# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
-# To link servers to InspIRCd, you MUST load the m_spanningtree #
-# module. If you don't do this, server links will NOT work at all. #
+# To link servers to InspIRCd, you MUST load the spanningtree module. #
+# If you don't do this, server links will NOT work at all. #
# This is by design, to allow for the implementation of other linking #
# protocols in modules in the future. This module is at the bottom of #
# this file. #
# cryptographic uses and security.
#
# IMPORTANT:
-# Other modules such as m_cloaking.so and m_password_hash.so may rely on
+# Other modules such as cloaking and password_hash may rely on
# this module being loaded to function.
#
-#<module name="m_md5.so">
+#<module name="md5">
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SHA256 module: Allows other modules to generate SHA256 hashes,
# usually for cryptographic uses and security.
#
# IMPORTANT:
-# Other modules such as m_password_hash.so may rely on this module being
-# loaded to function. Certain modules such as m_spanningtree.so will
+# Other modules such as password_hash may rely on this module being
+# loaded to function. Certain modules such as spanningtree will
# function without this module but when it is loaded their features will
# be enhanced (for example the addition of HMAC authentication).
#
-#<module name="m_sha256.so">
+#<module name="sha256">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# RIPEMD160 module: Allows other modules to generate RIPEMD160 hashes,
# usually for cryptographic uses and security.
#
# IMPORTANT:
# Other modules may rely on this module being loaded to function.
-#<module name="m_ripemd160.so">
+#<module name="ripemd160">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Abbreviation module: Provides the ability to abbreviate commands a-la
# BBC BASIC keywords.
-#<module name="m_abbreviation.so">
+#<module name="abbreviation">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alias module: Allows you to define server-side command aliases.
-#<module name="m_alias.so">
+#<module name="alias">
#
# Set the 'prefix' for in-channel aliases (fantasy commands) to the
# specified character. If not set, the default is "!".
#
#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# If you have the m_alias.so module loaded, you may also define #
-# aliases as shown below. They are commonly used to provide shortcut #
-# commands to services, however they are not limited to just this use.#
+# If you have the alias module loaded, you may also define aliases as #
+# shown below. They are commonly used to provide shortcut commands to #
+# services, however they are not limited to just this use. #
# An alias tag requires the following values to be defined in it: #
# #
# text - The text to detect as the actual command line. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Allowinvite module: Gives channel mode +A to allow all users to use
# /INVITE, and extban A to deny invite from specific masks.
-#<module name="m_allowinvite.so">
+#<module name="allowinvite">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alltime module: Shows time on all connected servers at once.
# This module is oper-only and provides /ALLTIME.
# To use, ALLTIME must be in one of your oper class blocks.
-#<module name="m_alltime.so">
+#<module name="alltime">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auditorium module: Adds channel mode +u which makes everyone else
# except you in the channel invisible, used for large meetings etc.
-#<module name="m_auditorium.so">
+#<module name="auditorium">
#
# Auditorium settings:
#
# Another useful combination is with SSL client certificate
# fingerprints: +w h:z:72db600734bb9546c1bdd02377bc21d2a9690d48 will
# give halfop to the user(s) having the given certificate.
-#<module name="m_autoop.so">
+#<module name="autoop">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban except module: Adds support for channel ban exceptions (+e).
-#<module name="m_banexception.so">
+#<module name="banexception">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ban redirection module: Allows bans which redirect to a specified
# channel. e.g. +b nick!ident@host#channelbanneduserissentto
-#<module name="m_banredirect.so">
+#<module name="banredirect">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# bcrypt module: Allows other modules to generate bcrypt hashes,
# usually for cryptographic uses and security.
-#<module name="m_bcrypt.so">
+#<module name="bcrypt">
#
# rounds: Defines how many rounds the bcrypt function will run when
# generating new hashes.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block amsg module: Attempt to block all usage of /amsg and /ame.
-#<module name="m_blockamsg.so">
+#<module name="blockamsg">
#
#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you have the m_blockamsg.so module loaded, you can configure it #
-# with the <blockamsg> tag: #
+# If you have the blockamsg module loaded, you can configure it with #
+# the <blockamsg> tag: #
# #
# delay - How many seconds between two messages to force #
# them to be recognised as unrelated. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block CAPS module: Adds channel mode +B, blocks all-CAPS messages.
-#<module name="m_blockcaps.so">
+#<module name="blockcaps">
#
#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Block color module: Blocking color-coded messages with chan mode +c.
-#<module name="m_blockcolor.so">
+#<module name="blockcolor">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Botmode module: Adds the user mode +B. If set on a user, it will
# show that the user is a bot in /WHOIS.
-#<module name="m_botmode.so">
+#<module name="botmode">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CallerID module: Adds usermode +g which activates hybrid-style
# callerid: block all private messages unless you /ACCEPT first.
-#<module name="m_callerid.so">
+#<module name="callerid">
#
#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# maxaccepts - Maximum number of entries a user can add to his #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CAP module: Provides the CAP negotiation mechanism required by the
-# m_sasl, m_namesx, m_uhnames, and m_ircv3 modules.
-# It is also recommended for the STARTTLS support in m_starttls.
-#<module name="m_cap.so">
+# sasl, namesx, uhnames, and ircv3 modules.
+# It is also recommended for STARTTLS support in the starttls module.
+#<module name="cap">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CBAN module: Lets you disallow channels from being used at runtime.
# This module is oper-only and provides /CBAN.
# To use, CBAN must be in one of your oper class blocks.
-#<module name="m_cban.so">
+#<module name="cban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Censor module: Adds channel and user mode +G.
-#<module name="m_censor.so">
+#<module name="censor">
#
#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_censor module, then you must #
+# Optional - If you specify to use the censor module, then you must #
# specify some censor tags. See also: #
# http://wiki.inspircd.org/Modules/censor #
#
# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
# (http://cgiirc.sourceforge.net).
# Adds snomask +w for monitoring CGI:IRC connections.
-#<module name="m_cgiirc.so">
+#<module name="cgiirc">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
-# Optional - If you specify to use m_cgiirc, then you must specify one
+# Optional - If you specify to use cgiirc, then you must specify one
# or more cgihost tags which indicate authorised CGI:IRC servers which
# will be connecting to your network, and an optional cgiirc tag.
# For more information see: http://wiki.inspircd.org/Modules/cgiirc
# Channel create module: Adds snomask +j, which will notify opers of
# any new channels that are created.
# This module is oper-only.
-#<module name="m_chancreate.so">
+#<module name="chancreate">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel filter module: Allows channel-op defined message filtering
# using simple string matches (channel mode +g).
-#<module name="m_chanfilter.so">
+#<module name="chanfilter">
#
# If hidemask is set to yes, the user will not be shown the mask when
# his/her message is blocked.
# joining a channel with +H 'X:T' set; 'T' is the maximum time to keep
# lines in the history buffer. Designed so that the new user knows what
# the current topic of conversation is when joining the channel.
-#<module name="m_chanhistory.so">
+#<module name="chanhistory">
#
# Set the maximum number of lines allowed to be stored per channel below.
# This is the hard limit for 'X'.
# The "channel" field is where you want the messages to go, "snomasks"
# is what snomasks you want to be sent to that channel. Multiple tags
# are allowed.
-#<module name="m_chanlog.so">
+#<module name="chanlog">
#<chanlog snomasks="AOcC" channel="#opers">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# characters in the channel name such as bold, colorcodes, etc. which
# can be quite annoying and allow users to on occasion have a channel
# that looks like the name of another channel on the network.
-#<module name="m_channames.so">
+#<module name="channames">
<channames
# denyrange: characters or range of characters to deny in channel
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channelban: Implements extended ban j:, which stops anyone already
# in a channel matching a ban like +b j:#channel*mask from joining.
-#<module name="m_channelban.so">
+#<module name="channelban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Check module: Adds the /CHECK command.
