Remove the preconfigured Charybdis and UnrealIRCd module files.

These are extremely outdated. If we want to ship these then they
should be redone from scratch.

1 files changed, 0 insertions, 302 deletions

diff --git a/docs/conf/modules/charybdis.conf.example b/docs/conf/modules/charybdis.conf.example
deleted file mode 100644
index 97436c548..000000000
--- a/docs/conf/modules/charybdis.conf.example
+++ /dev/null
@@ -1,302 +0,0 @@
-<module name="md5">
-<module name="sha256">
-<module name="alias">
-<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
-<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
-<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
-<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
-<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
-<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
-<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
-<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2" requires="NickServ" uline="yes">
-
-<module name="banexception">
-<module name="banredirect">
-<module name="blockcolor">
-<module name="callerid">
-<callerid maxaccepts="16"
-          operoverride="no"
-          tracknick="no"
-          cooldown="60">
-
-<module name="cap">
-<module name="cban">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
-# (http://cgiirc.sourceforge.net).
-#<module name="cgiirc">
-#
-#-#-#-#-#-#-#-#-#-#-#-# CGIIRC  CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# Optional - If you specify to use cgiirc, then you must specify one
-# or more cgihost tags which indicate authorised CGI:IRC servers which
-# will be connecting to your network, and an optional cgiirc tag.
-# For more information see: https://wiki.inspircd.org/Modules/3.0/cgiirc
-#
-# Set to yes if you want to notice opers when CGI clients connect
-# <cgiirc opernotice="no">
-#
-# The type field indicates where the module should get the real
-# client's IP address from, for further information, please see the
-# CGI:IRC documentation.
-#
-# Old style:
-# <cgihost type="pass" mask="www.mysite.com">       # Get IP from PASS
-# <cgihost type="ident" mask="otherbox.mysite.com"> # Get IP from ident
-# <cgihost type="passfirst" mask="www.mysite.com">  # See the docs
-# New style:
-# <cgihost type="webirc" password="foobar"
-#   mask="somebox.mysite.com">                      # Get IP from WEBIRC
-#
-# IMPORTANT NOTE:
-# ---------------
-#
-# When you connect CGI:IRC clients, there are two connect classes which
-# apply to these clients. When the client initially connects, the connect
-# class which matches the cgi:irc site's host is checked. Therefore you
-# must raise the maximum local/global clients for this ip as high as you
-# want to allow cgi clients. After the client has connected and is
-# determined to be a cgi:irc client, the class which matches the client's
-# real IP is then checked. You may set this class to a lower value, so that
-# the real IP of the client can still be restricted to, for example, 3
-# sessions maximum.
-#
-
-<module name="chancreate">
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel names module: Allows disabling channels which have certain
-# characters in the channel name such as bold, colorcodes, etc. which
-# can be quite annoying and allow users to on occasion have a channel
-# that looks like the name of another channel on the network.
-<module name="channames">
-
-<channames
-	# denyrange: characters or range of characters to deny in channel
-	# names.
-	denyrange="2"
-
-	# allowrange: characters or range of characters to specifically allow
-	# in channel names.
-	allowrange="">
-
-<module name="channelban">
-<module name="chghost">
-<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
-<module name="chgident">
-<module name="chgname">
-<module name="cloaking">
-#
-#-#-#-#-#-#-#-#-#-#-#- CLOAKING  CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# If you specify the cloaking module as above, you must define        #
-# cloak keys, and optionally a cloak prefix as shown below. The cloak #
-# keys must be shared across the network for correct cloaking.        #
-#                                                                     #
-# There are four methods of cloaking:                                 #
-#                                                                     #
-#   half           Cloak only the "unique" portion of a host; show    #
-#                  the last 2 parts of the domain, /16 subnet of IPv4 #
-#                  or /48 subnet of the IPv6 address.                 #
-#                                                                     #
-#   full           Cloak the users completely, using three slices for #
-#                  common CIDR bans (IPv4: /16, /24; IPv6: /48, /64)  #
-#                                                                     #
-# These methods use a single key that can be any length of text.      #
-# An optional prefix may be specified to mark cloaked hosts.          #
-#                                                                     #
-# The following methods are maintained for backwards compatibility;   #
-# they are slightly less secure, and always hide unresolved IPs       #
-#                                                                     #
-#   compat-host    InspIRCd 1.2-compatible host-based cloaking        #
-#   compat-ip      InspIRCd 1.2-compatible ip-always cloaking         #
-#                                                                     #
-# You must specify key1, key2, key3, key4 for the compat cloaking     #
-# modes; the values must be less than 0x80000000 and should be picked #
-# at random. Prefix is mandatory, will default to network name if not #
-# specified, and will always have a "-" appended.                     #
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-<cloak mode="half"
-       key="secret"
-       prefix="net-">
-
-<module name="close">
-<module name="conn_umodes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connectban: Provides IP connection throttling. Any IP range that connects
-# too many times (configurable) in an hour is zlined for a (configurable)
-# duration, and their count resets to 0.
-#
-# ipv4cidr and ipv6cidr allow you to turn the comparison from individual
-# IP addresses (32 and 128 bits) into CIDR masks, to allow for throttling
-# over whole ISPs/blocks of IPs, which may be needed to prevent attacks.
-#
-#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
