+++ /dev/null
-########################################################################
-# #
-# ___ ___ ____ ____ _ #
-# |_ _|_ __ ___ _ __|_ _| _ \ / ___|__| | #
-# | || '_ \/ __| '_ \| || |_) | | / _` | #
-# | || | | \__ \ |_) | || _ <| |__| (_| | #
-# |___|_| |_|___/ .__/___|_| \_\\____\__,_| #
-# |_| #
-# ____ __ _ _ _ #
-# / ___|___ _ __ / _(_) __ _ _ _ _ __ __ _| |_(_) ___ _ __ #
-# | | / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \ #
-# | |__| (_) | | | | _| | (_| | |_| | | | (_| | |_| | (_) | | | | #
-# \____\___/|_| |_|_| |_|\__, |\__,_|_| \__,_|\__|_|\___/|_| |_| #
-# |___/ #
-# #
-##################################||####################################
- #||#
-##################################||####################################
-# #
-# This is an example of the config file for InspIRCd. #
-# Change the options to suit your network. #
-# #
-# This is a test.conf with semi-sane defaults if you just want #
-# to get a network up and running as quickly as possible or if #
-# you want a quick testnet for something. #
-# It is not extremely secure, but we *STRONGLY* recommend #
-# using inspircd.conf.example and all the other sub-confs #
-# instead. #
-# #
-# This .conf in it's current form is not supported. #
-# Please do not ask for help if something isn't working #
-# as you expected. #
-# For a supported .conf, please use inspircd.conf.example #
-# #
-# $Id: inspircd.conf.example 10648 2008-10-16 18:07:27Z brain $
-# #
-# ____ _ _____ _ _ ____ _ _ _ #
-# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
-# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
-# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
-# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
-# #
-# Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT #
-# lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even #
-# if you've configured InspIRCd before, these probably indicate #
-# something new or different to this version and you SHOULD READ IT. #
-# #
-########################################################################
-# #
-# Unalphabeticalise the modules list at your own risk #
-# #
-########################################################################
-
-#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# This optional tag allows you to include another config file #
-# allowing you to keep your configuration tidy. The configuration #
-# file you include will be treated as part of the configuration file #
-# which includes it, in simple terms the inclusion is transparent. #
-# #
-# All paths to config files are relative to the directory of the main #
-# config file inspircd.conf, unless the filename starts with a forward#
-# slash (/) in which case it is treated as an absolute path. #
-# #
-# You may also include an executable file, in which case if you do so #
-# the output of the executable on the standard output will be added #
-# to your config at the point of the include tag. #
-# #
-# Syntax is as follows: #
-#<include file="file.conf"> #
-#<include executable="/path/to/executable parameters"> #
-# #
-# Executable Include Example: #
-#<include executable="/usr/bin/wget -O - http://mynet.net/inspircd.conf">
-# #
-
-
-#-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#-
-# #
-# Here is where you enter the information about your server. #
-# #
-
-<server
- # name: Hostname of your server. Does not need to be valid.
- name="test.yournet.net"
-
- # description: Server description. Spaces are allowed.
- description="Test IRC Server"
-
- # network: Network name given on connect to clients.
- # Should be the same on all servers on the network and
- # not contain spaces.
- network="TestNet">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Describes the Server Administrator's real name (optionally), #
-# nick, and email address. #
-# #
-
-<admin
- # name: Real Name
- name="NetAdmin"
-
- # nick: Nickname (preferably what you use on the network)
- nick="NetAdmin"
-
- # email: email address. Does not have to be valid
- # but should be for the users to be able to contact you.
- email="admin@localhost">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
-# #
-# Enter the port and address bindings here. #
-# #
-# #
-# ____ _ _____ _ _ ____ _ _ _ #
-# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
-# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
-# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
-# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
-# #
-# If you want to link servers to InspIRCd you must load the #
-# m_spanningtree.so module! Please see the modules list below for #
-# information on how to load this module! If you do not load this #
-# module, server ports will NOT be bound! #
-# #
-# PLEASE NOTE: If you have build InspIRCd with IPv6 support, you MUST #
-# specify a bind address if you want the IRCd to bind to a IPv4 IP. #
-
-#<bind
- # address: IP address to bind to if the box that you are hosting
- # on has more than one IP, else the ircd will try to bind to all
- # IP's on the box if this is not defined
- #address=""
-
- # port: Port for users and/or servers to be able to connect to.
- # you can select multiple ports by separating them
- # with a - character like the example below.
- #port="6697"
-
- # type: Type of bind block this is. It can either be clients or
- # servers. Whichever you select will be the only type able to connect
- # to this bind section.
- #type="clients"
-
- # ssl: If you want this bind section to use SSL, define either
- # gnutls or openssl here. The appropriate SSL modules must be loaded
- # for ssl to work. If you do not want this bind section to support ssl,
- # just remove this option.
- #ssl="gnutls">
-
-<bind address="" port="6660-6669" type="clients">
-
-# When linking servers, the openssl and gnutls transports are largely
-# link-compatible and can be used alongside each other or either/or
-# on each end of the link without any significant issues.
-# Transports can only be used on server blocks.
-# Supported Transports are: "zip", "openssl" and "gnutls".
-# You must load m_ziplinks module for zip, m_ssl_openssl for openssl
-# or m_ssl_gnutls for gnutls.
-
-#<bind address="" port="7000,7001" type="servers">
-#<bind address="1.2.3.4" port="7005" type="servers" transport="openssl">
-
-
-#-#-#-#-#-#-#-#-#-#- DIE/RESTART CONFIGURATION -#-#-#-#-#-#-#-#-#-#-
-# #
-# You can configure the passwords here which you wish to use for #
-# the die and restart commands. Only trusted IRCop's who will #
-# need this ability should know the die and restart password. #
-# #
-
-<power
-
- # diepass: Password for opers to use if they need to shutdown (die)
- # a server.
- diepass="z0mg-die"
-
- # restartpass: Password for opers to use if they need to restart
- # a server.
- restartpass="restart-n0w">
-
-
-#-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# This is where you can configure which connections are allowed #
-# and denied access onto your server. The password is optional. #
-# You may have as many of these as you require. To allow/deny all #
-# connections, use a '*' or 0.0.0.0/0. #
-# #
-
-<connect
- # allow: What IP addresses/hosts to allow for this block.
- allow="*"
-
- # maxchans: Maximum number of channels a user in this class
- # be in at one time. This overrides every other maxchans setting.
- #maxchans="30"
-
- # timeout: How long (in seconds) the server will wait before
- # disconnecting a user if they do not do anything on connect.
- # (Note, this is a client-side thing, if the client does not
- # send /nick, /user or /pass)
- timeout="60"
-
- # flood: After x lines (flood) in x seconds (see threshold)
- # the user is disconnected for flooding.
- flood="20"
-
- # threshold: In how many seconds can a user flood x lines (see flood)
- # before they are disconnected for excess flood.
- threshold="1"
-
- # pingfreq: How often the server tries to ping connecting clients/servers.
- pingfreq="120"
-
- # sendq: Amount of data that the server is allowed to send to the user
- # before they are dropped.
- sendq="262144"
-
- # recvq: amount of data allowed in a clients queue before they are dropped.
- recvq="8192"
-
- # localmax: Maximum local connections per IP.
- localmax="3"
-
- # globalmax: Maximum global (network-wide) connections per IP.
- globalmax="3"
-
- # limit: How many users are allowed in this class
- limit="5000"
-
- # modes: Usermodes that are set on users in this block on connect.
- # Enabling this option requires that the m_conn_umodes module be loaded.
- # This entry is highly recommended to use for/with IP Cloaking/masking.
- modes="+x">
-
-<connect
- # deny: Will not let people connect if they have specified host/IP.
- deny="69.254.*">
-<connect deny="3ffe::0/32">
-
-#-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
-# #
-# CIDR configuration allows detection of clones and applying of #
-# throttle limits across a CIDR range. (A CIDR range is a group of #
-# IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be #
-# represented as 192.168.1.0/24). This means that abuse across an ISP #
-# is detected and curtailed much easier. #
-# #
-
-<cidr
- # ipv4clone: specifies how many bits of an IP address should be
- # looked at for clones. The default only looks for clones on a
- # single IP address of a user. You do not want to set this
- # extremely low. (Values are 0-32).
- ipv4clone="32"
-
- # ipv6clone: specifies how many bits of an IP address should be
- # looked at for clones. The default only looks for clones on a
- # single IP address of a user. You do not want to set this
- # extremely low. (Values are 0-128).
- ipv6clone="128">
-
-#-#-#-#-#-#-#-#-#-#-#-#- CLASS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-
-# #
-# Classes are a group of commands which are grouped together and #
-# given a unique name. They're used to define which commands #
-# are available to certain types of Operators. #
-# #
-# #
-# Note: It is possible to make a class which covers all available #
-# commands. To do this, specify commands="*". This is not really #
-# recommended, as it negates the whole purpose of the class system, #
-# however it is provided for fast configuration (e.g. in test nets) #
-# #
-
-<class
- name="Shutdown"
-
- # commands: oper commands that users of this class can run.
- commands="DIE RESTART REHASH LOADMODULE UNLOADMODULE RELOAD"
-
- # usermodes: Oper-only usermodes that opers with this class can use.
- usermodes="*"
-
- # chanmodes: Oper-only channel modes that opers with this class can use.
- chanmodes="*">
-
-<class name="ServerLink" commands="CONNECT SQUIT RCONNECT MKPASSWD MKSHA256 ALLTIME SAJOIN SAMODE SANICK SAPART SAQUIT" usermodes="*" chanmodes="*">
-<class name="BanControl" commands="KILL GLINE KLINE ZLINE QLINE ELINE TBAN TLINE USERIPCBAN CHECK CLOSE CLONES GLOBOPS JUMPSERVER SHUN LOCKSERV UNLOCKSERV NICKLOCK NICKUNLOCK" usermodes="*" chanmodes="*">
-<class name="OperChat" commands="WALLOPS GLOBOPS SETIDLE SPYLIST SPYNAMES TRACE TAXONOMY" usermodes="*" chanmodes="*">
-<class name="HostCloak" commands="SETHOST SETIDENT SETNAME CHGHOST CHGIDENT CHGNAME SETIDLE SWHOIS" usermodes="*" chanmodes="*">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#- OPERATOR COMPOSITION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# This is where you specify which types of operators you have on #
-# your server, as well as the commands they are allowed to use. #
-# This works alongside with the classes specified above. #
-# #
-
-<type
- # name: Name of type. Used in actual olines below.