# IP addresses and hosts.
# This module is oper-only.
# To use, CHECK must be in one of your oper class blocks.
-#<module name="m_check.so">
+#<module name="check">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGHOST module: Adds the /CHGHOST command.
# NOTE: Services will not be able to set vhosts on users if this module
# isn't loaded. If you're planning on running services, you probably
# want to load this.
-#<module name="m_chghost.so">
+#<module name="chghost">
#
#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
# Optional - If you want to use special chars for hostnames you can #
# CHGIDENT module: Adds the /CHGIDENT command.
# This module is oper-only.
# To use, CHGIDENT must be in one of your oper class blocks.
-#<module name="m_chgident.so">
+#<module name="chgident">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CHGNAME module: Adds the /CHGNAME command.
# This module is oper-only.
# To use, CHGNAME must be in one of your oper class blocks.
-#<module name="m_chgname.so">
+#<module name="chgname">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clear chan module: Allows opers to masskick, masskill or mass-G/ZLine
# all users on a channel using /CLEARCHAN.
-#<module name="m_clearchan.so">
+#<module name="clearchan">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Cloaking module: Adds usermode +x and cloaking support.
-# Relies on the module m_md5.so being loaded.
-# To cloak users when they connect, load m_conn_umodes and set
+# Relies on the md5 module being loaded.
+# To cloak users when they connect, load the conn_umodes module and set
# <connect:modes> to include the +x mode. The example <connect> tag
-# shows this. See the m_conn_umodes module for more information.
-#<module name="m_cloaking.so">
+# shows this. See the conn_umodes module for more information.
+#<module name="cloaking">
#
#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# To use m_cloaking, you must define a cloak key, and optionally a #
+# To use cloaking, you must define a cloak key, and optionally a #
# cloak prefix as shown below. The cloak key must be shared across #
# the network for correct cloaking. #
# #
# Close module: Allows an oper to close all unregistered connections.
# This module is oper-only and provides the /CLOSE command.
# To use, CLOSE must be in one of your oper class blocks.
-#<module name="m_close.so">
+#<module name="close">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Clones module: Adds an oper command /CLONES for detecting cloned
# issued, use with care.
# This module is oper-only.
# To use, CLONES must be in one of your oper class blocks.
-#<module name="m_clones.so">
+#<module name="clones">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Common channels module: Adds user mode +c, which, when set, requires
# that users must share a common channel with you to PRIVMSG or NOTICE
# you.
-#<module name="m_commonchans.so">
+#<module name="commonchans">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auto join on connect module: Allows you to force users to join one
# or more channels automatically upon connecting to the server, or
# join them in case they aren't on any channels after being online
# for X seconds.
-#<module name="m_conn_join.so">
+#<module name="conn_join">
#
#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
-# If you have m_conn_join.so loaded, you can configure it using the
-# following values, or set autojoin="#chat,#help" in <connect> blocks.
+# If you have the conn_join module loaded, you can configure it below
+# or set autojoin="#chat,#help" in <connect> blocks.
#
# Join users immediately after connection to #one #two and #three.
#<autojoin channel="#one,#two,#three">
# Set modes on connect module: When this module is loaded <connect>
# blocks may have an optional modes="" value, which contains modes to
# add or remove from users when they connect to the server.
-#<module name="m_conn_umodes.so">
+#<module name="conn_umodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Wait for PONG on connect module: Send a PING to all connecting users
# and don't let them connect until they reply with a PONG.
# This is useful to stop certain kinds of bots and proxies.
-#<module name="m_conn_waitpong.so">
+#<module name="conn_waitpong">
#
#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you have the m_conn_waitpong.so module loaded, configure it with #
-# the <waitpong> tag: #
+# If you have the conn_waitpong module loaded, configure it with the #
+# <waitpong> tag: #
# #
# sendsnotice - Whether to send a helpful notice to users on #
# connect telling them how to connect, should #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channel cycle module: Adds the /CYCLE command which is a server-side
# /HOP that bypasses restrictive modes.
-#<module name="m_cycle.so">
+#<module name="cycle">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connectban: Provides IP connection throttling. Any IP range that
# connects too many times (configurable) in an hour is Z-Lined for a
# (configurable) duration, and their count resets to 0.
-#<module name="m_connectban.so">
+#<module name="connectban">
#
# ipv4cidr and ipv6cidr allow you to turn the comparison from
# individual IP addresses (32 and 128 bits) into CIDR masks, to allow
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connection throttle module.
-#<module name="m_connflood.so">
+#<module name="connflood">
#
#-#-#-#-#-#-#-#-#-#-#- CONNTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# seconds, maxconns - Amount of connections per <seconds>.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Custom prefixes: Allows for channel prefixes to be added.
-#<module name="m_customprefix.so">
+#<module name="customprefix">
#
# name The name of the mode, must be unique from other modes.
# letter The letter used for this mode. Required.
#<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
#<customprefix name="halfvoice" letter="V" prefix="-" rank="1" ranktoset="20000">
#
-# Do /RELOADMODULE m_customprefix.so after changing the settings of this module.
+# Do /RELOADMODULE customprefix after changing the settings of this module.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Custom title module: Adds the /TITLE command which allows for trusted
# users to gain a custom whois line and an optional vhost can be
# specified.
-#<module name="m_customtitle.so">
+#<module name="customtitle">
#
#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# name - The username used to identify.
# password - The password used to identify.
# hash - The hash for the specific user's password (optional).
-# m_password_hash.so and a hashing module must be loaded
+# password_hash and a hashing module must be loaded
# for this to work.
# host - Allowed hostmask (optional).
# title - Title shown in whois.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command.
-#<module name="m_dccallow.so">
+#<module name="dccallow">
#
#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# blockchat - Whether to block DCC CHAT as well as DCC SEND.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deaf module: Adds support for the usermode +d - deaf to channel
# messages and channel notices.
-#<module name="m_deaf.so">
+#<module name="deaf">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Delay join module: Adds the channel mode +D which delays all JOIN
# speaking, their quit or part message will not be shown to the channel
# which helps cut down noise on large channels in a more friendly way
# than the auditorium mode. Only channel ops may set the +D mode.
-#<module name="m_delayjoin.so">
+#<module name="delayjoin">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Delay message module: Adds the channel mode +d which disallows a user
# from talking in the channel unless they've been joined for X seconds.
# Settable using /MODE #chan +d 30
-#<module name="m_delaymsg.so">
+#<module name="delaymsg">
# Set allownotice to no to disallow NOTICEs too. Defaults to yes.
#<delaymsg allownotice="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Deny channels module: Deny channels from being used by users.
-#<module name="m_denychans.so">
+#<module name="denychans">
#
#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# If you have the m_denychans.so module loaded, you need to specify #
-# the channels to deny: #
+# If you have the denychans module loaded, you need to specify the #
+# channels to deny: #
# #
# name - The channel name to deny (glob masks are ok). #
# allowopers - If operators are allowed to override the deny. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Devoice module: Let users devoice themselves using /DEVOICE #chan.
