Merge insp20

13 files changed, 112 insertions, 140 deletions

diff --git a/docs/COPYING b/docs/COPYING
index 1c8a914d4..6e2ceda85 100644
--- a/docs/COPYING
+++ b/docs/COPYING
@@ -7,14 +7,14 @@
 ----------------------------------------------------------------------
 
                     GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
+                       Version 2, June 1991
 
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          675 Mass Ave, Cambridge, MA 02139, USA
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
-			    Preamble
+                            Preamble
 
   The licenses for most software are designed to take away your
 freedom to share and change it.  By contrast, the GNU General Public
@@ -23,7 +23,7 @@ software--to make sure the software is free for all its users.  This
 General Public License applies to most of the Free Software
 Foundation's software and to any other program whose authors commit to
 using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
+the GNU Lesser General Public License instead.)  You can apply it to
 your programs, too.
 
   When we speak of free software, we are referring to freedom, not
@@ -63,8 +63,8 @@ patent must be licensed for everyone's free use or not licensed at all.
 
   The precise terms and conditions for copying, distribution and
 modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
+
+                    GNU GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
   0. This License applies to any program or other work which contains
@@ -118,7 +118,7 @@ above, provided that you also meet all of these conditions:
     License.  (Exception: if the Program itself is interactive but
     does not normally print such an announcement, your work based on
     the Program is not required to print an announcement.)
-
+
 These requirements apply to the modified work as a whole.  If
 identifiable sections of that work are not derived from the Program,
 and can be reasonably considered independent and separate works in
@@ -176,7 +176,7 @@ access to copy from a designated place, then offering equivalent
 access to copy the source code from the same place counts as
 distribution of the source code, even though third parties are not
 compelled to copy the source along with the object code.
-
+
   4. You may not copy, modify, sublicense, or distribute the Program
 except as expressly provided under this License.  Any attempt
 otherwise to copy, modify, sublicense or distribute the Program is
@@ -233,7 +233,7 @@ impose that choice.
 
 This section is intended to make thoroughly clear what is believed to
 be a consequence of the rest of this License.
-
+
   8. If the distribution and/or use of the Program is restricted in
 certain countries either by patents or by copyrighted interfaces, the
 original copyright holder who places the Program under this License
@@ -263,7 +263,7 @@ make exceptions for this.  Our decision will be guided by the two goals
 of preserving the free status of all derivatives of our free software and
 of promoting the sharing and reuse of software generally.
 
-			    NO WARRANTY
+                            NO WARRANTY
 
   11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
 FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
@@ -285,9 +285,9 @@ YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
 PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGES.
 
-		     END OF TERMS AND CONDITIONS
-
-	Appendix: How to Apply These Terms to Your New Programs
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
 possible use to the public, the best way to achieve this is to make it
@@ -299,7 +299,7 @@ convey the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
+    Copyright (C) <year>  <name of author>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -311,16 +311,16 @@ the "copyright" line and a pointer to where the full notice is found.
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
 
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 
 Also add information on how to contact you by electronic and paper mail.
 
 If the program is interactive, make it output a short notice like this
 when it starts in an interactive mode:
 
-    Gnomovision version 69, Copyright (C) 19yy name of author
+    Gnomovision version 69, Copyright (C) year name of author
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.
@@ -343,5 +343,5 @@ necessary.  Here is a sample; alter the names:
 This General Public License does not permit incorporating your program into
 proprietary programs.  If your program is a subroutine library, you may
 consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
+library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.
diff --git a/docs/conf/censor.conf.example b/docs/conf/censor.conf.example
index 342ccd875..ea9e08147 100644
--- a/docs/conf/censor.conf.example
+++ b/docs/conf/censor.conf.example
@@ -1,11 +1,9 @@
-# Configuration file for m_censor.so (1.0.0.0)
-# C.J.Edwards May 2004.
-#
+# Configuration file for m_censor.so
 
