Old sh Version

git-svn-id: http://svn.inspircd.org/repository/trunk/inspircd@1195 e03df62e-2008-0410-955e-edbf42e46eb7

1 files changed, 0 insertions, 587 deletions

diff --git a/configure b/configure
deleted file mode 100755
index e105d66b0..000000000
--- a/configure
+++ /dev/null
@@ -1,587 +0,0 @@
-#!/bin/sh
-# InspIRCd Configuration Script
-#
-# Copyright 2003 The ChatSpike Development Team
-# <brain@chatspike.net>
-# <Craig@chatspike.net>
-#
-# $Id$
-#
-#
-########################################
-
-echo "Configuring default values..."
-
-ME=`pwd`
-GCCVER=`gcc -dumpversion | cut -c 1`
-GCC34=`gcc -dumpversion | cut -c 3`
-CONFIG_DIR=$ME/conf
-MODULE_DIR=$ME/modules
-BINARY_DIR=$ME/bin
-INSTALL=`which install`
-OPTIMITEMP=0
-OPTIMISATI="-g"
-MAX_CLIENT_T=`ulimit -n`
-NICK_LENGT=32
-CHAN_LENGT=64
-MAX_CHANNE=20
-MAXI_MODES=20
-HAS_STRLCPY=0
-OSNAME=`(uname -s) 2>/dev/null` || OSNAME="unknown"
-
-if [ -z $MAX_CLIENT_T ] ; then
-        MAX_CLIENT_T=1024
-        SCAN_FAILED=1
-fi
-
-
-if [ "$1" = "-clean" -o "$2" = "-clean" ] ; then
-  `rm -rf .config.cache`
-fi
-
-if [ -e ".config.cache" -a -z "$CLEAN" ] ; then
-    . .config.cache 
-fi
-
-if [ "$1" = "-update" -o "$2" = "-update" ] ; then
-   # They wanna update their Makefile.. good for 'em
-   # Make sure .config.cache exists
-   if [ ! -e ".config.cache" ] ; then
-     echo "You have not run ./configure before. Please do this before trying to run the update script."
-     exit 0
-   fi
-   # Right, load the cache values
-   . .config.cache
-   # Check for modules
-
-   case "$OSNAME" in
-           FreeBSD)
-                   LDLIBS="-Ldl"
-                   FLAGS="-fPIC -frtti $OPTIMISATI -Wcomment -Wformat -Wunused -Wshadow -Werror -Wswitch -Wchar-subscripts -Wparentheses -Woverloaded-virtual"
-                   MAKEPROG="gmake"
-                   ;;
-           *)
-                   LDLIBS="-ldl"
-                   FLAGS="-fPIC -frtti $OPTIMISATI -Wcomment -Wformat -Wunused -Wshadow -Werror -Wswitch -Wchar-subscripts -Wparentheses -Woverloaded-virtual"
-                   MAKEPROG="make"
-                   ;;
-   esac
-
-   MODULES=""
-   for module in src/modules/*.cpp ; do
-           mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
-           MODULES="$MODULES $mod"
-   done
-
-   # Write the new makefile.
-   for file in Makefile; do
-          echo -e "\033[0mWriting \033[1;32m$file\033[0m"
-          rm -f $file
-          sed -e "
-                  s%@MAKEPROG@%$MAKEPROG%g
-                  s%@FLAGS@%$FLAGS%g
-                  s%@LDLIBS@%$LDLIBS%g
-                  s%@CONFIG_DIR@%$CONFIG_DIR%g
-                  s%@MODULE_DIR@%$MODULE_DIR%g
-                  s%@BINARY_DIR@%$BINARY_DIR%g
-                  s%@MODULES@%$MODULES%g
-          " .${file}.inc >> $file
-   done
-   echo -e "\033[0mWriting \033[1;32msrc/modules/Makefile\033[0m"
-   rm -f src/modules/Makefile
-
-   # Generate the Header..
