path: root/lib/rbot/rfc2812.rb

module Irc
  # RFC 2812   Internet Relay Chat: Client Protocol
  #
  RPL_WELCOME=001
  # "Welcome to the Internet Relay Network
  # <nick>!<user>@<host>"
  RPL_YOURHOST=002
  # "Your host is <servername>, running version <ver>"
  RPL_CREATED=003
  # "This server was created <date>"
  RPL_MYINFO=004
  # "<servername> <version> <available user modes>
  # <available channel modes>"
  #
  # - The server sends Replies 001 to 004 to a user upon
  # successful registration.
  #
  # RPL_BOUNCE=005
  # # "Try server <server name>, port <port number>"
  RPL_ISUPPORT=005
  # "005 nick PREFIX=(ov)@+ CHANTYPES=#& :are supported by this server"
  #
  # - Sent by the server to a user to suggest an alternative
  # server.  This is often used when the connection is
  # refused because the server is already full.
  #
  RPL_USERHOST=302
  # ":*1<reply> *( " " <reply> )"
  #
  # - Reply format used by USERHOST to list replies to
  # the query list.  The reply string is composed as
  # follows:
  #
  # reply = nickname [ "*" ] "=" ( "+" / "-" ) hostname
  #
  # The '*' indicates whether the client has registered
  # as an Operator.  The '-' or '+' characters represent
  # whether the client has set an AWAY message or not
  # respectively.
  #
  RPL_ISON=303
  # ":*1<nick> *( " " <nick> )"
  #
  # - Reply format used by ISON to list replies to the
  # query list.
  #
  RPL_AWAY=301
  # "<nick> :<away message>"
  RPL_UNAWAY=305
  # ":You are no longer marked as being away"
  RPL_NOWAWAY=306
  # ":You have been marked as being away"
  #
  # - These replies are used with the AWAY command (if
  # allowed).  RPL_AWAY is sent to any client sending a
  # PRIVMSG to a client which is away.  RPL_AWAY is only
  # sent by the server to which the client is connected.
  # Replies RPL_UNAWAY and RPL_NOWAWAY are sent when the
  # client removes and sets an AWAY message.
  #
  RPL_WHOISUSER=311
  # "<nick> <user> <host> * :<real name>"
  RPL_WHOISSERVER=312
  # "<nick> <server> :<server info>"
  RPL_WHOISOPERATOR=313
  # "<nick> :is an IRC operator"
  RPL_WHOISIDLE=317
  # "<nick> <integer> :seconds idle"
  RPL_ENDOFWHOIS=318
  # "<nick> :End of WHOIS list"
  RPL_WHOISCHANNELS=319
  # "<nick> :*( ( "@" / "+" ) <channel> " " )"
  #
  # - Replies 311 - 313, 317 - 319 are all replies
  # generated in response to a WHOIS message.  Given that
  # there are enough parameters present, the answering
  # server MUST either formulate a reply out of the above
  # numerics (if the query nick is found) or return an
  # error reply.  The '*' in RPL_WHOISUSER is there as
  # the literal character and not as a wild card.  For
  # each reply set, only RPL_WHOISCHANNELS may appear
  # more than once (for long lists of channel names).
  # The '@' and '+' characters next to the channel name
  # indicate whether a client is a channel operator or
  # has been granted permission to speak on a moderated
  # channel.  The RPL_ENDOFWHOIS reply is used to mark
  # the end of processing a WHOIS message.
  #
  RPL_WHOWASUSER=314
  # "<nick> <user> <host> * :<real name>"
  RPL_ENDOFWHOWAS=369
  # "<nick> :End of WHOWAS"
  #
  # - When replying to a WHOWAS message, a server MUST use
  # the replies RPL_WHOWASUSER, RPL_WHOISSERVER or
  # ERR_WASNOSUCHNICK for each nickname in the presented
  # list.  At the end of all reply batches, there MUST
  # be RPL_ENDOFWHOWAS (even if there was only one reply
  # and it was an error).
  #
  RPL_LISTSTART=321