 # The tags for this module are formatted as follows:
 #
-# <badword	text="simple word"
-#		replace="text to replace with">
+# <badword text="simple word"
+#          replace="text to replace with">
 #
 # You can specify <badword text="simple word" replace="">
 # to block lines containing the word
diff --git a/docs/conf/filter.conf.example b/docs/conf/filter.conf.example
index 922f55fb6..8f5d20c24 100644
--- a/docs/conf/filter.conf.example
+++ b/docs/conf/filter.conf.example
@@ -1,4 +1,4 @@
-# Configuration file for m_filter.so and m_filter_pcre.so
+# Configuration file for m_filter.so
 
 # The tags for this module are formatted as follows:
 #
diff --git a/docs/conf/helpop-full.conf.example b/docs/conf/helpop-full.conf.example
index 0cabfccd0..bddb5846a 100644
--- a/docs/conf/helpop-full.conf.example
+++ b/docs/conf/helpop-full.conf.example
@@ -769,7 +769,7 @@ Closes all unregistered connections to the local server.">
  c            Blocks private messages and notices from users who do
               not share a common channel with you (requires
               commonchans module).
- d            Deaf mode. User will not recieve any messages or notices
+ d            Deaf mode. User will not receive any messages or notices
               from channels they are in (requires deaf module).
  g            In combination with /allow, provides for server side
               ignore (requires callerid module).
diff --git a/docs/conf/helpop.conf.example b/docs/conf/helpop.conf.example
index b4c1e7d67..2c5102fcc 100644
--- a/docs/conf/helpop.conf.example
+++ b/docs/conf/helpop.conf.example
@@ -77,7 +77,7 @@ LOCKSERV       UNLOCKSERV   JUMPSERVER">
  c            Blocks private messages and notices from users who do
               not share a common channel with you (requires
               commonchans module).
- d            Deaf mode. User will not recieve any messages or notices
+ d            Deaf mode. User will not receive any messages or notices
               from channels they are in (requires deaf module).
  g            In combination with /allow, provides for server side
               ignore (requires callerid module).
diff --git a/docs/conf/inspircd.conf.example b/docs/conf/inspircd.conf.example
index 036a3ebfc..8a498577a 100644
--- a/docs/conf/inspircd.conf.example
+++ b/docs/conf/inspircd.conf.example
@@ -136,12 +136,9 @@
 #   |_| \_\___|\__,_|\__,_|   |_| |_| |_|_|___/ |____/|_|\__(_)       #
 #                                                                     #
 #  If you want to link servers to InspIRCd you must load the          #
-#  m_spanningtree.so module! Please see the modules list below for    #
+#  m_spanningtree.so module! Please see the modules list for          #
 #  information on how to load this module! If you do not load this    #
-#  module, server ports will NOT be bound!                            #
-#                                                                     #
-# PLEASE NOTE: If you have build InspIRCd with IPv6 support, you MUST #
-# specify a bind address if you want the IRCd to bind to a IPv4 IP.   #
+#  module, server ports will NOT work!                                #
 
 <bind
       # address: IP address to bind to if the box that you are hosting
@@ -198,10 +195,12 @@
 #                                                                     #
 
 <power
-       # hash: what hash these passwords are hashed with. requires the module
-       # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
-       # loaded and the password hashing module (m_password_hash.so)
-       # loaded. Options here are: "md5", "sha256" and "ripemd160".
+       # hash: what hash these passwords are hashed with.
+       # Requires the module for selected hash (m_md5.so, m_sha256.so
+       # or m_ripemd160.so) be loaded and the password hashing module
+       # (m_password_hash.so) loaded.
+       # Options here are: "md5", "sha256" and "ripemd160", or one of
+       # these prefixed with "hmac-", e.g.: "hmac-sha256".
        # Optional, but recommended. Create hashed password with:
        # /mkpasswd <hash> <password>
        #hash="sha256"
@@ -639,13 +638,10 @@
 #                                                                     #
 
 <performance
-             # netbuffersize: Size of the buffer used to recieve data from clients.
+             # netbuffersize: Size of the buffer used to receive data from clients.
              # The ircd may only read this amount of text in 1 go at any time.
              netbuffersize="10240"
 
