+++ /dev/null
-#!/bin/sh
-# InspIRCd Configuration Script
-#
-# Copyright 2003 The ChatSpike Development Team
-# <brain@chatspike.net>
-# <Craig@chatspike.net>
-#
-# $Id$
-#
-#
-########################################
-
-echo "Configuring default values..."
-
-ME=`pwd`
-GCCVER=`gcc -dumpversion | cut -c 1`
-GCC34=`gcc -dumpversion | cut -c 3`
-CONFIG_DIR=$ME/conf
-MODULE_DIR=$ME/modules
-BINARY_DIR=$ME/bin
-INSTALL=`which install`
-OPTIMITEMP=0
-OPTIMISATI="-g"
-MAX_CLIENT_T=`ulimit -n`
-NICK_LENGT=32
-CHAN_LENGT=64
-MAX_CHANNE=20
-MAXI_MODES=20
-HAS_STRLCPY=0
-OSNAME=`(uname -s) 2>/dev/null` || OSNAME="unknown"
-
-if [ -z $MAX_CLIENT_T ] ; then
- MAX_CLIENT_T=1024
- SCAN_FAILED=1
-fi
-
-
-if [ "$1" = "-clean" -o "$2" = "-clean" ] ; then
- `rm -rf .config.cache`
-fi
-
-if [ -e ".config.cache" -a -z "$CLEAN" ] ; then
- . .config.cache
-fi
-
-if [ "$1" = "-update" -o "$2" = "-update" ] ; then
- # They wanna update their Makefile.. good for 'em
- # Make sure .config.cache exists
- if [ ! -e ".config.cache" ] ; then
- echo "You have not run ./configure before. Please do this before trying to run the update script."
- exit 0
- fi
- # Right, load the cache values
- . .config.cache
- # Check for modules
-
- case "$OSNAME" in
- FreeBSD)
- LDLIBS="-Ldl"
- FLAGS="-fPIC -frtti $OPTIMISATI -Wcomment -Wformat -Wunused -Wshadow -Werror -Wswitch -Wchar-subscripts -Wparentheses -Woverloaded-virtual"
- MAKEPROG="gmake"
- ;;
- *)
- LDLIBS="-ldl"
- FLAGS="-fPIC -frtti $OPTIMISATI -Wcomment -Wformat -Wunused -Wshadow -Werror -Wswitch -Wchar-subscripts -Wparentheses -Woverloaded-virtual"
- MAKEPROG="make"
- ;;
- esac
-
- MODULES=""
- for module in src/modules/*.cpp ; do
- mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
- MODULES="$MODULES $mod"
- done
-
- # Write the new makefile.
- for file in Makefile; do
- echo -e "\033[0mWriting \033[1;32m$file\033[0m"
- rm -f $file
- sed -e "
- s%@MAKEPROG@%$MAKEPROG%g
- s%@FLAGS@%$FLAGS%g
- s%@LDLIBS@%$LDLIBS%g
- s%@CONFIG_DIR@%$CONFIG_DIR%g
- s%@MODULE_DIR@%$MODULE_DIR%g
- s%@BINARY_DIR@%$BINARY_DIR%g
- s%@MODULES@%$MODULES%g
- " .${file}.inc >> $file
- done
- echo -e "\033[0mWriting \033[1;32msrc/modules/Makefile\033[0m"
- rm -f src/modules/Makefile
-
- # Generate the Header..
-
- echo "# (C) ChatSpike development team" >> src/modules/Makefile
- echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
- echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
- echo "# for assisting with making this work right." >> src/modules/Makefile
- echo "#" >> src/modules/Makefile
- echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
- echo "# please run ./configure --update" >> src/modules/Makefile
- echo "" >> src/modules/Makefile
- echo "all: \$(MODULES)" >> src/modules/Makefile
- echo "" >> src/modules/Makefile
-
-
- for module in src/modules/*.cpp ; do
- flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
- mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
- mod2=`echo $module | sed 's/src\/modules\///'`
- echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile
- echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
- echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile
- echo "" >> src/modules/Makefile
- done
-
-
- echo "Complete."
