--- /dev/null
+########################################################################
+# #
+# ___ ___ ____ ____ _ #
+# |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
+# | || '_ \/ __| '_ \| || |_) | | / _` | #
+# | || | | \__ \ |_) | || _ <| |__| (_| | #
+# |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
+# |_| #
+# ____ __ _ _ _ #
+# / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
+# | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
+# | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
+# \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
+# |___/ #
+# #
+##################################||####################################
+ #||#
+##################################||####################################
+# #
+# This is an example of the config file for InspIRCd. #
+# Change the options to suit your network. #
+# #
+# This is a test.conf with semi-sane defaults if you just want #
+# to get a network up and running as quickly as possible or if #
+# you want a quick testnet for something. #
+# It is not extremely secure, but we *STRONGLY* recommend #
+# using inspircd.conf.example and all the other sub-confs #
+# instead. #
+# #
+# This .conf in it's current form is not supported. #
+# Please do not ask for help if something isn't working #
+# as you expected. #
+# For a supported .conf, please use inspircd.conf.example #
+# #
+# $Id: inspircd.conf.example 10648 2008-10-16 18:07:27Z brain $
+# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
+# lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
+# if you've configured InspIRCd before, these probably indicate #
+# something new or different to this version and you SHOULD READ IT. #
+# #
+########################################################################
+# #
+# Unalphabeticalise the modules list at your own risk #
+# #
+########################################################################
+
+#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This optional tag allows you to include another config file #
+# allowing you to keep your configuration tidy. The configuration #
+# file you include will be treated as part of the configuration file #
+# which includes it, in simple terms the inclusion is transparent. #
+# #
+# All paths to config files are relative to the directory of the main #
+# config file inspircd.conf, unless the filename starts with a forward#
+# slash (/) in which case it is treated as an absolute path. #
+# #
+# You may also include an executable file, in which case if you do so #
+# the output of the executable on the standard output will be added #
+# to your config at the point of the include tag. #
+# #
+# Syntax is as follows: #
+#<include file="file.conf"> #
+#<include executable="/path/to/executable parameters"> #
+# #
+# Executable Include Example: #
+#<include executable="/usr/bin/wget -O - http://mynet.net/inspircd.conf">
+# #
+
+
+#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
+# #
+# Here is where you enter the information about your server. #
+# #
+
+<server
+ # name: Hostname of your server. Does not need to be valid.
+ name="test.yournet.net"
+
+ # description: Server description. Spaces are allowed.
+ description="Test IRC Server"
+
+ # network: Network name given on connect to clients.
+ # Should be the same on all servers on the network and
+ # not contain spaces.
+ network="TestNet">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Describes the Server Administrator's real name (optionally), #
+# nick, and email address. #
+# #
+
+<admin
+ # name: Real Name
+ name="NetAdmin"
+
+ # nick: Nickname (preferably what you use on the network)
+ nick="NetAdmin"
+
+ # email: email address. Does not have to be valid
+ # but should be for the users to be able to contact you.
+ email="admin@localhost">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
+# #
+# Enter the port and address bindings here. #
+# #
+# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# If you want to link servers to InspIRCd you must load the #
+# m_spanningtree.so module! Please see the modules list below for #
+# information on how to load this module! If you do not load this #
+# module, server ports will NOT be bound! #
+# #
+# PLEASE NOTE: If you have build InspIRCd with IPv6 support, you MUST #
+# specify a bind address if you want the IRCd to bind to a IPv4 IP. #
+
+#<bind
+ # address: IP address to bind to if the box that you are hosting
+ # on has more than one IP, else the ircd will try to bind to all
+ # IP's on the box if this is not defined
+ #address=""
+
+ # port: Port for users and/or servers to be able to connect to.
+ # you can select multiple ports by separating them
+ # with a - character like the example below.
+ #port="6697"
+
+ # type: Type of bind block this is. It can either be clients or
+ # servers. Whichever you select will be the only type able to connect
+ # to this bind section.
+ #type="clients"
+
+ # ssl: If you want this bind section to use SSL, define either
+ # gnutls or openssl here. The appropriate SSL modules must be loaded
+ # for ssl to work. If you do not want this bind section to support ssl,
+ # just remove this option.
+ #ssl="gnutls">
+
+<bind address="" port="6660-6669" type="clients">
+
+# When linking servers, the openssl and gnutls transports are largely
+# link-compatible and can be used alongside each other or either/or
+# on each end of the link without any significant issues.
+# Transports can only be used on server blocks.
+# Supported Transports are: "zip", "openssl" and "gnutls".
+# You must load m_ziplinks module for zip, m_ssl_openssl for openssl
+# or m_ssl_gnutls for gnutls.
+
+#<bind address="" port="7000,7001" type="servers">
+#<bind address="1.2.3.4" port="7005" type="servers" transport="openssl">
+
+
+#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
+# #
+# You can configure the passwords here which you wish to use for #
+# the die and restart commands. Only trusted IRCop's who will #
+# need this ability should know the die and restart password. #
+# #
+
+<power
+
+ # diepass: Password for opers to use if they need to shutdown (die)
+ # a server.
+ diepass="z0mg-die"
+
+ # restartpass: Password for opers to use if they need to restart
+ # a server.
+ restartpass="restart-n0w">
+
+
+#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# This is where you can configure which connections are allowed #
+# and denied access onto your server. The password is optional. #
+# You may have as many of these as you require. To allow/deny all #
+# connections, use a '*' or 0.0.0.0/0. #
+# #
+
+<connect
+ # allow: What IP addresses/hosts to allow for this block.
+ allow="*"
+
+ # maxchans: Maximum number of channels a user in this class
+ # be in at one time. This overrides every other maxchans setting.
+ #maxchans="30"
+
+ # timeout: How long (in seconds) the server will wait before
+ # disconnecting a user if they do not do anything on connect.
+ # (Note, this is a client-side thing, if the client does not
+ # send /nick, /user or /pass)
+ timeout="60"
+
+ # flood: After x lines (flood) in x seconds (see threshold)
+ # the user is disconnected for flooding.
+ flood="20"
+
+ # threshold: In how many seconds can a user flood x lines (see flood)
+ # before they are disconnected for excess flood.
+ threshold="1"
+
+ # pingfreq: How often the server tries to ping connecting clients/servers.
+ pingfreq="120"
+
+ # sendq: Amount of data that the server is allowed to send to the user
+ # before they are dropped.
+ sendq="262144"
+
+ # recvq: amount of data allowed in a clients queue before they are dropped.
+ recvq="8192"
+
+ # localmax: Maximum local connections per IP.
+ localmax="3"
+
+ # globalmax: Maximum global (network-wide) connections per IP.
+ globalmax="3"
+
+ # limit: How many users are allowed in this class
+ limit="5000"
+
+ # modes: Usermodes that are set on users in this block on connect.
+ # Enabling this option requires that the m_conn_umodes module be loaded.
+ # This entry is highly recommended to use for/with IP Cloaking/masking.
+ modes="+x">
+
+<connect
+ # deny: Will not let people connect if they have specified host/IP.
+ deny="69.254.*">
+<connect deny="3ffe::0/32">
+
+#-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
+# #
+# CIDR configuration allows detection of clones and applying of #
+# throttle limits across a CIDR range. (A CIDR range is a group of #
+# IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be #
+# represented as 192.168.1.0/24). This means that abuse across an ISP #
+# is detected and curtailed much easier. #
+# #
+
+<cidr
+ # ipv4clone: specifies how many bits of an IP address should be
+ # looked at for clones. The default only looks for clones on a
+ # single IP address of a user. You do not want to set this
+ # extremely low. (Values are 0-32).
+ ipv4clone="32"
+
+ # ipv6clone: specifies how many bits of an IP address should be
+ # looked at for clones. The default only looks for clones on a
+ # single IP address of a user. You do not want to set this
+ # extremely low. (Values are 0-128).
+ ipv6clone="128">
+
+#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
+# #
+# Classes are a group of commands which are grouped together and #
+# given a unique name. They're used to define which commands #
+# are available to certain types of Operators. #
+# #
+# #
+# Note: It is possible to make a class which covers all available #
+# commands. To do this, specify commands="*". This is not really #
+# recommended, as it negates the whole purpose of the class system, #
+# however it is provided for fast configuration (e.g. in test nets) #
+# #
+
+<class
+ name="Shutdown"
+
+ # commands: oper commands that users of this class can run.
+ commands="DIE RESTART REHASH LOADMODULE UNLOADMODULE RELOAD"
+
+ # usermodes: Oper-only usermodes that opers with this class can use.
+ usermodes="*"
+
+ # chanmodes: Oper-only channel modes that opers with this class can use.
+ chanmodes="*">
+
+<class name="ServerLink" commands="CONNECT SQUIT RCONNECT MKPASSWD MKSHA256 ALLTIME SAJOIN SAMODE SANICK SAPART SAQUIT" usermodes="*" chanmodes="*">
+<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE TBAN TLINE USERIPCBAN CHECK CLOSE CLONES GLOBOPS JUMPSERVER SHUN LOCKSERV UNLOCKSERV NICKLOCK NICKUNLOCK" usermodes="*" chanmodes="*">
+<class name="OperChat" commands="WALLOPS GLOBOPS SETIDLE SPYLIST SPYNAMES TRACE TAXONOMY" usermodes="*" chanmodes="*">
+<class name="HostCloak" commands="SETHOST SETIDENT SETNAME CHGHOST CHGIDENT CHGNAME SETIDLE SWHOIS" usermodes="*" chanmodes="*">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# This is where you specify which types of operators you have on #
+# your server, as well as the commands they are allowed to use. #
+# This works alongside with the classes specified above. #
+# #
+
+<type
+ # name: Name of type. Used in actual olines below.
+ # Cannot contain spaces. If you would like a space, use
+ # the _ character instead and it will translate to a space on whois.