-             # maxwho: Maximum number of results to show in a /who query.
-             maxwho="4096"
-
              # somaxconn: The maximum number of connections that may be waiting
              # in the accept queue. This is *NOT* the total maximum number of
              # connections per server. Some systems may only allow this to be up
diff --git a/docs/conf/links.conf.example b/docs/conf/links.conf.example
index 76e9c09cb..382455bcd 100644
--- a/docs/conf/links.conf.example
+++ b/docs/conf/links.conf.example
@@ -36,10 +36,9 @@
       # failover (see above).
       timeout="300"
 
-      # ssl: If defined, this states extra modules that will be used when
+      # ssl: If defined, this states the SSL module that will be used when
       # making an outbound connection to the server. Options are: "openssl"
-      # and "gnutls" for encryption (they are compatible with each other).
-      # You must use the same (or a compatible) transport on both sides of the link.
+      # and "gnutls" (they are compatible with each other).
       #
       # You will need to load the m_ssl_openssl.so module for openssl,
       # m_ssl_gnutls.so for gnutls. The server port that you connect to
@@ -100,7 +99,7 @@
 
 # Failover autoconnect block. If you have multiple hubs, or want your network
 # to automatically link even if the hub is down, you can specify multiple
-# space seperated servers to autoconnect; they will be tried in a round
+# space separated servers to autoconnect; they will be tried in a round
 # robin fashion until one succeeds. Period defines the time for restarting
 # a single loop.
 <autoconnect period="120"
diff --git a/docs/conf/modules.conf.example b/docs/conf/modules.conf.example
index ca1340f04..d329ab522 100644
--- a/docs/conf/modules.conf.example
+++ b/docs/conf/modules.conf.example
@@ -210,7 +210,7 @@
 #   Allow opers (channels/auspex) to see see all joins/parts/kicks in the channel
 #
 # Exemptchanops can be used to adjust the level at which users become visible or
-# the level at which they can see the full membe list of the channel.
+# the level at which they can see the full member list of the channel.
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Autoop module: Adds basic channel access controls via the +w listmode.
@@ -265,7 +265,7 @@
 #           capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Block color module: Blocking color-coded messages with cmode +c
+# Block color module: Blocking color-coded messages with chan mode +c
 #<module name="m_blockcolor.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -274,7 +274,7 @@
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # CallerID module: Adds usermode +g which activates hybrid-style 
-# callerid (== block all private messages unless you /accept first)
+# callerid: block all private messages unless you /accept first
 #<module name="m_callerid.so">
 # 
 #-#-#-#-#-#-#-#-#-#-#- CALLERID  CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
@@ -399,7 +399,7 @@
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Channel Names module: Allows disabling channels which have certain
-# characters in the channel name such as bold, colorcodes, etc which
+# characters in the channel name such as bold, colorcodes, etc. which
 # can be quite annoying and allow users to on occasion have a channel
 # that looks like the name of another channel on the network.
 #<module name="m_channames.so">
@@ -494,8 +494,8 @@
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Clones module: Adds an oper command /CLONES for detecting cloned
-# users. Warning: This module may be resource intensive when its
-# command is issued, use with care.
+# users. Warning: This command may be resource intensive when it is
+# issued, use with care.
 # This module is oper-only.
 # To use, CLONES must be in one of your oper class blocks.
 #<module name="m_clones.so">
@@ -544,7 +544,7 @@
 