-#<module name="m_devoice.so">
+#<module name="devoice">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DNS blacklist module: Provides support for looking up IPs on one or #
# more blacklists. #
-#<module name="m_dnsbl.so"> #
+#<module name="dnsbl"> #
# #
-# For configuration options please see the wiki page for m_dnsbl at #
+# For configuration options please see the wiki page for dnsbl at #
# http://wiki.inspircd.org/Modules/dnsbl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# channel operators to be exempt from some channel modes. Supported #
# modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, #
# filter, regmoderated, nonick, nonotice, and stripcolor. #
-#<module name="m_exemptchanops.so"> #
+#<module name="exemptchanops"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides message filtering, similar to SPAMFILTER. #
-#<module name="m_filter.so">
+#<module name="filter">
# #
-# This module depends upon a regex provider such as m_regex_pcre or #
-# m_regex_glob to function. You must specify which of these you want #
-# m_filter to use via the tag below. #
+# This module depends upon a regex provider such as regex_pcre or #
+# regex_glob to function. You must specify which of these you want #
+# the filter module to use via the tag below. #
# #
# Valid engines are: #
# #
-# glob - Glob patterns, provided via m_regex_glob. #
-# pcre - PCRE regexps, provided via m_regex_pcre, needs libpcre. #
-# tre - TRE regexps, provided via m_regex_tre, requires libtre. #
-# posix - POSIX regexps, provided via m_regex_posix, not available #
+# glob - Glob patterns, provided via regex_glob. #
+# pcre - PCRE regexps, provided via regex_pcre, needs libpcre. #
+# tre - TRE regexps, provided via regex_tre, requires libtre. #
+# posix - POSIX regexps, provided via regex_posix, not available #
# on Windows, no dependencies on other operating systems. #
-# stdlib - stdlib regexps, provided via m_regex_stdlib, see comment #
+# stdlib - stdlib regexps, provided via regex_stdlib, see comment #
# at the <module> tag for info on availability. #
# #
#<filteropts engine="glob"> #
#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_filter module, then #
+# Optional - If you specify to use the filter module, then #
# specify below the path to the filter.conf file, or define some #
# <filter> tags. #
# #
# allowing all IPs to connect to all plaintext IRC ports #
#<bind address="" port="8430" type="flashpolicyd"> #
#<flashpolicyd timeout="5" file=""> #
-#<module name="m_flashpolicyd.so"> #
+#<module name="flashpolicyd"> #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Gecos ban: Implements extended ban 'r', which stops anyone matching
# a mask like +b r:*realname?here* from joining a channel.
-#<module name="m_gecosban.so">
+#<module name="gecosban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GeoIP module: Allows the server admin to match users by country code.
# This module requires GeoIP to be installed on your system,
# use your package manager to find the appropriate packages
# or check the InspIRCd wiki page for this module.
-#<module name="m_geoip.so">
+#<module name="geoip">
#
# The actual allow/ban actions are done by connect classes, not by the
# GeoIP module. An example connect class to ban people from russia or
# Globops module: Provides the /GLOBOPS command and snomask +g.
# This module is oper-only.
# To use, GLOBOPS must be in one of your oper class blocks.
-#<module name="m_globops.so">
+#<module name="globops">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Global load module: Allows loading and unloading of modules network-
# and /GRELOADMODULE.
# To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE
# must be in one of your oper class blocks.
-#<module name="m_globalload.so">
+#<module name="globalload">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HELPOP module: Provides the /HELPOP command
-#<module name="m_helpop.so">
+#<module name="helpop">
#
#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you specify to use the m_helpop.so module, then specify below #
-# the path to the helpop.conf file. #
+# If you specify to use the helpop module, then specify below the #
+# path to the helpop.conf file. #
# #
#<include file="examples/inspircd.helpop-full.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide chans module: Allows users to hide their channels list from non-
# opers by setting user mode +I on themselves.
-#<module name="m_hidechans.so">
+#<module name="hidechans">
#
# This mode can optionally prevent opers from seeing channels on a +I
# user, for more privacy if set to true.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hide list module: Allows for hiding the list of listmodes from users
# who do not have sufficient channel rank.
-#<module name="m_hidelist.so">
+#<module name="hidelist">
#
# Each <hidelist> tag configures one listmode to hide.
# mode: Name of the listmode to hide.
# Hide oper module: Allows opers to hide their oper status from non-
# opers by setting user mode +H on themselves.
# This module is oper-only.
-#<module name="m_hideoper.so">
+#<module name="hideoper">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Hostchange module: Allows a different style of cloaking.
-#<module name="m_hostchange.so">
+#<module name="hostchange">
#
#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
# #
# hostcycle: If loaded, when a user gets a host or ident set, it will
# cycle them in all their channels. If not loaded it will simply change
# their host/ident without cycling them.
-#<module name="m_hostcycle.so">
+#<module name="hostcycle">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# httpd module: Provides HTTP server support for InspIRCd.
-#<module name="m_httpd.so">
+#<module name="httpd">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
-# If you choose to use the m_httpd.so module, then you will need to add
+# If you choose to use the httpd module, then you will need to add
# a <bind> tag with type "httpd", and load at least one of the other
-# m_httpd_* modules to provide pages to display.
+# httpd_* modules to provide pages to display.
#
# You can adjust the timeout for HTTP connections below. All HTTP
# connections will be closed after (roughly) this many seconds.
#<httpd timeout="20">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HTTP ACL module: Provides access control lists for m_httpd dependent
+# HTTP ACL module: Provides access control lists for httpd dependent
# modules. Use this module to restrict pages by IP address and by
# password.
-#<module name="m_httpd_acl.so">
+#<module name="httpd_acl">
#
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
-# Restrict access to the m_httpd_stats module to all but the local
+# Restrict access to the httpd_stats module to all but the local
# network and when the correct password is specified:
# <httpdacl path="/stats*" types="password,whitelist"
# username="secrets" password="mypasshere" whitelist="127.0.0.*,10.*">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HTTP config module: Allows the configuration of the server to be
-# viewed over HTTP. Requires m_httpd.so to be loaded for it to function.
-#<module name="m_httpd_config.so">
+# viewed over HTTP. Requires httpd to be loaded for it to function.
+#<module name="httpd_config">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# HTTP stats module: Provides basic stats pages over HTTP.
-# Requires m_httpd.so to be loaded for it to function.
-#<module name="m_httpd_stats.so">
+# Requires httpd to be loaded for it to function.
+#<module name="httpd_stats">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Ident: Provides RFC 1413 ident lookup support.
# When this module is loaded <connect:allow> tags may have an optional
# useident="yes|no" boolean value, determining whether or not to lookup
# ident on users matching that connect tag.
-#<module name="m_ident.so">
+#<module name="ident">
#
#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you are using the m_ident.so module, then you can #
-# specify the timeout for ident lookups here. If not defined, it will #
-# default to 5 seconds. This is a non-blocking timeout which holds #
-# the user in a 'connecting' state until the lookup is complete. #
+# Optional - If you are using the ident module, then you can specify #
+# the timeout for ident lookups here. If not defined, it will default #
+# to 5 seconds. This is a non-blocking timeout which holds the user #
+# in a 'connecting' state until the lookup is complete. #
# The bind value indicates which IP to bind outbound requests to. #
# nolookupprefix: If on, the idents of users being in a connect class #
# with ident lookups disabled (i.e. <connect useident="off">) will be #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Invite exception module: Adds support for channel invite exceptions
# (+I).
-#<module name="m_inviteexception.so">
+#<module name="inviteexception">
# bypasskey: If this is enabled, exceptions will bypass +k as well as +i
#<inviteexception bypasskey="yes">
# extended-join, away-notify and account-notify. These are optional
# enhancements to the client-to-server protocol. An extension is only
# active for a client when the client specifically requests it, so this
-# module needs m_cap to work.
+# module needs the cap module to work.
#
# Further information on these extensions can be found at the IRCv3
# working group website:
# http://ircv3.org/extensions/
#
-#<module name="m_ircv3.so">
+#<module name="ircv3">
# The following block can be used to control which extensions are
-# enabled. Note that extended-join can be incompatible with m_delayjoin
+# enabled. Note that extended-join can be incompatible with delayjoin
# and host cycling.
#<ircv3 accountnotify="on" awaynotify="on" extendedjoin="on">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Join flood module: Adds support for join flood protection +j X:Y.
# Closes the channel for 60 seconds if X users join in Y seconds.
-#<module name="m_joinflood.so">
+#<module name="joinflood">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Jump server module: Adds support for the RPL_REDIR numeric.