- exit 1;
-fi
-
-
-if [ -z $MAX_CLIENT ] ; then
- MAX_CLIENT=$MAX_CLIENT_T
-fi
-
-
-c=""
-n=""
-if [ "`eval echo -e -n 'a'`" = "-n a" ] ; then
- c="\c"
-else
- n="-n"
-fi
-
-exists () { # because some shells don't have test -e
- if [ -f $1 -o -d $1 -o -p $1 -o -c $1 -o -b $1 ] ; then
- return 0
- else
- return 1
- fi
-}
-
-echo "#include <string.h>">.test.cpp
-echo "#include <stdio.h>">>.test.cpp
-echo "int main() { char a[10]; char b[10]; strlcpy(a,b,10); printf(\"%d\\n\",9); }" >>.test.cpp
-g++ -o .test .test.cpp 2>&1
-if [ -e ".test" ] ; then
- HAS_STRLCPY=1
-fi
-rm -f .test.cpp .test
-
-clear
-echo -e "'\033[1;33m####\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::'\033[1;33m####\033[0m:'\033[1;33m########\033[0m:::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::"
-echo -e ". \033[1;33m##\033[0m:: \033[1;33m###\033[0m:: \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:. \033[1;33m##\033[0m:: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:"
-echo -e ": \033[1;33m##\033[0m:: \033[1;33m####\033[0m: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
-echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m \033[1;33m##\033[0m \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::: \033[1;33m##\033[0m:: \033[1;33m########\033[0m:: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
-echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m. \033[1;33m####\033[0m::..... \033[1;33m##\033[0m: \033[1;33m##\033[0m.....:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m.. \033[1;33m##\033[0m::: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
-echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m:. \033[1;33m###\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m::::::::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:: \033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
-echo -e "'\033[1;33m####\033[0m: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m##\033[0m::::::::'\033[1;33m####\033[0m: \033[1;33m##\033[0m:::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::"
-echo -e "\033[0m\033[0m....::..::::..:::......:::..:::::::::....::..:::::..:::......:::........:::"
-echo ""
-echo "Welcome to the InspIRCd Configuration program!"
-echo ""
-echo "*** If you are unsure of any of these values, leave it blank for ***"
-echo "*** standard settings that will work, and your server will run ***"
-echo "*** using them. If you are running this server as part of a ***"
-echo "*** larger network, you must consult with your network admins ***"
-echo "*** for the proper values to use, or server links will be unstable! ***"
-echo ""
-echo -e "Press \033[1m<RETURN>\033[0m to accept the default for any option, or enter"
-echo -e "a new value. Please note: You will \033[1mHAVE\033[0m to read the docs"
-echo -e "dir, otherwise you won't have a config file!"
-echo ""
-echo -e "Your operating system is: \033[1;32m$OSNAME\033[0m (`uname -mnr`), fdmax: $MAX_CLIENT_T"
-echo ""
-
-#############################################################################
-
- ok=0
- asked=1
- echo "In what directory are the configuration files?"
- while [ $ok -eq 0 ] ; do
- echo -e $n "[\033[1;32m$CONFIG_DIR\033[0m] -> $c"
- if read INPUT ; then : ; else echo "" ; exit 1 ; fi
- if [ ! "$INPUT" ] ; then
- INPUT=$CONFIG_DIR
- default=1
- fi
- if echo "$INPUT" | grep -q \[\'\"\\\] ; then
- echo 'Please use a pathname without the characters: '\'' " \'
- elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
- if exists "$INPUT" ; then
- echo "$INPUT exists, but is not a directory!"
- else
- echo "$INPUT does not exist. Create it?"
- echo -e $n "[\033[1;32my\033[0m] $c"
- read YN
- if [ "$YN" != "n" ] ; then
- if mkdir -p "$INPUT" ; then
- ok=1
- fi
- fi
- fi
- else
- ok=1
- fi
- done
- CONFIG_DIR=$INPUT
- echo ""
-
-
-##############################################################################
-
- ok=0
- asked=1
- echo "In What directory are the modules to be compiled to?"
- while [ $ok -eq 0 ] ; do
- echo -e $n "[\033[1;32m$MODULE_DIR\033[0m] -> $c"
- if read INPUT ; then : ; else echo "" ; exit 1 ; fi
- if [ ! "$INPUT" ] ; then
- INPUT=$MODULE_DIR
- default=1
- fi
- if echo "$INPUT" | grep -q \[\'\"\\\] ; then
- echo 'Please use a pathname without the characters: '\'' " \'
- elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
- if exists "$INPUT" ; then
- echo "$INPUT exists, but is not a directory!"