-
-   echo "# (C) ChatSpike development team" >> src/modules/Makefile
-   echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
-   echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
-   echo "#    for assisting with making this work right." >> src/modules/Makefile
-   echo "#" >> src/modules/Makefile
-   echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
-   echo "# please run ./configure --update" >> src/modules/Makefile
-   echo "" >> src/modules/Makefile
-   echo "all: \$(MODULES)" >> src/modules/Makefile
-   echo "" >> src/modules/Makefile
-
-
-   for module in src/modules/*.cpp ; do
-        flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
-        mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
-	mod2=`echo $module | sed 's/src\/modules\///'`
-        echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile
-        echo "	\$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
-	echo "	@cp $mod \$(MODPATH)/" >> src/modules/Makefile
-        echo "" >> src/modules/Makefile
-   done
-
-
-   echo "Complete."
-   exit 1; 
-fi
-
-
-if [ -z $MAX_CLIENT ] ; then
-        MAX_CLIENT=$MAX_CLIENT_T
-fi
-
-
-c=""
-n=""
-if [ "`eval echo -e -n 'a'`" = "-n a" ] ; then
-        c="\c"
-else
-        n="-n"
-fi
-
-exists () { # because some shells don't have test -e
-    if [ -f $1 -o -d $1 -o -p $1 -o -c $1 -o -b $1 ] ; then
-	return 0
-    else
-	return 1
-    fi
-}
-
-echo "#include <string.h>">.test.cpp
-echo "#include <stdio.h>">>.test.cpp
-echo "int main() { char a[10]; char b[10]; strlcpy(a,b,10); printf(\"%d\\n\",9); }" >>.test.cpp
-g++ -o .test .test.cpp 2>&1
-if [ -e ".test" ] ; then
-	HAS_STRLCPY=1
-fi 
-rm -f .test.cpp .test
-
-clear
-echo -e "'\033[1;33m####\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::'\033[1;33m####\033[0m:'\033[1;33m########\033[0m:::'\033[1;33m######\033[0m::'\033[1;33m########\033[0m::"
-echo -e ". \033[1;33m##\033[0m:: \033[1;33m###\033[0m:: \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:. \033[1;33m##\033[0m:: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:'\033[1;33m##\033[0m... \033[1;33m##\033[0m: \033[1;33m##\033[0m.... \033[1;33m##\033[0m:"
-echo -e ": \033[1;33m##\033[0m:: \033[1;33m####\033[0m: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::..:: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
-echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m \033[1;33m##\033[0m \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::: \033[1;33m##\033[0m:: \033[1;33m########\033[0m:: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
-echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m. \033[1;33m####\033[0m::..... \033[1;33m##\033[0m: \033[1;33m##\033[0m.....:::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m.. \033[1;33m##\033[0m::: \033[1;33m##\033[0m::::::: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
-echo -e ": \033[1;33m##\033[0m:: \033[1;33m##\033[0m:. \033[1;33m###\033[0m:'\033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m::::::::: \033[1;33m##\033[0m:: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:: \033[1;33m##\033[0m::: \033[1;33m##\033[0m: \033[1;33m##\033[0m:::: \033[1;33m##\033[0m:"
-echo -e "'\033[1;33m####\033[0m: \033[1;33m##\033[0m::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m##\033[0m::::::::'\033[1;33m####\033[0m: \033[1;33m##\033[0m:::. \033[1;33m##\033[0m:. \033[1;33m######\033[0m:: \033[1;33m########\033[0m::"
-echo -e "\033[0m\033[0m....::..::::..:::......:::..:::::::::....::..:::::..:::......:::........:::"
-echo ""
-echo "Welcome to the InspIRCd Configuration program!"
-echo ""
-echo "*** If you are unsure of any of these values, leave it blank for    ***"
-echo "*** standard settings that will work, and your server will run      ***"
-echo "*** using them. If you are running this server as part of a         ***"
-echo "*** larger network, you must consult with your network admins       ***"
-echo "*** for the proper values to use, or server links will be unstable! ***"
-echo ""
-echo -e "Press \033[1m<RETURN>\033[0m to accept the default for any option, or enter"
-echo -e "a new value. Please note: You will \033[1mHAVE\033[0m to read the docs"
-echo -e "dir, otherwise you won't have a config file!"