# To use, JUMPSERVER must be in one of your oper class blocks.
# If your server is redirecting new clients and you get disconnected,
# do a REHASH from shell to open up again.
-#<module name="m_jumpserver.so">
+#<module name="jumpserver">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Anti auto rejoin: Adds support for prevention of auto-rejoin (+J).
-#<module name="m_kicknorejoin.so">
+#<module name="kicknorejoin">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Knock module: Adds the /KNOCK command and channel mode +K.
-#<module name="m_knock.so">
+#<module name="knock">
#
# This setting specifies what to do when someone successfully /KNOCKs.
# If set to "notice", then a NOTICE will be sent to the channel.
# ./configure --enable-extras=m_ldap.cpp
# and run make install, then uncomment this module to enable it.
#
-#<module name="m_ldap.so">
+#<module name="ldap">
#<database module="ldap" id="ldapdb" server="ldap://localhost" binddn="cn=Manager,dc=inspircd,dc=org" bindauth="mysecretpass" searchscope="subtree">
# The server parameter indicates the LDAP server to connect to. The #
# ldap:// style scheme before the hostname proper is MANDATORY. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LDAP authentication module: Adds the ability to authenticate users #
# via LDAP. #
-#<module name="m_ldapauth.so">
+#<module name="ldapauth">
# #
# Configuration: #
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LDAP oper configuration module: Adds the ability to authenticate #
# opers via LDAP. #
-#<module name="m_ldapoper.so">
+#<module name="ldapoper">
# #
# Configuration: #
# #
# attribute="uid">
# #
# Available configuration items are identical to the same items in #
-# m_ldapauth above (except for the verbose setting, that is only #
-# supported in m_ldapauth). #
+# ldapauth above (except for the verbose setting, that is only #
+# supported in ldapauth). #
# Please always specify a password in your <oper> tags even if the #
# opers are to be authenticated via LDAP, so in case this module is #
# not loaded the oper accounts are still protected by a password. #
# If your server is locked and you get disconnected, do a REHASH from #
# shell to open up again. #
# This module is oper-only.
-#<module name="m_lockserv.so">
+#<module name="lockserv">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Map hiding module: replaces /MAP and /LINKS output to users with a #
# message to see a website, set by maphide="http://test.org/map" in #
# the <security> tag, instead. #
-#<module name="m_maphide.so">
+#<module name="maphide">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Message flood module: Adds message/notice flood protection via
# channel mode +f.
-#<module name="m_messageflood.so">
+#<module name="messageflood">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MLOCK module: Adds support for server-side enforcement of services
# side MLOCKs. Basically, this module suppresses any mode change that
# would likely be immediately bounced by services.
-#<module name="m_mlock.so">
+#<module name="mlock">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Modenotice module: Adds the /MODENOTICE command that allows opers to
# send notices to all users having the given user mode(s) set.
-#<module name="m_modenotice.so">
+#<module name="modenotice">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# MsSQL module: Allows other SQL modules to access MS SQL Server
# This module is in extras. Re-run configure with:
# ./configure --enable-extras=m_mssql.cpp
# and run make install, then uncomment this module to enable it.
-#<module name="m_mssql.so">
+#<module name="mssql">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_mssql.so is more complex than described here, see wiki for more #
+# mssql is more complex than described here, see the wiki for more #
# info http://wiki.inspircd.org/Modules/mssql #
#
#<database module="mssql" name="db" user="user" pass="pass" host="localhost" id="db1">
# This module is in extras. Re-run configure with:
# ./configure --enable-extras=m_mysql.cpp
# and run make install, then uncomment this module to enable it.
-#<module name="m_mysql.so">
+#<module name="mysql">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_mysql.so is more complex than described here, see the wiki for #
-# more: http://wiki.inspircd.org/Modules/mysql #
+# mysql is more complex than described here, see the wiki for more #
+# info: http://wiki.inspircd.org/Modules/mysql #
#
#<database module="mysql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database2">
# modes via long-form mode names via +Z and the /PROP command.
# For example, to set a ban, do /mode #channel +Z ban=foo!bar@baz or
# /PROP #channel ban=foo!bar@baz
-#<module name="m_namedmodes.so">
+#<module name="namedmodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# NAMESX module: Provides support for the NAMESX extension which allows
# clients to see all the prefixes set on a user without getting confused.
# This is supported by mIRC, x-chat, klient, and maybe more.
-#<module name="m_namesx.so">
+#<module name="namesx">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# National characters module:
# 1) Allows using national characters in nicknames.
# 2) Allows using custom (national) casemapping over the network.
-#<module name="m_nationalchars.so">
+#<module name="nationalchars">
#
# file - filename of existing file in "locales" directory
# casemapping - custom value for 005 numeric (if you want it to be
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nickchange flood protection module: Provides channel mode +F X:Y
# which allows up to X nick changes in Y seconds.
-#<module name="m_nickflood.so">
+#<module name="nickflood">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Nicklock module: Let opers change a user's nick and then stop that
# user from changing their nick again until unlocked.
# This module is oper-only.
# To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks.
-#<module name="m_nicklock.so">
+#<module name="nicklock">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No CTCP module: Adds the channel mode +C to block CTCPs and extban
# 'C' to block CTCPs sent by specific users.
-#<module name="m_noctcp.so">
+#<module name="noctcp">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No kicks module: Adds the +Q channel mode and the Q: extban to deny
# certain users from kicking.
-#<module name="m_nokicks.so">
+#<module name="nokicks">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No nicks module: Adds the +N channel mode, as well as the 'N' extban.
# +N stops all users from changing their nick, the N extban stops
# anyone from matching a +b N:nick!user@host mask from changing their
# nick.
-#<module name="m_nonicks.so">
+#<module name="nonicks">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No part message module: Adds extban 'p' to block part messages from #
# matching users. #
-#<module name="m_nopartmsg.so">
+#<module name="nopartmsg">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# No notice module: Adds the channel mode +T and the extban 'T' to
# block specific users from noticing the channel.
-#<module name="m_nonotice.so">
+#<module name="nonotice">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Network business join module:
# Allows an oper to join a channel using /OJOIN, giving them +Y on the
# channel which makes them immune to kick/deop/etc.
-#<module name="m_ojoin.so">
+#<module name="ojoin">
#
# Specify the prefix that +Y will grant here.
# Leave 'prefix' empty if you do not wish +Y to grant a prefix.
# /mode #channel +iI O:* is equivalent to channel mode +O, but you
# may also set +iI O:AdminTypeOnly to only allow admins.
# Modes +I and +e work in a similar fashion.
-#<module name="m_operchans.so">
+#<module name="operchans">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper join module: Auto-joins opers to a channel upon oper-up.
-# This module is oper-only. For the user equivalent, see m_conn_join.
-#<module name="m_operjoin.so">
+# This module is oper-only. For the user equivalent, see the conn_join
+# module.
+#<module name="operjoin">
#
#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you are using the m_operjoin.so module, specify options here: #
+# If you are using the operjoin module, specify options here: #
# #
# channel - The channel name to join, can also be a comma #
# separated list e.g. "#channel1,#channel2". #
# type "m_operlog" at default loglevel), and optionally to the 'r'
# snomask.
# This module is oper-only.
-#<module name="m_operlog.so">
+#<module name="operlog">
#
# If the following option is on then all oper commands will be sent to
# the snomask 'r'. The default is off.
#
# Load this module if you want all your IRC operators to have channel
# operator powers.
-#<module name="m_operprefix.so">
+#<module name="operprefix">
#
# You may additionally customise the prefix character.
#<operprefix prefix="!">
# Oper MOTD module: Provides support for separate message of the day
# on oper-up.
# This module is oper-only.
-#<module name="m_opermotd.so">
+#<module name="opermotd">
#
#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you are using the m_opermotd.so module, specify the motd here. #
+# If you are using the opermotd module, specify the motd here. #
# #
# onoper - If on, the message is sent on /OPER, otherwise it's #
# only sent when /OPERMOTD is used. #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Override module: Adds support for oper override.