- # Cannot contain spaces. If you would like a space, use
- # the _ character instead and it will translate to a space on whois.
- name="NetAdmin"
-
- # classes: classes (above blocks) that this type belongs to.
- classes="OperChat BanControl HostCloak Shutdown ServerLink"
-
- # host: host oper gets on oper-up. This is optional.
- host="netadmin.yournet.net"
-
- # modes: usermodes besides +o that are set on a oper of this type
- # when they oper up. Used for snomasks and other things.
- # Requires that m_opermodes.so be loaded.
- modes="+s +cCqQ"
- override="*">
-
-<type name="GlobalOp" classes="OperChat BanControl HostCloak ServerLink" host="ircop.omega.org.za">
-<type name="Helper" classes="HostCloak" host="helper.omega.org.za">
-
-
-#-#-#-#-#-#-#-#-#-#-#- OPERATOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# Opers are defined here. This is a very important section. #
-# Remember to only make operators out of trust worthy people. #
-# #
-
-# oline with plain-text password
-<oper
- # name: oper login that is used to oper up (/oper name password).
- # Remember: This is case sensitive
- name="admin"
-
- # password: case-sensitive, unhashed...yea...self-explanatory.
- password="s3cret"
-
- # host: What hostnames/IP's are allowed to oper up with this oline.
- # Multiple options can be separated by spaces and CIDR's are allowed.
- host="*@*"
-
- # ** ADVANCED ** This option is disabled by default.
- # fingerprint: When using the m_oper_ssl_cert module, you may specify
- # a key fingerprint here. This can be obtained by using the
- # /fingerprint command while the module is loaded. This enhances
- # security by verifying that the person opering up has the matching
- # key/certificate combination. This enhances security a great deal.
- # If m_oper_ssl and/or m_ssl_gnutls/m_ssl_openssl aren't loaded,
- # this option will be ignored.
- #fingerprint="67:CB:9D:C0:13:24:8A:82:9B:B2:17:1E:D1:1B:EC:D4"
-
- # type: What oper type this oline is. See the block above for list
- # of types. NOTE: This is case-sensitive as well.
- type="NetAdmin">
-
-# oline with hashed password. It is highly recommended to use hashed passwords.
-#<oper
- # name: oper login that is used to oper up (/oper name password).
- # Remember: This is case sensitive
- #name="Brain"
-
- # hash: what hash this password is hashed with. requires the module
- # for selected hash (m_md5.so, m_sha256.so or m_ripemd160) be
- # loaded and the oper password hashing module (m_password_hash.so)
- # loaded. Options here are: "md5", "sha256" and "ripemd160".
- #hash="sha256"
-
- # password: a hash of your password (see above option) hashed
- # with /mkpasswd *hash* *password* . See m_password_hash in modules.conf
- # for more information about password hashing.
- #password="1ec1c26b50d5d3c58d9583181af8076655fe00756bf7285940ba3670f99fcba0"
-
- # host: What hostnames/IP's are allowed to oper up with this oline.
- # Multiple options can be separated by spaces and CIDR's are allowed.
- #host="ident@dialup15.isp.com *@localhost *@server.com *@3ffe::0/16"
-
- # type: What oper type this oline is. See the block above for list
- # of types. NOTE: This is case-sensitive as well.
- #type="NetAdmin">
-
-
-#-#-#-#-#-#-#-#-#-#-#- SERVER LINK CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-# #
-# Defines which servers can link to this one, and which servers this #
-# server may create outbound links to. #
-# #
-# If you would like more detailed options, but a slightly more #
-# painful configuration, please see inspircd.conf.example.old #
-# #
-# ____ _ _____ _ _ ____ _ _ _ #
-# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
-# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
-# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
-# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
-# #
-# If you want to link servers to InspIRCd you must load the #
-# m_spanningtree.so module! Please see the modules list below for #
-# information on how to load this module! If you do not load this #
-# module, server links will NOT work! #
-# #
-# Also, if you define any transports, you must load the modules for #
-# these transports BEFORE you load m_spanningtree, e.g. place them #
-# above it in the configuration file. Currently this means the three #
-# modules m_ssl_gnutls, m_ziplinks and m_ssl_openssl, depending on #
-# which you choose to use. #
-# #
-
-#<link name="hub.penguin.org"
-
- # ipaddr: The IP address of the remote server.
- # Can also be a hostname, but hostname must resolve.
- #ipaddr="penguin.box.com"
-
- # port: the port to connect to this server on
- #port="7000"
-
- # allowmask: Range of IP addresses to allow for this link.
- # Can be a CIDR (see example).
- #allowmask="69.58.44.0/24"
-
- # autoconnect: Time to wait to attempt to autoconnect
- # to remote server (in seconds).
- #autoconnect="300"
-
- # failover: If defined, if this link fails,
- # what is the next link that is tried.
- #failover="hub.other.net"
-
- # timeout: If defined, this option defines how long the server
- # will wait to consider the connect attempt failed and try the
- # failover (see above).
- #timeout="15"
-
- # transport: If defined, this states extra modules that can be
- # used in the connection. Options are: "openssl" and "gnutls"
- # for encryption (they are compatible with each other) and
- # "zip" for compression. You must use the same (or a compa-
- # tible) transport on both sides of the link.
- #transport="gnutls"
-
- # bind: Local IP address to bind to.
- #bind="1.2.3.4"
-
- # statshidden: defines if IP is shown to opers when
- # /stats c is invoked.
- #statshidden="no"
-
- # hidden: If this is set to yes, this server and it's "child"
- # servers will not be shown when users do a /map or /links
- #hidden="no"
-
- # passwords: the passwords we send and recieve.
- # The remote server will have these passwords reversed.
- #sendpass="outgoing!password"
- #recvpass="incoming!password">
-
-# A duplicate of the first link block without comments
-# if you like copying & pasting.
-#<link name="hub.penguin.org"
- #ipaddr="penguin.box.com"
- #port="7000"
- #allowmask="69.58.44.0/24"
- #autoconnect="300"
- #failover="hub.other.net"
- #timeout="15"
- #transport="gnutls"
- #bind="1.2.3.4"
- #statshidden="no"
- #hidden="no"
- #sendpass="outgoing!password"
- #recvpass="incoming!password">
-
-# Link block for services. Options are the same as for the first
-# link block (depending on what your services package supports).
-#<link name="services.antarctic.com"
- #ipaddr="localhost"
- #port="7000"
- #allowmask="127.0.0.0/8"
- #sendpass="penguins"
- #recvpass="polarbears">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#- ULINES CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-# This tag defines a ulined server. A U-Lined server has special #
-# permissions, and should be used with caution. Services servers are #
-# usually u-lined in this manner. #
-# #
-# The 'silent' value, if set to yes, indicates that this server should#
-# not generate quit and connect notices, which can cut down on noise #
-# to opers on the network. #
-# #
-#<uline server="services.antarctic.com" silent="yes">
-
-#-#-#-#-#-#-#-#-#-#- MISCELLANEOUS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-# #
-
-<files
- # motd: Path to your motd file. Path is relative to the conf directory.
- motd="inspircd.motd.example"
-
- # rules: Path to your rules file. Path is relative to the conf directory.
- rules="inspircd.rules.example">
-
-#-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-
-<channels
- # users: Maximum number of channels a user can be in at once.
- users="20"
-
- # opers: Maximum number of channels a oper can be in at once.
- opers="60">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# If these values are not defined, InspIRCd uses the default DNS resolver
-# of your system.
-
-#<dns
- # server: DNS server to use to attempt to resolve IP's to hostnames.
- #server="127.0.0.1"
-
- # timeout: seconds to wait to try to resolve DNS/hostname.
- #timeout="5">
-
-# An example of using an IPv6 nameserver
-#<dns server="::1" timeout="5">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Define the path to the PID file here. The PID file can be used to #
-# rehash the ircd from the shell or to terminate the ircd from the #
-# shell using shell scripts, perl scripts, etc... and to monitor the #
-# ircd's state via cron jobs. If this is a relative path, it will be #
-# relative to the configuration directory, and if it is not defined, #
-# the default of 'inspircd.pid' is used. #
-# #
-
-#<pid file="/path/to/inspircd.pid">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Use these tags to customise the ban limits on a per channel basis. #
-# The tags are read from top to bottom, and any tag found which #
-# matches the channels name applies the banlimit to that channel. #
-# It is advisable to put an entry with the channel as '*' at the #
-# bottom of the list. If none are specified or no maxbans tag is #
-# matched, the banlist size defaults to 64 entries. #
-# #
-
-<banlist chan="*" limit="69">
-
-#-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# This tag is optional, and specifies one or more features which are #
-# not available to non-operators. #
-# #
-# For example you may wish to disable NICK and prevent non-opers from #
-# changing their nicknames. #
-# Note that any disabled commands take effect only after the user has #
-# 'registered' (e.g. after the initial USER/NICK/PASS on connection) #
-# so for example disabling NICK will not cripple your network. #
-# #
-# `fakenonexistant' will make the ircd pretend that nonexistant #
-# commands simply don't exist to non-opers ("no such command"). #
-# #
-#<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Settings to define which features are usable on your server. #
-# #
-
-<options
- # prefixquit: What (if anything) a users' quit message
- # should be prefixed with.
- prefixquit="Quit: "
-
- # suffixquit: What (if anything) a users' quit message
- # should be suffixed with.
- suffixquit=""
-
- # prefixpart: What (if anything) a users' part message
- # should be prefixed with.
- prefixpart="\""
-
- # suffixpart: What (if anything) a users' part message
- # should be suffixed with.
- suffixpart="\""
-
- # noservices: With this set to no, when a user joins a empty channel,
- # the server will set +q on them. If set to yes, it will only set +o
- # on them until they register the channel.
- noservices="no"
-
- # qprefix: Prefix (symbol) to use for +q users.