- else
- echo "$INPUT does not exist. Create it?"
- echo -e $n "[\033[1;32my\033[0m] $c"
- read YN
- if [ "$YN" != "n" ] ; then
- if mkdir -p "$INPUT" ; then
- ok=1
- fi
- fi
- fi
- else
- ok=1
- fi
- done
- MODULE_DIR=$INPUT
- echo ""
-
-
-##############################################################################
-
- ok=0
- asked=1
- echo "In what directory is the IRCd binary to be placed?"
- while [ $ok -eq 0 ] ; do
- echo -e $n "[\033[1;32m$BINARY_DIR\033[0m] -> $c"
- if read INPUT ; then : ; else echo "" ; exit 1 ; fi
- if [ ! "$INPUT" ] ; then
- INPUT=$BINARY_DIR
- default=1
- fi
- if echo "$INPUT" | grep -q \[\'\"\\\] ; then
- echo 'Please use a pathname without the characters: '\'' " \'
- elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
- if exists "$INPUT" ; then
- echo "$INPUT exists, but is not a directory!"
- else
- echo "$INPUT does not exist. Create it?"
- echo -e $n "[\033[1;32my\033[0m] $c"
- read YN
- if [ "$YN" != "n" ] ; then
- if mkdir -p "$INPUT" ; then
- ok=1
- fi
- fi
- fi
- else
- ok=1
- fi
- done
- BINARY_DIR=$INPUT
- echo ""
-
-###############################################################################
-# Craigs Version 3 With slightly less Cheeze :p
-
-cheeze=0
-echo -e "Maximum number of clients at any one time (\033[1;32m1-$MAX_CLIENT_T\033[0m)?"
-while [ "$cheeze" -eq "0" ] ; do
- echo -e $n "[\033[1;32m$MAX_CLIENT\033[0m] -> $c"
- read cc
-
- if [ -z "$cc" ] ; then
- cc=$MAX_CLIENT
- fi
-
- case "$cc" in
- [0-9]*)
- if [ "$cc" -gt "$MAX_CLIENT_T" -a -z "$SCAN_FAILED" ] ; then
- echo -e "WARNING: Our scans have indicated that you are attempting"
- echo -e "to use more sockets than there are avaliable. Are you sure"
- echo -e "you wish to do this? It may cause the IRCd to malfunction [y/n]"
- echo -e $n "[\033[1;32mn\033[0m] -> $c"
- read YN
- if [ "$YN" = "y" ] ; then
- MAX_CLIENT=$cc
- cheeze=1
- else
- echo ""
- echo -e "Please enter the correct value (\033[1;32m1-$MAX_CLIENT_T\033[0m)"
- fi
- else
- echo $SCAN_FAILED
- cheeze=1
- MAX_CLIENT=$cc
- fi
- ;;
- *)
- echo ""
- echo "You must enter a number in this field. Please try again."
- ;;
- esac
-done
-echo ""
-
-
-###############################################################################
-
- cheeze=0
- echo -e "What is the Maximum length of nicknames?"
- while [ "$cheeze" -eq "0" ] ; do
- echo -e $n "[\033[1;32m$NICK_LENGT\033[0m] -> $c"
- read cc
- if [ "$cc" ] ; then
- case "$cc" in
- [0-9]*)
- NICK_LENGT=$cc
- cheeze=1
- ;;
- *)
- echo ""
- echo "You Must Enter a Number in this field. Please Try Again."
- cheeze=0
- ;;
- esac
- else
- cheeze=1
- fi
- done
- echo ""
-
-###############################################################################
-
- cheeze=0
- echo -e "What is the Maximum length of channel names?"
- while [ "$cheeze" -eq "0" ] ; do
- echo -e $n "[\033[1;32m$MAX_CHANNE\033[0m] -> $c"
- read cc
- if [ "$cc" ] ; then
- case "$cc" in
- [0-9]*)
- MAX_CHANNE=$cc
- cheeze=1
- ;;
- *)
- echo ""
- echo "You Must Enter a Number in this field. Please Try Again."
- cheeze=0
- ;;
- esac
- else
- cheeze=1
- fi
- done
- echo ""
-
-###############################################################################
-
- cheeze=0
- echo -e "What is the Maximum number of mode changes in one line?"