# This module is oper-only.
-#<module name="m_override.so">
+#<module name="override">
#
#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# m_override.so is too complex it describe here, see the wiki: #
+# override is too complex it describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/override #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# being taken by lower level opers against higher level opers.
# Specify the level as the 'level' parameter of the <type> tag.
# This module is oper-only.
-#<module name="m_operlevels.so">
+#<module name="operlevels">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper modes module: Allows you to specify modes to add/remove on oper.
# Specify the modes as the 'modes' parameter of the <type> tag
# and/or as the 'modes' parameter of the <oper> tag.
-# This module is oper-only. For the user equivalent, see m_conn_umodes.
-#<module name="m_opermodes.so">
+# This module is oper-only. For the user equivalent, see the
+# conn_umodes module.
+#<module name="opermodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Password forwarding module: Forwards a password users can send on
# connect to the specified client below. The client is usually NickServ
# and this module is usually used to authenticate users with NickServ
# using their connect password.
-#<module name="m_passforward.so">
+#<module name="passforward">
<passforward
# nick: nick to forward connect passwords to.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Password hash module: Allows hashed passwords to be used.
-# To be useful, a hashing module like m_sha256.so also needs to be loaded.
-#<module name="m_password_hash.so">
+# To be useful, a hashing module like sha256 also needs to be loaded.
+#<module name="password_hash">
#
#-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
#
# PBKDF2 module: Allows other modules to generate PBKDF2 hashes,
# usually for cryptographic uses and security.
# This module relies on other hash providers (e.g. SHA256).
-#<module name="m_pbkdf2.so">
+#<module name="pbkdf2">
#
# iterations: Iterations the hashing function runs when generating new
# hashes.
# channels -may- need support from your Services package to function
# properly with them. This adds channel mode +P.
# This module is oper-only.
-#<module name="m_permchannels.so">
+#<module name="permchannels">
#
-# If you like, m_permchannels can write a config file of permanent channels
+# If you like, this module can write a config file of permanent channels
# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
# If you want to do this, set the filename below, and uncomment the include.
#
# This module is in extras. Re-run configure with:
# ./configure --enable-extras=m_pgsql.cpp
# and run make install, then uncomment this module to enable it.
-#<module name="m_pgsql.so">
+#<module name="pgsql">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_pgsql.so is more complex than described here, see the wiki for #
+# pgsql is more complex than described here, see the wiki for #
# more: http://wiki.inspircd.org/Modules/pgsql #
#
#<database module="pgsql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database" ssl="no">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Muteban: Implements extended ban 'm', which stops anyone matching
# a mask like +b m:nick!user@host from speaking on channel.
-#<module name="m_muteban.so">
+#<module name="muteban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Random quote module: Provides a random quote on connect.
# NOTE: Some of these may mimic fatal errors and confuse users and
# opers alike - BEWARE!
-#<module name="m_randquote.so">
+#<module name="randquote">
#
#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_randquote.so module, then #
-# specify below the path to the quotes file. #
+# Optional - If you specify to use the randquote module, then specify #
+# below the path to the quotes file. #
# #
#<randquote file="quotes.txt">
# This also breaks linking to servers that do not have the option. #
# This defaults to false for the 2.0 version, it will be enabled in #
# all the future versions. #
-#<module name="m_redirect.so">
+#<module name="redirect">
#<redirect antiredirect="true">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for glob or wildcard (?/*) matching.
-# You must have at least 1 provider loaded to use m_filter or m_rline
+# You must have at least 1 provider loaded to use the filter or rline
# modules. This module has no additional requirements, as it uses the
# matching already present in InspIRCd core.
-#<module name="m_regex_glob.so">
+#<module name="regex_glob">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for PCRE (Perl-Compatible Regular
# Expressions). You need libpcre installed to compile and load this
-# module. You must have at least 1 provider loaded to use m_filter or
-# m_rline.
-#<module name="m_regex_pcre.so">
+# module. You must have at least 1 provider loaded to use the filter or
+# rline modules.
+#<module name="regex_pcre">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular Expression Provider for RE2 Regular Expressions.
# You need libre2 installed and in your include/library paths in order
# to compile and load this module.
-#<module name="m_regex_re2.so">
+#<module name="regex_re2">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for POSIX regular expressions.
# You shouldn't need any additional libraries on a POSIX-compatible
# system (i.e.: any Linux, BSD, but not Windows). You must have at
-# least 1 provider loaded to use m_filter or m_rline.
+# least 1 provider loaded to use filter or rline.
# On POSIX-compliant systems, regex syntax can be found by using the
# command: 'man 7 regex'.
-#<module name="m_regex_posix.so">
+#<module name="regex_posix">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for C++11 std::regex regular expressions.
# You should verify that std::regex is supported by your setup before
# using this module, as it may compile normally but won't do anything
# on some implementations.
-#<module name="m_regex_stdlib.so">
+#<module name="regex_stdlib">
#
# Specify the regular expression engine to use here. Valid settings are
# bre, ere, awk, grep, egrep, ecmascript (default if not specified).
# if you are most familiar with the syntax of /SPAMFILTER from there,
# this is the provider you want. You need libtre installed in order
# to compile and load this module.
-#<module name="m_regex_tre.so">
+#<module name="regex_tre">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Registered users only channel creation module. If enabled, only
#
# You probably *DO NOT* want to load this module on a public network.
#
-#<module name="m_regonlycreate.so">
+#<module name="regonlycreate">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remove module: Adds the /REMOVE command which is a peaceful
# alternative to /KICK.
-#<module name="m_remove.so">
+#<module name="remove">
#
# supportnokicks: If true, /REMOVE is not allowed on channels where the
# nokicks (+Q) mode is set. Defaults to false.
# before they are checked, resulting in less CPU usage. Increasing this beyond 512
# doesn't have any effect, as the maximum length of a message on IRC cannot exceed that.
#<repeat maxbacklog="20" maxlines="20" maxdistance="50" maxsecs="0" size="512">
-#<module name="m_repeat.so">
+#<module name="repeat">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restricted channels module: Allows only opers to create channels.
#
# You probably *DO NOT* want to load this module on a public network.
#
-#<module name="m_restrictchans.so">
+#<module name="restrictchans">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restrict message module: Allows users to only message opers.
#
# You probably *DO NOT* want to load this module on a public network.
#
-#<module name="m_restrictmsg.so">
+#<module name="restrictmsg">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# R-Line module: Ban users through regular expression patterns.
-#<module name="m_rline.so">
+#<module name="rline">
#
#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
#
# Also, this is where you set what Regular Expression engine is to be
# used. If you ever change it while running, all of your R-Lines will
# be wiped. This is the regex engine used by all R-Lines set, and
-# m_regex_<engine>.so must be loaded, or rline will be non-functional
+# regex_<engine> must be loaded, or rline will be non-functional
# until you load it or change the engine to one that is loaded.
#
#<rline matchonnickchange="yes" engine="pcre">
# Allows channel mods to remove list modes en masse.
# Syntax: /rmode <channel> <mode> [pattern]
# E.g. '/rmode #Channel b m:*' will remove all mute-extbans on the channel.
-#<module name="m_rmode.so">
+#<module name="rmode">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAJOIN module: Adds the /SAJOIN command which forcibly joins a user
# To use, SAJOIN must be in one of your oper class blocks.
# Opers need the users/sajoin-others priv to be able to /SAJOIN users
# other than themselves.
-#<module name="m_sajoin.so">
+#<module name="sajoin">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAKICK module: Adds the /SAKICK command which kicks a user from the
# given channel.
# This module is oper-only.
# To use, SAKICK must be in one of your oper class blocks.
-#<module name="m_sakick.so">
+#<module name="sakick">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAMODE module: Adds the /SAMODE command which allows server operators
# channel priviliges. Also allows changing user modes for any user.
# This module is oper-only.
# To use, SAMODE must be in one of your oper class blocks.
-#<module name="m_samode.so">
+#<module name="samode">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SANICK module: Adds the /SANICK command which allows opers to change
# users' nicks.
# This module is oper-only.
# To use, SANICK must be in one of your oper class blocks.
-#<module name="m_sanick.so">
+#<module name="sanick">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAPART module: Adds the /SAPART command which forcibly parts a user
# from a channel.
# This module is oper-only.
# To use, SAPART must be in one of your oper class blocks.
-#<module name="m_sapart.so">
+#<module name="sapart">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SAQUIT module: Adds the /SAQUIT command which forcibly quits a user.