- qprefix="~"
-
- # aprefix: Prefix (symbol) to use for +a users.
- aprefix="&"
-
- # deprotectself: If this value is set (true, yes or 1), it will allow
- # +a and +q users to remove the +a and +q from themselves, otherwise,
- # the status will have to be removed by services.
- deprotectself="yes"
-
- # deprotectothers: If this value is set to yes, true, or 1, then any
- # user with +q or +a may remove the +q or +a from other users.
- # The default setting is to not enable this feature, so that
- # only +q may remove +a, and nothing but services may remove +q.
- deprotectothers="no"
-
- # syntaxhints: If enabled, if a user fails to send the correct parameters
- # for a command, the ircd will give back soome help text of what
- # the correct parameters are
- syntaxhints="yes"
-
- # cyclehosts: If enabled, when a user gets a host set, it will cycle
- # them in all their channels. If not, it will simply change their host
- # without cycling them.
- cyclehosts="no"
-
- # ircumsgprefix: Use undernet-style message prefixing for NOTICE and
- # PRIVMSG. If enabled, it will add users' prefix to the line, if not,
- # it will just message the user.
- ircumsgprefix="no"
-
- # announcets: If set to yes, when the TS on a channel changes, all users
- # in channel will be sent a NOTICE about it.
- announcets="yes"
-
- # hostintopic: If enabled, channels will show the host of the topicsetter
- # in the topic.
- hostintopic="no"
-
- # pingwarning: If a server does not respond to a ping within x seconds,
- # it will send a notice to opers with snomask +l informing that the server
- # is about to ping timeout.
- pingwarning="15"
-
- # serverpingfreq: How often pings are sent between servers (in seconds).
- serverpingfreq="60"
-
- # allowhalfop: Allows the use of +h channelmode (halfops).
- allowhalfop="yes"
-
- # defaultmodes: What modes are set on a empty channel when a user
- # joins it and it is unregistered. This is similar to Asuka's
- # autochanmodes.
- defaultmodes="nt"
-
- # moronbanner: This is the text that is sent to a user when they are
- # banned from the server.
- moronbanner="You're banned! Email haha@abuse.com with the ERROR line below for help."
-
- # exemptchanops: Defines what channel modes channel operators are
- # exempt from. Supported modes are +SfFgNc. Defaults to off.
- exemptchanops=""
-
- # invitebypassmodes: This allows /invite to bypass other channel modes.
- # (Such as +k, +j, +l, etc)
- invitebypassmodes="yes">
-
-
-#-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
-# #
-
-<performance
- # netbuffersize: Size of the buffer used to recieve data from clients.
- # The ircd may only read this amount of text in 1 go at any time.
- netbuffersize="10240"
-
- # maxwho: Maximum number of results to show in a /who query.
- # It is not recommended to set this above 1024.
- maxwho="128"
-
- # somaxconn: The maximum number of connections that may be waiting
- # in the accept queue. This is *NOT* the total maximum number of
- # connections per server. Some systems may only allow this to be up
- # to 5, while others (such as linux and *BSD) default to 128.
- somaxconn="128"
-
- # softlimit: This optional feature allows a defined softlimit for
- # connections. If defined, it sets a soft max connections value.
- # must be lower than ./configure maxclients.
- softlimit="12800"
-
- # quietbursts: When syncing or splitting from a network, a server
- # can generate a lof ot connect and quit messages to opers with
- # +C and +Q snomasks. Setting this to yes squelches those messages,
- # which makes it easier for opers, but degrades the functionality of
- # bots like BOPM during netsplits.
- quietbursts="yes"
-
- # nouserdns: If enabled, no user DNS lookups will be performed on
- # connecting users. This can save a lot of resources on very busy servers.
- nouserdns="no">
-
-#-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
-# #
-
-<security
-
- # announceinvites: If this option is set, then invites are announced
- # to the channel when a user invites another user. If you consider
- # this to be unnecessary noise, set this to 'none'.
- # To announce to all ops, set this to 'ops' and to announce to all users,
- # set the value to 'all'. The value 'dynamic' will make the messages
- # go to every user who has power of INVITE on the channel. This
- # is the recommended setting.
- announceinvites="dynamic"
-
- # hidemodes: If enabled, then the listmodes given will be hidden
- # from users below halfop. This is not recommended to be set on +b
- # as it may break some functionality in popular clients such as mIRC.
- hidemodes="eI"
-
- # disablehmac: If you are linking your InspIRCd to versions older
- # than 1.1.6 (NOT RECOMMENDED), then you can specify this option and
- # set it to yes. 1.1.6 and above support HMAC and challenge-response
- # for password authentication. These can greatly enhance security of your
- # server-to-server connections when you are not using SSL.
- # It is highly recommended to keep this set to no.
- disablehmac="no"
-
- # hideulines: If this value is set to yes, U-lined server will
- # be hidden from non-opers in /links and /map.
- hideulines="no"
-
- # flatlinks: If this value is set to yes, /map and /links will
- # be flattened when shown to non-opers.
- flatlinks="no"
-
- # hidewhois: When defined, the given text will be used in place
- # of the server a user is on when whoised by a non-oper. Most
- # networks will want to set this to something like "*.netname.net"
- # to conceal the actual server a user is on.
- hidewhois=""
-
- # hidebans: If this value is set to yes, when a user is banned ([gkz]lined)
- # only opers will see the ban message when the user is removed
- # from the server..
- hidebans="no"
-
- # hidekills: If defined, replaces who set a /kill with a custom string.
- hidekills=""
-
- # hidesplits: If enabled, non-opers will not be able to see which
- # servers split in a netsplit, they will only be able to see that one
- # occurred (If their client has netsplit detection).
- hidesplits="no"
-
- # maxtargets: Maximum number of targets per command.
- # (Commands like /notice, /privmsg, /kick, etc)
- maxtargets="20"
-
- # customversion: Displays a custom string when a user /version's
- # the ircd. This may be set for security reasons or vanity reasons.
- customversion=""
-
- # operspywhois: If this is set, when a oper /whois 's a user,
- # it will show all channels the user is in including +s and +p
- # channels.
- operspywhois="yes"
-
- # userstats: /stats commands that users can run (oeprs can run all).
- userstats="Pu">
-
-#-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
-# #
-# This configuration tag defines the maximum sizes of various types #
-# on IRC, such as the maximum length of a channel name, and the #
-# maximum length of a channel. Note that with the exception of the #
-# identmax value all values given here are the exact values you would #
-# expect to see on IRC. This contrasts with the older InspIRCd #
-# releases where these values would be one character shorter than #
-# defined to account for a null terminator on the end of the text. #
-# #
-# These values should match network-wide otherwise issues will occur. #
-
-<limits
- # maxnick: Maximum length of a nickname.
- maxnick="31"
-
- # maxchan: Maximum length of a channel name.
- maxchan="64"
-
- # maxmodes: Maximum number of mode changes per line.
- maxmodes="20"
-
- # maxident: Maximum length of a ident/username.
- maxident="11"
-
- # maxquit: Maximum length of a quit message.
- maxquit="255"
-
- # maxtopic: Maximum length of a channel topic.
- maxtopic="307"
-
- # maxkick: Maximum length of a kick message.
- maxkick="255"
-
- # maxgecos: Maximum length of a GECOS (realname).
- maxgecos="128"
-
- # maxaway: Maximum length of an away messahe.
- maxaway="200">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Logging
-# -------
-#
-# Logging is covered with the <log> tag, which you may use to change
-# the behaviour of the logging of the IRCd.
-#
-# In InspIRCd as of 1.2, logging is pluggable and very extensible.
-# Different files can log the same thing, different 'types' of log can
-# go to different places, and modules can even extend the log tag
-# to do what they want.
-#
-# An example log tag would be:
-# <log method="file" type="OPER" level="default" target="opers.log">
-# which would log all information on /oper (failed and successful) to
-# a file called opers.log.
-#
-# There are many different types which may be used, and modules may
-# generate their own. A list of useful types:
-# - USERS - information relating to user connection and disconnection
-# - CHANNELS - information relating to joining and parting of channels.
-# XXX someone doc more on this
-#
-# You may also log *everything* by using a type of *, and subtract things out
-# of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
-#
-# The following log tag is highly default and uncustomised. It is recommended you
-# sort out your own log tags. This is just here so you get some output.
-
-<log method="file" type="* -USERINPUT -USEROUTPUT -m_spanningtree" level="default" target="ircd.log">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#- WHOWAS OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# This tag lets you define the behaviour of the /whowas command of #
-# your server. #
-# #
-
-<whowas
- # groupsize: Maximum entries per nick shown when performing
- # a /whowas nick.
- groupsize="10"
-
- # maxgroups: Maximum number of nickgroups that can be added to
- # the list so that /whowas does not use a lot of resources on
- # large networks.
- maxgroups="100000"
-
- # maxkeep: Maximum time a nick is kept in the whowas list
- # before being pruned. Time may be specified in seconds,
- # or in the following format: 1y2w3d4h5m6s. Minimum is
- # 1 hour.
- maxkeep="3d">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#- BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# The ban tags define nick masks, host masks and ip ranges which are #
-# banned from your server. All details in these tags are local to #
-# Your server. #
-# #
-
-<badip
- # ipmask: IP range to ban. Wildcards and CIDR can be used.
- ipmask="69.69.69.69"
-
- # reason: Reason to display when user is disconnected.
- reason="No porn here thanks.">
-
-<badnick
- # nick: Nick to disallow. Wildcards are supported.
- nick="ChanServ"
-
- # reason: Reason to display on /nick.
- reason="Reserved For Services">
-<badnick nick="NickServ" reason="Reserved For Services">
-<badnick nick="OperServ" reason="Reserved For Services">
-<badnick nick="MemoServ" reason="Reserved For Services">
-
-<badhost
- # host: ident@hostname to ban.
- # Wildcards and CIDR (if you specify an IP) can be used.
- host="*@hundredz.n.hundredz.o.1337.kiddies.com"
-
- # reason: Reason to display when user is disconnected
- reason="Too many 1337 kiddiots">
-<badhost host="*@localhost" reason="No irc from localhost!">
-<badhost host="*@172.32.0.0/16" reason="This subnet is bad.">
-
-# exception: Hosts that are exempt from [kgz]lines.