- while [ "$cheeze" -eq "0" ] ; do
- echo -e $n "[\033[1;32m$MAXI_MODES\033[0m] -> $c"
- read cc
- if [ "$cc" ] ; then
- case "$cc" in
- [0-9]*)
- MAXI_MODES=$cc
- cheeze=1
- ;;
- *)
- echo ""
- echo "You Must Enter a Number in this field. Please Try Again."
- cheeze=0
- ;;
- esac
- else
- cheeze=1
- fi
- done
- echo ""
-
-###############################################################################
-# Code Optimisation?
-
- cheeze=0
- echo -e "Enter the Level Of Binary optimisation. This is a number between 0 and 3 (inclusive)"
- echo -e "The InspIRCd Team will _NOT_ support any bug reports above 0."
- echo -e "Also note, the IRCd behaviour will be different depending on this value."
- echo -e "Please read the documentation for more information."
- echo -e ""
- echo -e "The Higher the number, the more optimised your binary will be. This value will default to 0"
- echo -e "If you either a) Dont enter a number, or b) Enter a value outside the range."
- echo -e $n "[\033[1;32m$OPTIMITEMP\033[0m] -> $c"
- read cc
- if [ -z "$cc" ] ; then
- cc=$OPTIMITEMP
- fi
- case "$cc" in
- 1)
- OPTIMITEMP=1
- OPTIMISATI="-O"
- ;;
- 2)
- OPTIMITEMP=2
- OPTIMISATI="-O2"
- ;;
- 3)
- OPTIMITEMP=3
- OPTIMISATI="-O3"
- ;;
- *)
- OPTIMITEMP=0
- OPTIMISATI="-g"
- ;;
- esac
- echo ""
-
-###############################################################################
-
-
-echo -e "\033[1;32mPre-build configuration is complete!\033[0m"
-echo ""
-echo -e "\033[0mConfig path:\033[1;32m\t\t\t$CONFIG_DIR"
-echo -e "\033[0mModule path:\033[1;32m\t\t\t$MODULE_DIR"
-echo -e "\033[0mMax connections:\033[1;32m\t\t$MAX_CLIENT"
-echo -e "\033[0mMax User Channels\033[1;32m\t\t$MAX_CHANNE"
-echo -e "\033[0mMax nickname length:\033[1;32m\t\t$NICK_LENGT"
-echo -e "\033[0mMax channel length:\033[1;32m\t\t$CHAN_LENGT"
-echo -e "\033[0mMax mode length:\033[1;32m\t\t$MAXI_MODES"
-echo -e "\033[0mGCC Version Found:\033[1;32m\t\t$GCCVER.$GCC34"
-echo -e "\033[0mOptimatizaton Flag:\033[1;32m\t\t$OPTIMISATI"
-echo -e "\033[0m"
-
-echo "Writing cache file for future ./configures ..."
-
-COPY_CONF=0
-if [ "$CONFIG_DIR" != "$ME/conf" ] ; then
- COPY_CONF=1
-fi
-
-
-if [ -e ".config.cache" ] ; then
- rm .config.cache
-fi
-echo "CONFIG_DIR=\"$CONFIG_DIR\"" >> .config.cache
-echo "MODULE_DIR=\"$MODULE_DIR\"" >> .config.cache
-echo "BINARY_DIR=\"$BINARY_DIR\"" >> .config.cache
-echo "MAX_CLIENT=\"$MAX_CLIENT\"" >> .config.cache
-echo "MAX_CHANNE=\"$MAX_CHANNE\"" >> .config.cache
-echo "NICK_LENGT=\"$NICK_LENGT\"" >> .config.cache
-echo "MAXI_MODES=\"$MAXI_MODES\"" >> .config.cache
-echo "OPTIMITEMP=\"$OPTIMITEMP\"" >> .config.cache
-echo "OPTIMISATI=\"$OPTIMISATI\"" >> .config.cache
-echo "GCC34=\"$GCC34\"" >> .config.cache
-echo "HAS_STRLCPY=\"$HAS_STRLCPY\"" >> .config.cache
-echo "COPY_CONF=\"$COPY_CONF\"" >> .config.cache
-
-echo -e "Writing \033[1;32minspircd_config.h"
-
-echo "/* Auto generated by configure, do not modify! */" >include/inspircd_config.h
-echo "" >>include/inspircd_config.h
-if [ "$GCCVER" -eq "3" ] ; then
-echo "#define GCC3" >>include/inspircd_config.h
- if [ "$GCC34" -gt "3" ] ; then
- echo "#define GCC34" >>include/inspircd_config.h
- fi
-fi
-if [ "$HAS_STRLCPY" -eq "1" ] ; then
- echo "#define HAS_STRLCPY" >>include/inspircd_config.h