-# This allows for 10 connections in an hour with a 10 minute ban if that is exceeded.
-#
-#<module name="connectban">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Connection throttle module.
-#<module name="connflood">
-#
-#-#-#-#-#-#-#-#-#-#-#- CONTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
-#  seconds, maxconns -  Amount of connections per <seconds>.
-#
-#  timeout           -  Time to wait after the throttle was activated
-#                       before deactivating it. Be aware that the time
-#                       is seconds + timeout.
-#
-#  quitmsg           -  The message that users get if they attempt to
-#                       connect while the throttle is active.
-#
-#  bootwait          -  Amount of time to wait before enforcing the
-#                       throttling when the server just booted.
-#
-#<connflood seconds="30" maxconns="3" timeout="30"
-#   quitmsg="Throttled" bootwait="10">
-
-<module name="deaf">
-<module name="dnsbl">
-<module name="gecosban">
-<module name="globalload">
-<module name="ident">
-<ident timeout="1">
-<module name="inviteexception">
-<module name="joinflood">
-<module name="knock">
-<module name="namesx">
-<module name="operchans">
-<module name="operlog">
-<module name="opermodes">
-<module name="password_hash">
-<module name="permchannels">
-<module name="muteban">
-<module name="redirect">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular expression provider for glob or wildcard (?/*) matching.
-# You must have at least 1 provider loaded to use the filter or the
-# rline modules. This module has no additional requirements, as it uses
-# the matching already present in InspIRCd core.
-#<module name="regex_glob">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular expression provider for PCRE (Perl-Compatible Regular
-# Expressions). You need libpcre installed to compile and load this
-# module. You must have at least 1 provider loaded to use the filter or
-# the rline module.
-#<module name="regex_pcre">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Regular expression provider for POSIX regular expressions.
-# You shouldn't need any additional libraries on a POSIX-compatible
-# system (ie: any Linux, BSD, but not Windows). You must have at least
-# 1 provider loaded to use the filter or the rline module.
-# On POSIX-compliant systems, regex syntax can be found by using the
-# command: 'man 7 regex'.
-#<module name="regex_posix">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Registered users only channel creation
-# Allows only registered users and opers to create new channels.
-#
-# You probably *DO NOT* want to load this module on a public network.
-#
-#<module name="regonlycreate">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Ban users through regular expression patterns
-#<module name="rline">
-#
-#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
-#
-# If you wish to re-check a user when they change nickname (can be
-# useful under some situations, but *can* also use CPU with more users
-# on a server) then set the following configuration value:
-# Also, this is where you set what Regular Expression engine is to be
-# used. If you ever change it while running, all of your R-Lines will be
-# wiped. This is the regex engine used by all R-Lines set, and
-# regex_<engine> must be loaded, or rline will be nonfunctional
-# until you load it or change the engine to one that is loaded.
-#
-#<rline matchonnickchange="yes" engine="pcre">
-#
-# Generally, you will NOT want to use 'glob' here, as this turns
-# rline into just another gline. The exceptions are that rline will
-# always use the full nick!user@host realname string, rather than only
-# user@host, but beware that only the ? and * wildcards are available,
-# and are the only way to specify where the space can occur if you do
-# use glob. For this reason, is recommended to use a real regex engine
-# so that at least \s or [[:space:]] is available.
-
-<module name="sasl">
-<module name="servprotect">
-<module name="services_account">
-<module name="sethost">
-<module name="serverban">
-<module name="showwhois">
-<showwhois opersonly="yes" showfromopers="yes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL channel mode module: Adds support for SSL-only channels via
-# channel mode +z and the 'z' extban which matches SSL client
-# certificate fingerprints.
-# Does not do anything useful without a working SSL module (see below).
-#<module name="sslmodes">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
-# if enabled. You must answer 'yes' in ./configure when asked or
-# manually symlink the source for this module from the directory
-# src/modules/extra, if you want to enable this, or it will not load.
-#<module name="ssl_gnutls">
-#
-#-#-#-#-#-#-#-#-#-#-#-  GNUTLS CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# ssl_gnutls is too complex to describe here, see the wiki:           #
-# https://wiki.inspircd.org/Modules/3.0/ssl_gnutls                    #
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# SSL Info module: Allows users to retrieve information about other
-# user's peer SSL certificates and keys. This can be used by client
-# scripts to validate users. For this to work, one of ssl_gnutls
-# or ssl_openssl must be loaded. This module also adds the
-# "* <user> is using a secure connection" whois line, the ability for
-# opers to use SSL cert fingerprints to verify their identity and the
-# ability to force opers to use SSL connections in order to oper up.
-# It is highly recommended to load this module especially if
-# you use SSL on your network.
-# For how to use the oper features, please see the first example <oper> tag
-# in opers.conf.example.
-#
-#<module name="sslinfo">
-
-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
-# if enabled. You must answer 'yes' in ./configure when asked or symlink
-# the source for this module from the directory src/modules/extra, if
-# you want to enable this, or it will not load.
-#<module name="ssl_openssl">
-#
-#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
-#                                                                     #
-# ssl_openssl is too complex to describe here, see the wiki:          #
-# https://wiki.inspircd.org/Modules/3.0/ssl_openssl                   #
-
-<module name="stripcolor">
-<module name="svshold">
-<module name="tline">
-<module name="uhnames">
-<module name="watch">
-<watch maxentries="32">
-<module name="xline_db">
-
-<module name="spanningtree">