-<exception
- # host: ident@hostname to exempt.
- # Wildcards and CIDR (if you specify an IP) can be used.
- host="*@ircop.host.com"
-
- # reason: Reason for exception. Only shown in /stats e
- reason="Opers hostname">
-
-#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# This optional tag allows you to specify how wide a gline, eline, #
-# kline, zline or qline can be before it is forbidden from being #
-# set. By setting hostmasks="yes", you can allow all G, K, E lines, #
-# no matter how many users the ban would cover. This is not #
-# recommended! By setting ipmasks="yes", you can allow all Z lines, #
-# no matter how many users these cover too. Needless to say we #
-# don't recommend you do this, or, set nickmasks="yes", which will #
-# allow any qline. #
-# #
-
-<insane
- # hostmasks: Allow bans with insane hostmasks (over-reaching bans)
- hostmasks="no"
-
- # ipmasks: Allow bans with insane ipmasks (over-reaching bans)
- ipmasks="no"
-
- # nickmasks: Allow bans with insane nickmasks (over-reaching bans)
- nickmasks="no"
-
- # trigger: What percentage of users on the network to trigger
- # specifying an insane ban as. The default is 95.5%, which means
- # if you have a 1000 user network, a ban will not be allowed if it
- # will be banning 955 or more users.
- trigger="95.5">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# ____ _ _____ _ _ ____ _ _ _ #
-# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
-# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
-# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
-# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
-# #
-# Well done, you've reached the end of the basic configuration, your #
-# ircd should now start if you want to try it out! (./inspircd start) #
-# #
-# We now suggest you read and edit modules.conf, as modules are what #
-# provide almost all the features of InspIRCd. :) #
-# #
-# The default does nothing -- we include it for simplicity for you. #
-#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# These tags define which modules will be loaded on startup by your #
-# server. Add modules without any paths. When you make your ircd #
-# using the 'make' command, all compiled modules will be moved into #
-# the folder you specified when you ran ./configure. The module tag #
-# automatically looks for modules in this location. #
-# If you attempt to load a module outside of this location, either #
-# in the config, or via /LOADMODULE, you will receive an error. #
-# #
-# By default, ALL modules are commented out. You must uncomment them #
-# or add lines to your config to load modules. Please refer to #
-# http://www.inspircd.org/wiki/Modules_List for a list of modules and#
-# each modules link for any additional conf tags they require. #
-# #
-# You may use wildcards in a <module> tag to load all modules which #
-# match a glob pattern (e.g. m_sa????.so would load m_sajoin, #
-# m_sapart, m_saquit and m_sanick) #
-# #
-# ____ _ _____ _ _ ____ _ _ _ #
-# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
-# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
-# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
-# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
-# #
-# To link servers to InspIRCd, you MUST load the m_spanningtree #
-# module, as shown below. If you DO NOT do this, server links will #
-# NOT work at all. ie. The ports will NOT bind, and /connect will not #
-# work properly. This is by design, to allow for the implementation #
-# of other linking protocols in modules in the future. #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Spanning Tree module - allows linking of servers using the spanning
-# tree protocol (see the READ THIS BIT section above).
-# You will almost always want to load this.
-#
-<module name="m_spanningtree.so">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# MD5 Module - Allows other modules to generate MD5 hashes, usually for
-# cryptographic uses and security.
-#
-# IMPORTANT:
-# Other modules such as m_cloaking.so and m_password_hash.so may rely on
-# this module being loaded to function.
-#
-<module name="m_md5.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SHA256 Module - Allows other modules to generate SHA256 hashes,
-# usually for cryptographic uses and security.
-#
-# IMPORTANT:
-# Other modules such as m_password_hash.so may rely on this module being
-# loaded to function. Certain modules such as m_spanningtree.so will
-# function without this module but when it is loaded their features will
-# be enhanced (for example the addition of HMAC authentication).
-#
-<module name="m_sha256.so">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# RIPEMD160 Module - Allows other modules to generate RIPEMD160 hashes,
-# usually for cryptographic uses and security.
-#
-# IMPORTANT:
-# Other modules may rely on this module being loaded to function.
-<module name="m_ripemd160.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Abbreviation module: Provides the ability to abbreviate commands a-la
-# BBC BASIC keywords.
-<module name="m_abbreviation.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Alias module: Allows you to define server-side command aliases
-#<module name="m_alias.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you have the m_alias.so module loaded, you may also define #
-# aliases as shown below. They are commonly used to provide shortcut #
-# commands to services, however they are not limited to just this use.#
-# An alias tag requires the following values to be defined in it: #
-# #
-# text - The text to detect as the actual command line, #
-# Cant contain spaces, but case insensitive. #
-# You may have multiple aliases with the same #
-# command name (text="" value), however the first #
-# found will be executed if its format value is #
-# matched, or it has no format value. Aliases are #
-# read from the top of the file to the bottom. #
-# #
-# format - If this is defined, the parameters of the alias #
-# must match this glob pattern. For example if you #
-# want the first parameter to start with a # for #
-# the alias to be executed, set format="#*" in the #
-# alias definition. Note that the :'s which are #
-# part of IRC formatted lines will be preserved #
-# for matching of this text. This value is #
-# optional. #
-# #
-# replace - The text to replace 'text' with. Usually this #
-# will be "PRIVMSG ServiceName :$2-" or similar. #
-# You may use the variables $1 through $9 in the #
-# replace string, which refer to the first through #
-# ninth word in the original string typed by the #
-# user. You may also use $1- through $9- which #
-# refer to the first word onwards, through to the #
-# ninth word onwards, e.g. if the user types the #
-# command "foo bar baz qux quz" then $3- will hold #
-# "baz qux quz" and $2 will contain "bar". You may #
-# also use the special variables: $nick, $ident, #
-# $host and $vhost, and you may separate multiple #
-# commands with \n. If you wish to use the ACTUAL #
-# characters \ and n together in a line, you must #
-# use the sequence "\\n". #
-# #
-# requires - If you provide a value for 'requires' this means #
-# the given nickname MUST be online for the alias #
-# to successfully trigger. If they are not, then #
-# the user receives a 'no such nick' 401 numeric. #
-# #
-# uline - Defining this value with 'yes', 'true' or '1' #
-# will ensure that the user given in 'requires' #
-# must also be on a u-lined server, as well as #
-# actually being on the network. If the user is #
-# online, but not on a u-lined server, then an #
-# oper-alert is sent out as this is possibly signs #
-# of a user trying to impersonate a service. #
-# #
-# operonly - Defining this value, with a value of 'yes', '1' #
-# or true will make the alias oper only. If a non- #
-# oper attempts to use the alias, it will appear #
-# to not exist. #
-# #
-#<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-#<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-#<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-#<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-#<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-#
-# An example of using the format value to create an alias with two
-# different behaviours depending on the format of the parameters.
-#
-#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
-# requires="ChanServ" uline="yes">
-#
-#<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
-# requires="NickServ" uline="yes">
-#
-# This alias fixes a glitch in xchat 2.6.x and above and the way it
-# assumes IDENTIFY must be prefixed by a colon (:) character. It should
-# be placed ABOVE the default NICKSERV alias (the first example) listed
-# above.
-#
-#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
-# requires="NickServ" uline="yes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Allowinvite module: Gives channel mode +A to allow all users to use
-# /invite, and extban A to deny invite from specific masks
-<module name="m_allowinvite.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Alltime module: Shows time on all connected servers at once.
-# This module is oper-only and provides /alltime.
-# To use, ALLTIME must be in one of your oper class blocks.
-<module name="m_alltime.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Antibear security module: Prevents 'bear.txt' based trojans from
-# connecting to your network by sending them a numeric they can't handle.
-<module name="m_antibear.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Antibottler module: Labels bottler leech bots
-<module name="m_antibottler.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Auditorium module: Adds channel mode +u which makes everyone else
-# except you in the channel invisible, used for large meetings etc.
-<module name="m_auditorium.so">
-#
-# Auditorium settings:
-#
-<auditorium showops="no" operoverride="no">
-#
-# showops:
-# Setting this value to yes makes m_auditorium behave like unrealircd
-# +u channel mode, e.g. ops see users joining, parting, etc, and users
-# joining the channel see the ops. Without this flag, the mode acts
-# like ircnet's +a (anonymous channels), showing only the user in the
-# names list, and not even showing the ops in the list, or showing the
-# ops that the user has joined.
-# operoverride:
-# Setting this value to yes makes m_auditorium affect the userlist for
-# regular users only. Opers will view all users in the channel normally.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban except module: Adds support for channel ban exceptions (+e)
-<module name="m_banexception.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban redirection module: Allows bans which redirect to a specified
-# channel. e.g. +b nick!ident@host#channelbanneduserissentto
-<module name="m_banredirect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block amsg module: Attempt to block all usage of /amsg and /ame
-<module name="m_blockamsg.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you have the m_blockamsg.so module loaded, you can configure it #
-# with the <blockamsg> tag: #
-# #
-# delay - How many seconds between two messages to force #
-# them to be recognised as unrelated. #
-# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
-# or 'killopers'. Define how to take action when #
-# a user uses /amsg or /ame. #
-#
-<blockamsg delay="3" action="killopers">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block CAPS module: Blocking all-CAPS messages with cmode +B
-<module name="m_blockcaps.so">
-# #
-#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# percent - How many percent of text must be caps before text #
-# will be blocked. #
-# #
-# minlen - The minimum length a line must be for the block #
-# percent to have any effect. #
-# #
-# capsmap - A list of chars to be considered CAPS, this was #
-# you can add CAPS for your language. Also you can #
-# add things like ! and space to further lock down #
-# on caps usage. #
-<blockcaps percent="50"
- minlen="5"
- capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block colour module: Blocking colour-coded messages with cmode +c
-<module name="m_blockcolor.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Botmode module: Adds the user mode +B
-<module name="m_botmode.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CallerID module: Adds usermode +g which activates hybrid-style
-# callerid (== block all private messages unless you /accept first)
-<module name="m_callerid.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# maxaccepts - Maximum number of entires a user can add to his #
-# /accept list. Default is 16 entries. #
-# operoverride - Can opers (note: ALL opers) ignore callerid mode? #
-# Default is no. #
-# tracknick - Preserve /accept entries when a user changes nick? #
-# If no (the default), the user is removed from #
-# everyone's accept list if he changes nickname. #
-# cooldown - Amount of time (in seconds) that must pass since #
-# the last notification sent to a user before he can #
-# be sent another. Default is 60 (1 minute). #
-<callerid maxaccepts="16"
- operoverride="no"
- tracknick="no"
- cooldown="60">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CAP module: Provides the CAP negotiation mechanism seen in
-# ratbox-derived ircds
-<module name="m_cap.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CBAN module: Lets you disallow channels from being used at runtime.