-echo ""
-echo -e "Your operating system is: \033[1;32m$OSNAME\033[0m (`uname -mnr`), fdmax: $MAX_CLIENT_T"
-echo ""
-
-#############################################################################
-
-    ok=0
-    asked=1
-    echo "In what directory are the configuration files?"
-    while [ $ok -eq 0 ] ; do
-	echo -e $n "[\033[1;32m$CONFIG_DIR\033[0m] -> $c"
-	if read INPUT ; then : ; else echo "" ; exit 1 ; fi
-	if [ ! "$INPUT" ] ; then
-	    INPUT=$CONFIG_DIR
-	    default=1
-	fi
-	if echo "$INPUT" | grep -q \[\'\"\\\] ; then
-	    echo 'Please use a pathname without the characters: '\'' " \'
-	elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
-	    if exists "$INPUT" ; then
-		echo "$INPUT exists, but is not a directory!"
-	    else
-		echo "$INPUT does not exist.  Create it?"
-		echo -e $n "[\033[1;32my\033[0m] $c"
-		read YN
-		if [ "$YN" != "n" ] ; then
-		    if mkdir -p "$INPUT" ; then
-			ok=1
-		    fi
-		fi
-	    fi
-	    else
-            ok=1
-	fi
-    done
-    CONFIG_DIR=$INPUT
-    echo ""
-
-
-##############################################################################
-
-    ok=0
-    asked=1
-    echo "In What directory are the modules to be compiled to?"
-    while [ $ok -eq 0 ] ; do
-        echo -e $n "[\033[1;32m$MODULE_DIR\033[0m] -> $c"
-        if read INPUT ; then : ; else echo "" ; exit 1 ; fi
-        if [ ! "$INPUT" ] ; then
-            INPUT=$MODULE_DIR
-            default=1
-        fi
-        if echo "$INPUT" | grep -q \[\'\"\\\] ; then
-            echo 'Please use a pathname without the characters: '\'' " \'
-        elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
-            if exists "$INPUT" ; then
-                echo "$INPUT exists, but is not a directory!"
-            else
-                echo "$INPUT does not exist.  Create it?"
-                echo -e $n "[\033[1;32my\033[0m] $c"
-                read YN
-                if [ "$YN" != "n" ] ; then
-                    if mkdir -p "$INPUT" ; then
-                        ok=1
-                    fi
-                fi
-            fi
-            else
-            ok=1
-        fi
-    done
-    MODULE_DIR=$INPUT
-    echo ""
-
-
-##############################################################################
-
-    ok=0
-    asked=1
-    echo "In what directory is the IRCd binary to be placed?"
-    while [ $ok -eq 0 ] ; do
-        echo -e $n "[\033[1;32m$BINARY_DIR\033[0m] -> $c"
-        if read INPUT ; then : ; else echo "" ; exit 1 ; fi
-        if [ ! "$INPUT" ] ; then
-            INPUT=$BINARY_DIR
-            default=1
-        fi
-        if echo "$INPUT" | grep -q \[\'\"\\\] ; then
-            echo 'Please use a pathname without the characters: '\'' " \'
-        elif [ ! "$NO_DIR_CHECK" -a ! -d "$INPUT" ] ; then
-            if exists "$INPUT" ; then
-                echo "$INPUT exists, but is not a directory!"
-            else
-                echo "$INPUT does not exist.  Create it?"
-                echo -e $n "[\033[1;32my\033[0m] $c"
-                read YN
-                if [ "$YN" != "n" ] ; then
-                    if mkdir -p "$INPUT" ; then
-                        ok=1
-                    fi
-                fi
-            fi
-            else
-            ok=1
-        fi
-    done
-    BINARY_DIR=$INPUT
-    echo ""
-
-###############################################################################
-# Craigs Version 3 With slightly less Cheeze :p
-
-cheeze=0
-echo -e "Maximum number of clients at any one time (\033[1;32m1-$MAX_CLIENT_T\033[0m)?"