+ name="NetAdmin"
+
+ # classes: classes (above blocks) that this type belongs to.
+ classes="OperChat BanControl HostCloak Shutdown ServerLink"
+
+ # host: host oper gets on oper-up. This is optional.
+ host="netadmin.yournet.net"
+
+ # modes: usermodes besides +o that are set on a oper of this type
+ # when they oper up. Used for snomasks and other things.
+ # Requires that m_opermodes.so be loaded.
+ modes="+s +cCqQ"
+ override="*">
+
+<type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za">
+<type name="Helper" classes="HostCloak" host="helper.omega.org.za">
+
+
+#-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Opers are defined here. This is a very important section. #
+# Remember to only make operators out of trust worthy people. #
+# #
+
+# oline with plain-text password
+<oper
+ # name: oper login that is used to oper up (/oper name password).
+ # Remember: This is case sensitive
+ name="admin"
+
+ # password: case-sensitive, unhashed...yea...self-explanatory.
+ password="s3cret"
+
+ # host: What hostnames/IP's are allowed to oper up with this oline.
+ # Multiple options can be separated by spaces and CIDR's are allowed.
+ host="*@*"
+
+ # ** ADVANCED ** This option is disabled by default.
+ # fingerprint: When using the m_oper_ssl_cert module, you may specify
+ # a key fingerprint here. This can be obtained by using the
+ # /fingerprint command while the module is loaded. This enhances
+ # security by verifying that the person opering up has the matching
+ # key/certificate combination. This enhances security a great deal.
+ # If m_oper_ssl and/or m_ssl_gnutls/m_ssl_openssl aren't loaded,
+ # this option will be ignored.
+ #fingerprint="67:CB:9D:C0:13:24:8A:82:9B:B2:17:1E:D1:1B:EC:D4"
+
+ # type: What oper type this oline is. See the block above for list
+ # of types. NOTE: This is case-sensitive as well.
+ type="NetAdmin">
+
+# oline with hashed password. It is highly recommended to use hashed passwords.
+#<oper
+ # name: oper login that is used to oper up (/oper name password).
+ # Remember: This is case sensitive
+ #name="Brain"
+
+ # hash: what hash this password is hashed with. requires the module
+ # for selected hash (m_md5.so, m_sha256.so or m_ripemd160) be
+ # loaded and the oper password hashing module (m_password_hash.so)
+ # loaded. Options here are: "md5", "sha256" and "ripemd160".
+ #hash="sha256"
+
+ # password: a hash of your password (see above option) hashed
+ # with /mkpasswd *hash* *password* . See m_password_hash in modules.conf
+ # for more information about password hashing.
+ #password="1ec1c26b50d5d3c58d9583181af8076655fe00756bf7285940ba3670f99fcba0"
+
+ # host: What hostnames/IP's are allowed to oper up with this oline.
+ # Multiple options can be separated by spaces and CIDR's are allowed.
+ #host="ident@dialup15.isp.com *@localhost *@server.com *@3ffe::0/16"
+
+ # type: What oper type this oline is. See the block above for list
+ # of types. NOTE: This is case-sensitive as well.
+ #type="NetAdmin">
+
+
+#-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# #
+# Defines which servers can link to this one, and which servers this #
+# server may create outbound links to. #
+# #
+# If you would like more detailed options, but a slightly more #
+# painful configuration, please see inspircd.conf.example.old #
+# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# If you want to link servers to InspIRCd you must load the #
+# m_spanningtree.so module! Please see the modules list below for #
+# information on how to load this module! If you do not load this #
+# module, server links will NOT work! #
+# #
+# Also, if you define any transports, you must load the modules for #
+# these transports BEFORE you load m_spanningtree, e.g. place them #
+# above it in the configuration file. Currently this means the three #
+# modules m_ssl_gnutls, m_ziplinks and m_ssl_openssl, depending on #
+# which you choose to use. #
+# #
+
+#<link name="hub.penguin.org"
+
+ # ipaddr: The IP address of the remote server.
+ # Can also be a hostname, but hostname must resolve.
+ #ipaddr="penguin.box.com"
+
+ # port: the port to connect to this server on
+ #port="7000"
+
+ # allowmask: Range of IP addresses to allow for this link.
+ # Can be a CIDR (see example).
+ #allowmask="69.58.44.0/24"
+
+ # autoconnect: Time to wait to attempt to autoconnect
+ # to remote server (in seconds).
+ #autoconnect="300"
+
+ # failover: If defined, if this link fails,
+ # what is the next link that is tried.
+ #failover="hub.other.net"
+
+ # timeout: If defined, this option defines how long the server
+ # will wait to consider the connect attempt failed and try the
+ # failover (see above).
+ #timeout="15"
+
+ # transport: If defined, this states extra modules that can be
+ # used in the connection. Options are: "openssl" and "gnutls"
+ # for encryption (they are compatible with each other) and
+ # "zip" for compression. You must use the same (or a compa-
+ # tible) transport on both sides of the link.
+ #transport="gnutls"
+
+ # bind: Local IP address to bind to.
+ #bind="1.2.3.4"
+
+ # statshidden: defines if IP is shown to opers when
+ # /stats c is invoked.
+ #statshidden="no"
+
+ # hidden: If this is set to yes, this server and it's "child"
+ # servers will not be shown when users do a /map or /links
+ #hidden="no"
+
+ # passwords: the passwords we send and recieve.
+ # The remote server will have these passwords reversed.
+ #sendpass="outgoing!password"
+ #recvpass="incoming!password">
+
+# A duplicate of the first link block without comments
+# if you like copying & pasting.
+#<link name="hub.penguin.org"
+ #ipaddr="penguin.box.com"
+ #port="7000"
+ #allowmask="69.58.44.0/24"
+ #autoconnect="300"
+ #failover="hub.other.net"
+ #timeout="15"
+ #transport="gnutls"
+ #bind="1.2.3.4"
+ #statshidden="no"
+ #hidden="no"
+ #sendpass="outgoing!password"
+ #recvpass="incoming!password">
+
+# Link block for services. Options are the same as for the first
+# link block (depending on what your services package supports).
+#<link name="services.antarctic.com"
+ #ipaddr="localhost"
+ #port="7000"
+ #allowmask="127.0.0.0/8"
+ #sendpass="penguins"
+ #recvpass="polarbears">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#- ULINES CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+# This tag defines a ulined server. A U-Lined server has special #
+# permissions, and should be used with caution. Services servers are #
+# usually u-lined in this manner. #
+# #
+# The 'silent' value, if set to yes, indicates that this server should#
+# not generate quit and connect notices, which can cut down on noise #
+# to opers on the network. #
+# #
+#<uline server="services.antarctic.com" silent="yes">
+
+#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# #
+
+<files
+ # motd: Path to your motd file. Path is relative to the conf directory.
+ motd="inspircd.motd.example"
+
+ # rules: Path to your rules file. Path is relative to the conf directory.
+ rules="inspircd.rules.example">
+
+#-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+
+<channels
+ # users: Maximum number of channels a user can be in at once.
+ users="20"
+
+ # opers: Maximum number of channels a oper can be in at once.
+ opers="60">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# If these values are not defined, InspIRCd uses the default DNS resolver
+# of your system.
+
+#<dns
+ # server: DNS server to use to attempt to resolve IP's to hostnames.
+ #server="127.0.0.1"
+
+ # timeout: seconds to wait to try to resolve DNS/hostname.
+ #timeout="5">
+
+# An example of using an IPv6 nameserver
+#<dns server="::1" timeout="5">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Define the path to the PID file here. The PID file can be used to #
+# rehash the ircd from the shell or to terminate the ircd from the #
+# shell using shell scripts, perl scripts, etc... and to monitor the #
+# ircd's state via cron jobs. If this is a relative path, it will be #
+# relative to the configuration directory, and if it is not defined, #
+# the default of 'inspircd.pid' is used. #
+# #
+
+#<pid file="/path/to/inspircd.pid">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Use these tags to customise the ban limits on a per channel basis. #
+# The tags are read from top to bottom, and any tag found which #
+# matches the channels name applies the banlimit to that channel. #
+# It is advisable to put an entry with the channel as '*' at the #
+# bottom of the list. If none are specified or no maxbans tag is #
+# matched, the banlist size defaults to 64 entries. #
+# #
+
+<banlist chan="*" limit="69">
+
+#-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This tag is optional, and specifies one or more features which are #
+# not available to non-operators. #
+# #
+# For example you may wish to disable NICK and prevent non-opers from #
+# changing their nicknames. #
+# Note that any disabled commands take effect only after the user has #
+# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
+# so for example disabling NICK will not cripple your network. #
+# #
+# `fakenonexistant' will make the ircd pretend that nonexistant #
+# commands simply don't exist to non-opers ("no such command"). #
+# #
+#<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Settings to define which features are usable on your server. #
+# #
+
+<options
+ # prefixquit: What (if anything) a users' quit message
+ # should be prefixed with.
+ prefixquit="Quit: "
+
+ # suffixquit: What (if anything) a users' quit message
+ # should be suffixed with.
+ suffixquit=""
+
+ # prefixpart: What (if anything) a users' part message
+ # should be prefixed with.
+ prefixpart="\""
+
+ # suffixpart: What (if anything) a users' part message
+ # should be suffixed with.
+ suffixpart="\""
+
+ # noservices: With this set to no, when a user joins a empty channel,
+ # the server will set +q on them. If set to yes, it will only set +o
+ # on them until they register the channel.
+ noservices="no"
+
+ # qprefix: Prefix (symbol) to use for +q users.
+ qprefix="~"
+
+ # aprefix: Prefix (symbol) to use for +a users.
+ aprefix="&"
+
+ # deprotectself: If this value is set (true, yes or 1), it will allow
+ # +a and +q users to remove the +a and +q from themselves, otherwise,
+ # the status will have to be removed by services.