-fi
-echo "#define SYSLOG_FACILITY LOG_DAEMON" >>include/inspircd_config.h
-echo "#define SYSLOG_LEVEL LOG_NOTICE" >>include/inspircd_config.h
-echo "#define CONFIG_FILE \"$CONFIG_DIR/inspircd.conf\"" >>include/inspircd_config.h
-echo "#define MOD_PATH \"$MODULE_DIR\"" >>include/inspircd_config.h
-echo "#define VERSION \"`sh ./src/version.sh`\"" >>include/inspircd_config.h
-echo "#define MAXCLIENTS $MAX_CLIENT" >>include/inspircd_config.h
-echo "#define NICKMAX $NICK_LENGT" >>include/inspircd_config.h
-echo "#define CHANMAX $CHAN_LENGT" >>include/inspircd_config.h
-echo "#define MAXCHANS $MAX_CHANNE" >>include/inspircd_config.h
-echo "#define MAXMODES $MAXI_MODES" >>include/inspircd_config.h
-echo "#define OPTIMISATION $OPTIMITEMP" >>include/inspircd_config.h
-echo "#define SYSTEM \"`uname -n -s -r`\"" >>include/inspircd_config.h
-echo "#define MAXBUF 514">>include/inspircd_config.h
-touch include/inspircd_config.h
-
-case "$OSNAME" in
- FreeBSD)
- LDLIBS="-Ldl"
- FLAGS="-fPIC -frtti $OPTIMISATI"
- MAKEPROG="gmake"
- ;;
- *)
- LDLIBS="-ldl"
- FLAGS="-fPIC -frtti $OPTIMISATI"
- MAKEPROG="make"
- ;;
-esac
-
-MODULES=""
-for module in src/modules/*.cpp ; do
- mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
- MODULES="$MODULES $mod"
-done
-
-for file in Makefile inspircd; do
- echo -e "\033[0mWriting \033[1;32m$file\033[0m"
- rm -f $file
- sed -e "
- s%@MAKEPROG@%$MAKEPROG%g
- s%@FLAGS@%$FLAGS%g
- s%@LDLIBS@%$LDLIBS%g
- s%@CONFIG_DIR@%$CONFIG_DIR%g
- s%@MODULE_DIR@%$MODULE_DIR%g
- s%@BINARY_DIR@%$BINARY_DIR%g
- s%@MODULES@%$MODULES%g
- " .${file}.inc >> $file
-done
-`chmod 700 inspircd`
-
-echo -e "\033[0mWriting \033[1;32msrc/modules/Makefile\033[0m"
-rm -f src/modules/Makefile
-
-# Generate the Header..
-
-echo "# (C) ChatSpike development team" >> src/modules/Makefile
-echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
-echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
-echo "# for assisting with making this work right." >> src/modules/Makefile
-echo "#" >> src/modules/Makefile
-echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
-echo "# please run ./configure --update" >> src/modules/Makefile
-echo "" >> src/modules/Makefile
-echo "all: \$(MODULES)" >> src/modules/Makefile
-echo "" >> src/modules/Makefile
-
-for module in src/modules/*.cpp ; do
- flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
- mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
- mod2=`echo $module | sed 's/src\/modules\///'`
- echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile
- echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
- echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile
- echo "" >> src/modules/Makefile
-done
-
-
-echo ""
-
-echo ""
-echo "Do you want to compile the IRCd binaries?"
-echo -e $n "[\033[1;32my\033[0m] $c"
-read YN
-if [ "$YN" != "n" ] ; then
- echo ""
- echo -e "\033[1;32mCompiling...\033[0m"
- echo ""
- cd $ME
- $MAKEPROG
- echo ""
- echo "Done!"
-else
- echo ""
- echo -e "To build your server with these settings, please type '\033[1;32m$MAKEPROG\033[0m' now."
-fi
-
-
-echo ""
-echo -e "*** \033[1;32mRemember to edit your configuration files!!!\033[0m ***"
-echo ""
projects / user / henk / code / inspircd.git / commitdiff