diff options
| -rw-r--r-- | docs/Doxyfile | 143 |
1 files changed, 110 insertions, 33 deletions
diff --git a/docs/Doxyfile b/docs/Doxyfile index c2abe85d8..e731ec590 100644 --- a/docs/Doxyfile +++ b/docs/Doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.3.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -52,7 +52,7 @@ PROJECT_LOGO = # If a relative path is entered, it will be relative to the location # where doxygen was started. If left blank the current directory will be used. -OUTPUT_DIRECTORY = doxygen +OUTPUT_DIRECTORY = docs/doxygen # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create # 4096 sub-directories (in 2 levels) under the output directory of each output @@ -126,7 +126,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -229,14 +231,15 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = @@ -249,6 +252,13 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = YES +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -269,10 +279,10 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES (the +# default) will make doxygen replace the get and set methods by a property in +# the documentation. This will only work if the methods are indeed getting or # setting a simple type. If this is not the case, or you want to show the # methods anyway, you should set this option to NO. @@ -362,7 +372,8 @@ EXTRACT_ALL = NO EXTRACT_PRIVATE = NO -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. EXTRACT_PACKAGE = NO @@ -533,7 +544,8 @@ GENERATE_BUGLIST = YES GENERATE_DEPRECATEDLIST= YES # The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. +# documentation sections, marked by \if section-label ... \endif +# and \cond section-label ... \endcond blocks. ENABLED_SECTIONS = @@ -578,7 +590,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -591,7 +603,8 @@ LAYOUT_FILE = # requires the bibtex tool to be installed. See also # http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style # of the bibliography can be controlled using LATEX_BIB_STYLE. To use this -# feature you need bibtex and perl available in the search path. +# feature you need bibtex and perl available in the search path. Do not use +# file names with spaces, bibtex cannot handle them. CITE_BIB_FILES = @@ -777,6 +790,13 @@ FILTER_SOURCE_FILES = NO FILTER_SOURCE_PATTERNS = +# If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page (index.html). +# This can be useful if you have a project on for instance GitHub and want reuse +# the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = README.md + #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- @@ -795,7 +815,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -898,13 +918,23 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note # that these files will be copied to the base HTML output directory. Use the @@ -989,9 +1019,9 @@ DOCSET_FEEDNAME = "Doxygen generated documentation" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher @@ -1176,6 +1206,13 @@ FORMULA_TRANSPARENT = YES USE_MATHJAX = NO +# When MathJax is enabled you can set the default output format to be used for +# thA MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and +# SVG. The default value is HTML-CSS, which is slower, but has the best +# compatibility. + +MATHJAX_FORMAT = HTML-CSS + # When MathJax is enabled you need to specify the location relative to the # HTML output directory using the MATHJAX_RELPATH option. The destination # directory should contain the MathJax.js script. For instance, if the mathjax @@ -1204,15 +1241,55 @@ MATHJAX_EXTENSIONS = SEARCHENGINE = YES # When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvantages are that it is more difficult to setup -# and does not have live searching capabilities. +# implemented using a web server instead of a web client using Javascript. +# There are two flavours of web server based search depending on the +# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for +# searching and an index file used by the script. When EXTERNAL_SEARCH is +# enabled the indexing and searching needs to be provided by external tools. +# See the manual for details. SERVER_BASED_SEARCH = NO +# When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain +# the search results. Doxygen ships with an example indexer (doxyindexer) and +# search engine (doxysearch.cgi) which are based on the open source search engine +# library Xapian. See the manual for configuration details. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will returned the search results when EXTERNAL_SEARCH is enabled. +# Doxygen ships with an example search engine (doxysearch) which is based on +# the open source search engine library Xapian. See the manual for configuration +# details. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id +# of to a relative location where the documentation can be found. +# The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ... + +EXTRA_SEARCH_MAPPINGS = + #--------------------------------------------------------------------------- # configuration options related to the LaTeX output #--------------------------------------------------------------------------- |