-while [ "$cheeze" -eq "0" ] ; do
-	echo -e $n "[\033[1;32m$MAX_CLIENT\033[0m] -> $c"
-        read cc
-
-        if [ -z "$cc" ] ; then
-		cc=$MAX_CLIENT
-	fi
-
-	case "$cc" in 
-		[0-9]*)
-			if [ "$cc" -gt "$MAX_CLIENT_T" -a -z "$SCAN_FAILED" ] ; then
-				echo -e "WARNING: Our scans have indicated that you are attempting"
-				echo -e "to use more sockets than there are avaliable. Are you sure"
-				echo -e "you wish to do this? It may cause the IRCd to malfunction [y/n]"
-				echo -e $n "[\033[1;32mn\033[0m] -> $c"
-				read YN
-				if [ "$YN" = "y" ] ; then
-					MAX_CLIENT=$cc
-					cheeze=1
-				else
-					echo ""
-					echo -e "Please enter the correct value (\033[1;32m1-$MAX_CLIENT_T\033[0m)"
-				fi
-			else
-				echo $SCAN_FAILED
-				cheeze=1
-				MAX_CLIENT=$cc
-			fi
-			;;
-		*)
-			echo ""
-			echo "You must enter a number in this field. Please try again."
-			;;
-	esac
-done
-echo ""
-
-
-###############################################################################
-
-  cheeze=0
-  echo -e "What is the Maximum length of nicknames?"
-  while [ "$cheeze" -eq "0" ] ; do
-        echo -e $n "[\033[1;32m$NICK_LENGT\033[0m] -> $c"
-        read cc
-        if [ "$cc" ] ; then
-                case "$cc" in
-                        [0-9]*)
-                        NICK_LENGT=$cc
-                        cheeze=1
-                        ;;
-                        *)
-                        echo ""
-                        echo "You Must Enter a Number in this field. Please Try Again."
-                        cheeze=0
-                        ;;
-                esac
-        else
-                cheeze=1
-        fi
-  done
-  echo ""
-
-###############################################################################
-
-  cheeze=0
-  echo -e "What is the Maximum length of channel names?"
-  while [ "$cheeze" -eq "0" ] ; do
-        echo -e $n "[\033[1;32m$MAX_CHANNE\033[0m] -> $c"
-        read cc
-        if [ "$cc" ] ; then
-                case "$cc" in
-                        [0-9]*)
-                        MAX_CHANNE=$cc
-                        cheeze=1
-                        ;;
-                        *)
-                        echo ""
-                        echo "You Must Enter a Number in this field. Please Try Again."
-                        cheeze=0
-                        ;;
-                esac
-        else
-                cheeze=1
-        fi
-  done
-  echo ""
-
-###############################################################################
-
-  cheeze=0
-  echo -e "What is the Maximum number of mode changes in one line?"
-  while [ "$cheeze" -eq "0" ] ; do
-        echo -e $n "[\033[1;32m$MAXI_MODES\033[0m] -> $c"
-        read cc
-        if [ "$cc" ] ; then
-                case "$cc" in
-                        [0-9]*)
-                        MAXI_MODES=$cc
-                        cheeze=1
-                        ;;
-                        *)
-                        echo ""
-                        echo "You Must Enter a Number in this field. Please Try Again."
-                        cheeze=0
-                        ;;
-                esac
-        else
-                cheeze=1
-        fi
-  done
-  echo ""
-
-###############################################################################
-# Code Optimisation?
-
-  cheeze=0
-  echo -e "Enter the Level Of Binary optimisation. This is a number between 0 and 3 (inclusive)"
-  echo -e "The InspIRCd Team will _NOT_ support any bug reports above 0."
-  echo -e "Also note, the IRCd behaviour will be different depending on this value."
-  echo -e "Please read the documentation for more information."
-  echo -e ""
-  echo -e "The Higher the number, the more optimised your binary will be. This value will default to 0"
-  echo -e "If you either a) Dont enter a number, or b) Enter a value outside the range."