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Channel cycle module. Server side /hop, with +ilk etc bypass.
+# Channel cycle module. Server side /hop, with +ilk etc. bypass.
 #<module name="m_cycle.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -582,7 +582,7 @@
 #   quitmsg="Throttled" bootwait="10">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Custom prefixes: allows for channel prefixes to be added.
+# Custom prefixes: allows for channel prefixes to be added. 
 #<module name="m_customprefix.so">
 #
 # name       The name of the mode, must be unique from other modes
@@ -596,6 +596,8 @@
 #<customprefix name="admin" letter="a" prefix="&amp;" rank="40000" ranktoset="50000">
 #<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
 #<customprefix name="halfvoice" letter="V" prefix="-" rank="1" ranktoset="20000">
+#
+# Do /reloadmodule m_customprefix.so after changing the settings of this module.
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Custom title module: Adds the /TITLE command which allows for trusted
@@ -684,7 +686,7 @@
 # Glob masks are accepted here also.
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Devoice Module: Let users devoice themselves.
+# Devoice Module: Let users devoice themselves using /devoice #chan.
 #<module name="m_devoice.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -787,7 +789,7 @@
 #<include file="examples/inspircd.helpop-full.example">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# HIDECHANS module: Allows opers to hide their channels list from non-
+# HIDECHANS module: Allows users to hide their channels list from non-
 # opers by setting user mode +I on themselves.
 #<module name="m_hidechans.so">
 #
@@ -900,7 +902,7 @@
 #<module name="m_ircv3.so">
 # The following block can be used to control which extensions are
 # enabled.
-#<ircv3 accoutnotify="on" awaynotify="on" extendedjoin="on">
+#<ircv3 accountnotify="on" awaynotify="on" extendedjoin="on">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Join flood module: Adds support for join flood protection (+j)
@@ -1034,7 +1036,7 @@
 # are specified in a <class> tag that the oper is part of. This is so #
 # you can control who has access to this possible dangerous command.  #
 # If your server is locked and you get disconnected, do a REHASH from #
-# shell to open up again.
+# shell to open up again.                                             #
 #
 # This module is oper-only.
 #
@@ -1043,7 +1045,7 @@
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Map hiding module: replaces /MAP and /LINKS output to users with a  #
 # message to see a website, set by maphide="http://link.to/site" in   #
-# the security tag, instead.                                          #
+# the <security> tag, instead.                                        #
 #<module name="m_maphide.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1136,10 +1138,10 @@
 #<module name="m_nokicks.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# No nicks module: Adds the +N channel mode, as well as the +b N:
-# extended bantype. +N stops all users from changing their nick,
-# the +b N: extban stops anyone from matching a +b N:nick!user@host
-# mask from changing their nick.
+# No nicks module: Adds the +N channel mode, as well as the N extban.
+# +N stops all users from changing their nick, the N extban stops
+# anyone from matching a +b N:nick!user@host mask from changing their
+# nick.
 #<module name="m_nonicks.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1153,7 +1155,7 @@
 #<module name="m_nonotice.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Network buisness join module
+# Network business join module
 # Allows an oper to join a channel using /OJOIN, giving them +Y on the
 # channel which makes them immune to kick/deop/etc.
 #<module name="m_ojoin.so">
@@ -1185,7 +1187,7 @@
 # If you are using the m_operjoin.so module, specify options here:    #
 #                                                                     #
 # channel     -      The channel name to join, can also be a comma    #
-#                    seperated list eg. "#channel1,#channel2".        #
+#                    separated list eg. "#channel1,#channel2".        #
 #                                                                     #
 # override    -      Lets the oper join walking thru any modes that   #
 #                    might be set, even bans. Use "yes" or "no".      #
@@ -1217,7 +1219,7 @@
 #<operprefix prefix="!">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MOTD module: Provides support for seperate message of the day
+# Oper MOTD module: Provides support for separate message of the day
 # on oper-up
 # This module is oper-only.
 #<module name="m_opermotd.so">
@@ -1249,7 +1251,7 @@
 # Oper levels module: Gives each oper a level and prevents
 # actions being taken against higher level opers
 # Specify the level as the 'level' parameter of the <type> tag
-# # This module is oper-only.
+# This module is oper-only.
 #<module name="m_operlevels.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1276,7 +1278,7 @@
 		# You can also use $user for the user ident string.
 		forwardmsg="NOTICE $nick :*** Forwarding PASS to $nickrequired"
 
-		# cmd: Command for the nick to run when it recieves a connect
+		# cmd: Command for the nick to run when it receives a connect
 		# password. 
 		cmd="PRIVMSG $nickrequired :IDENTIFY $pass">
 