-# This module is oper-only and provides /cban.
-# To use, CBAN must be in one of your oper class blocks.
-<module name="m_cban.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Censor module: Adds the channel mode +G
-#<module name="m_censor.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify to use the m_censor module, then you must #
-# specify some censor tags. See also: #
-# http://www.inspircd.org/wiki/Censor_Module #
-#
-#<include file="censor.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-#<module name="m_cgiirc.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# Optional - If you specify to use m_cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: http://www.inspircd.org/wiki/CGI-IRC_Module
-#
-# Set to yes if you want to notice opers when CGI clients connect
-# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="pass" mask="www.mysite.com"> # Get IP from PASS
-# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
-# <cgihost type="passfirst" mask="www.mysite.com"> # See the docs
-# New style:
-# <cgihost type="webirc" pass="foobar"
-# mask="somebox.mysite.com"> # Get IP from WEBIRC
-#
-# IMPORTANT NOTE:
-# ---------------
-#
-# When you connect CGI:IRC clients, there are two connect classes which
-# apply to these clients. When the client initially connects, the connect
-# class which matches the cgi:irc site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
-# real IP is then checked. You may set this class to a lower value, so that
-# the real IP of the client can still be restricted to, for example, 3
-# sessions maximum.
-#
-
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel create module: Adds snomask +j, which will notify opers of
-# any new channels that are created.
-# This module is oper-only.
-<module name="m_chancreate.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel filter module: Allows channel-op defined message
-# filtering using simple string matches (channel mode +g)
-<module name="m_chanfilter.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel logging module: used to send snotice output to channels, to
-# allow staff to centrally monitor and discuss network activity.
-#
-# The "channel" field is where you want the messages to go, "snomasks"
-# is what snomasks you want to be sent to that channel. Multiple tags
-# are allowed.
-#<module name="m_chanlog.so">
-#<chanlog snomasks="AOcC" channel="#opers">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channelban: Implements extended ban j:, which stops anyone in already
-# in a channel matching a mask like +b j:#channel*mask from joining.
-<module name="m_channelban.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Chanprotect module: gives +q and +a channel modes
-<module name="m_chanprotect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Check module: gives /check
-# Check is useful for looking up information on channels,
-# users, IP addresses and hosts.
-# This module is oper-only.
-# To use, CHECK must be in one of your oper class blocks.
-<module name="m_check.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CHGHOST module: Adds the /CHGHOST command
-# This module is oper-only.
-# To use, CHGHOST must be in one of your oper class blocks.
-<module name="m_chghost.so">
-#
-#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
-# Optional - If you want to use special chars for hostnames you can #
-# specify your own custom list of chars with the <hostname> tag: #
-# #
-# charmap - A list of chars accepted as valid by the /CHGHOST #
-# and /SETHOST commands. Also note that the list is #
-# case-sensitive. #
-<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CHGIDENT module: Adds the /CHGIDENT command
-# This module is oper-only.
-# To use, CHGIDENT must be in one of your oper class blocks.
-<module name="m_chgident.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CHGNAME module: Adds the /CHGNAME command
-# This module is oper-only.
-# To use, CHGNAME must be in one of your oper class blocks.
-<module name="m_chgname.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Cloaking module: Adds usermode +x and cloaking support.
-# Relies on the module m_md5.so being loaded before m_cloaking.so in
-# the configuration file.
-# To use, you should enable m_conn_umodes and add +x as
-# an enabled mode. See the m_conn_umodes module for more information.
-<module name="m_cloaking.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify the m_cloaking.so module as above, you #
-# must define cloak keys, and optionally a cloak prefix as shown #
-# below. When using cloaking, the cloak keys are MANDITORY and must #
-# be included. However, if prefix is not included, it will default #
-# to your networks name from the <server> tag. You can also include #
-# the following optional values: #
-# #
-# ipalways - Always cloak the IP address, not the hostname, #
-# which doesn't reveal the user's ISP, but #
-# results in hosts that are harder to read and #
-# ban. #
-# #
-# lowercase - Display the cloaked hostnames in lowercase #
-# characters instead of uppercase #
-# #
- <cloak key1="0x2AF39F40"
- key2="0x78E10B32"
- key3="0x4F2D2E82"
- key4="0x043A4C81"
- prefix="mynet"
- ipalways="false"
- lowercase="false">
-# #
-# Please note that the key values will accept any number, and should #
-# be large numbers. Using small numbers such as "7" or "1924" will #
-# seriously weaken the security of your cloak. It is recommended you #
-# use hexdecimal numbers prefixed by "0x", as shown in this example, #
-# with each key eight hex digits long. #
-
-#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Close module: Allows an oper to close all unregistered connections.
-# This module is oper-only and provides /close.
-# To use, CLOSE must be in one of your oper class blocks.
-<module name="m_close.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Clones module: Adds an oper command /CLONES for detecting cloned
-# users. Warning: This module may be resource intensive when its
-# command is issued, use with care.
-# This module is oper-only.
-# To use, CLONES must be in one of your oper class blocks.
-<module name="m_clones.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Common channels module: Adds user mode +c, which, when set, requires
-# that users must share a common channel with you to PRIVMSG or NOTICE
-# you.
-<module name="m_commonchans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Join: Allows you to force users to join one or more channels
-# automatically upon connecting to the server.
-#<module name="m_conn_join.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#
-# If you have m_conn_join.so loaded, you can configure it using the
-# follow values:
-#
-#<autojoin channel="#one,#two,#three">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Usermodes: Set modes on users when they connect
-# When this module is loaded <connect:allow> tags may have an optional
-# modes="" value, which contains modes to add or remove from users
-# when they connect to the server.
-<module name="m_conn_umodes.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Conn-Wait-for-Pong: Don't let a user connect until they PONG
-#<module name="m_conn_waitpong.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you have the m_conn_waitpong.so module loaded, configure it with #
-# the <waitpong> tag: #
-# #
-# sendsnotice - Whether to send a snotice on connect, like other #
-# older ircds #
-# #
-# killonbadreply - Whether to kill the user if they send the wrong #
-# PONG reply. #
-# #
-#<waitpong sendsnotice="yes" killonbadreply="yes">
-
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel cycle module. Server side /hop, with +ilk etc bypass.
-<module name="m_cycle.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connectban: Provides IP connection throttling. Any IP range that connects
-# too many times (configurable) in an hour is zlined for a (configurable)
-# duration, and their count resets to 0.
-#
-# ipv4cidr and ipv6cidr allow you to turn the comparison from individual
-# IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling
-# over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
-#
-#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
-# This allows for 10 quits in an hour with a 10 minute ban if that is exceeded.
-#
-#<module name="m_connectban.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connection throttle module. Configuration:
-#<module name="m_connflood.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# seconds, maxconns - Amount of connections per <seconds>.
-#
-# timeout - Time to wait after the throttle was activated
-# before deactivating it. Be aware that the time
-# is seconds + timeout.
-#
-# quitmsg - The message that users get if they attempt to
-# connect while the throttle is active.
-#
-# bootwait - Amount of time to wait before enforcing the
-# throttling when the server just booted.
-#
-#<connflood seconds="30" maxconns="3" timeout="30"
-# quitmsg="Throttled" bootwait="10">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Custom title module: Adds the /TITLE command which allows for trusted
-# users to gain a custom whois line and a optional
-# vhost can be specified.
-#<module name="m_customtitle.so">
-#
-#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-# name - The username used to identify
-# password - The password used to identify
-# host - Allowed hostmask [optional]
-# title - Title shown in whois
-# vhost - Displayed host [optional]
-#
-#<title name="foo" password="bar" title="Official Chat Helper">
-#<title name="bar" password="foo" host="ident@host.name" title="Official Chat Helper" vhost="helper.network.chat">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# DCCALLOW module: Adds the /DCCALLOW command
-<module name="m_dccallow.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# blockchat - Whether to block DCC CHAT as well as DCC SEND
-# length - Default duration of entries in DCCALLOW list
-# action - Default action to take if no action is specified
-# can be 'block' or 'allow'
-#
-# File configuration:
-# pattern - The glob pattern to match against
-# action - Action to take if a user attempts to send a file
-# that matches this pattern, can be 'block' or 'allow'
-#
-#<dccallow blockchat="yes" length="5m" action="block">
-#<banfile pattern="*.exe" action="block">
-#<banfile pattern="*.txt" action="allow">
-#
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Deaf module: adds support for ircu style usermode +d - deaf to
-# channel messages and channel notices.
-<module name="m_deaf.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Delay join module: Adds the channel mode +D which delays all JOIN
-# messages from users until they speak. If they quit or part before
-# speaking, their quit or part message will not be shown to the channel
-# which helps cut down noise on large channels in a more friendly way
-# than the auditorium mode. Only channel ops may set the +D mode.
-<module name="m_delayjoin.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Deny Channels: Deny Channels from being used by users
-<module name="m_denychans.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you have the m_denychans.so module loaded, you need to specify #
-# the channels to deny: #
-# #
-# name - The channel name to deny. (glob masks are ok) #
-# #
-# allowopers - If operators are allowed to override the deny. #
-# #
-# reason - Reason given for the deny. #
-# #
-# redirect - Redirect the user to a different channel #
-# #
-#<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> #
-#<badchan name="#heaven" redirect="#hell" reason="Nice try!"> #
-# #
-# Redirects will not work if the target channel is set +L. #
-# #
-# Additionally, you may specify channels which are allowed, even if #
-# a badchan tag specifies it would be denied: #
-#<goodchan name="#godsleeps"> #
-# Glob masks are accepted here also.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Devoice Module: Let users devoice themselves.