+ deprotectself="yes"
+
+ # deprotectothers: If this value is set to yes, true, or 1, then any
+ # user with +q or +a may remove the +q or +a from other users.
+ # The default setting is to not enable this feature, so that
+ # only +q may remove +a, and nothing but services may remove +q.
+ deprotectothers="no"
+
+ # syntaxhints: If enabled, if a user fails to send the correct parameters
+ # for a command, the ircd will give back soome help text of what
+ # the correct parameters are
+ syntaxhints="yes"
+
+ # cyclehosts: If enabled, when a user gets a host set, it will cycle
+ # them in all their channels. If not, it will simply change their host
+ # without cycling them.
+ cyclehosts="no"
+
+ # ircumsgprefix: Use undernet-style message prefixing for NOTICE and
+ # PRIVMSG. If enabled, it will add users' prefix to the line, if not,
+ # it will just message the user.
+ ircumsgprefix="no"
+
+ # announcets: If set to yes, when the TS on a channel changes, all users
+ # in channel will be sent a NOTICE about it.
+ announcets="yes"
+
+ # hostintopic: If enabled, channels will show the host of the topicsetter
+ # in the topic.
+ hostintopic="no"
+
+ # pingwarning: If a server does not respond to a ping within x seconds,
+ # it will send a notice to opers with snomask +l informing that the server
+ # is about to ping timeout.
+ pingwarning="15"
+
+ # serverpingfreq: How often pings are sent between servers (in seconds).
+ serverpingfreq="60"
+
+ # allowhalfop: Allows the use of +h channelmode (halfops).
+ allowhalfop="yes"
+
+ # defaultmodes: What modes are set on a empty channel when a user
+ # joins it and it is unregistered. This is similar to Asuka's
+ # autochanmodes.
+ defaultmodes="nt"
+
+ # moronbanner: This is the text that is sent to a user when they are
+ # banned from the server.
+ moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
+
+ # exemptchanops: Defines what channel modes channel operators are
+ # exempt from. Supported modes are +SfFgNc. Defaults to off.
+ exemptchanops=""
+
+ # invitebypassmodes: This allows /invite to bypass other channel modes.
+ # (Such as +k, +j, +l, etc)
+ invitebypassmodes="yes">
+
+
+#-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
+# #
+
+<performance
+ # netbuffersize: Size of the buffer used to recieve data from clients.
+ # The ircd may only read this amount of text in 1 go at any time.
+ netbuffersize="10240"
+
+ # maxwho: Maximum number of results to show in a /who query.
+ # It is not recommended to set this above 1024.
+ maxwho="128"
+
+ # somaxconn: The maximum number of connections that may be waiting
+ # in the accept queue. This is *NOT* the total maximum number of
+ # connections per server. Some systems may only allow this to be up
+ # to 5, while others (such as linux and *BSD) default to 128.
+ somaxconn="128"
+
+ # softlimit: This optional feature allows a defined softlimit for
+ # connections. If defined, it sets a soft max connections value.
+ # must be lower than ./configure maxclients.
+ softlimit="12800"
+
+ # quietbursts: When syncing or splitting from a network, a server
+ # can generate a lof ot connect and quit messages to opers with
+ # +C and +Q snomasks. Setting this to yes squelches those messages,
+ # which makes it easier for opers, but degrades the functionality of
+ # bots like BOPM during netsplits.
+ quietbursts="yes"
+
+ # nouserdns: If enabled, no user DNS lookups will be performed on
+ # connecting users. This can save a lot of resources on very busy servers.
+ nouserdns="no">
+
+#-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
+# #
+
+<security
+
+ # announceinvites: If this option is set, then invites are announced
+ # to the channel when a user invites another user. If you consider
+ # this to be unnecessary noise, set this to 'none'.
+ # To announce to all ops, set this to 'ops' and to announce to all users,
+ # set the value to 'all'. The value 'dynamic' will make the messages
+ # go to every user who has power of INVITE on the channel. This
+ # is the recommended setting.
+ announceinvites="dynamic"
+
+ # hidemodes: If enabled, then the listmodes given will be hidden
+ # from users below halfop. This is not recommended to be set on +b
+ # as it may break some functionality in popular clients such as mIRC.
+ hidemodes="eI"
+
+ # disablehmac: If you are linking your InspIRCd to versions older
+ # than 1.1.6 (NOT RECOMMENDED), then you can specify this option and
+ # set it to yes. 1.1.6 and above support HMAC and challenge-response
+ # for password authentication. These can greatly enhance security of your
+ # server-to-server connections when you are not using SSL.
+ # It is highly recommended to keep this set to no.
+ disablehmac="no"
+
+ # hideulines: If this value is set to yes, U-lined server will
+ # be hidden from non-opers in /links and /map.
+ hideulines="no"
+
+ # flatlinks: If this value is set to yes, /map and /links will
+ # be flattened when shown to non-opers.
+ flatlinks="no"
+
+ # hidewhois: When defined, the given text will be used in place
+ # of the server a user is on when whoised by a non-oper. Most
+ # networks will want to set this to something like "*.netname.net"
+ # to conceal the actual server a user is on.
+ hidewhois=""
+
+ # hidebans: If this value is set to yes, when a user is banned ([gkz]lined)
+ # only opers will see the ban message when the user is removed
+ # from the server..
+ hidebans="no"
+
+ # hidekills: If defined, replaces who set a /kill with a custom string.
+ hidekills=""
+
+ # hidesplits: If enabled, non-opers will not be able to see which
+ # servers split in a netsplit, they will only be able to see that one
+ # occurred (If their client has netsplit detection).
+ hidesplits="no"
+
+ # maxtargets: Maximum number of targets per command.
+ # (Commands like /notice, /privmsg, /kick, etc)
+ maxtargets="20"
+
+ # customversion: Displays a custom string when a user /version's
+ # the ircd. This may be set for security reasons or vanity reasons.
+ customversion=""
+
+ # operspywhois: If this is set, when a oper /whois 's a user,
+ # it will show all channels the user is in including +s and +p
+ # channels.
+ operspywhois="yes"
+
+ # userstats: /stats commands that users can run (oeprs can run all).
+ userstats="Pu">
+
+#-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This configuration tag defines the maximum sizes of various types #
+# on IRC, such as the maximum length of a channel name, and the #
+# maximum length of a channel. Note that with the exception of the #
+# identmax value all values given here are the exact values you would #
+# expect to see on IRC. This contrasts with the older InspIRCd #
+# releases where these values would be one character shorter than #
+# defined to account for a null terminator on the end of the text. #
+# #
+# These values should match network-wide otherwise issues will occur. #
+
+<limits
+ # maxnick: Maximum length of a nickname.
+ maxnick="31"
+
+ # maxchan: Maximum length of a channel name.
+ maxchan="64"
+
+ # maxmodes: Maximum number of mode changes per line.
+ maxmodes="20"
+
+ # maxident: Maximum length of a ident/username.
+ maxident="11"
+
+ # maxquit: Maximum length of a quit message.
+ maxquit="255"
+
+ # maxtopic: Maximum length of a channel topic.
+ maxtopic="307"
+
+ # maxkick: Maximum length of a kick message.
+ maxkick="255"
+
+ # maxgecos: Maximum length of a GECOS (realname).
+ maxgecos="128"
+
+ # maxaway: Maximum length of an away messahe.
+ maxaway="200">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Logging
+# -------
+#
+# Logging is covered with the <log> tag, which you may use to change
+# the behaviour of the logging of the IRCd.
+#
+# In InspIRCd as of 1.2, logging is pluggable and very extensible.
+# Different files can log the same thing, different 'types' of log can
+# go to different places, and modules can even extend the log tag
+# to do what they want.
+#
+# An example log tag would be:
+# <log method="file" type="OPER" level="default" target="opers.log">
+# which would log all information on /oper (failed and successful) to
+# a file called opers.log.
+#
+# There are many different types which may be used, and modules may
+# generate their own. A list of useful types:
+# - USERS - information relating to user connection and disconnection
+# - CHANNELS - information relating to joining and parting of channels.
+# XXX someone doc more on this
+#
+# You may also log *everything* by using a type of *, and subtract things out
+# of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
+#
+# The following log tag is highly default and uncustomised. It is recommended you
+# sort out your own log tags. This is just here so you get some output.
+
+<log method="file" type="* -USERINPUT -USEROUTPUT -m_spanningtree" level="default" target="ircd.log">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This tag lets you define the behaviour of the /whowas command of #
+# your server. #
+# #
+
+<whowas
+ # groupsize: Maximum entries per nick shown when performing
+ # a /whowas nick.
+ groupsize="10"
+
+ # maxgroups: Maximum number of nickgroups that can be added to
+ # the list so that /whowas does not use a lot of resources on
+ # large networks.
+ maxgroups="100000"
+
+ # maxkeep: Maximum time a nick is kept in the whowas list
+ # before being pruned. Time may be specified in seconds,
+ # or in the following format: 1y2w3d4h5m6s. Minimum is
+ # 1 hour.
+ maxkeep="3d">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# The ban tags define nick masks, host masks and ip ranges which are #
+# banned from your server. All details in these tags are local to #
+# Your server. #
+# #
+
+<badip
+ # ipmask: IP range to ban. Wildcards and CIDR can be used.
+ ipmask="69.69.69.69"
+
+ # reason: Reason to display when user is disconnected.
+ reason="No porn here thanks.">
+
+<badnick
+ # nick: Nick to disallow. Wildcards are supported.
+ nick="ChanServ"
+
+ # reason: Reason to display on /nick.
+ reason="Reserved For Services">
+<badnick nick="NickServ" reason="Reserved For Services">
+<badnick nick="OperServ" reason="Reserved For Services">
+<badnick nick="MemoServ" reason="Reserved For Services">
+
+<badhost
+ # host: ident@hostname to ban.
+ # Wildcards and CIDR (if you specify an IP) can be used.