@@ -1317,7 +1319,9 @@
 # whenever +P is set, unset, or the topic/modes on a +P channel is changed.
 # If you want to do this, set the filename below, and uncomment the include.
 #
-#<permchanneldb filename="data/permchannels.conf">
+# If 'listmodes' is true then all list modes (+b, +I, +e, +g...) will be
+# saved. Defaults to false.
+#<permchanneldb filename="data/permchannels.conf" listmodes="true">
 #<include file="data/permchannels.conf">
 #
 # You may also create channels on startup by using the <permchannels> block.
@@ -1356,7 +1360,7 @@
 # Optional - If you specify to use the m_randquote.so module, then    #
 # specify below the path to the randquotes.conf file.                 #
 #                                                                     #
-#<randquote file="randquotes.conf">
+#<randquote file="quotes.txt">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Redirect module: Adds channel redirection (mode +L)                 #
@@ -1394,8 +1398,8 @@
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Regular Expression Provider for POSIX Regular Expressions.
 # You shouldn't need any additional libraries on a POSIX-compatible
-# system (ie: any Linux, BSD, but not Windows). You must have at least
-# 1 provider loaded to use m_filter or m_rline.
+# system (i.e.: any Linux, BSD, but not Windows). You must have at
+# least 1 provider loaded to use m_filter or m_rline.
 # On POSIX-compliant systems, regex syntax can be found by using the
 # command: 'man 7 regex'.
 #<module name="m_regex_posix.so">
@@ -1591,7 +1595,7 @@
 # and is similar in operation to the way asuka and ircu handle services.
 #
 # At the same time, this offers +r for users and channels to mark them
-# as identified seperately from the idea of a master account, which
+# as identified separately from the idea of a master account, which
 # can be useful for services which are heavily nick-as-account centric.
 #
 # This replaces m_services from 1.1 and earlier.
@@ -1618,8 +1622,6 @@
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # SETNAME module: Adds the /SETNAME command
-# This module is oper-only.
-# To use, SETNAME must be in one of your oper class blocks.
 #<module name="m_setname.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1639,7 +1641,7 @@
 # it directly affects the mode object itself.
 #<showwhois opersonly="yes"
 #
-# You may also set whether or not users should recieve whois notices, should
+# You may also set whether or not users should receive whois notices, should
 # they be /whois'd by an oper.
 # showfromopers="yes">
 
@@ -1665,20 +1667,16 @@
 #<module name="m_sslmodes.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
+# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
+# if enabled. You must answer 'yes' in ./configure when asked or
+# manually symlink the source for this module from the directory
+# src/modules/extra, if you want to enable this, or it will not load.
 #<module name="m_ssl_gnutls.so">
 #
 #-#-#-#-#-#-#-#-#-#-#-  GNUTLS CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
 #                                                                     #
 # m_ssl_gnutls.so is too complex it describe here, see the wiki:      #
 # http://wiki.inspircd.org/Modules/ssl_gnutls                         #
-#                                                                     #
-# NOTE: If you want to use this module to encrypt and sign your       #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file!                                            #
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # SSL Info module: Allows users to retrieve information about other
@@ -1696,20 +1694,16 @@
 #<module name="m_sslinfo.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
+# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
+# if enabled. You must answer 'yes' in ./configure when asked or symlink
+# the source for this module from the directory src/modules/extra, if
+# you want to enable this, or it will not load.
 #<module name="m_ssl_openssl.so">
 #
 #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
 #                                                                     #
 # m_ssl_openssl.so is too complex it describe here, see the wiki:     #
 # http://wiki.inspircd.org/Modules/ssl_openssl                        #
-#                                                                     #
-# NOTE: If you want to use this module to encrypt and sign your       #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file!                                            #
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Strip color module: Adds the channel mode +S
@@ -1792,7 +1786,7 @@
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Test line module: Adds the /TLINE command, used to test how many
-# users a /GLINE or /ZLINE etc would match.
+# users a /GLINE or /ZLINE etc. would match.
 # This module is oper-only.
 # To use, TLINE must be in one of your oper class blocks.
 #<module name="m_tline.so">
@@ -1805,10 +1799,9 @@
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # UHNAMES support module: Adds support for the IRCX style UHNAMES
 # extension, which displays ident and hostname in the names list for
-# each user, saving clients from doing a WHO on the channel. Note that
-# this module is not widely supported yet. If a client does not support
-# UHNAMES it will not enable it, this will not break incompatible
-# clients.
+# each user, saving clients from doing a WHO on the channel.
+# If a client does not support UHNAMES it will not enable it, this will
+# not break incompatible clients.
 #<module name="m_uhnames.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
@@ -1818,8 +1811,8 @@
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # Userip module: Adds the /USERIP command
-# This module is oper-only.
-# To use, USERIP must be in one of your oper class blocks.
+# Allows users to query their own IP, also allows opers to query the IP
+# of anyone else.
 #<module name="m_userip.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
diff --git a/docs/conf/modules/charybdis.conf.example b/docs/conf/modules/charybdis.conf.example
index 4490d5482..b456278bb 100644
--- a/docs/conf/modules/charybdis.conf.example
+++ b/docs/conf/modules/charybdis.conf.example
@@ -257,20 +257,16 @@
 #<module name="m_sslmodes.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
+# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
+# if enabled. You must answer 'yes' in ./configure when asked or
+# manually symlink the source for this module from the directory
+# src/modules/extra, if you want to enable this, or it will not load.
 #<module name="m_ssl_gnutls.so">
 #
 #-#-#-#-#-#-#-#-#-#-#-  GNUTLS CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
 #                                                                     #
 # m_ssl_gnutls.so is too complex it describe here, see the wiki:      #
 # http://wiki.inspircd.org/Modules/ssl_gnutls                         #
-#                                                                     #
-# NOTE: If you want to use this module to encrypt and sign your       #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file!                                            #
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
 # SSL Info module: Allows users to retrieve information about other
@@ -288,20 +284,16 @@
 #<module name="m_sslinfo.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
+# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
+# if enabled. You must answer 'yes' in ./configure when asked or symlink
+# the source for this module from the directory src/modules/extra, if
+# you want to enable this, or it will not load.
 #<module name="m_ssl_openssl.so">
 #
 #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
 #                                                                     #
 # m_ssl_openssl.so is too complex it describe here, see the wiki:     #
 # http://wiki.inspircd.org/Modules/ssl_openssl                        #
-#                                                                     #
-# NOTE: If you want to use this module to encrypt and sign your       #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file!                                            #
 