# This module is oper-only.
# To use, SAQUIT must be in one of your oper class blocks.
-#<module name="m_saquit.so">
+#<module name="saquit">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SATOPIC module: Adds the /SATOPIC command which allows changing the
# topic on a channel without requiring any channel priviliges.
# This module is oper-only.
# To use, SATOPIC must be in one of your oper class blocks.
-#<module name="m_satopic.so">
+#<module name="satopic">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SASL authentication module: Provides support for IRC Authentication
-# Layer via AUTHENTICATE. Note: You also need to have m_cap.so loaded
+# Layer via AUTHENTICATE. Note: You also need to have cap loaded
# for SASL to work.
-#<module name="m_sasl.so">
+#<module name="sasl">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Secure list module: Prevent /LIST in the first minute of connection,
# crippling most spambots and trojan spreader bots.
-#<module name="m_securelist.so">
+#<module name="securelist">
#
#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Servprotect module: Provides support for Austhex style +k /
# UnrealIRCD +S services mode.
-#<module name="m_servprotect.so">
+#<module name="servprotect">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# See nicks module: Adds snomask +n and +N which show local and remote
# nick changes.
# This module is oper-only.
-#<module name="m_seenicks.so">
+#<module name="seenicks">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Set idle module: Adds a command for opers to change their idle time.
# This module is oper-only.
# To use, SETIDLE must be in one of your oper class blocks.
-#<module name="m_setidle.so">
+#<module name="setidle">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Services support module: Adds several usermodes such as +R and +M.
# +b R: (stop matching account names from joining)
# +b U:n!u@h (blocks matching unregistered users)
#
-#<module name="m_services_account.so">
+#<module name="services_account">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Sethost module: Adds the /SETHOST command.
# This module is oper-only.
# To use, SETHOST must be in one of your oper class blocks.
-# See m_chghost for how to customise valid chars for hostnames.
-#<module name="m_sethost.so">
+# See the chghost module for how to customise valid chars for hostnames.
+#<module name="sethost">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Setident module: Adds the /SETIDENT command.
# This module is oper-only.
# To use, SETIDENT must be in one of your oper class blocks.
-#<module name="m_setident.so">
+#<module name="setident">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SETNAME module: Adds the /SETNAME command.
-#<module name="m_setname.so">
+#<module name="setname">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Serverban: Implements extended ban 's', which stops anyone connected
# to a server matching a mask like +b s:server.mask.here from joining.
-#<module name="m_serverban.so">
+#<module name="serverban">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Showfile: Provides support for showing a text file to users when #
# they enter a command. #
# This module adds one command for each <showfile> tag that shows the #
# given file to the user as a series of messages or numerics. #
-#<module name="m_showfile.so"> #
+#<module name="showfile"> #
# #
#-#-#-#-#-#-#-#-#-#-# SHOWFILE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# Show whois module: Adds the +W usermode which allows opers to see
# when they are /WHOIS'd.
# This module is oper-only by default.
-#<module name="m_showwhois.so">
+#<module name="showwhois">
#
# If you wish, you may also let users set this mode. Only opers with the
# users/auspex priv will see real hosts of people, though.
# executing all except configured commands.
# This module is oper-only.
# To use, SHUN must be in one of your oper class blocks.
-#<module name="m_shun.so">
+#<module name="shun">
#
# You may also configure which commands you wish a user to be able to
# perform when shunned. It should be noted that if a shunned user
# channel mode +z and the 'z' extban which matches SSL client
# certificate fingerprints.
# Does not do anything useful without a working SSL module (see below).
-#<module name="m_sslmodes.so">
+#<module name="sslmodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
# if enabled. You must answer 'yes' in ./configure when asked or
# manually symlink the source for this module from the directory
# src/modules/extra, if you want to enable this, or it will not load.
-#<module name="m_ssl_gnutls.so">
+#<module name="ssl_gnutls">
#
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_ssl_gnutls.so is too complex to describe here, see the wiki: #
+# ssl_gnutls is too complex to describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/ssl_gnutls #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SSL info module: Allows users to retrieve information about other
# users' peer SSL certificates and keys. This can be used by client
-# scripts to validate users. For this to work, one of m_ssl_gnutls.so
-# or m_ssl_openssl.so must be loaded. This module also adds the
+# scripts to validate users. For this to work, one of ssl_gnutls
+# or ssl_openssl must be loaded. This module also adds the
# "* <user> is using a secure connection" whois line, the ability for
# opers to use SSL cert fingerprints to verify their identity and the
# ability to force opers to use SSL connections in order to oper up.
# For how to use the oper features, please see the first example <oper> tag
# in opers.conf.example.
#
-#<module name="m_sslinfo.so">
+#<module name="sslinfo">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
# if enabled. You must answer 'yes' in ./configure when asked or symlink
# the source for this module from the directory src/modules/extra, if
# you want to enable this, or it will not load.
-#<module name="m_ssl_openssl.so">
+#<module name="ssl_openssl">
#
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_ssl_openssl.so is too complex to describe here, see the wiki: #
+# ssl_openssl is too complex to describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/ssl_openssl #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Strip color module: Adds channel mode +S that strips mIRC color
# codes from all messages sent to the channel.
-#<module name="m_stripcolor.so">
+#<module name="stripcolor">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Silence module: Adds support for the /SILENCE command, which allows
# users to have a server-side ignore list for their client.
-#<module name="m_silence.so">
+#<module name="silence">
#
# Set the maximum number of entries allowed on a user's silence list.
#<silence maxentries="32"
# ./configure --enable-extras=m_sqlite.cpp
# and run make install, then uncomment this module to enable it. #
#
-#<module name="m_sqlite3.so">
+#<module name="sqlite3">
#
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_sqlite.so is more complex than described here, see the wiki for #
-# more: http://wiki.inspircd.org/Modules/sqlite3 #
+# sqlite is more complex than described here, see the wiki for more #
+# info: http://wiki.inspircd.org/Modules/sqlite3 #
#
#<database module="sqlite" hostname="/full/path/to/database.db" id="anytext">
# ./configure --enable-extras=m_sqlauth.cpp
# and run make install, then uncomment this module to enable it.
#
-#<module name="m_sqlauth.so">
+#<module name="sqlauth">
#
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_sqlauth.so is too complex to describe here, see the wiki: #
+# sqlauth is too complex to describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/sqlauth #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# ./configure --enable-extras=m_sqloper.cpp
# and run make install, then uncomment this module to enable it.
#
-#<module name="m_sqloper.so">
+#<module name="sqloper">
#
#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# StartTLS module: Implements STARTTLS, which allows clients #
# connected to non SSL enabled ports to enable SSL, if a proper SSL #
-# module is loaded (either m_ssl_gnutls or m_ssl_openssl). #
-#<module name="m_starttls.so">
+# module is loaded (either ssl_gnutls or ssl_openssl). #
+#<module name="starttls">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
# added/removed by Services. #
-#<module name="m_svshold.so">
+#<module name="svshold">
# SVSHOLD does not generate server notices by default, you can turn
# notices on by uncommenting the next line.
#<svshold silent="false">
# SWHOIS module: Allows you to add arbitrary lines to user WHOIS.
# This module is oper-only.
# To use, SWHOIS must be in one of your oper class blocks.
-#<module name="m_swhois.so">
+#<module name="swhois">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test module: Enable this to create a command useful in testing
# flood control. To avoid accidental use on live networks, the server
# name must contain ".test" to load the module
-#<module name="m_testnet.so">
+#<module name="testnet">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Timed bans module: Adds timed channel bans with the /TBAN command.