-<module name="m_devoice.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# DNS Blacklist Module: Provides support for looking up IPs on one or #
-# more blacklists. #
-#<module name="m_dnsbl.so"> #
-# #
-# For configuration options please see the wiki page for m_dnsbl at #
-# http://inspircd.org/wiki/DNS_Blacklist_Module #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Filter module: Provides message filtering, similar to SPAMFILTER.
-#<module name="m_filter.so">
-# #
-# This module depends upon a regex provider such as m_regex_pcre or #
-# m_regex_glob to function. You must specify which of these you want #
-# m_filter to use via the tag below. #
-# #
-# Valid engines are: #
-# #
-# glob - Glob patterns, provided via m_regex_glob.so #
-# pcre - PCRE regexps, provided via m_regex_pcre.so, needs libpcre #
-# tre - TRE regexps, provided via m_regex_tre.so, requires libtre #
-# posix - POSIX regexps, provided via m_regex_posix.so, not availale #
-# on windows, no dependencies on other operating systems. #
-# #
-#<filteropts engine="glob"> #
-# #
-# Your choice of regex engine must match on all servers network-wide.
-#
-#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify to use the m_filter module, then #
-# specfiy below the path to the filter.conf file, or define some #
-# <filter> tags. #
-# #
-#<include file="filter.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Foobar module: does nothing - historical relic
-#<module name="m_foobar.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Gecosban: Implements extended ban r:, which stops anyone matching
-# a mask like +b r:*realname?here* from joining a channel.
-<module name="m_gecosban.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GeoIP module: Allows the server admin to ban users by country code.
-#<module name="m_geoip.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-# GEOIP CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# <geoip banunknown="false"> #
-# #
-# Set this value to true or yes to block unknown IP ranges which are #
-# not in the database (usually LAN addresses, localhost, etc) #
-# #
-# <geoban country="TR" reason="This country not permitted"> #
-# #
-# Use one or more of these tags to ban countries by country code. #
-# The country code must be in capitals and should be an ISO country #
-# code such as TR, GB, or US. #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Globops module: gives /GLOBOPS and SNOMASK +g
-# This module is oper-only.
-# To use, GLOBOPS must be in one of your oper class blocks.
-<module name="m_globops.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Global load module: Allows loading and unloading of modules network-
-# wide (USE WITH EXTREME CAUTION!)
-# This module is oper-only and provides /gloadmodule, /gunloadmodule
-# and /greloadmodule.
-# To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE
-# must be in one of your oper class blocks.
-#<module name="m_globalload.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HELPOP module: Provides the /HELPOP command
-#<module name="m_helpop.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify to use the m_helpop.so module, then #
-# specify below the path to the helpop.conf file, or if you like to #
-# make a mess, define your helpop tags in this conf. #
-# #
-#<include file="helpop.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HIDECHANS module: Allows opers to hide their channels list from non-
-# opers by setting user mode +I on themselves.
-<module name="m_hidechans.so">
-#
-# HIDECHANS can optionally prevent opers from seeing channels on a +I
-# user, for more privacy if set to true.
-# This setting is not recommended for most mainstream networks.
-<hidechans affectsopers="false">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HIDEOPER module: Allows opers to hide their oper status from non-
-# opers by setting user mode +H on themselves.
-# This module is oper-only.
-<module name="m_hideoper.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Hostchange module: Allows a different style of cloaking
-#<module name="m_hostchange.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you choose to use the m_hostchange.so module. #
-# Config Help - See http://www.inspircd.org/wiki/Host_Changer_Module #
-# #
-#<host suffix="polarbears.org" separator="." prefix="">
-#<hostchange mask="*@fbi.gov" action="addnick">
-#<hostchange mask="*r00t@*" action="suffix">
-#<hostchange mask="a@b.com" action="set" value="blah.blah.blah">
-#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# httpd module: Provides http server support for InspIRCd
-#<module name="m_httpd.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#
-# Optional - If you choose to use the m_httpd.so module, then you must
-# specify the port number and other details of your http server:
-#
-#<http ip="192.168.1.10" host="brainwave" port="32006"
-# index="/home/brain/inspircd/http/index.html">
-#
-# You may have as many of these tags as you wish, each with a different
-# IP, port, host or index file. Each one will act as an independent
-# HTTP server.
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# http ACL module: Provides access control lists for m_httpd dependent
-# modules. Use this module to restrict pages by IP address and by
-# password.
-#
-#<module name="m_httpd_acl.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#
-# Restrict access to the m_httpd_stats module to all but the local
-# network and when the correct password is specified:
-#
-# <httpdacl path="/stats*" types="password,whitelist"
-# username="secretstuff" password="mypasshere" whitelist="127.0.0.*,10.*">
-#
-# Deny all connections to all but the main index page:
-#
-# <httpdacl path="/*" types="blacklist" blacklist="*">
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# http config module: Allows the server's configuration to be viewed
-# over HTTP. Requires m_httpd.so to be loaded for it to function.
-#<module name="m_httpd_config.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# http stats module: Provides basic stats pages over HTTP
-# Requires m_httpd.so to be loaded for it to function.
-#<module name="m_httpd_stats.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- HTTPD STATS CONFIGURATION -#-#-#-#-#-#-#-#-#-#
-#
-#<httpstats stylesheet="http://remote.style/sheet.css">
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ident: Provides RFC 1413 ident lookup support
-# When this module is loaded <connect:allow> tags may have an optional
-# useident="yes|no" boolean value, determining whether or not to lookup
-# ident on users matching that connect tag.
-<module name="m_ident.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you are using the m_ident.so module, then you can #
-# specify the timeout for ident lookups here. If not defined, it will #
-# default to one second. This is a non-blocking timeout which holds #
-# the user in a 'connecting' state until the lookup is complete. #
-# The bind value indicates which IP to bind outbound requests to. #
-# #
-<ident timeout="5" bind="">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Invite except module: Adds support for channel invite exceptions (+I)
-<module name="m_inviteexception.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Invisible module - Adds support for usermode +Q (quiet) which lets an
-# oper go 'invisible' similar to unrealircd 3.1's +I mode. Note that
-# opers are still able to see invisible users, and if an oper with +Q
-# deopers, they will become visible.
-#
-# IMPORTANT NOTE: To allow this mode to be used by a type of oper, you
-# must first add the value canquiet="yes" to that oper's type tag.
-#
-# This module is oper-only.
-#
-<module name="m_invisible.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Join flood module: Adds support for join flood protection (+j)
-<module name="m_joinflood.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Jump Server module: Adds support for the RPL_REDIR numeric
-# This module is oper-only.
-# To use, JUMPSERVER must be in one of your oper class blocks.
-<module name="m_jumpserver.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Anti-Auto-Rejoin: Adds support for prevention of auto-rejoin (+J)
-<module name="m_kicknorejoin.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Knock module: adds the /KNOCK command and +K channel mode
-<module name="m_knock.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# LDAP authentication module: Adds the ability to authenticate users #
-# via LDAP. This is an extra module which must be enabled explicitly #
-# by symlinking it from modules/extra, and requires the OpenLDAP libs #
-# #
-#<module name="m_ldapauth.so"> #
-# #
-# Configuration: #
-# #
-# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" #
-# attribute="uid" #
-# server="ldap://brainwave.brainbox.cc" #
-# allowpattern="Guest*" #
-# killreason="Access denied" #
-# searchscope="subtree" #
-# binddn="cn=Manager,dc=brainbox,dc=cc" #
-# bindauth="mysecretpass" #
-# verbose="yes"> #
-# #
-# The baserdn indicates the base DN to search in for users. Usually #
-# this is 'ou=People,dc=yourdomain,dc=yourtld'. #
-# #
-# The attribute value indicates the attribute which is used to locate #
-# a user account by name. On POSIX systems this is usually 'uid'. #
-# #
-# The server parameter indicates the LDAP server to connect to. The #
-# ldap:// style scheme before the hostname proper is MANDITORY. #
-# #
-# The allowpattern value allows you to specify a wildcard mask which #
-# will always be allowed to connect regardless of if they have an #
-# account, for example guest users. #
-# #
-# Killreason indicates the QUIT reason to give to users if they fail #
-# to authenticate. #
-# #
-# The searchscope value indicates the subtree to search under. On our #
-# test system this is 'subtree'. Your mileage may vary. #
-# #
-# Setting the verbose value causes an oper notice to be sent out for #
-# every failed authentication to the server, with an error string. #
-# #
-# The binddn and bindauth indicate the DN to bind to for searching, #
-# and the password for the distinguished name. Some LDAP servers will #
-# allow anonymous searching in which case these two values do not #
-# need defining, otherwise they should be set similar to the examples #
-# above. #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that is #
-# used to temporarily close/open for new connections to the server. #
-# These commands require OPER status and that the LOCKSERV UNLOCKSERV #
-# are specified in a <class> tag that the oper is part of. This is so #
-# you can control who has access to this possible dangerous command. #
-# If your server is locked and you got disconnected, do a REHASH from #
-# shell to open up again.
-#
-# This module is oper-only.
-#
-<module name="m_lockserv.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Msg flood module: Adds message/notice flood protection (+f)
-<module name="m_messageflood.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# MsSQL module: Allows other SQL modules to access MS SQL Server
-# through a unified API. You must copy the source for this module
-# from the directory src/modules/extra, plus the file m_sqlv2.h
-#<module name="m_mssql.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_mssql.so is more complex than described here, see wiki for more #
-# info http://www.inspircd.org/wiki/SQLServer_Service_Provider_Module #
-#
-#<database name="db" username="user" password="pass" hostname="localhost" id="db1">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# MySQL module: Allows other SQL modules to access MySQL databases
-# through a unified API. You must copy the source for this module
-# from the directory src/modules/extra, plus the file m_sqlv2.h
-#<module name="m_mysql.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_mysql.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
-#
-#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database2">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# NAMESX module: Provides support for the NAMESX extension which allows
-# clients to see all the prefixes set on a user without getting confused.