 <module name="m_stripcolor.so">
 <module name="m_svshold.so">
diff --git a/docs/conf/modules/unrealircd.conf.example b/docs/conf/modules/unrealircd.conf.example
index 2d27b43a0..afd54359c 100644
--- a/docs/conf/modules/unrealircd.conf.example
+++ b/docs/conf/modules/unrealircd.conf.example
@@ -239,7 +239,7 @@
 # If you are using the m_operjoin.so module, specify options here:    #
 #                                                                     #
 # channel     -      The channel name to join, can also be a comma    #
-#                    seperated list eg. "#channel1,#channel2".        #
+#                    separated list eg. "#channel1,#channel2".        #
 #                                                                     #
 # override    -      Lets the oper join walking thru any modes that   #
 #                    might be set, even bans. Use "yes" or "no".      #
@@ -254,7 +254,7 @@
 <module name="m_operlog.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# Oper MOTD module: Provides support for seperate message of the day
+# Oper MOTD module: Provides support for separate message of the day
 # on oper-up
 # This module is oper-only.
 #<module name="m_opermotd.so">
@@ -365,38 +365,30 @@
 <module name="m_sslmodes.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# GnuTLS ssl module: Adds support for client-server SSL using GnuTLS,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
+# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
+# if enabled. You must answer 'yes' in ./configure when asked or symlink
+# the source for this module from the directory src/modules/extra, if
+# you want to enable this, or it will not load. 
 #<module name="m_ssl_gnutls.so">
 #
 #-#-#-#-#-#-#-#-#-#-#-  GNUTLS CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
 #                                                                     #
 # m_ssl_gnutls.so is too complex it describe here, see the wiki:      #
 # http://wiki.inspircd.org/Modules/ssl_gnutls                         #
-#                                                                     #
-# NOTE: If you want to use this module to encrypt and sign your       #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file!                                            #
 
