauth.so"> # +# # +# Configuration: # +# # +# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" # +# attribute="uid" # +# server="ldap://brainwave.brainbox.cc" # +# allowpattern="Guest*" # +# killreason="Access denied" # +# searchscope="subtree" # +# binddn="cn=Manager,dc=brainbox,dc=cc" # +# bindauth="mysecretpass" # +# verbose="yes"> # +# # +# The baserdn indicates the base DN to search in for users. Usually # +# this is 'ou=People,dc=yourdomain,dc=yourtld'. # +# # +# The attribute value indicates the attribute which is used to locate # +# a user account by name. On POSIX systems this is usually 'uid'. # +# # +# The server parameter indicates the LDAP server to connect to. The # +# ldap:// style scheme before the hostname proper is MANDITORY. # +# # +# The allowpattern value allows you to specify a wildcard mask which # +# will always be allowed to connect regardless of if they have an # +# account, for example guest users. # +# # +# Killreason indicates the QUIT reason to give to users if they fail # +# to authenticate. # +# # +# The searchscope value indicates the subtree to search under. On our # +# test system this is 'subtree'. Your mileage may vary. # +# # +# Setting the verbose value causes an oper notice to be sent out for # +# every failed authentication to the server, with an error string. # +# # +# The binddn and bindauth indicate the DN to bind to for searching, # +# and the password for the distinguished name. Some LDAP servers will # +# allow anonymous searching in which case these two values do not # +# need defining, otherwise they should be set similar to the examples # +# above. # + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is # # used to temporarily close/open for new connections to the server. # @@ -1300,6 +1908,19 @@ # Msg flood module: Adds message/notice flood protection (+f) #<module name="m_messageflood.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# MsSQL module: Allows other SQL modules to access MS SQL Server +# through a unified API. You must copy the source for this module +# from the directory src/modules/extra, plus the file m_sqlv2.h +#<module name="m_mssql.so"> +# +#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# m_mssql.so is more complex than described here, see wiki for more # +# info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module # +# +#<database name="db" username="user" password="pass" hostname="localhost" id="db1"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # MySQL module: Allows other SQL modules to access MySQL databases # through a unified API. You must copy the source for this module @@ -1319,6 +1940,17 @@ # This is supported by mIRC, x-chat, klient, and maybe more. #<module name="m_namesx.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Nickban: Implements extended ban n:, which stops anyone matching +# a mask like +b n:nick!user@host from changing their nick on channel. +#<module name="m_nickban.so"> +# + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Nickchange flood protection module: Allows up to X nick changes in Y seconds. +# Provides channel mode +F. +#<module name="m_nickflood.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Nicklock module: Let opers change a user's nick and then stop that # user from changing their nick again. @@ -1348,37 +1980,21 @@ # Oper channels mode: Adds the +O channel mode #<module name="m_operchans.so"> -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Oper hash module: Allows hashed oper passwords -# Relies on the module m_md5.so and/or m_sha256.so being loaded before -# m_oper_hash.so in the configuration file. -#<module name="m_oper_hash.so"> -# -#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# -# -# To use this module, you must define a hash type for each oper's -# password you want to hash. For example: -# -# <oper name="katsklaw" -# host="ident@dialup15.isp.com" -# hash="sha256" -# password="a41d730937a53b79f788c0ab13e9e1d5" -# type="NetAdmin"> -# -# The types of hashing available vary depending on which hashing modules -# you load, but usually if you load m_sha256.so and m_md5.so, both md5 -# and sha256 type hashing will be available (the most secure of which -# is SHA256). - #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper Join module: Forces opers to join a channel on oper-up #<module name="m_operjoin.so"> # #-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # -# If you are using the m_operjoin.so module, specify the channel here # +# If you are using the m_operjoin.so module, specify options here: # +# # +# channel - The channel name to join, can also be a comma # +# seperated list eg. "#channel1,#channel2". # # # -#<operjoin channel="#channel"> +# override - Lets the oper join walking thru any modes that # +# might be set, even bans. Use "yes" or "no". # +# # +#<operjoin channel="#channel" override="no"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper MOTD module: Provides support for seperate message of the day @@ -1409,8 +2025,39 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Oper modes module: Allows you to specify modes to add/remove on oper # Specify the modes as the 'modes' parameter of the <type> tag +# and/or as the 'modes' parameter of the <oper> tag. #<module name="m_opermodes.