-# This is supported by mIRC, x-chat, klient, and maybe more.
-<module name="m_namesx.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Nickchange flood protection module: Allows up to X nick changes in Y seconds.
-# Provides channel mode +F.
-<module name="m_nickflood.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Nicklock module: Let opers change a user's nick and then stop that
-# user from changing their nick again.
-# This module is oper-only.
-# To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks.
-<module name="m_nicklock.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No ctcp module: Adds the channel mode +C to block CTCPs
-<module name="m_noctcp.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No kicks module: Adds the +Q channel mode
-<module name="m_nokicks.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No nicks module: Adds the +N channel mode, as well as the +b N:
-# extended bantype. +N stops all users from changing their nick,
-# the +b N: extban stops anyone from matching a +b N:nick!user@host
-# mask from changing their nick.
-<module name="m_nonicks.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No Notice module: adds the channel mode +T
-<module name="m_nonotice.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper channels mode: Adds the +O channel mode
-# This module is oper-only.
-<module name="m_operchans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper flood module: Removes flood limits from users upon opering up
-# This module is oper-only.
-<module name="m_operflood.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper invex/extban module: Adds +beI type O, to ban, exempt, and invex
-# given oper type masks.
-# e.g, /mode #channel +iI O:* is equivilant to chmode +O, but you
-# may also, e.g. /mode #channel +iI O:AdminTypeOnly to only allow admins.
-# +be work in a similar fashion.
-# This module is oper-only.
-#
-<module name="m_operinvex.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper Join module: Auto-joins opers to a channel upon oper-up
-# This module is oper-only. For the user equivalent, see m_conn_join.
-<module name="m_operjoin.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you are using the m_operjoin.so module, specify options here: #
-# #
-# channel - The channel name to join, can also be a comma #
-# seperated list eg. "#channel1,#channel2". #
-# #
-# override - Lets the oper join walking thru any modes that #
-# might be set, even bans. Use "yes" or "no". #
-# #
-<operjoin channel="#opers" override="no">
-#
-# Alternatively you can use the autojoin="channellist" in a <type> #
-# tag to set specific autojoins for a type of oper, for example: #
-#
-#<type name="Helper" autojoin="#help" classes="...">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper log module: Logs all oper commands to the ircd log at default
-# loglevel.
-# This module is oper-only.
-<module name="m_operlog.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MOTD module: Provides support for seperate message of the day
-# on oper-up
-# This module is oper-only.
-#<module name="m_opermotd.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# If you are using the m_opermotd.so module, specify the motd here #
-# #
-#<opermotd file="oper.motd">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Override module: Adds support for oper override
-# This module is oper-only.
-<module name="m_override.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_override.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/Oper_Override_Module #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper levels module: Gives each oper a level and prevents
-# actions being taken against higher level opers
-# Specify the level as the 'level' parameter of the <type> tag
-# # This module is oper-only.
-#<module name="m_operlevels.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper modes module: Allows you to specify modes to add/remove on oper
-# Specify the modes as the 'modes' parameter of the <type> tag
-# and/or as the 'modes' parameter of the <oper> tag.
-# This module is oper-only. For the user equivalent, see m_conn_umodes
-<module name="m_opermodes.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper password hash module: Allows hashed oper passwords
-# Relies on the module m_md5.so and/or m_sha256.so being loaded before
-# m_password_hash.so in the configuration file.
-# This module is oper-only.
-<module name="m_password_hash.so">
-#
-#-#-#-#-#-#-#-#-#-#-# OPER HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# To use this module, you must define a hash type for each oper's
-# password you want to hash. For example:
-#
-# <oper name="Brain"
-# host="ident@dialup15.isp.com"
-# hash="sha256"
-# password="a41d730937a53b79f788c0ab13e9e1d5"
-# type="NetAdmin">
-#
-# The types of hashing available vary depending on which hashing modules
-# you load, but usually if you load m_sha256.so and m_md5.so, both md5
-# and sha256 type hashing will be available (the most secure of which
-# is SHA256).
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Permanent Channels module: Channels with the permanent channels mode
-# will remain open even after everyone else has left the channel, and
-# therefore keep things like modes, ban lists and topic. Permanent
-# channels -may- need support from your Services package to function
-# properly with them. This adds channel mode +P.
-# This module is oper-only.
-<module name="m_permchannels.so">
-#
-# You may also create channels on startup by using the <permchannels> block.
-#<permchannels channel="#opers" modes="is" topic="Opers only.">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# PostgreSQL module: Allows other SQL modules to access PgSQL databases
-# through a unified API. You must copy the source for this module
-# from the directory src/modules/extra, plus the file m_sqlv2.h
-#<module name="m_pgsql.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_pgsql.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQL_Service_Provider_Module #
-#
-#<database name="mydb" username="myuser" password="mypass" hostname="localhost" id="my_database" ssl="no">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Muteban: Implements extended ban m:, which stops anyone matching
-# a mask like +b m:nick!user@host from speaking on channel.
-<module name="m_muteban.so">
-#
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Random Quote module: provides a random quote on connect.
-# NOTE: Some of these may mimic fatal errors and confuse users and
-# opers alike! - BEWARE!
-#<module name="m_randquote.so">
-#
-#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-# #
-# Optional - If you specify to use the m_randquote.so module, then #
-# specify below the path to the randquotes.conf file. #
-# #
-#<randquote file="randquotes.conf">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Redirect module: Adds channel redirection (mode +L)
-<module name="m_redirect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular Expression Provider for Glob or wildcard (?/*) matching.
-# You must have at least 1 provider loaded to use m_filter or m_rline
-# modules. This module has no additional requirements, as it uses the
-# matching already present in InspIRCd core.
-#<module name="m_regex_glob.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular Expression Provider for PCRE (Perl-Compatible Regular
-# Expressions). You need libpcre installed to compile and load this
-# module. You must have at least 1 provider loaded to use m_filter or
-# m_rline.
-#<module name="m_regex_pcre.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular Expression Provider for POSIX Regular Expressions.
-# You shouldn't need any additional libraries on a POSIX-compatible
-# system (ie: any Linux, BSD, but not Windows). You must have at least
-# 1 provider loaded to use m_filter or m_rline.
-# On POSIX-compliant systems, regex syntax can be found by using the
-# command: 'man 7 regex'.
-#<module name="m_regex_posix.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular Expression Provider for TRE Regular Expressions.
-# This is the same regular expression engine used by UnrealIRCd, so
-# if you are most familiar with the syntax of /spamfilter from there,
-# this is the provider you want. You need libtre installed in order
-# to compile and load this module.
-#<module name="m_regex_tre.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Registered users only channel creation
-# Allows only registered users and opers to create new channels.
-#<module name="m_regonlycreate.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Remove module: Adds the /REMOVE command which is a peaceful
-# alternative to /KICK
-<module name="m_remove.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict banned users module:
-# Disallows banned users on a channel from messaging the channel,
-# changing nick, or changing the topic, if loaded.
-<module name="m_restrictbanned.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restricted channels module: Allows only opers to create channels
-#<module name="m_restrictchans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Restrict message module: Allows users to only message opers
-#<module name="m_restrictmsg.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban users through regular expression patterns
-#<module name="m_rline.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# If you wish to re-check a user when they change nickname (can be
-# useful under some situations, but *can* also use CPU with more users
-# on a server) then set the following configuration value:
-# Also, this is where you set what Regular Expression engine is to be
-# used. If you ever change it while running, all of your R-Lines will be
-# wiped. This is the regex engine used by all R-Lines set, and
-# m_regex_<engine>.so must be loaded, or rline will be nonfunctional
-# until you load it or change the engine to one that is loaded.
-#
-#<rline matchonnickchange="yes" engine="pcre">
-#
-# Generally, you will NOT want to use 'glob' here, as this turns
-# rline into just another gline. The exceptions are that rline will
-# always use the full nick!user@host realname string, rather than only
-# user@host, but beware that only the ? and * wildcards are available,
-# and are the only way to specify where the space can occur if you do
-# use glob. For this reason, is recommended to use a real regex engine
-# so that at least \s or [[:space:]] is available.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# JSON-RPC module: Encode and decode JSON-RPC requests for modules
-#<module name="m_rpc_json.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# RPC test module: A test of the RPC API
-#<module name="m_rpctest.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Provide /LIST throttling (to prevent flooding) and /LIST safety to
-# prevent excess flood when the list is large.
-#<module name="m_safelist.so">
-#
-#-#-#-#-#-#-#-#-#-#-# SAFELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# When using Safelist, you may set the following values;
-#
-# The first value, 'throttle', sets the amount of time in seconds a user
-# must wait between LIST commands. For example, if this is set to 60
-# (the default) then the user may not /LIST more than once a minute.
-# If not defined, the default value is 60 seconds.
-#
-# The second value, 'maxlisters', indicates the maximum number of users
-# which may be retrieving a LIST at once. It is not recommended you raise
-# this value, as increasing it too high can make your network vulnerable
-# to floodbots which waste your bandwidth and CPU time with LIST requests.
-#
-#<safelist throttle="60" maxlisters="50">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAJOIN module: Adds the /SAJOIN command
-# This module is oper-only.
-# To use, SAJOIN must be in one of your oper class blocks.
-<module name="m_sajoin.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAMODE module: Adds the oper /SAMODE command
-# This module is oper-only.
-# To use, SAMODE must be in one of your oper class blocks.
-<module name="m_samode.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SANICK module: Allows opers to change user's nicks
-# This module is oper-only.
-# To use, SANICK must be in one of your oper class blocks.
-<module name="m_sanick.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAPART module: Adds the oper /SAPART command
-# This module is oper-only.
-# To use, SAPART must be in one of your oper class blocks.
-<module name="m_sapart.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SAQUIT module: Adds the oper /SAQUIT command (abusable!!!)
-# This module is oper-only.
-# To use, SAQUIT must be in one of your oper class blocks.
-<module name="m_saquit.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SASL authentication module: Provides support for IRC Authentication
-# Layer (aka: atheme SASL) via AUTHENTICATE.
-<module name="m_sasl.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Secure list module: Prevent /LIST in the first minute of connection,
-# crippling most spambots and trojan spreader bots.