-#<module name="m_timedbans.so">
+#<module name="timedbans">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Test line module: Adds the /TLINE command, used to test how many
# users a /GLINE or /ZLINE etc. would match.
# This module is oper-only.
# To use, TLINE must be in one of your oper class blocks.
-#<module name="m_tline.so">
+#<module name="tline">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Topiclock module: implements server-side topic locking to achieve deeper
# integration with services packages.
-#<module name="m_topiclock.so">
+#<module name="topiclock">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# UHNAMES support module: Adds support for the IRCX style UHNAMES
# each user, saving clients from doing a WHO on the channel.
# If a client does not support UHNAMES it will not enable it, this will
# not break incompatible clients.
-#<module name="m_uhnames.so">
+#<module name="uhnames">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Uninvite module: Adds the /UNINVITE command which lets users remove
# pending invites from channels without waiting for the user to join.
-#<module name="m_uninvite.so">
+#<module name="uninvite">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Userip module: Adds the /USERIP command.
# Allows users to query their own IP, also allows opers to query the IP
# of anyone else.
-#<module name="m_userip.so">
+#<module name="userip">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Vhost module: Adds the VHOST command which allows for adding virtual
# hosts which are accessible using a username and password in the config.
-#<module name="m_vhost.so">
+#<module name="vhost">
#
#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
# #
# pass - Password for the vhost. #
# #
# hash - The hash for the specific user (optional) #
-# m_password_hash.so and a hashing module must be loaded #
-# for this to work. #
+# password_hash and a hashing module must be loaded for #
+# this to work. #
# #
# host - Vhost to set. #
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Watch module: Adds the WATCH command, which is used by clients to
# maintain notify lists.
-#<module name="m_watch.so">
+#<module name="watch">
#
# Set the maximum number of entries on a user's watch list below.
#<watch maxentries="32">
# for two reasons: it keeps bans so users may not evade them, and on
# bigger networks, server connections will take less time as there will
# be a lot less bans to apply - as most of them will already be there.
-#<module name="m_xline_db.so">
+#<module name="xline_db">
# Specify the filename for the xline database here.
#<xlinedb filename="data/xline.db">
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
# #
-# To link servers to InspIRCd, you MUST load the m_spanningtree #
-# module. If you don't do this, server links will NOT work at all. #
+# To link servers to InspIRCd, you MUST load the spanningtree module. #
+# If you don't do this, server links will NOT work at all. #
# This is by design, to allow for the implementation of other linking #
# protocols in modules in the future. #
# tree protocol (see the READ THIS BIT section above).
# You will almost always want to load this.
#
-#<module name="m_spanningtree.so">
+#<module name="spanningtree">
-<module name="m_md5.so">
-<module name="m_sha256.so">
+<module name="md5">
+<module name="sha256">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Alias module: Allows you to define server-side command aliases.
-<module name="m_alias.so">
+<module name="alias">
<fantasy prefix="!" allowbots="no">
# Aliases
<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
#<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
# requires="NickServ" uline="yes">
-<module name="m_allowinvite.so">
-<module name="m_alltime.so">
-<module name="m_auditorium.so">
+<module name="allowinvite">
+<module name="alltime">
+<module name="auditorium">
<auditorium showops="yes" operoverride="yes">
-<module name="m_banexception.so">
-<module name="m_blockcaps.so">
+<module name="banexception">
+<module name="blockcaps">
<blockcaps percent="50"
minlen="5"
capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
-<module name="m_blockcolor.so">
-<module name="m_botmode.so">
-<module name="m_censor.so">
+<module name="blockcolor">
+<module name="botmode">
+<module name="censor">
<include file="inspircd.censor.example">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
# (http://cgiirc.sourceforge.net).
-#<module name="m_cgiirc.so">
+#<module name="cgiirc">
#
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
#
-# Optional - If you specify to use m_cgiirc, then you must specify one
+# Optional - If you specify to use cgiirc, then you must specify one
# or more cgihost tags which indicate authorised CGI:IRC servers which
# will be connecting to your network, and an optional cgiirc tag.
# For more information see: http://wiki.inspircd.org/Modules/cgiirc
# sessions maximum.
#
-<module name="m_chanfilter.so">
+<module name="chanfilter">
<chanfilter hidemask="yes">
-<module name="m_check.so">
-<module name="m_chghost.so">
+<module name="check">
+<module name="chghost">
<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
-<module name="m_chgident.so">
-<module name="m_chgname.so">
-<module name="m_cloaking.so">
+<module name="chgident">
+<module name="chgname">
+<module name="cloaking">
<cloak mode="half"
key="secret"
prefix="net-">
-<module name="m_close.so">
-<module name="m_clones.so">
-<module name="m_commonchans.so">
+<module name="close">
+<module name="clones">
+<module name="commonchans">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Auto join on connect module: Allows you to force users to join one
# or more channels automatically upon connecting to the server.
-#<module name="m_conn_join.so">
+#<module name="conn_join">
#
#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
#
-# If you have m_conn_join.so loaded, you can configure it using the
-# follow values:
+# If you have the conn_join module loaded, you can configure it below:
#
#<autojoin channel="#one,#two,#three">
-<module name="m_conn_umodes.so">
-<module name="m_cycle.so">
+<module name="conn_umodes">
+<module name="cycle">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Connection throttle module.
-#<module name="m_connflood.so">
+#<module name="connflood">
#
#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# seconds, maxconns - Amount of connections per <seconds>.
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# DCCALLOW module: Adds the /DCCALLOW command.
-<module name="m_dccallow.so">
+<module name="dccallow">
#
#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# blockchat - Whether to block DCC CHAT as well as DCC SEND
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-<module name="m_deaf.so">
-<module name="m_denychans.so">
+<module name="deaf">
+<module name="denychans">
#<badchan name="#gods*" allowopers="yes" reason="Tortoises!"> #
#<badchan name="#heaven" redirect="#hell" reason="Nice try!"> #
-<module name="m_devoice.so">
+<module name="devoice">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Filter module: Provides message filtering, similar to SPAMFILTER.