+ host="*@hundredz.n.hundredz.o.1337.kiddies.com"
+
+ # reason: Reason to display when user is disconnected
+ reason="Too many 1337 kiddiots">
+<badhost host="*@localhost" reason="No irc from localhost!">
+<badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
+
+# exception: Hosts that are exempt from [kgz]lines.
+<exception
+ # host: ident@hostname to exempt.
+ # Wildcards and CIDR (if you specify an IP) can be used.
+ host="*@ircop.host.com"
+
+ # reason: Reason for exception. Only shown in /stats e
+ reason="Opers hostname">
+
+#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# This optional tag allows you to specify how wide a gline, eline, #
+# kline, zline or qline can be before it is forbidden from being #
+# set. By setting hostmasks="yes", you can allow all G, K, E lines, #
+# no matter how many users the ban would cover. This is not #
+# recommended! By setting ipmasks="yes", you can allow all Z lines, #
+# no matter how many users these cover too. Needless to say we #
+# don't recommend you do this, or, set nickmasks="yes", which will #
+# allow any qline. #
+# #
+
+<insane
+ # hostmasks: Allow bans with insane hostmasks (over-reaching bans)
+ hostmasks="no"
+
+ # ipmasks: Allow bans with insane ipmasks (over-reaching bans)
+ ipmasks="no"
+
+ # nickmasks: Allow bans with insane nickmasks (over-reaching bans)
+ nickmasks="no"
+
+ # trigger: What percentage of users on the network to trigger
+ # specifying an insane ban as. The default is 95.5%, which means
+ # if you have a 1000 user network, a ban will not be allowed if it
+ # will be banning 955 or more users.
+ trigger="95.5">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# Well done, you've reached the end of the basic configuration, your #
+# ircd should now start if you want to try it out! (./inspircd start) #
+# #
+# We now suggest you read and edit modules.conf, as modules are what #
+# provide almost all the features of InspIRCd. :) #
+# #
+# The default does nothing -- we include it for simplicity for you. #
+#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# These tags define which modules will be loaded on startup by your #
+# server. Add modules without any paths. When you make your ircd #
+# using the 'make' command, all compiled modules will be moved into #
+# the folder you specified when you ran ./configure. The module tag #
+# automatically looks for modules in this location. #
+# If you attempt to load a module outside of this location, either #
+# in the config, or via /LOADMODULE, you will receive an error. #
+# #
+# By default, ALL modules are commented out. You must uncomment them #
+# or add lines to your config to load modules. Please refer to #
+# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
+# each modules link for any additional conf tags they require. #
+# #
+# You may use wildcards in a <module> tag to load all modules which #
+# match a glob pattern (e.g. m_sa????.so would load m_sajoin, #
+# m_sapart, m_saquit and m_sanick) #
+# #
+# ____ _ _____ _ _ ____ _ _ _ #
+# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
+# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
+# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
+# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
+# #
+# To link servers to InspIRCd, you MUST load the m_spanningtree #
+# module, as shown below. If you DO NOT do this, server links will #
+# NOT work at all. ie. The ports will NOT bind, and /connect will not #
+# work properly. This is by design, to allow for the implementation #
+# of other linking protocols in modules in the future. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Spanning Tree module - allows linking of servers using the spanning
+# tree protocol (see the READ THIS BIT section above).
+# You will almost always want to load this.
+#
+<module name="m_spanningtree.so">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MD5 Module - Allows other modules to generate MD5 hashes, usually for
+# cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_cloaking.so and m_password_hash.so may rely on
+# this module being loaded to function.
+#
+<module name="m_md5.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SHA256 Module - Allows other modules to generate SHA256 hashes,
+# usually for cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules such as m_password_hash.so may rely on this module being
+# loaded to function. Certain modules such as m_spanningtree.so will
+# function without this module but when it is loaded their features will
+# be enhanced (for example the addition of HMAC authentication).
+#
+<module name="m_sha256.so">
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes,
+# usually for cryptographic uses and security.
+#
+# IMPORTANT:
+# Other modules may rely on this module being loaded to function.
+<module name="m_ripemd160.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Abbreviation module: Provides the ability to abbreviate commands a-la
+# BBC BASIC keywords.
+<module name="m_abbreviation.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alias module: Allows you to define server-side command aliases
+#<module name="m_alias.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_alias.so module loaded, you may also define #
+# aliases as shown below. They are commonly used to provide shortcut #
+# commands to services, however they are not limited to just this use.#
+# An alias tag requires the following values to be defined in it: #
+# #
+# text - The text to detect as the actual command line, #
+# Cant contain spaces, but case insensitive. #
+# You may have multiple aliases with the same #
+# command name (text="" value), however the first #
+# found will be executed if its format value is #
+# matched, or it has no format value. Aliases are #
+# read from the top of the file to the bottom. #
+# #
+# format - If this is defined, the parameters of the alias #
+# must match this glob pattern. For example if you #
+# want the first parameter to start with a # for #
+# the alias to be executed, set format="#*" in the #
+# alias definition. Note that the :'s which are #
+# part of IRC formatted lines will be preserved #
+# for matching of this text. This value is #
+# optional. #
+# #
+# replace - The text to replace 'text' with. Usually this #
+# will be "PRIVMSG ServiceName :$2-" or similar. #
+# You may use the variables $1 through $9 in the #
+# replace string, which refer to the first through #
+# ninth word in the original string typed by the #
+# user. You may also use $1- through $9- which #
+# refer to the first word onwards, through to the #
+# ninth word onwards, e.g. if the user types the #
+# command "foo bar baz qux quz" then $3- will hold #
+# "baz qux quz" and $2 will contain "bar". You may #
+# also use the special variables: $nick, $ident, #
+# $host and $vhost, and you may separate multiple #
+# commands with \n. If you wish to use the ACTUAL #
+# characters \ and n together in a line, you must #
+# use the sequence "\\n". #
+# #
+# requires - If you provide a value for 'requires' this means #
+# the given nickname MUST be online for the alias #
+# to successfully trigger. If they are not, then #
+# the user receives a 'no such nick' 401 numeric. #
+# #
+# uline - Defining this value with 'yes', 'true' or '1' #
+# will ensure that the user given in 'requires' #
+# must also be on a u-lined server, as well as #
+# actually being on the network. If the user is #
+# online, but not on a u-lined server, then an #
+# oper-alert is sent out as this is possibly signs #
+# of a user trying to impersonate a service. #
+# #
+# operonly - Defining this value, with a value of 'yes', '1' #
+# or true will make the alias oper only. If a non- #
+# oper attempts to use the alias, it will appear #
+# to not exist. #
+# #
+#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
+#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
+#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
+#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
+#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
+#
+# An example of using the format value to create an alias with two
+# different behaviours depending on the format of the parameters.
+#
+#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
+# requires="ChanServ" uline="yes">
+#
+#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
+# requires="NickServ" uline="yes">
+#
+# This alias fixes a glitch in xchat 2.6.x and above and the way it
+# assumes IDENTIFY must be prefixed by a colon (:) character. It should
+# be placed ABOVE the default NICKSERV alias (the first example) listed
+# above.
+#
+#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
+# requires="NickServ" uline="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Allowinvite module: Gives channel mode +A to allow all users to use
+# /invite, and extban A to deny invite from specific masks
+<module name="m_allowinvite.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Alltime module: Shows time on all connected servers at once.
+# This module is oper-only and provides /alltime.
+# To use, ALLTIME must be in one of your oper class blocks.
+<module name="m_alltime.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibear security module: Prevents 'bear.txt' based trojans from
+# connecting to your network by sending them a numeric they can't handle.
+<module name="m_antibear.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Antibottler module: Labels bottler leech bots
+<module name="m_antibottler.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Auditorium module: Adds channel mode +u which makes everyone else
+# except you in the channel invisible, used for large meetings etc.
+<module name="m_auditorium.so">
+#
+# Auditorium settings:
+#
+<auditorium showops="no" operoverride="no">
+#
+# showops:
+# Setting this value to yes makes m_auditorium behave like unrealircd
+# +u channel mode, e.g. ops see users joining, parting, etc, and users
+# joining the channel see the ops. Without this flag, the mode acts
+# like ircnet's +a (anonymous channels), showing only the user in the
+# names list, and not even showing the ops in the list, or showing the
+# ops that the user has joined.
+# operoverride:
+# Setting this value to yes makes m_auditorium affect the userlist for
+# regular users only. Opers will view all users in the channel normally.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban except module: Adds support for channel ban exceptions (+e)
+<module name="m_banexception.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban redirection module: Allows bans which redirect to a specified
+# channel. e.g. +b nick!ident@host#channelbanneduserissentto
+<module name="m_banredirect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block amsg module: Attempt to block all usage of /amsg and /ame
+<module name="m_blockamsg.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_blockamsg.so module loaded, you can configure it #
+# with the <blockamsg> tag: #
+# #
+# delay - How many seconds between two messages to force #
+# them to be recognised as unrelated. #
+# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
+# or 'killopers'. Define how to take action when #
+# a user uses /amsg or /ame. #
+#
+<blockamsg delay="3" action="killopers">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block CAPS module: Blocking all-CAPS messages with cmode +B
+<module name="m_blockcaps.so">
+# #
+#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# percent - How many percent of text must be caps before text #
+# will be blocked. #
+# #
+# minlen - The minimum length a line must be for the block #
+# percent to have any effect. #
+# #
+# capsmap - A list of chars to be considered CAPS, this was #
+# you can add CAPS for your language. Also you can #
+# add things like ! and space to further lock down #
+# on caps usage. #
+<blockcaps percent="50"
+ minlen="5"
+ capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Block colour module: Blocking colour-coded messages with cmode +c
+<module name="m_blockcolor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Botmode module: Adds the user mode +B
+<module name="m_botmode.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CallerID module: Adds usermode +g which activates hybrid-style
+# callerid (== block all private messages unless you /accept first)
+<module name="m_callerid.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# maxaccepts - Maximum number of entires a user can add to his #
+# /accept list. Default is 16 entries. #
+# operoverride - Can opers (note: ALL opers) ignore callerid mode? #
+# Default is no. #
+# tracknick - Preserve /accept entries when a user changes nick? #
+# If no (the default), the user is removed from #
+# everyone's accept list if he changes nickname. #
+# cooldown - Amount of time (in seconds) that must pass since #
+# the last notification sent to a user before he can #
+# be sent another. Default is 60 (1 minute). #
+<callerid maxaccepts="16"
+ operoverride="no"
+ tracknick="no"
+ cooldown="60">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CAP module: Provides the CAP negotiation mechanism seen in
+# ratbox-derived ircds
+<module name="m_cap.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CBAN module: Lets you disallow channels from being used at runtime.