-  echo -e $n "[\033[1;32m$OPTIMITEMP\033[0m] -> $c"
-  read cc
-  if [ -z "$cc" ] ; then
-	cc=$OPTIMITEMP
-  fi
-  case "$cc" in
-        1)
-                OPTIMITEMP=1
-		OPTIMISATI="-O"
-                ;;
-	2)
-		OPTIMITEMP=2
-		OPTIMISATI="-O2"
-		;;
-	3)
-		OPTIMITEMP=3
-		OPTIMISATI="-O3"
-		;;
-	*)
-                OPTIMITEMP=0
-                OPTIMISATI="-g"
-                ;;
-  esac
-  echo ""
-
-###############################################################################
-
-
-echo -e "\033[1;32mPre-build configuration is complete!\033[0m"
-echo ""
-echo -e "\033[0mConfig path:\033[1;32m\t\t\t$CONFIG_DIR"
-echo -e "\033[0mModule path:\033[1;32m\t\t\t$MODULE_DIR"
-echo -e "\033[0mMax connections:\033[1;32m\t\t$MAX_CLIENT"
-echo -e "\033[0mMax User Channels\033[1;32m\t\t$MAX_CHANNE"
-echo -e "\033[0mMax nickname length:\033[1;32m\t\t$NICK_LENGT"
-echo -e "\033[0mMax channel length:\033[1;32m\t\t$CHAN_LENGT"
-echo -e "\033[0mMax mode length:\033[1;32m\t\t$MAXI_MODES"
-echo -e "\033[0mGCC Version Found:\033[1;32m\t\t$GCCVER.$GCC34"
-echo -e "\033[0mOptimatizaton Flag:\033[1;32m\t\t$OPTIMISATI"
-echo -e "\033[0m"
-
-echo "Writing cache file for future ./configures ..."
-
-COPY_CONF=0
-if [ "$CONFIG_DIR" != "$ME/conf" ] ; then
-    COPY_CONF=1
-fi
-
-
-if [ -e ".config.cache" ] ; then
-	rm .config.cache
-fi
-echo "CONFIG_DIR=\"$CONFIG_DIR\"" >> .config.cache
-echo "MODULE_DIR=\"$MODULE_DIR\"" >> .config.cache
-echo "BINARY_DIR=\"$BINARY_DIR\"" >> .config.cache
-echo "MAX_CLIENT=\"$MAX_CLIENT\"" >> .config.cache
-echo "MAX_CHANNE=\"$MAX_CHANNE\"" >> .config.cache
-echo "NICK_LENGT=\"$NICK_LENGT\"" >> .config.cache
-echo "MAXI_MODES=\"$MAXI_MODES\"" >> .config.cache 
-echo "OPTIMITEMP=\"$OPTIMITEMP\"" >> .config.cache
-echo "OPTIMISATI=\"$OPTIMISATI\"" >> .config.cache
-echo "GCC34=\"$GCC34\"" >> .config.cache
-echo "HAS_STRLCPY=\"$HAS_STRLCPY\"" >> .config.cache
-echo "COPY_CONF=\"$COPY_CONF\"" >> .config.cache
-
-echo -e "Writing \033[1;32minspircd_config.h"
-
-echo "/* Auto generated by configure, do not modify! */" >include/inspircd_config.h
-echo "" >>include/inspircd_config.h
-if [ "$GCCVER" -eq "3" ] ; then
-echo "#define GCC3" >>include/inspircd_config.h
-	if [ "$GCC34" -gt "3" ] ; then
-		echo "#define GCC34" >>include/inspircd_config.h
-	fi
-fi
-if [ "$HAS_STRLCPY" -eq "1" ] ; then
-	echo "#define HAS_STRLCPY" >>include/inspircd_config.h
-fi
-echo "#define SYSLOG_FACILITY LOG_DAEMON" >>include/inspircd_config.h
-echo "#define SYSLOG_LEVEL LOG_NOTICE" >>include/inspircd_config.h
-echo "#define CONFIG_FILE \"$CONFIG_DIR/inspircd.conf\"" >>include/inspircd_config.h
-echo "#define MOD_PATH \"$MODULE_DIR\"" >>include/inspircd_config.h
-echo "#define VERSION \"`sh ./src/version.sh`\"" >>include/inspircd_config.h
-echo "#define MAXCLIENTS $MAX_CLIENT" >>include/inspircd_config.h
-echo "#define NICKMAX $NICK_LENGT" >>include/inspircd_config.h