-<module name="m_securelist.so">
-#
-#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# Securelist can be harmful to some irc search engines such as #
-# netsplit.de and searchirc.com. To prevent securelist blocking these #
-# sites from listing, define exception tags as shown below: #
-<securehost exception="*@*.searchirc.org">
-<securehost exception="*@*.netsplit.de">
-<securehost exception="*@echo940.server4you.de">
-# #
-# Define the following variable to change how long a user must wait #
-# before issuing a LIST. If not defined, defaults to 60 seconds. #
-# #
-<securelist waittime="30">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Servprotect module: Provides support for Austhex style +k /
-# UnrealIRCD +S services mode
-#<module name="m_servprotect.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# See nicks module: Allow for SNOMASK +N which shows nick changes.
-# This module is oper-only.
-<module name="m_seenicks.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Set Idle module: Adds a command for opers to change their
-# idle time (mainly a toy)
-# This module is oper-only.
-# To use, SETIDLE must be in one of your oper class blocks.
-<module name="m_setidle.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Services support module: Adds several usermodes such as +R and +M
-# this module implements the 'identified' state via user mode +r, which
-# is similar to the DALnet and dreamforge systems.
-#
-# N O T E!!
-# >> This CAN NOT be used at the same time as m_services_account <<
-# N O T E!!
-# *** This module DOES NOT support Atheme services, please use ***
-# *** m_services_account if you are planning on using Atheme. ***
-#<module name="m_services.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Services support module: Adds several usermodes such as +R and +M
-# this module implements the 'identified' state via account names (AC)
-# and is similar in operation to the way asuka and ircu handle services.
-#
-# Also of note is that this module implements two extbans:
-# +b R: (stop matching account names from joining)
-# +b M: (stop matching account names from speaking)
-#
-# N O T E!!
-# >> This CAN NOT be used at the same time as m_services <<
-# N O T E!!
-#<module name="m_services_account.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Sethost module: Adds the /SETHOST command
-# This module is oper-only.
-# To use, SETHOST must be in one of your oper class blocks.
-# See m_chghost for how to customise valid chars for hostnames
-<module name="m_sethost.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Setident module: Adds the /SETIDENT command
-# This module is oper-only.
-# To use, SETIDENT must be in one of your oper class blocks.
-<module name="m_setident.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SETNAME module: Adds the /SETNAME command
-# This module is oper-only.
-# To use, SETNAME must be in one of your oper class blocks.
-<module name="m_setname.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Serverban: Implements extended ban s:, which stops anyone connected
-# to a server matching a mask like +b s:server.mask.here from joining.
-<module name="m_serverban.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Show Whois module: Adds the +W usermode which allows opers
-# to see when they are whois'ed (can be annoying).
-# This module is oper-only.
-<module name="m_showwhois.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Shun module: Provides the /shun command, which stops a user executing
-# most commands.
-# This module is oper-only.
-# To use, SHUN must be in one of your oper class blocks.
-<module name="m_shun.so">
-#
-# You may also configure which commands you wish a user to be able to
-# perform. It should be noted that if a shunned user issues QUIT or PART
-# then their message will be removed, as if they did not issue one.
-#
-# You may also (optionally) let the user know that their command was blocked.
-#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Spy module: Provides the ability to see the complete names list of
-# channels an oper is not a member of
-# This module is oper-only.
-<module name="m_spy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL channel mode module: Adds support for SSL-only channels (+z).
-# does not do anything useful without a working SSL module (see below)
-#<module name="m_sslmodes.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Dummy ssl module: If you have other servers on your network which
-# have SSL, but your server does not have ssl enabled, you should load
-# this module, which will handle SSL metadata (e.g. the "Is using ssl"
-# field in the WHOIS information).
-#<module name="m_ssl_dummy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
-#<module name="m_ssl_gnutls.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_ssl_gnutls.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/GnuTLS_SSL_Module #
-# #
-# NOTE: If you want to use this module to encrypt and sign your #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file! #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Info module: Allows users to retrieve information about other
-# user's peer SSL certificates and keys. This can be used by client
-# scripts to validate users. For this to work, one of m_ssl_gnutls.so
-# or m_ssl_openssl.so must be loaded. You must symlink the source for
-# this module from the directory src/modules/extra.
-#<module name="m_sslinfo.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
-#<module name="m_ssl_openssl.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_ssl_openssl.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/OpenSSL_SSL_Module #
-# #
-# NOTE: If you want to use this module to encrypt and sign your #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file! #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Cert Oper module: Allows opers to oper up using the key fingerprint
-# stored within their SSL certificate and key pair.
-# When using this module, one of m_ssl_gnutls.so or m_ssl_openssl.so must
-# be loaded. An extra value should be added to enabled opers, which
-# is in the following format: fingerprint="<hash>". For more information,
-# see the example in the oper blocks.
-# This module is oper-only.
-#<module name="m_ssl_oper_cert.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Strip colour module: Adds the channel mode +S
-<module name="m_stripcolor.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SILENCE module: Adds support for /SILENCE
-<module name="m_silence.so">
-#
-# Configuration tags:
-#
-<silence maxentries="32">
-#
-# Sets the maximum number of entries on a users silence list.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQLite3 module: Allows other SQL modules to access SQLite3 #
-# databases through a unified API. You must link the source for this #
-# module from the directory src/modules/extra to src/modules, plus #
-# the file m_sqlv2.h #
-#<module name="m_sqlite3.so">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_sqlite.so is more complex than described here, see the wiki for #
-# more: http://www.inspircd.org/wiki/SQLite3_Service_Provider_Module #
-#
-#<database hostname="/full/path/to/database.db" id="anytext">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQLutils module: Provides some utilities to SQL client modules, such
-# as mapping queries to users and channels. You must copy the source
-# for this module from the directory src/modules/extra/m_sqlutils.cpp
-# and src/modules/extra/m_sqlutils.h into /src/modules
-# Needed for, and loaded before: SQLauth and SQLoper
-#<module name="m_sqlutils.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL authentication module: Allows IRCd connections to be tied into
-# a database table (for example a forum). You must copy the source for
-# this module from the directory src/modules/extra
-# Depends on the SQLutils module being loaded first.
-#<module name="m_sqlauth.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# m_sqlauth.so is too complex it describe here, see the wiki: #
-# http://www.inspircd.org/wiki/SQL_Authentication_Module #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL logging module: Allows you to log network-wide data for your
-# network in a fully normalised set of SQL tables. You must copy the
-# source for this module from the directory src/modules/extra
-#<module name="m_sqllog.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- SQLLOG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# dbid - Database ID to use (see m_sql) #
-# #
-# See also: http://www.inspircd.org/wiki/SQL_Logging_Module #
-# #
-#<sqllog dbid="1">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SQL oper module: Allows you to store oper credentials in an SQL table
-# You must copy the source for this module from the directory src/modules/extra
-# Depends on the SQLutils module being loaded first.
-#<module name="m_sqloper.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# dbid - Database ID to use (see m_sql) #
-# hash - Hashing provider to use for password hashing #
-# #
-# See also: http://www.inspircd.org/wiki/SQL_Oper_Storage_Module #
-# #
-#<sqloper dbid="1" hash="md5">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
-# added/removed by Services. #
-#<module name="m_svshold.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SWHOIS module: Allows you to add arbitary lines to user WHOIS.
-# This module is oper-only.
-# To use, SWHOIS must be in one of your oper class blocks.
-<module name="m_swhois.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Taxonomy module: Adds the /TAXONOMY command, used to view all
-# metadata attached to a user.
-# This module is oper-only.
-# To use, TAXONOMY must be in one of your oper class blocks.
-<module name="m_taxonomy.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test command module: Does nothing significant. Read: pointless.
-#<module name="m_testcommand.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Timed bans module: Adds timed bans and the /TBAN command
-# This module is oper-only.
-# To use, TBAN must be in one of your oper class blocks.
-<module name="m_timedbans.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Test line module: Adds the /TLINE command, used to test how many
-# users a /GLINE or /ZLINE etc would match.
-# This module is oper-only.
-# To use, TLINE must be in one of your oper class blocks.
-<module name="m_tline.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# UHNAMES support module: Adds support for the IRCX style UHNAMES
-# extension, which displays ident and hostname in the names list for
-# each user, saving clients from doing a WHO on the channel. Note that
-# this module is not widely supported yet. If a client does not support
-# UHNAMES it will not enable it, this will not break incompatible
-# clients.
-<module name="m_uhnames.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Uninvite module: Adds the /UNINVITE command which lets users remove
-# pending invites from channels without waiting for the user to join.
-<module name="m_uninvite.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Userip module: Adds the /USERIP command
-# This module is oper-only.
-# To use, USERIP must be in one of your oper class blocks.
-<module name="m_userip.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Vhost module: Adds the VHOST command which allows for adding virtual
-# hosts which are accessible using a username and password in the config.
-#<module name="m_vhost.so">
-#
-#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-# #
-# user - Username for the vhost. #
-# #
-# pass - Password for the vhost. #
-# #
-# host - Vhost to set. #
-#
-#<vhost user="some_username" pass="some_password" host="some.host">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Watch module: Adds the WATCH command, which is used by clients to
-# maintain notify lists.
-<module name="m_watch.so">
-#
-# Configuration tags:
-#
-<watch maxentries="32">
-#
-# Sets the maximum number of entries on a user's watch list.
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
-# in a file "xline.db" which can be re-loaded on restart. This is useful
-# for two reasons: it keeps bans so users may not evade them, and on
-# bigger networks, server connections will take less time as there will
-# be a lot less bans to apply - as most of them will already be there.
-<module name="m_xline_db.so">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# ZipLinks module: Adds support for zlib deflate on server to server
-# connections. Both ends of the connection must load this module.
-#
-#<module name="m_ziplink.so">
-#
-# To use this module, you must enable it as a transport type in your
-# <link> tags or <bind> tags using the transport name 'zip'.
-# See the documentation of <link> and <bind>, respectively.
-#
-
-
-#########################################################################
-# #
-# - InspIRCd Development Team - #
-# http://www.inspircd.org #
-# #
-#########################################################################
projects / user / henk / code / inspircd.git / commitdiff