+# This module is oper-only and provides /cban.
+# To use, CBAN must be in one of your oper class blocks.
+<module name="m_cban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Censor module: Adds the channel mode +G
+#<module name="m_censor.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_censor module, then you must #
+# specify some censor tags. See also: #
+# http://www.inspircd.org/wiki/Censor_Module #
+#
+#<include file="censor.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
+# (http://cgiirc.sourceforge.net).
+#<module name="m_cgiirc.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# Optional - If you specify to use m_cgiirc, then you must specify one
+# or more cgihost tags which indicate authorised CGI:IRC servers which
+# will be connecting to your network, and an optional cgiirc tag.
+# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module
+#
+# Set to yes if you want to notice opers when CGI clients connect
+# <cgiirc opernotice="no">
+#
+# The type field indicates where the module should get the real
+# client's IP address from, for further information, please see the
+# CGI:IRC documentation.
+#
+# Old style:
+# <cgihost type="pass" mask="www.mysite.com"> # Get IP from PASS
+# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
+# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
+# New style:
+# <cgihost type="webirc" pass="foobar"
+# mask="somebox.mysite.com"> # Get IP from WEBIRC
+#
+# IMPORTANT NOTE:
+# ---------------
+#
+# When you connect CGI:IRC clients, there are two connect classes which
+# apply to these clients. When the client initially connects, the connect
+# class which matches the cgi:irc site's host is checked. Therefore you
+# must raise the maximum local/global clients for this ip as high as you
+# want to allow cgi clients. After the client has connected and is
+# determined to be a cgi:irc client, the class which matches the client's
+# real IP is then checked. You may set this class to a lower value, so that
+# the real IP of the client can still be restricted to, for example, 3
+# sessions maximum.
+#
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel create module: Adds snomask +j, which will notify opers of
+# any new channels that are created.
+# This module is oper-only.
+<module name="m_chancreate.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel filter module: Allows channel-op defined message
+# filtering using simple string matches (channel mode +g)
+<module name="m_chanfilter.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel logging module: used to send snotice output to channels, to
+# allow staff to centrally monitor and discuss network activity.
+#
+# The "channel" field is where you want the messages to go, "snomasks"
+# is what snomasks you want to be sent to that channel. Multiple tags
+# are allowed.
+#<module name="m_chanlog.so">
+#<chanlog snomasks="AOcC" channel="#opers">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channelban: Implements extended ban j:, which stops anyone in already
+# in a channel matching a mask like +b j:#channel*mask from joining.
+<module name="m_channelban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Chanprotect module: gives +q and +a channel modes
+<module name="m_chanprotect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Check module: gives /check
+# Check is useful for looking up information on channels,
+# users, IP addresses and hosts.
+# This module is oper-only.
+# To use, CHECK must be in one of your oper class blocks.
+<module name="m_check.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGHOST module: Adds the /CHGHOST command
+# This module is oper-only.
+# To use, CHGHOST must be in one of your oper class blocks.
+<module name="m_chghost.so">
+#
+#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
+# Optional - If you want to use special chars for hostnames you can #
+# specify your own custom list of chars with the <hostname> tag: #
+# #
+# charmap - A list of chars accepted as valid by the /CHGHOST #
+# and /SETHOST commands. Also note that the list is #
+# case-sensitive. #
+<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGIDENT module: Adds the /CHGIDENT command
+# This module is oper-only.
+# To use, CHGIDENT must be in one of your oper class blocks.
+<module name="m_chgident.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# CHGNAME module: Adds the /CHGNAME command
+# This module is oper-only.
+# To use, CHGNAME must be in one of your oper class blocks.
+<module name="m_chgname.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Cloaking module: Adds usermode +x and cloaking support.
+# Relies on the module m_md5.so being loaded before m_cloaking.so in
+# the configuration file.
+# To use, you should enable m_conn_umodes and add +x as
+# an enabled mode. See the m_conn_umodes module for more information.
+<module name="m_cloaking.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify the m_cloaking.so module as above, you #
+# must define cloak keys, and optionally a cloak prefix as shown #
+# below. When using cloaking, the cloak keys are MANDITORY and must #
+# be included. However, if prefix is not included, it will default #
+# to your networks name from the <server> tag. You can also include #
+# the following optional values: #
+# #
+# ipalways - Always cloak the IP address, not the hostname, #
+# which doesn't reveal the user's ISP, but #
+# results in hosts that are harder to read and #
+# ban. #
+# #
+# lowercase - Display the cloaked hostnames in lowercase #
+# characters instead of uppercase #
+# #
+ <cloak key1="0x2AF39F40"
+ key2="0x78E10B32"
+ key3="0x4F2D2E82"
+ key4="0x043A4C81"
+ prefix="mynet"
+ ipalways="false"
+ lowercase="false">
+# #
+# Please note that the key values will accept any number, and should #
+# be large numbers. Using small numbers such as "7" or "1924" will #
+# seriously weaken the security of your cloak. It is recommended you #
+# use hexdecimal numbers prefixed by "0x", as shown in this example, #
+# with each key eight hex digits long. #
+
+#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Close module: Allows an oper to close all unregistered connections.
+# This module is oper-only and provides /close.
+# To use, CLOSE must be in one of your oper class blocks.
+<module name="m_close.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Clones module: Adds an oper command /CLONES for detecting cloned
+# users. Warning: This module may be resource intensive when its
+# command is issued, use with care.
+# This module is oper-only.
+# To use, CLONES must be in one of your oper class blocks.
+<module name="m_clones.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Common channels module: Adds user mode +c, which, when set, requires
+# that users must share a common channel with you to PRIVMSG or NOTICE
+# you.
+<module name="m_commonchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Join: Allows you to force users to join one or more channels
+# automatically upon connecting to the server.
+#<module name="m_conn_join.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# If you have m_conn_join.so loaded, you can configure it using the
+# follow values:
+#
+#<autojoin channel="#one,#two,#three">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Usermodes: Set modes on users when they connect
+# When this module is loaded <connect:allow> tags may have an optional
+# modes="" value, which contains modes to add or remove from users
+# when they connect to the server.
+<module name="m_conn_umodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Conn-Wait-for-Pong: Don't let a user connect until they PONG
+#<module name="m_conn_waitpong.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_conn_waitpong.so module loaded, configure it with #
+# the <waitpong> tag: #
+# #
+# sendsnotice - Whether to send a snotice on connect, like other #
+# older ircds #
+# #
+# killonbadreply - Whether to kill the user if they send the wrong #
+# PONG reply. #
+# #
+#<waitpong sendsnotice="yes" killonbadreply="yes">
+
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Channel cycle module. Server side /hop, with +ilk etc bypass.
+<module name="m_cycle.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connectban: Provides IP connection throttling. Any IP range that connects
+# too many times (configurable) in an hour is zlined for a (configurable)
+# duration, and their count resets to 0.
+#
+# ipv4cidr and ipv6cidr allow you to turn the comparison from individual
+# IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling
+# over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
+#
+#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
+# This allows for 10 quits in an hour with a 10 minute ban if that is exceeded.
+#
+#<module name="m_connectban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Connection throttle module. Configuration:
+#<module name="m_connflood.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# seconds, maxconns - Amount of connections per <seconds>.
+#
+# timeout - Time to wait after the throttle was activated
+# before deactivating it. Be aware that the time
+# is seconds + timeout.
+#
+# quitmsg - The message that users get if they attempt to
+# connect while the throttle is active.
+#
+# bootwait - Amount of time to wait before enforcing the
+# throttling when the server just booted.
+#
+#<connflood seconds="30" maxconns="3" timeout="30"
+# quitmsg="Throttled" bootwait="10">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Custom title module: Adds the /TITLE command which allows for trusted
+# users to gain a custom whois line and a optional
+# vhost can be specified.
+#<module name="m_customtitle.so">
+#
+#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# name - The username used to identify
+# password - The password used to identify
+# host - Allowed hostmask [optional]
+# title - Title shown in whois
+# vhost - Displayed host [optional]
+#
+#<title name="foo" password="bar" title="Official Chat Helper">
+#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DCCALLOW module: Adds the /DCCALLOW command
+<module name="m_dccallow.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# blockchat - Whether to block DCC CHAT as well as DCC SEND
+# length - Default duration of entries in DCCALLOW list
+# action - Default action to take if no action is specified
+# can be 'block' or 'allow'
+#
+# File configuration:
+# pattern - The glob pattern to match against
+# action - Action to take if a user attempts to send a file
+# that matches this pattern, can be 'block' or 'allow'
+#
+#<dccallow blockchat="yes" length="5m" action="block">
+#<banfile pattern="*.exe" action="block">
+#<banfile pattern="*.txt" action="allow">
+#
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deaf module: adds support for ircu style usermode +d - deaf to
+# channel messages and channel notices.
+<module name="m_deaf.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Delay join module: Adds the channel mode +D which delays all JOIN
+# messages from users until they speak. If they quit or part before
+# speaking, their quit or part message will not be shown to the channel
+# which helps cut down noise on large channels in a more friendly way
+# than the auditorium mode. Only channel ops may set the +D mode.