 <module name="m_sslinfo.so">
 
 #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
-# OpenSSL ssl module: Adds support for client-server SSL using OpenSSL,
-# if enabled. You must copy the source for this module from the directory
-# src/modules/extra, or answer 'yes' in ./configure when asked if you
-# want to enable this, or it will not load.
+# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
+# if enabled. You must answer 'yes' in ./configure when asked or symlink
+# the source for this module from the directory src/modules/extra, if
+# you want to enable this, or it will not load.
 #<module name="m_ssl_openssl.so">
 #
 #-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-#
 #                                                                     #
 # m_ssl_openssl.so is too complex it describe here, see the wiki:     #
 # http://wiki.inspircd.org/Modules/ssl_openssl                        #
-#                                                                     #
-# NOTE: If you want to use this module to encrypt and sign your       #
-# server to server traffic, you MUST load it before m_spanningtree in #
-# your configuration file!                                            #
 
 <module name="m_stripcolor.so">
 <module name="m_svshold.so">
diff --git a/docs/conf/motd.txt.example b/docs/conf/motd.txt.example
index 70830b8da..66fddd344 100644
--- a/docs/conf/motd.txt.example
+++ b/docs/conf/motd.txt.example
@@ -29,7 +29,7 @@
       /   * Web: http://www.inspircd.org           \
       |   * IRC: irc.inspircd.org #inspircd        |
       |   * Docs: http://wiki.inspircd.org         |
-      |   * Bugs: http://inspircd.github.com/bugs  |
+      |   * Bugs: http://inspircd.org/bugs         |
       |                                            |
       | We hope you like this software. Please do  |
       | make  sure  you  put  some  effort  into   |
diff --git a/docs/conf/opermotd.txt.example b/docs/conf/opermotd.txt.example
index c91b36a2b..110cba8e4 100644
--- a/docs/conf/opermotd.txt.example
+++ b/docs/conf/opermotd.txt.example
@@ -29,7 +29,7 @@
       /   * Web: http://www.inspircd.org           \
       |   * IRC: irc.inspircd.org #inspircd        |
       |   * Docs: http://wiki.inspircd.org         |
-      |   * Bugs: http://inspircd.github.com/bugs  |
+      |   * Bugs: http://inspircd.org/bugs         |
       |                                            |
       | We hope you like this software. Please do  |
       | make  sure  you  put  some  effort  into   |
diff --git a/docs/conf/opers.conf.example b/docs/conf/opers.conf.example
index c62de0e55..e7b65b675 100644
--- a/docs/conf/opers.conf.example
+++ b/docs/conf/opers.conf.example
@@ -28,9 +28,9 @@
      #   - channels/high-join-limit: allows opers with this priv to join <channels:opers> total channels instead of <channels:users> total channels.
      # PERMISSIONS:
      #   - users/flood/no-throttle: allows opers with this priv to send commands without being throttled (*NOTE)
-     #   - users/flood/increased-buffers: allows opers with this priv to send and recieve data without worrying about being disconnected for exceeding limits (*NOTE)
+     #   - users/flood/increased-buffers: allows opers with this priv to send and receive data without worrying about being disconnected for exceeding limits (*NOTE)
      #
-     # *NOTE: These privs are potantially dangerous, as they grant users with them the ability to hammer your server's CPU/RAM as much as they want, essentially.
+     # *NOTE: These privs are potentially dangerous, as they grant users with them the ability to hammer your server's CPU/RAM as much as they want, essentially.
      privs="users/auspex channels/auspex servers/auspex users/mass-message channels/high-join-limit users/flood/no-throttle users/flood/increased-buffers"
 
      # usermodes: Oper-only usermodes that opers with this class can use.
@@ -139,10 +139,12 @@
       # Remember: This is case sensitive
       name="Brain"
 
-      # hash: what hash this password is hashed with. requires the module
-      # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
-      # loaded and the password hashing module (m_password_hash.so)
-      # loaded. Options here are: "md5", "sha256" and "ripemd160".
+      # hash: what hash this password is hashed with.
+      # Requires the module for selected hash (m_md5.so, m_sha256.so
+      # or m_ripemd160.so) be loaded and the password hashing module
+      # (m_password_hash.so) loaded.
+      # Options here are: "md5", "sha256" and "ripemd160", or one of
+      # these prefixed with "hmac-", e.g.: "hmac-sha256".
       # Create hashed password with: /mkpasswd <hash> <password>
       hash="sha256"