-<module name="m_filter.so">
+<module name="filter">
# #
-# This module depends upon a regex provider such as m_regex_pcre or #
-# m_regex_glob to function. You must specify which of these you want #
-# m_filter to use via the tag below. #
+# This module depends upon a regex provider such as regex_pcre or #
+# regex_glob to function. You must specify which of these you want #
+# the filter module to use via the tag below. #
# #
# Valid engines are: #
# #
-# glob - Glob patterns, provided via m_regex_glob. #
-# pcre - PCRE regexps, provided via m_regex_pcre, needs libpcre. #
-# tre - TRE regexps, provided via m_regex_tre, requires libtre. #
-# posix - POSIX regexps, provided via m_regex_posix, not available #
+# glob - Glob patterns, provided via regex_glob. #
+# pcre - PCRE regexps, provided via regex_pcre, needs libpcre. #
+# tre - TRE regexps, provided via regex_tre, requires libtre. #
+# posix - POSIX regexps, provided via regex_posix, not available #
# on Windows, no dependencies on other operating systems. #
-# stdlib - stdlib regexps, provided via m_regex_stdlib, see comment #
+# stdlib - stdlib regexps, provided via regex_stdlib, see comment #
# at the <module> tag for info on availability. #
# #
<filteropts engine="glob">
#
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# Optional - If you specify to use the m_filter module, then #
+# Optional - If you specify to use the filter module, then #
# specfiy below the path to the filter.conf file, or define some #
# <filter> tags. #
# #
#<include file="filter.conf">
-<module name="m_gecosban.so">
-<module name="m_globops.so">
-<module name="m_globalload.so">
-<module name="m_halfop.so">
-<module name="m_helpop.so">
+<module name="gecosban">
+<module name="globops">
+<module name="globalload">
+<module name="halfop">
+<module name="helpop">
<include file="inspircd.helpop-full.example">
-<module name="m_hidechans.so">
+<module name="hidechans">
<hidechans affectsopers="false">
-<module name="m_hideoper.so">
-<module name="m_ident.so">
+<module name="hideoper">
+<module name="ident">
<ident timeout="1">
-<module name="m_inviteexception.so">
-<module name="m_joinflood.so">
-<module name="m_jumpserver.so">
-<module name="m_knock.so">
-<module name="m_messageflood.so">
-<module name="m_namesx.so">
-<module name="m_nickflood.so">
-<module name="m_noctcp.so">
-<module name="m_nokicks.so">
-<module name="m_nonicks.so">
-<module name="m_nopartmsg.so">
-<module name="m_nonotice.so">
-<module name="m_operchans.so">
+<module name="inviteexception">
+<module name="joinflood">
+<module name="jumpserver">
+<module name="knock">
+<module name="messageflood">
+<module name="namesx">
+<module name="nickflood">
+<module name="noctcp">
+<module name="nokicks">
+<module name="nonicks">
+<module name="nopartmsg">
+<module name="nonotice">
+<module name="operchans">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper join module: Auto-joins opers to a channel upon oper-up.
-# This module is oper-only. For the user equivalent, see m_conn_join.
-<module name="m_operjoin.so">
+# This module is oper-only. For the user equivalent, see the conn_join
+# module.
+<module name="operjoin">
#
#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you are using the m_operjoin.so module, specify options here: #
+# If you are using the operjoin module, specify options here: #
# #
# channel - The channel name to join, can also be a comma #
# separated list eg. "#channel1,#channel2". #
#
#<type name="Helper" autojoin="#help" classes="...">
-<module name="m_operlog.so">
+<module name="operlog">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Oper MOTD module: Provides support for separate message of the day
# on oper-up.
# This module is oper-only.
-#<module name="m_opermotd.so">
+#<module name="opermotd">
#
#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# If you are using the m_opermotd.so module, specify the motd here #
+# If you are using the opermotd module, specify the motd here #
# #
# onoper - If on, the message is sent on /OPER, otherwise it's #
# only sent when /OPERMOTD is used. #
# #
#<opermotd file="oper.motd" onoper="yes">
-<module name="m_override.so">
+<module name="override">
#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
# #
-# m_override.so is too complex to describe here, see the wiki: #
+# The override module is too complex to describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/override #
-<module name="m_operlevels.so">
-<module name="m_opermodes.so">
-<module name="m_password_hash.so">
-<module name="m_muteban.so">
+<module name="operlevels">
+<module name="opermodes">
+<module name="password_hash">
+<module name="muteban">
-<module name="m_redirect.so">
-<module name="m_regex_glob.so">
+<module name="redirect">
+<module name="regex_glob">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for PCRE (Perl-Compatible Regular
# Expressions). You need libpcre installed to compile and load this
-# module. You must have at least 1 provider loaded to use m_filter or
-# m_rline.
-#<module name="m_regex_pcre.so">
+# module. You must have at least 1 provider loaded to use the filter
+# or the rline module.
+#<module name="regex_pcre">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for POSIX Regular Expressions.
# You shouldn't need any additional libraries on a POSIX-compatible
# system (ie: any Linux, BSD, but not Windows). You must have at least
-# 1 provider loaded to use m_filter or m_rline.
+# 1 provider loaded to use the filter or rline module.
# On POSIX-compliant systems, regex syntax can be found by using the
# command: 'man 7 regex'.
-#<module name="m_regex_posix.so">
+#<module name="regex_posix">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Regular expression provider for TRE Regular Expressions.
# if you are most familiar with the syntax of /spamfilter from there,
# this is the provider you want. You need libtre installed in order
# to compile and load this module.
-#<module name="m_regex_tre.so">
+#<module name="regex_tre">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Registered users only channel creation module. If enabled, only
#
# You probably *DO NOT* want to load this module on a public network.
#
-#<module name="m_regonlycreate.so">
+#<module name="regonlycreate">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restricted channels module: Allows only opers to create channels.
#
# You probably *DO NOT* want to load this module on a public network.
#
-#<module name="m_restrictchans.so">
+#<module name="restrictchans">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Restrict message module: Allows users to only message opers.
#
# You probably *DO NOT* want to load this module on a public network.
#
-#<module name="m_restrictmsg.so">
-
-<module name="m_sajoin.so">
-<module name="m_sakick.so">
-<module name="m_samode.so">
-<module name="m_sanick.so">
-<module name="m_sapart.so">
-<module name="m_saquit.so">
-<module name="m_satopic.so">
-<module name="m_servprotect.so">
-<module name="m_seenicks.so">
-<module name="m_setidle.so">
-<module name="m_services_account.so">
-<module name="m_sethost.so">
-<module name="m_setident.so">
-<module name="m_setname.so">
-<module name="m_showwhois.so">
+#<module name="restrictmsg">
+
+<module name="sajoin">
+<module name="sakick">
+<module name="samode">
+<module name="sanick">
+<module name="sapart">
+<module name="saquit">
+<module name="satopic">
+<module name="servprotect">
+<module name="seenicks">
+<module name="setidle">
+<module name="services_account">
+<module name="sethost">
+<module name="setident">
+<module name="setname">
+<module name="showwhois">
<showwhois opersonly="yes" showfromopers="yes">
-<module name="m_shun.so">
+<module name="shun">
<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="no" affectopers="no">
-<module name="m_sslmodes.so">
+<module name="sslmodes">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
# if enabled. You must answer 'yes' in ./configure when asked or symlink
# the source for this module from the directory src/modules/extra, if
# you want to enable this, or it will not load.
-#<module name="m_ssl_gnutls.so">
+#<module name="ssl_gnutls">
#
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_ssl_gnutls.so is too complex to describe here, see the wiki: #
+# ssl_gnutls is too complex to describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/ssl_gnutls #
-<module name="m_sslinfo.so">
+<module name="sslinfo">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
# if enabled. You must answer 'yes' in ./configure when asked or symlink
# the source for this module from the directory src/modules/extra, if
# you want to enable this, or it will not load.
-#<module name="m_ssl_openssl.so">
+#<module name="ssl_openssl">
#
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
# #
-# m_ssl_openssl.so is too complex to describe here, see the wiki: #
+# ssl_openssl is too complex to describe here, see the wiki: #
# http://wiki.inspircd.org/Modules/ssl_openssl #
-<module name="m_stripcolor.so">
-<module name="m_svshold.so">
-<module name="m_swhois.so">
-<module name="m_tline.so">
-<module name="m_uhnames.so">
-<module name="m_userip.so">
-<module name="m_watch.so">
+<module name="stripcolor">
+<module name="svshold">
+<module name="swhois">
+<module name="tline">
+<module name="uhnames">
+<module name="userip">
+<module name="watch">
<watch maxentries="32">
-<module name="m_spanningtree.so">
+<module name="spanningtree">
projects / user / henk / code / inspircd.git / commitdiff