+<module name="m_delayjoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Deny Channels: Deny Channels from being used by users
+<module name="m_denychans.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you have the m_denychans.so module loaded, you need to specify #
+# the channels to deny: #
+# #
+# name - The channel name to deny. (glob masks are ok) #
+# #
+# allowopers - If operators are allowed to override the deny. #
+# #
+# reason - Reason given for the deny. #
+# #
+# redirect - Redirect the user to a different channel #
+# #
+#<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> #
+#<badchan name="#heaven" redirect="#hell" reason="Nice try!"> #
+# #
+# Redirects will not work if the target channel is set +L. #
+# #
+# Additionally, you may specify channels which are allowed, even if #
+# a badchan tag specifies it would be denied: #
+#<goodchan name="#godsleeps"> #
+# Glob masks are accepted here also.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Devoice Module: Let users devoice themselves.
+<module name="m_devoice.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# DNS Blacklist Module: Provides support for looking up IPs on one or #
+# more blacklists. #
+#<module name="m_dnsbl.so"> #
+# #
+# For configuration options please see the wiki page for m_dnsbl at #
+# http://inspircd.org/wiki/DNS_Blacklist_Module #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Filter module: Provides message filtering, similar to SPAMFILTER.
+#<module name="m_filter.so">
+# #
+# This module depends upon a regex provider such as m_regex_pcre or #
+# m_regex_glob to function. You must specify which of these you want #
+# m_filter to use via the tag below. #
+# #
+# Valid engines are: #
+# #
+# glob - Glob patterns, provided via m_regex_glob.so #
+# pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre #
+# tre - TRE regexps, provided via m_regex_tre.so, requires libtre #
+# posix - POSIX regexps, provided via m_regex_posix.so, not availale #
+# on windows, no dependencies on other operating systems. #
+# #
+#<filteropts engine="glob"> #
+# #
+# Your choice of regex engine must match on all servers network-wide.
+#
+#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_filter module, then #
+# specfiy below the path to the filter.conf file, or define some #
+# <filter> tags. #
+# #
+#<include file="filter.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Foobar module: does nothing - historical relic
+#<module name="m_foobar.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Gecosban: Implements extended ban r:, which stops anyone matching
+# a mask like +b r:*realname?here* from joining a channel.
+<module name="m_gecosban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# GeoIP module: Allows the server admin to ban users by country code.
+#<module name="m_geoip.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# <geoip banunknown="false"> #
+# #
+# Set this value to true or yes to block unknown IP ranges which are #
+# not in the database (usually LAN addresses, localhost, etc) #
+# #
+# <geoban country="TR" reason="This country not permitted"> #
+# #
+# Use one or more of these tags to ban countries by country code. #
+# The country code must be in capitals and should be an ISO country #
+# code such as TR, GB, or US. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Globops module: gives /GLOBOPS and SNOMASK +g
+# This module is oper-only.
+# To use, GLOBOPS must be in one of your oper class blocks.
+<module name="m_globops.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Global load module: Allows loading and unloading of modules network-
+# wide (USE WITH EXTREME CAUTION!)
+# This module is oper-only and provides /gloadmodule, /gunloadmodule
+# and /greloadmodule.
+# To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE
+# must be in one of your oper class blocks.
+#<module name="m_globalload.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HELPOP module: Provides the /HELPOP command
+#<module name="m_helpop.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_helpop.so module, then #
+# specify below the path to the helpop.conf file, or if you like to #
+# make a mess, define your helpop tags in this conf. #
+# #
+#<include file="helpop.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDECHANS module: Allows opers to hide their channels list from non-
+# opers by setting user mode +I on themselves.
+<module name="m_hidechans.so">
+#
+# HIDECHANS can optionally prevent opers from seeing channels on a +I
+# user, for more privacy if set to true.
+# This setting is not recommended for most mainstream networks.
+<hidechans affectsopers="false">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# HIDEOPER module: Allows opers to hide their oper status from non-
+# opers by setting user mode +H on themselves.
+# This module is oper-only.
+<module name="m_hideoper.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Hostchange module: Allows a different style of cloaking
+#<module name="m_hostchange.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you choose to use the m_hostchange.so module. #
+# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
+# #
+#<host suffix="polarbears.org" separator="." prefix="">
+#<hostchange mask="*@fbi.gov" action="addnick">
+#<hostchange mask="*r00t@*" action="suffix">
+#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
+#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# httpd module: Provides http server support for InspIRCd
+#<module name="m_httpd.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# Optional - If you choose to use the m_httpd.so module, then you must
+# specify the port number and other details of your http server:
+#
+#<http ip="192.168.1.10" host="brainwave" port="32006"
+# index="/home/brain/inspircd/http/index.html">
+#
+# You may have as many of these tags as you wish, each with a different
+# IP, port, host or index file. Each one will act as an independent
+# HTTP server.
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http ACL module: Provides access control lists for m_httpd dependent
+# modules. Use this module to restrict pages by IP address and by
+# password.
+#
+#<module name="m_httpd_acl.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+#
+# Restrict access to the m_httpd_stats module to all but the local
+# network and when the correct password is specified:
+#
+# <httpdacl path="/stats*" types="password,whitelist"
+# username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*">
+#
+# Deny all connections to all but the main index page:
+#
+# <httpdacl path="/*" types="blacklist" blacklist="*">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http config module: Allows the server's configuration to be viewed
+# over HTTP. Requires m_httpd.so to be loaded for it to function.
+#<module name="m_httpd_config.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# http stats module: Provides basic stats pages over HTTP
+# Requires m_httpd.so to be loaded for it to function.
+#<module name="m_httpd_stats.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
+#
+#<httpstats stylesheet="http://remote.style/sheet.css">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ident: Provides RFC 1413 ident lookup support
+# When this module is loaded <connect:allow> tags may have an optional
+# useident="yes|no" boolean value, determining whether or not to lookup
+# ident on users matching that connect tag.
+<module name="m_ident.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you are using the m_ident.so module, then you can #
+# specify the timeout for ident lookups here. If not defined, it will #
+# default to one second. This is a non-blocking timeout which holds #
+# the user in a 'connecting' state until the lookup is complete. #
+# The bind value indicates which IP to bind outbound requests to. #
+# #
+<ident timeout="5" bind="">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Invite except module: Adds support for channel invite exceptions (+I)
+<module name="m_inviteexception.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Invisible module - Adds support for usermode +Q (quiet) which lets an
+# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
+# opers are still able to see invisible users, and if an oper with +Q
+# deopers, they will become visible.
+#
+# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you
+# must first add the value canquiet="yes" to that oper's type tag.
+#
+# This module is oper-only.
+#
+<module name="m_invisible.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Join flood module: Adds support for join flood protection (+j)
+<module name="m_joinflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Jump Server module: Adds support for the RPL_REDIR numeric
+# This module is oper-only.
+# To use, JUMPSERVER must be in one of your oper class blocks.
+<module name="m_jumpserver.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
+<module name="m_kicknorejoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Knock module: adds the /KNOCK command and +K channel mode
+<module name="m_knock.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# LDAP authentication module: Adds the ability to authenticate users #
+# via LDAP. This is an extra module which must be enabled explicitly #
+# by symlinking it from modules/extra, and requires the OpenLDAP libs #
+# #
+#<module name="m_ldapauth.so"> #
+# #
+# Configuration: #
+# #
+# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" #
+# attribute="uid" #
+# server="ldap://brainwave.brainbox.cc" #
+# allowpattern="Guest*" #
+# killreason="Access denied" #
+# searchscope="subtree" #
+# binddn="cn=Manager,dc=brainbox,dc=cc" #
+# bindauth="mysecretpass" #
+# verbose="yes"> #
+# #
+# The baserdn indicates the base DN to search in for users. Usually #
+# this is 'ou=People,dc=yourdomain,dc=yourtld'. #
+# #
+# The attribute value indicates the attribute which is used to locate #
+# a user account by name. On POSIX systems this is usually 'uid'. #
+# #
+# The server parameter indicates the LDAP server to connect to. The #
+# ldap:// style scheme before the hostname proper is MANDITORY. #
+# #
+# The allowpattern value allows you to specify a wildcard mask which #
+# will always be allowed to connect regardless of if they have an #
+# account, for example guest users. #
+# #
+# Killreason indicates the QUIT reason to give to users if they fail #
+# to authenticate. #
+# #
+# The searchscope value indicates the subtree to search under. On our #
+# test system this is 'subtree'. Your mileage may vary. #
+# #
+# Setting the verbose value causes an oper notice to be sent out for #
+# every failed authentication to the server, with an error string. #
+# #
+# The binddn and bindauth indicate the DN to bind to for searching, #
+# and the password for the distinguished name. Some LDAP servers will #
+# allow anonymous searching in which case these two values do not #
+# need defining, otherwise they should be set similar to the examples #
+# above. #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
+# used to temporarily close/open for new connections to the server. #
+# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
+# are specified in a <class> tag that the oper is part of. This is so #
+# you can control who has access to this possible dangerous command. #
+# If your server is locked and you got disconnected, do a REHASH from #
+# shell to open up again.
+#
+# This module is oper-only.
+#
+<module name="m_lockserv.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Msg flood module: Adds message/notice flood protection (+f)
+<module name="m_messageflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MsSQL module: Allows other SQL modules to access MS SQL Server
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_mssql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_mssql.so is more complex than described here, see wiki for more #
+# info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module #
+#
+#<database name="db" username="user" password="pass" hostname="localhost" id="db1">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# MySQL module: Allows other SQL modules to access MySQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_mysql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_mysql.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# NAMESX module: Provides support for the NAMESX extension which allows
+# clients to see all the prefixes set on a user without getting confused.
+# This is supported by mIRC, x-chat, klient, and maybe more.