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Oper password hash module: Allows hashed oper passwords +# Relies on the module m_md5.so and/or m_sha256.so being loaded before +# m_password_hash.so in the configuration file. +#<module name="m_password_hash.so"> +# +#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-# +# +# To use this module, you must define a hash type for each oper's +# password you want to hash. For example: +# +# <oper name="Brain" +# host="ident@dialup15.isp.com" +# hash="sha256" +# password="a41d730937a53b79f788c0ab13e9e1d5" +# type="NetAdmin"> +# +# The types of hashing available vary depending on which hashing modules +# you load, but usually if you load m_sha256.so and m_md5.so, both md5 +# and sha256 type hashing will be available (the most secure of which +# is SHA256). + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Permanent Channels module: Channels with the permanent channels mode +# will remain open even after everyone else has left the channel, and +# therefore keep things like modes, ban lists and topic. Permanent +# channels -may- need support from your Services package to function +# properly with them. This adds channel mode +P. +#<module name="m_permchannels.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # PostgreSQL module: Allows other SQL modules to access PgSQL databases # through a unified API. You must copy the source for this module @@ -1424,6 +2071,12 @@ # #<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Quietban: Implements extended ban q:, which stops anyone matching +# a mask like +b q:nick!user@host from speaking on channel. +#<module name="m_quietban.so"> +# + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Random Quote module: provides a random quote on connect. # NOTE: Some of these may mimic fatal errors and confuse users and @@ -1441,6 +2094,11 @@ # Redirect module: Adds channel redirection (mode +L) #<module name="m_redirect.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Registered users only channel creation +# Allows only registered users and opers to create new channels. +#<module name="m_regonlycreate.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Remove module: Adds the /REMOVE command which is a peaceful # alternative to /KICK @@ -1460,10 +2118,36 @@ # Restrict message module: Allows users to only message opers #<module name="m_restrictmsg.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Ban users through regular expression patterns +#<module name="m_rline.so"> +# +#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# +# If you wish to re-check a user when they change nickname (can be +# useful under some situations, but *can* also use CPU with more users +# on a server) then set the following configuration value: +#<rline matchonnickchange="yes"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Provide /LIST throttling (to prevent flooding) and /LIST safety to # prevent excess flood when the list is large. #<module name="m_safelist.so"> +# +#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# +# +# When using Safelist, you may set the following values; +# +# The first value, 'throttle', sets the amount of time in seconds a user +# must wait between LIST commands. For example, if this is set to 60 +# (the default) then the user may not /LIST more than once a minute. +# If not defined, the default value is 60 seconds. +# +# The second value, 'maxlisters', indicates the maximum number of users +# which may be retrieving a LIST at once. It is not recommended you raise +# this value, as increasing it too high can make your network vulnerable +# to floodbots which waste your bandwidth and CPU time with LIST requests. +# +#<safelist throttle="60" maxlisters="50"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SAJOIN module: Adds the /SAJOIN command @@ -1485,10 +2169,28 @@ # SAQUIT module: Adds the oper /SAQUIT command (abusable!!!) #<module name="m_saquit.so"> -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Secure list module: Prevent /LIST in the first minute of connection, # crippling most spambots and trojan spreader bots. #<module name="m_securelist.so"> +# +#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# Securelist can be harmful to some irc search engines such as # +# netsplit.de and searchirc.com. To prevent securelist blocking these # +# sites from listing, define exception tags as shown below: # +<securehost exception="*@*.searchirc.org"> +<securehost exception="*@*.netsplit.de"> +<securehost exception="*@echo940.server4you.de"> +# # +# Define the following variable to change how long a user must wait # +# before issuing a LIST. If not defined, defaults to 60 seconds. # +# # +#<securelist waittime="60"> # + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# See nicks module: Allow for SNOMASK +N which shows nick changes. +#<module name="m_seenicks.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Set Idle module: Adds a command for opers to change their @@ -1499,17 +2201,25 @@ # Services support module: Adds several usermodes such as +R and +M # this module implements the 'identified' state via user mode +r, which # is similar to the DALnet and dreamforge systems. +# +# N O T E!! +# >> This CAN NOT be used at the same time as m_services_account << +# N O T E!! #<module name="m_services.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Services support module: Adds several usermodes such as +R and +M # this module implements the 'identified' state via account names (AC) # and is similar in operation to the way asuka and ircu handle services. -# it cannot be used at the same time as m_services, above. +# +# N O T E!! +# >> This CAN NOT be used at the same time as m_services << +# N O T E!! #<module name="m_services_account.