From 457be34d00cc64be0b94cc7a22b074ab6cf88aa5 Mon Sep 17 00:00:00 2001 From: frostycoolslug Date: Tue, 26 Apr 2005 15:49:47 +0000 Subject: [PATCH] Old sh Version git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@1195 e03df62e-2008-0410-955e-edbf42e46eb7 --- configure | 587 ------------------------------------------------------ 1 file changed, 587 deletions(-) delete mode 100755 configure diff --git a/configure b/configure deleted file mode 100755 index e105d66b0..000000000 --- a/configure +++ /dev/null @@ -1,587 +0,0 @@ -#!/bin/sh -# InspIRCd Configuration Script -# -# Copyright 2003 The ChatSpike Development Team -# -# -# -# $Id$ -# -# -######################################## - -echo "Configuring default values..." - -ME=`pwd` -GCCVER=`gcc -dumpversion | cut -c 1` -GCC34=`gcc -dumpversion | cut -c 3` -CONFIG_DIR=$ME/conf -MODULE_DIR=$ME/modules -BINARY_DIR=$ME/bin -INSTALL=`which install` -OPTIMITEMP=0 -OPTIMISATI="-g" -MAX_CLIENT_T=`ulimit -n` -NICK_LENGT=32 -CHAN_LENGT=64 -MAX_CHANNE=20 -MAXI_MODES=20 -HAS_STRLCPY=0 -OSNAME=`(uname -s) 2>/dev/null` || OSNAME="unknown" - -if [ -z $MAX_CLIENT_T ] ; then - MAX_CLIENT_T=1024 - SCAN_FAILED=1 -fi - - -if [ "$1" = "-clean" -o "$2" = "-clean" ] ; then - `rm -rf .config.cache` -fi - -if [ -e ".config.cache" -a -z "$CLEAN" ] ; then - . .config.cache -fi - -if [ "$1" = "-update" -o "$2" = "-update" ] ; then - # They wanna update their Makefile.. good for 'em - # Make sure .config.cache exists - if [ ! -e ".config.cache" ] ; then - echo "You have not run ./configure before. Please do this before trying to run the update script." - exit 0 - fi - # Right, load the cache values - . .config.cache - # Check for modules - - case "$OSNAME" in - FreeBSD) - LDLIBS="-Ldl" - FLAGS="-fPIC -frtti $OPTIMISATI -Wcomment -Wformat -Wunused -Wshadow -Werror -Wswitch -Wchar-subscripts -Wparentheses -Woverloaded-virtual" - MAKEPROG="gmake" - ;; - *) - LDLIBS="-ldl" - FLAGS="-fPIC -frtti $OPTIMISATI -Wcomment -Wformat -Wunused -Wshadow -Werror -Wswitch -Wchar-subscripts -Wparentheses -Woverloaded-virtual" - MAKEPROG="make" - ;; - esac - - MODULES="" - for module in src/modules/*.cpp ; do - mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'` - MODULES="$MODULES $mod" - done - - # Write the new makefile. - for file in Makefile; do - echo -e "\033[0mWriting \033[1;32m$file\033[0m" - rm -f $file - sed -e " - s%@MAKEPROG@%$MAKEPROG%g - s%@FLAGS@%$FLAGS%g - s%@LDLIBS@%$LDLIBS%g - s%@CONFIG_DIR@%$CONFIG_DIR%g - s%@MODULE_DIR@%$MODULE_DIR%g - s%@BINARY_DIR@%$BINARY_DIR%g - s%@MODULES@%$MODULES%g - " .${file}.inc >> $file - done - echo -e "\033[0mWriting \033[1;32msrc/modules/Makefile\033[0m" - rm -f src/modules/Makefile - - # Generate the Header.. - - echo "# (C) ChatSpike development team" >> src/modules/Makefile - echo "# Makefile by " >> src/modules/Makefile - echo "# Many Thanks to Andrew Church " >> src/modules/Makefile - echo "# for assisting with making this work right." >> src/modules/Makefile - echo "#" >> src/modules/Makefile - echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile - echo "# please run ./configure --update" >> src/modules/Makefile - echo "" >> src/modules/Makefile - echo "all: \$(MODULES)" >> src/modules/Makefile - echo "" >> src/modules/Makefile - - - for module in src/modules/*.cpp ; do - flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'` - mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'` - mod2=`echo $module | sed 's/src\/modules\///'` - echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile - echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile - echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile - echo "" >> src/modules/Makefile - done - - - echo "Complete." - exit 1; -fi - - -if [ -z $MAX_CLIENT ] ; then - MAX_CLIENT=$MAX_CLIENT_T -fi - - -c="" -n="" -if [ "`eval echo -e -n 'a'`" = "-n a" ] ; then - c="\c" -else - n="-n" -fi - -exists () { # because some shells don't have test -e - if [ -f $1 -o -d $1 -o -p $1 -o -c $1 -o -b $1 ] ; then - return 0 - else - return 1 - fi -} - -echo "#include ">.test.cpp -echo "#include ">>.test.cpp -echo "int main() { char a[10]; char b[10]; strlcpy(a,b,10); printf(\"%d\\n\",9); }" >>.test.cpp -g++ -o .test .test.cpp 2>&1 -if [ -e ".test" ] ; then - HAS_STRLCPY=1 -fi -rm -f .test.cpp .test - -clear -echo -e "'\033[1;33m####\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::'\033[1;33m####\033[0m:'\033[1;33m########\033[0m:::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::" -echo -e ". \033[1;33m##\033[0m:: \033[1;33m###\033[0m:: \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:. \033[1;33m##\033[0m:: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:" -echo -e ": \033[1;33m##\033[0m:: \033[1;33m####\033[0m: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:" -echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m \033[1;33m##\033[0m \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::: \033[1;33m##\033[0m:: \033[1;33m########\033[0m:: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:" -echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m. \033[1;33m####\033[0m::..... \033[1;33m##\033[0m: \033[1;33m##\033[0m.....:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m.. \033[1;33m##\033[0m::: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:" -echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m:. \033[1;33m###\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m::::::::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:: \033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:" -echo -e "'\033[1;33m####\033[0m: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m##\033[0m::::::::'\033[1;33m####\033[0m: \033[1;33m##\033[0m:::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::" -echo -e "\033[0m\033[0m....::..::::..:::......:::..:::::::::....::..:::::..:::......:::........:::" -echo "" -echo "Welcome to the InspIRCd Configuration program!" -echo "" -echo "*** If you are unsure of any of these values, leave it blank for ***" -echo "*** standard settings that will work, and your server will run ***" -echo "*** using them. If you are running this server as part of a ***" -echo "*** larger network, you must consult with your network admins ***" -echo "*** for the proper values to use, or server links will be unstable! ***" -echo "" -echo -e "Press \033[1m\033[0m to accept the default for any option, or enter" -echo -e "a new value. Please note: You will \033[1mHAVE\033[0m to read the docs" -echo -e "dir, otherwise you won't have a config file!" -echo "" -echo -e "Your operating system is: \033[1;32m$OSNAME\033[0m (`uname -mnr`), fdmax: $MAX_CLIENT_T" -echo "" - -############################################################################# - - ok=0 - asked=1 - echo "In what directory are the configuration files?" - while [ $ok -eq 0 ] ; do - echo -e $n "[\033[1;32m$CONFIG_DIR\033[0m] -> $c" - if read INPUT ; then : ; else echo "" ; exit 1 ; fi - if [ ! "$INPUT" ] ; then - INPUT=$CONFIG_DIR - default=1 - fi - if echo "$INPUT" | grep -q \[\'\"\\\] ; then - echo 'Please use a pathname without the characters: '\'' " \' - elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then - if exists "$INPUT" ; then - echo "$INPUT exists, but is not a directory!" - else - echo "$INPUT does not exist. Create it?" - echo -e $n "[\033[1;32my\033[0m] $c" - read YN - if [ "$YN" != "n" ] ; then - if mkdir -p "$INPUT" ; then - ok=1 - fi - fi - fi - else - ok=1 - fi - done - CONFIG_DIR=$INPUT - echo "" - - -############################################################################## - - ok=0 - asked=1 - echo "In What directory are the modules to be compiled to?" - while [ $ok -eq 0 ] ; do - echo -e $n "[\033[1;32m$MODULE_DIR\033[0m] -> $c" - if read INPUT ; then : ; else echo "" ; exit 1 ; fi - if [ ! "$INPUT" ] ; then - INPUT=$MODULE_DIR - default=1 - fi - if echo "$INPUT" | grep -q \[\'\"\\\] ; then - echo 'Please use a pathname without the characters: '\'' " \' - elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then - if exists "$INPUT" ; then - echo "$INPUT exists, but is not a directory!" - else - echo "$INPUT does not exist. Create it?" - echo -e $n "[\033[1;32my\033[0m] $c" - read YN - if [ "$YN" != "n" ] ; then - if mkdir -p "$INPUT" ; then - ok=1 - fi - fi - fi - else - ok=1 - fi - done - MODULE_DIR=$INPUT - echo "" - - -############################################################################## - - ok=0 - asked=1 - echo "In what directory is the IRCd binary to be placed?" - while [ $ok -eq 0 ] ; do - echo -e $n "[\033[1;32m$BINARY_DIR\033[0m] -> $c" - if read INPUT ; then : ; else echo "" ; exit 1 ; fi - if [ ! "$INPUT" ] ; then - INPUT=$BINARY_DIR - default=1 - fi - if echo "$INPUT" | grep -q \[\'\"\\\] ; then - echo 'Please use a pathname without the characters: '\'' " \' - elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then - if exists "$INPUT" ; then - echo "$INPUT exists, but is not a directory!" - else - echo "$INPUT does not exist. Create it?" - echo -e $n "[\033[1;32my\033[0m] $c" - read YN - if [ "$YN" != "n" ] ; then - if mkdir -p "$INPUT" ; then - ok=1 - fi - fi - fi - else - ok=1 - fi - done - BINARY_DIR=$INPUT - echo "" - -############################################################################### -# Craigs Version 3 With slightly less Cheeze :p - -cheeze=0 -echo -e "Maximum number of clients at any one time (\033[1;32m1-$MAX_CLIENT_T\033[0m)?" -while [ "$cheeze" -eq "0" ] ; do - echo -e $n "[\033[1;32m$MAX_CLIENT\033[0m] -> $c" - read cc - - if [ -z "$cc" ] ; then - cc=$MAX_CLIENT - fi - - case "$cc" in - [0-9]*) - if [ "$cc" -gt "$MAX_CLIENT_T" -a -z "$SCAN_FAILED" ] ; then - echo -e "WARNING: Our scans have indicated that you are attempting" - echo -e "to use more sockets than there are avaliable. Are you sure" - echo -e "you wish to do this? It may cause the IRCd to malfunction [y/n]" - echo -e $n "[\033[1;32mn\033[0m] -> $c" - read YN - if [ "$YN" = "y" ] ; then - MAX_CLIENT=$cc - cheeze=1 - else - echo "" - echo -e "Please enter the correct value (\033[1;32m1-$MAX_CLIENT_T\033[0m)" - fi - else - echo $SCAN_FAILED - cheeze=1 - MAX_CLIENT=$cc - fi - ;; - *) - echo "" - echo "You must enter a number in this field. Please try again." - ;; - esac -done -echo "" - - -############################################################################### - - cheeze=0 - echo -e "What is the Maximum length of nicknames?" - while [ "$cheeze" -eq "0" ] ; do - echo -e $n "[\033[1;32m$NICK_LENGT\033[0m] -> $c" - read cc - if [ "$cc" ] ; then - case "$cc" in - [0-9]*) - NICK_LENGT=$cc - cheeze=1 - ;; - *) - echo "" - echo "You Must Enter a Number in this field. Please Try Again." - cheeze=0 - ;; - esac - else - cheeze=1 - fi - done - echo "" - -############################################################################### - - cheeze=0 - echo -e "What is the Maximum length of channel names?" - while [ "$cheeze" -eq "0" ] ; do - echo -e $n "[\033[1;32m$MAX_CHANNE\033[0m] -> $c" - read cc - if [ "$cc" ] ; then - case "$cc" in - [0-9]*) - MAX_CHANNE=$cc - cheeze=1 - ;; - *) - echo "" - echo "You Must Enter a Number in this field. Please Try Again." - cheeze=0 - ;; - esac - else - cheeze=1 - fi - done - echo "" - -############################################################################### - - cheeze=0 - echo -e "What is the Maximum number of mode changes in one line?" - while [ "$cheeze" -eq "0" ] ; do - echo -e $n "[\033[1;32m$MAXI_MODES\033[0m] -> $c" - read cc - if [ "$cc" ] ; then - case "$cc" in - [0-9]*) - MAXI_MODES=$cc - cheeze=1 - ;; - *) - echo "" - echo "You Must Enter a Number in this field. Please Try Again." - cheeze=0 - ;; - esac - else - cheeze=1 - fi - done - echo "" - -############################################################################### -# Code Optimisation? - - cheeze=0 - echo -e "Enter the Level Of Binary optimisation. This is a number between 0 and 3 (inclusive)" - echo -e "The InspIRCd Team will _NOT_ support any bug reports above 0." - echo -e "Also note, the IRCd behaviour will be different depending on this value." - echo -e "Please read the documentation for more information." - echo -e "" - echo -e "The Higher the number, the more optimised your binary will be. This value will default to 0" - echo -e "If you either a) Dont enter a number, or b) Enter a value outside the range." - echo -e $n "[\033[1;32m$OPTIMITEMP\033[0m] -> $c" - read cc - if [ -z "$cc" ] ; then - cc=$OPTIMITEMP - fi - case "$cc" in - 1) - OPTIMITEMP=1 - OPTIMISATI="-O" - ;; - 2) - OPTIMITEMP=2 - OPTIMISATI="-O2" - ;; - 3) - OPTIMITEMP=3 - OPTIMISATI="-O3" - ;; - *) - OPTIMITEMP=0 - OPTIMISATI="-g" - ;; - esac - echo "" - -############################################################################### - - -echo -e "\033[1;32mPre-build configuration is complete!\033[0m" -echo "" -echo -e "\033[0mConfig path:\033[1;32m\t\t\t$CONFIG_DIR" -echo -e "\033[0mModule path:\033[1;32m\t\t\t$MODULE_DIR" -echo -e "\033[0mMax connections:\033[1;32m\t\t$MAX_CLIENT" -echo -e "\033[0mMax User Channels\033[1;32m\t\t$MAX_CHANNE" -echo -e "\033[0mMax nickname length:\033[1;32m\t\t$NICK_LENGT" -echo -e "\033[0mMax channel length:\033[1;32m\t\t$CHAN_LENGT" -echo -e "\033[0mMax mode length:\033[1;32m\t\t$MAXI_MODES" -echo -e "\033[0mGCC Version Found:\033[1;32m\t\t$GCCVER.$GCC34" -echo -e "\033[0mOptimatizaton Flag:\033[1;32m\t\t$OPTIMISATI" -echo -e "\033[0m" - -echo "Writing cache file for future ./configures ..." - -COPY_CONF=0 -if [ "$CONFIG_DIR" != "$ME/conf" ] ; then - COPY_CONF=1 -fi - - -if [ -e ".config.cache" ] ; then - rm .config.cache -fi -echo "CONFIG_DIR=\"$CONFIG_DIR\"" >> .config.cache -echo "MODULE_DIR=\"$MODULE_DIR\"" >> .config.cache -echo "BINARY_DIR=\"$BINARY_DIR\"" >> .config.cache -echo "MAX_CLIENT=\"$MAX_CLIENT\"" >> .config.cache -echo "MAX_CHANNE=\"$MAX_CHANNE\"" >> .config.cache -echo "NICK_LENGT=\"$NICK_LENGT\"" >> .config.cache -echo "MAXI_MODES=\"$MAXI_MODES\"" >> .config.cache -echo "OPTIMITEMP=\"$OPTIMITEMP\"" >> .config.cache -echo "OPTIMISATI=\"$OPTIMISATI\"" >> .config.cache -echo "GCC34=\"$GCC34\"" >> .config.cache -echo "HAS_STRLCPY=\"$HAS_STRLCPY\"" >> .config.cache -echo "COPY_CONF=\"$COPY_CONF\"" >> .config.cache - -echo -e "Writing \033[1;32minspircd_config.h" - -echo "/* Auto