-echo "#define CHANMAX $CHAN_LENGT" >>include/inspircd_config.h
-echo "#define MAXCHANS $MAX_CHANNE" >>include/inspircd_config.h
-echo "#define MAXMODES $MAXI_MODES" >>include/inspircd_config.h
-echo "#define OPTIMISATION $OPTIMITEMP" >>include/inspircd_config.h
-echo "#define SYSTEM \"`uname -n -s -r`\"" >>include/inspircd_config.h
-echo "#define MAXBUF 514">>include/inspircd_config.h
-touch include/inspircd_config.h
-
-case "$OSNAME" in
-	FreeBSD)
-		LDLIBS="-Ldl"
-		FLAGS="-fPIC -frtti $OPTIMISATI"
-		MAKEPROG="gmake"
-		;;
-	*)
-		LDLIBS="-ldl"
-		FLAGS="-fPIC -frtti $OPTIMISATI"
-		MAKEPROG="make"
-		;;
-esac
-
-MODULES=""
-for module in src/modules/*.cpp ; do
-        mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
-	MODULES="$MODULES $mod" 
-done
-
-for file in Makefile inspircd; do
-	echo -e "\033[0mWriting \033[1;32m$file\033[0m"
-	rm -f $file
-	sed -e "
-		s%@MAKEPROG@%$MAKEPROG%g
-		s%@FLAGS@%$FLAGS%g
-		s%@LDLIBS@%$LDLIBS%g
-		s%@CONFIG_DIR@%$CONFIG_DIR%g
-		s%@MODULE_DIR@%$MODULE_DIR%g
-		s%@BINARY_DIR@%$BINARY_DIR%g
-		s%@MODULES@%$MODULES%g
-	" .${file}.inc >> $file
-done
-`chmod 700 inspircd`
-
-echo -e "\033[0mWriting \033[1;32msrc/modules/Makefile\033[0m"
-rm -f src/modules/Makefile
-
-# Generate the Header..
-
-echo "# (C) ChatSpike development team" >> src/modules/Makefile
-echo "# Makefile by <Craig@ChatSpike.net>" >> src/modules/Makefile
-echo "# Many Thanks to Andrew Church <achurch@achurch.org>" >> src/modules/Makefile
-echo "#    for assisting with making this work right." >> src/modules/Makefile
-echo "#" >> src/modules/Makefile
-echo "# Automatically Generated by ./configure to add a module" >> src/modules/Makefile
-echo "# please run ./configure --update" >> src/modules/Makefile
-echo "" >> src/modules/Makefile
-echo "all: \$(MODULES)" >> src/modules/Makefile
-echo "" >> src/modules/Makefile
-
-for module in src/modules/*.cpp ; do
-     flags=`grep '$CompileFlags: ' $module | sed 's/\/\* $CompileFlags://' | sed 's/\*\///'`
-     mod=`echo $module | sed 's/.cpp/.so/' | sed 's/src\/modules\///'`
-     mod2=`echo $module | sed 's/src\/modules\///'`
-     echo "$mod: $mod2 ../../include/modules.h ../../include/users.h ../../include/channels.h ../../include/servers.h ../../include/base.h" >> src/modules/Makefile
-     echo "	\$(CC) -I../../include \$(FLAGS) -shared$flags -o $mod $mod2" >> src/modules/Makefile
-     echo "	@cp $mod \$(MODPATH)/" >> src/modules/Makefile
-     echo "" >> src/modules/Makefile
-done
-
-
-echo ""
-
-echo ""
-echo "Do you want to compile the IRCd binaries?"
-echo -e $n "[\033[1;32my\033[0m] $c"
-read YN
-if [ "$YN" != "n" ] ; then
-	echo ""
-	echo -e "\033[1;32mCompiling...\033[0m"
-	echo ""
-	cd $ME
-	$MAKEPROG
-	echo ""
-        echo "Done!"
-else
-	echo ""
-	echo -e "To build your server with these settings, please type '\033[1;32m$MAKEPROG\033[0m' now."
-fi
-
-
-echo ""
-echo -e "*** \033[1;32mRemember to edit your configuration files!!!\033[0m ***"
-echo ""