+<module name="m_namesx.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nickchange flood protection module: Allows up to X nick changes in Y seconds.
+# Provides channel mode +F.
+<module name="m_nickflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Nicklock module: Let opers change a user's nick and then stop that
+# user from changing their nick again.
+# This module is oper-only.
+# To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks.
+<module name="m_nicklock.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No ctcp module: Adds the channel mode +C to block CTCPs
+<module name="m_noctcp.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No kicks module: Adds the +Q channel mode
+<module name="m_nokicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No nicks module: Adds the +N channel mode, as well as the +b N:
+# extended bantype. +N stops all users from changing their nick,
+# the +b N: extban stops anyone from matching a +b N:nick!user@host
+# mask from changing their nick.
+<module name="m_nonicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# No Notice module: adds the channel mode +T
+<module name="m_nonotice.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper channels mode: Adds the +O channel mode
+# This module is oper-only.
+<module name="m_operchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper flood module: Removes flood limits from users upon opering up
+# This module is oper-only.
+<module name="m_operflood.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper invex/extban module: Adds +beI type O, to ban, exempt, and invex
+# given oper type masks.
+# e.g, /mode #channel +iI O:* is equivilant to chmode +O, but you
+# may also, e.g. /mode #channel +iI O:AdminTypeOnly to only allow admins.
+# +be work in a similar fashion.
+# This module is oper-only.
+#
+<module name="m_operinvex.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper Join module: Auto-joins opers to a channel upon oper-up
+# This module is oper-only. For the user equivalent, see m_conn_join.
+<module name="m_operjoin.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you are using the m_operjoin.so module, specify options here: #
+# #
+# channel - The channel name to join, can also be a comma #
+# seperated list eg. "#channel1,#channel2". #
+# #
+# override - Lets the oper join walking thru any modes that #
+# might be set, even bans. Use "yes" or "no". #
+# #
+<operjoin channel="#opers" override="no">
+#
+# Alternatively you can use the autojoin="channellist" in a <type> #
+# tag to set specific autojoins for a type of oper, for example: #
+#
+#<type name="Helper" autojoin="#help" classes="...">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper log module: Logs all oper commands to the ircd log at default
+# loglevel.
+# This module is oper-only.
+<module name="m_operlog.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper MOTD module: Provides support for seperate message of the day
+# on oper-up
+# This module is oper-only.
+#<module name="m_opermotd.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# If you are using the m_opermotd.so module, specify the motd here #
+# #
+#<opermotd file="oper.motd">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Override module: Adds support for oper override
+# This module is oper-only.
+<module name="m_override.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_override.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/Oper_Override_Module #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper levels module: Gives each oper a level and prevents
+# actions being taken against higher level opers
+# Specify the level as the 'level' parameter of the <type> tag
+# # This module is oper-only.
+#<module name="m_operlevels.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper modes module: Allows you to specify modes to add/remove on oper
+# Specify the modes as the 'modes' parameter of the <type> tag
+# and/or as the 'modes' parameter of the <oper> tag.
+# This module is oper-only. For the user equivalent, see m_conn_umodes
+<module name="m_opermodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Oper password hash module: Allows hashed oper passwords
+# Relies on the module m_md5.so and/or m_sha256.so being loaded before
+# m_password_hash.so in the configuration file.
+# This module is oper-only.
+<module name="m_password_hash.so">
+#
+#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# To use this module, you must define a hash type for each oper's
+# password you want to hash. For example:
+#
+# <oper name="Brain"
+# host="ident@dialup15.isp.com"
+# hash="sha256"
+# password="a41d730937a53b79f788c0ab13e9e1d5"
+# type="NetAdmin">
+#
+# The types of hashing available vary depending on which hashing modules
+# you load, but usually if you load m_sha256.so and m_md5.so, both md5
+# and sha256 type hashing will be available (the most secure of which
+# is SHA256).
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Permanent Channels module: Channels with the permanent channels mode
+# will remain open even after everyone else has left the channel, and
+# therefore keep things like modes, ban lists and topic. Permanent
+# channels -may- need support from your Services package to function
+# properly with them. This adds channel mode +P.
+# This module is oper-only.
+<module name="m_permchannels.so">
+#
+# You may also create channels on startup by using the <permchannels> block.
+#<permchannels channel="#opers" modes="is" topic="Opers only.">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# PostgreSQL module: Allows other SQL modules to access PgSQL databases
+# through a unified API. You must copy the source for this module
+# from the directory src/modules/extra, plus the file m_sqlv2.h
+#<module name="m_pgsql.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_pgsql.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
+#
+#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Muteban: Implements extended ban m:, which stops anyone matching
+# a mask like +b m:nick!user@host from speaking on channel.
+<module name="m_muteban.so">
+#
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Random Quote module: provides a random quote on connect.
+# NOTE: Some of these may mimic fatal errors and confuse users and
+# opers alike! - BEWARE!
+#<module name="m_randquote.so">
+#
+#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
+# #
+# Optional - If you specify to use the m_randquote.so module, then #
+# specify below the path to the randquotes.conf file. #
+# #
+#<randquote file="randquotes.conf">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Redirect module: Adds channel redirection (mode +L)
+<module name="m_redirect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Regular Expression Provider for Glob or wildcard (?/*) matching.
+# You must have at least 1 provider loaded to use m_filter or m_rline
+# modules. This module has no additional requirements, as it uses the
+# matching already present in InspIRCd core.
+#<module name="m_regex_glob.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Regular Expression Provider for PCRE (Perl-Compatible Regular
+# Expressions). You need libpcre installed to compile and load this
+# module. You must have at least 1 provider loaded to use m_filter or
+# m_rline.
+#<module name="m_regex_pcre.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Regular Expression Provider for POSIX Regular Expressions.
+# You shouldn't need any additional libraries on a POSIX-compatible
+# system (ie: any Linux, BSD, but not Windows). You must have at least
+# 1 provider loaded to use m_filter or m_rline.
+# On POSIX-compliant systems, regex syntax can be found by using the
+# command: 'man 7 regex'.
+#<module name="m_regex_posix.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Regular Expression Provider for TRE Regular Expressions.
+# This is the same regular expression engine used by UnrealIRCd, so
+# if you are most familiar with the syntax of /spamfilter from there,
+# this is the provider you want. You need libtre installed in order
+# to compile and load this module.
+#<module name="m_regex_tre.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Registered users only channel creation
+# Allows only registered users and opers to create new channels.
+#<module name="m_regonlycreate.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Remove module: Adds the /REMOVE command which is a peaceful
+# alternative to /KICK
+<module name="m_remove.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restrict banned users module:
+# Disallows banned users on a channel from messaging the channel,
+# changing nick, or changing the topic, if loaded.
+<module name="m_restrictbanned.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restricted channels module: Allows only opers to create channels
+#<module name="m_restrictchans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Restrict message module: Allows users to only message opers
+#<module name="m_restrictmsg.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Ban users through regular expression patterns
+#<module name="m_rline.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# If you wish to re-check a user when they change nickname (can be
+# useful under some situations, but *can* also use CPU with more users
+# on a server) then set the following configuration value:
+# Also, this is where you set what Regular Expression engine is to be
+# used. If you ever change it while running, all of your R-Lines will be
+# wiped. This is the regex engine used by all R-Lines set, and
+# m_regex_<engine>.so must be loaded, or rline will be nonfunctional
+# until you load it or change the engine to one that is loaded.
+#
+#<rline matchonnickchange="yes" engine="pcre">
+#
+# Generally, you will NOT want to use 'glob' here, as this turns
+# rline into just another gline. The exceptions are that rline will
+# always use the full nick!user@host realname string, rather than only
+# user@host, but beware that only the ? and * wildcards are available,
+# and are the only way to specify where the space can occur if you do
+# use glob. For this reason, is recommended to use a real regex engine
+# so that at least \s or [[:space:]] is available.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# JSON-RPC module: Encode and decode JSON-RPC requests for modules
+#<module name="m_rpc_json.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# RPC test module: A test of the RPC API
+#<module name="m_rpctest.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Provide /LIST throttling (to prevent flooding) and /LIST safety to
+# prevent excess flood when the list is large.
+#<module name="m_safelist.so">
+#
+#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+#
+# When using Safelist, you may set the following values;
+#
+# The first value, 'throttle', sets the amount of time in seconds a user
+# must wait between LIST commands. For example, if this is set to 60
+# (the default) then the user may not /LIST more than once a minute.
+# If not defined, the default value is 60 seconds.
+#
+# The second value, 'maxlisters', indicates the maximum number of users
+# which may be retrieving a LIST at once. It is not recommended you raise
+# this value, as increasing it too high can make your network vulnerable
+# to floodbots which waste your bandwidth and CPU time with LIST requests.
+#
+#<safelist throttle="60" maxlisters="50">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAJOIN module: Adds the /SAJOIN command
+# This module is oper-only.
+# To use, SAJOIN must be in one of your oper class blocks.
+<module name="m_sajoin.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAMODE module: Adds the oper /SAMODE command
+# This module is oper-only.
+# To use, SAMODE must be in one of your oper class blocks.
+<module name="m_samode.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SANICK module: Allows opers to change user's nicks
+# This module is oper-only.
+# To use, SANICK must be in one of your oper class blocks.
+<module name="m_sanick.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAPART module: Adds the oper /SAPART command
+# This module is oper-only.
+# To use, SAPART must be in one of your oper class blocks.
+<module name="m_sapart.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
+# This module is oper-only.
+# To use, SAQUIT must be in one of your oper class blocks.
+<module name="m_saquit.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SASL authentication module: Provides support for IRC Authentication
+# Layer (aka: atheme SASL) via AUTHENTICATE.
+<module name="m_sasl.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Secure list module: Prevent /LIST in the first minute of connection,
+# crippling most spambots and trojan spreader bots.