generated by configure, do not modify! */" >include/inspircd_config.h -echo "" >>include/inspircd_config.h -if [ "$GCCVER" -eq "3" ] ; then -echo "#define GCC3" >>include/inspircd_config.h - if [ "$GCC34" -gt "3" ] ; then - echo "#define GCC34" >>include/inspircd_config.h - fi -fi -if [ "$HAS_STRLCPY" -eq "1" ] ; then - echo "#define HAS_STRLCPY" >>include/inspircd_config.h -fi -echo "#define SYSLOG_FACILITY LOG_DAEMON" >>include/inspircd_config.h -echo "#define SYSLOG_LEVEL LOG_NOTICE" >>include/inspircd_config.h -echo "#define CONFIG_FILE \"$CONFIG_DIR/inspircd.conf\"" >>include/inspircd_config.h -echo "#define MOD_PATH \"$MODULE_DIR\"" >>include/inspircd_config.h -echo "#define VERSION \"`sh ./src/version.sh`\"" >>include/inspircd_config.h -echo "#define MAXCLIENTS $MAX_CLIENT" >>include/inspircd_config.h -echo "#define NICKMAX $NICK_LENGT" >>include/inspircd_config.h -echo "#define CHANMAX $CHAN_LENGT" >>include/inspircd_config.h -echo "#define MAXCHANS $MAX_CHANNE" >>include/inspircd_config.h -echo "#define MAXMODES $MAXI_MODES" >>include/inspircd_config.h -echo "#define OPTIMISATION $OPTIMITEMP" >>include/inspircd_config.h -echo "#define SYSTEM \"`uname -n -s -r`\"" >>include/inspircd_config.h -echo "#define MAXBUF 514">>include/inspircd_config.h -touch include/inspircd_config.h - -case "$OSNAME" in - FreeBSD) - LDLIBS="-Ldl" - FLAGS="-fPIC -frtti $OPTIMISATI" - MAKEPROG="gmake" - ;; - *) - LDLIBS="-ldl" - FLAGS="-fPIC -frtti $OPTIMISATI" - MAKEPROG="make" - ;; -esac - -MODULES="" -for module in src/modules/*.cpp ; do - mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'` - MODULES="$MODULES $mod" -done - -for file in Makefile inspircd; do - echo -e "\033[0mWriting \033[1;32m$file\033[0m" - rm -f $file - sed -e " - s%@MAKEPROG@%$MAKEPROG%g - s%@FLAGS@%$FLAGS%g - s%@LDLIBS@%$LDLIBS%g - s%@CONFIG_DIR@%$CONFIG_DIR%g - s%@MODULE_DIR@%$MODULE_DIR%g - s%@BINARY_DIR@%$BINARY_DIR%g - s%@MODULES@%$MODULES%g - " .${file}.inc >> $file -done -`chmod 700 inspircd` - -echo -e "\033[0mWriting \033[1;32msrc/modules/Makefile\033[0m" -rm -f src/modules/Makefile - -# Generate the Header.. - -echo "# (C) ChatSpike development team" >> src/modules/Makefile -echo "# Makefile by " >> src/modules/Makefile -echo "# Many Thanks to Andrew Church " >> src/modules/Makefile -echo "# for assisting with making this work right." >> src/modules/Makefile -echo "#" >> src/modules/Makefile -echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile -echo "# please run ./configure --update" >> src/modules/Makefile -echo "" >> src/modules/Makefile -echo "all: \$(MODULES)" >> src/modules/Makefile -echo "" >> src/modules/Makefile - -for module in src/modules/*.cpp ; do - flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'` - mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'` - mod2=`echo $module | sed 's/src\/modules\///'` - echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile - echo " \$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile - echo " @cp $mod \$(MODPATH)/" >> src/modules/Makefile - echo "" >> src/modules/Makefile -done - - -echo "" - -echo "" -echo "Do you want to compile the IRCd binaries?" -echo -e $n "[\033[1;32my\033[0m] $c" -read YN -if [ "$YN" != "n" ] ; then - echo "" - echo -e "\033[1;32mCompiling...\033[0m" - echo "" - cd $ME - $MAKEPROG - echo "" - echo "Done!" -else - echo "" - echo -e "To build your server with these settings, please type '\033[1;32m$MAKEPROG\033[0m' now." -fi - - -echo "" -echo -e "*** \033[1;32mRemember to edit your configuration files!!!\033[0m ***" -echo "" -- 2.39.5