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Sethost module: Adds the /SETHOST command +# See m_chghost for how to customise valid chars for hostnames #<module name="m_sethost.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1528,8 +2238,8 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Spy module: Adds the commands SPYLIST and SPYNAMES that let opers # see who is in a +s channel, and list +s channels, show keys of keyed -# channels the oper is not a member of etc. (standard 'abusive' features -# of many other ircds, modulized here in InspIRCd). +# channels the oper is not a member of etc. Like most standard 'abusive' +# features of many other ircds, this is modular in InspIRCd. #<module name="m_spy.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# @@ -1600,11 +2310,26 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SILENCE module: Adds support for /SILENCE #<module name="m_silence.so"> +# +# Configuration tags: +# +#<silence maxentries="32"> +# +# Sets the maximum number of entries on a users silence list. #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# -# Extended SILENCE module: Adds support for /SILENCE with additional -# features to silence based on invites, channel messages, etc. -#<module name="m_silence_ext.so"> +# SQLite3 module: Allows other SQL modules to access SQLite3 # +# databases through a unified API. You must link the source for this # +# module from the directory src/modules/extra to src/modules, plus # +# the file m_sqlv2.h # +#<module name="m_sqlite3.so"> +# +#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-# +# # +# m_sqlite.so is more complex than described here, see the wiki for # +# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module # +# +#<database hostname="/full/path/to/database.db" id="anytext"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQLutils module: Provides some utilities to SQL client modules, such @@ -1628,7 +2353,7 @@ #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SQL logging module: Allows you to log network-wide data for your -# network in a fully normalized set of SQL tables. You must copy the +# network in a fully normalised set of SQL tables. You must copy the # source for this module from the directory src/modules/extra #<module name="m_sqllog.so"> # @@ -1649,15 +2374,26 @@ #-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-# # # # dbid - Database ID to use (see m_sql) # +# hash - Hashing provider to use for password hashing # # # # See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module # # # -#<sqloper dbid="1"> +#<sqloper dbid="1" hash="md5"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be # +# added/removed by Services. # +#<module name="m_svshold.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # SWHOIS module: Allows you to add arbitary lines to user WHOIS. #<module name="m_swhois.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# Taxonomy module: Adds the /TAXONOMY command, used to view all +# metadata attached to a user. +#<module name="m_taxonomy.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Test command module: Does nothing significant. Read: pointless. #<module name="m_testcommand.so"> @@ -1671,6 +2407,15 @@ # users a /GLINE or /ZLINE etc would match. #<module name="m_tline.so"> +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# UHNAMES support module: Adds support for the IRCX style UHNAMES +# extension, which displays ident and hostname in the names list for +# each user, saving clients from doing a WHO on the channel. Note that +# this module is not widely supported yet. If a client does not support +# UHNAMES it will not enable it, this will not break incompatible +# clients. +#<module name="m_uhnames.so"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # Uninvite module: Adds the /UNINVITE command which lets users remove # pending invites from channels without waiting for the user to join. @@ -1699,6 +2444,29 @@ # Watch module: Adds the WATCH command, which is used by clients to # maintain notify lists. #<module name="m_watch.so"> +# +# Configuration tags: +# +#<watch maxentries="32"> +# +# Sets the maximum number of entries on a user's watch list. + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules) +# in a file "xline.db" which can be re-loaded on restart. This is useful +# for two reasons: it keeps bans so users may not evade them, and on +# bigger networks, server connections will take less time as there will +# be a lot less bans to apply - as most of them will already be there. +#<module name="m_xline_db.so"> + +#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# +# XMLSocket module: Adds support for connections using the shockwave +# flash XMLSocket. Note that this does not work if the client you are +# using has retarded ideas of the IRC protocol. Your client must still +# send RFC-correct lines to the server, this module only changes the +# line ending from newlines to null terminators. +# +#<module name="m_xmlsocket.so"> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # ZipLinks module: Adds support for zlib deflate on server to server @@ -1779,11 +2547,12 @@ <insane hostmasks="no" ipmasks="no" nickmasks="no" trigger="95.5"> + #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # You should already know what to do here :) # -<die value="No, i wasnt joking. You should probably edit your config *PROPERLY* and try again."> +<die value="User error. Insert new user and press any key. (you didn't edit your config properly.)"> #########################################################################