+<module name="m_securelist.so">
+#
+#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# Securelist can be harmful to some irc search engines such as #
+# netsplit.de and searchirc.com. To prevent securelist blocking these #
+# sites from listing, define exception tags as shown below: #
+<securehost exception="*@*.searchirc.org">
+<securehost exception="*@*.netsplit.de">
+<securehost exception="*@echo940.server4you.de">
+# #
+# Define the following variable to change how long a user must wait #
+# before issuing a LIST. If not defined, defaults to 60 seconds. #
+# #
+<securelist waittime="30">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Servprotect module: Provides support for Austhex style +k /
+# UnrealIRCD +S services mode
+#<module name="m_servprotect.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# See nicks module: Allow for SNOMASK +N which shows nick changes.
+# This module is oper-only.
+<module name="m_seenicks.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Set Idle module: Adds a command for opers to change their
+# idle time (mainly a toy)
+# This module is oper-only.
+# To use, SETIDLE must be in one of your oper class blocks.
+<module name="m_setidle.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via user mode +r, which
+# is similar to the DALnet and dreamforge systems.
+#
+# N O T E!!
+# >> This CAN NOT be used at the same time as m_services_account <<
+# N O T E!!
+# *** This module DOES NOT support Atheme services, please use ***
+# *** m_services_account if you are planning on using Atheme. ***
+#<module name="m_services.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Services support module: Adds several usermodes such as +R and +M
+# this module implements the 'identified' state via account names (AC)
+# and is similar in operation to the way asuka and ircu handle services.
+#
+# Also of note is that this module implements two extbans:
+# +b R: (stop matching account names from joining)
+# +b M: (stop matching account names from speaking)
+#
+# N O T E!!
+# >> This CAN NOT be used at the same time as m_services <<
+# N O T E!!
+#<module name="m_services_account.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Sethost module: Adds the /SETHOST command
+# This module is oper-only.
+# To use, SETHOST must be in one of your oper class blocks.
+# See m_chghost for how to customise valid chars for hostnames
+<module name="m_sethost.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Setident module: Adds the /SETIDENT command
+# This module is oper-only.
+# To use, SETIDENT must be in one of your oper class blocks.
+<module name="m_setident.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SETNAME module: Adds the /SETNAME command
+# This module is oper-only.
+# To use, SETNAME must be in one of your oper class blocks.
+<module name="m_setname.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Serverban: Implements extended ban s:, which stops anyone connected
+# to a server matching a mask like +b s:server.mask.here from joining.
+<module name="m_serverban.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Show Whois module: Adds the +W usermode which allows opers
+# to see when they are whois'ed (can be annoying).
+# This module is oper-only.
+<module name="m_showwhois.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Shun module: Provides the /shun command, which stops a user executing
+# most commands.
+# This module is oper-only.
+# To use, SHUN must be in one of your oper class blocks.
+<module name="m_shun.so">
+#
+# You may also configure which commands you wish a user to be able to
+# perform. It should be noted that if a shunned user issues QUIT or PART
+# then their message will be removed, as if they did not issue one.
+#
+# You may also (optionally) let the user know that their command was blocked.
+#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Spy module: Provides the ability to see the complete names list of
+# channels an oper is not a member of
+# This module is oper-only.
+<module name="m_spy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL channel mode module: Adds support for SSL-only channels (+z).
+# does not do anything useful without a working SSL module (see below)
+#<module name="m_sslmodes.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Dummy ssl module: If you have other servers on your network which
+# have SSL, but your server does not have ssl enabled, you should load
+# this module, which will handle SSL metadata (e.g. the "Is using ssl"
+# field in the WHOIS information).
+#<module name="m_ssl_dummy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
+# if enabled. You must copy the source for this module from the directory
+# src/modules/extra, or answer 'yes' in ./configure when asked if you
+# want to enable this, or it will not load.
+#<module name="m_ssl_gnutls.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
+# #
+# NOTE: If you want to use this module to encrypt and sign your #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file! #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL Info module: Allows users to retrieve information about other
+# user's peer SSL certificates and keys. This can be used by client
+# scripts to validate users. For this to work, one of m_ssl_gnutls.so
+# or m_ssl_openssl.so must be loaded. You must symlink the source for
+# this module from the directory src/modules/extra.
+#<module name="m_sslinfo.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
+# if enabled. You must copy the source for this module from the directory
+# src/modules/extra, or answer 'yes' in ./configure when asked if you
+# want to enable this, or it will not load.
+#<module name="m_ssl_openssl.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_ssl_openssl.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
+# #
+# NOTE: If you want to use this module to encrypt and sign your #
+# server to server traffic, you MUST load it before m_spanningtree in #
+# your configuration file! #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
+# stored within their SSL certificate and key pair.
+# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
+# be loaded. An extra value should be added to enabled opers, which
+# is in the following format: fingerprint="<hash>". For more information,
+# see the example in the oper blocks.
+# This module is oper-only.
+#<module name="m_ssl_oper_cert.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Strip colour module: Adds the channel mode +S
+<module name="m_stripcolor.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SILENCE module: Adds support for /SILENCE
+<module name="m_silence.so">
+#
+# Configuration tags:
+#
+<silence maxentries="32">
+#
+# Sets the maximum number of entries on a users silence list.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLite3 module: Allows other SQL modules to access SQLite3 #
+# databases through a unified API. You must link the source for this #
+# module from the directory src/modules/extra to src/modules, plus #
+# the file m_sqlv2.h #
+#<module name="m_sqlite3.so">
+#
+#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_sqlite.so is more complex than described here, see the wiki for #
+# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module #
+#
+#<database hostname="/full/path/to/database.db" id="anytext">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQLutils module: Provides some utilities to SQL client modules, such
+# as mapping queries to users and channels. You must copy the source
+# for this module from the directory src/modules/extra/m_sqlutils.cpp
+# and src/modules/extra/m_sqlutils.h into /src/modules
+# Needed for, and loaded before: SQLauth and SQLoper
+#<module name="m_sqlutils.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL authentication module: Allows IRCd connections to be tied into
+# a database table (for example a forum). You must copy the source for
+# this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
+#<module name="m_sqlauth.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# m_sqlauth.so is too complex it describe here, see the wiki: #
+# http://www.inspircd.org/wiki/SQL_Authentication_Module #
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL logging module: Allows you to log network-wide data for your
+# network in a fully normalised set of SQL tables. You must copy the
+# source for this module from the directory src/modules/extra
+#<module name="m_sqllog.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# dbid - Database ID to use (see m_sql) #
+# #
+# See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
+# #
+#<sqllog dbid="1">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SQL oper module: Allows you to store oper credentials in an SQL table
+# You must copy the source for this module from the directory src/modules/extra
+# Depends on the SQLutils module being loaded first.
+#<module name="m_sqloper.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# dbid - Database ID to use (see m_sql) #
+# hash - Hashing provider to use for password hashing #
+# #
+# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
+# #
+#<sqloper dbid="1" hash="md5">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
+# added/removed by Services. #
+#<module name="m_svshold.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
+# This module is oper-only.
+# To use, SWHOIS must be in one of your oper class blocks.
+<module name="m_swhois.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Taxonomy module: Adds the /TAXONOMY command, used to view all
+# metadata attached to a user.
+# This module is oper-only.
+# To use, TAXONOMY must be in one of your oper class blocks.
+<module name="m_taxonomy.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test command module: Does nothing significant. Read: pointless.
+#<module name="m_testcommand.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Timed bans module: Adds timed bans and the /TBAN command
+# This module is oper-only.
+# To use, TBAN must be in one of your oper class blocks.
+<module name="m_timedbans.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Test line module: Adds the /TLINE command, used to test how many
+# users a /GLINE or /ZLINE etc would match.
+# This module is oper-only.
+# To use, TLINE must be in one of your oper class blocks.
+<module name="m_tline.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# UHNAMES support module: Adds support for the IRCX style UHNAMES
+# extension, which displays ident and hostname in the names list for
+# each user, saving clients from doing a WHO on the channel. Note that
+# this module is not widely supported yet. If a client does not support
+# UHNAMES it will not enable it, this will not break incompatible
+# clients.
+<module name="m_uhnames.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Uninvite module: Adds the /UNINVITE command which lets users remove
+# pending invites from channels without waiting for the user to join.
+<module name="m_uninvite.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Userip module: Adds the /USERIP command
+# This module is oper-only.
+# To use, USERIP must be in one of your oper class blocks.
+<module name="m_userip.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Vhost module: Adds the VHOST command which allows for adding virtual
+# hosts which are accessible using a username and password in the config.
+#<module name="m_vhost.so">
+#
+#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
+# #
+# user - Username for the vhost. #
+# #
+# pass - Password for the vhost. #
+# #
+# host - Vhost to set. #
+#
+#<vhost user="some_username" pass="some_password" host="some.host">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# Watch module: Adds the WATCH command, which is used by clients to
+# maintain notify lists.
+<module name="m_watch.so">
+#
+# Configuration tags:
+#
+<watch maxentries="32">
+#
+# Sets the maximum number of entries on a user's watch list.
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
+# in a file "xline.db" which can be re-loaded on restart. This is useful
+# for two reasons: it keeps bans so users may not evade them, and on
+# bigger networks, server connections will take less time as there will
+# be a lot less bans to apply - as most of them will already be there.
+<module name="m_xline_db.so">
+
+#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
+# ZipLinks module: Adds support for zlib deflate on server to server
+# connections. Both ends of the connection must load this module.
+#
+#<module name="m_ziplink.so">
+#
+# To use this module, you must enable it as a transport type in your
+# <link> tags or <bind> tags using the transport name 'zip'.
+# See the documentation of <link> and <bind>, respectively.
+#
+
+
+#########################################################################
+# #
+# - InspIRCd Development Team - #
+# http://www.inspircd.org #
+# #
+#########################################################################
projects / user / henk / code / inspircd.git / commitdiff