  # Obsolete. Not used.
  #
  RPL_LIST=322
  # "<channel> <# visible> :<topic>"
  RPL_LISTEND=323
  # ":End of LIST"
  #
  # - Replies RPL_LIST, RPL_LISTEND mark the actual replies
  # with data and end of the server's response to a LIST
  # command.  If there are no channels available to return,
  # only the end reply MUST be sent.
  #
  RPL_UNIQOPIS=325
  # "<channel> <nickname>"
  #
  RPL_CHANNELMODEIS=324
  # "<channel> <mode> <mode params>"
  #
  RPL_NOTOPIC=331
  # "<channel> :No topic is set"
  RPL_TOPIC=332
  # "<channel> :<topic>"
  #
  # - When sending a TOPIC message to determine the
  # channel topic, one of two replies is sent.  If
  # the topic is set, RPL_TOPIC is sent back else
  # RPL_NOTOPIC.
  #
  RPL_TOPIC_INFO=333
  # <channel> <set by> <unixtime>
  RPL_INVITING=341
  # "<channel> <nick>"
  #
  # - Returned by the server to indicate that the
  # attempted INVITE message was successful and is
  # being passed onto the end client.
  #
  RPL_SUMMONING=342
  # "<user> :Summoning user to IRC"
  #
  # - Returned by a server answering a SUMMON message to
  # indicate that it is summoning that user.
  #
  RPL_INVITELIST=346
  # "<channel> <invitemask>"
  RPL_ENDOFINVITELIST=347
  # "<channel> :End of channel invite list"
  #
  # - When listing the 'invitations masks' for a given channel,
  # a server is required to send the list back using the
  # RPL_INVITELIST and RPL_ENDOFINVITELIST messages.  A
  # separate RPL_INVITELIST is sent for each active mask.
  # After the masks have been listed (or if none present) a
  # RPL_ENDOFINVITELIST MUST be sent.
  #
  RPL_EXCEPTLIST=348
  # "<channel> <exceptionmask>"
  RPL_ENDOFEXCEPTLIST=349
  # "<channel> :End of channel exception list"
  #
  # - When listing the 'exception masks' for a given channel,
  # a server is required to send the list back using the
  # RPL_EXCEPTLIST and RPL_ENDOFEXCEPTLIST messages.  A
  # separate RPL_EXCEPTLIST is sent for each active mask.
  # After the masks have been listed (or if none present)
  # a RPL_ENDOFEXCEPTLIST MUST be sent.
  #
  RPL_VERSION=351
  # "<version>.<debuglevel> <server> :<comments>"
  #
  # - Reply by the server showing its version details.
  # The <version> is the version of the software being
  # used (including any patchlevel revisions) and the
  # <debuglevel> is used to indicate if the server is
  # running in "debug mode".
  #
  # The "comments" field may contain any comments about
  # the version or further version details.
  #
  RPL_WHOREPLY=352
  # "<channel> <user> <host> <server> <nick>
  # ( "H" / "G" > ["*"] [ ( "@" / "+" ) ]
  # :<hopcount> <real name>"
  #
  RPL_ENDOFWHO=315
  # "<name> :End of WHO list"
  #
  # - The RPL_WHOREPLY and RPL_ENDOFWHO pair are used
  # to answer a WHO message.  The RPL_WHOREPLY is only
  # sent if there is an appropriate match to the WHO
  # query.  If there is a list of parameters supplied
  # with a WHO message, a RPL_ENDOFWHO MUST be sent
  # after processing each list item with <name> being
  # the item.
  #
  RPL_NAMREPLY=353
  # "( "=" / "*" / "@" ) <channel>
  # :[ "@" / "+" ] <nick> *( " " [ "@" / "+" ] <nick> )
  # - "@" is used for secret channels, "*" for private
  # channels, and "=" for others (public channels).
  #
  RPL_ENDOFNAMES=366
  # "<channel> :End of NAMES list"
  #
  # - To reply to a NAMES message, a reply pair consisting
  # of RPL_NAMREPLY and RPL_ENDOFNAMES is sent by the
  # server back to the client.  If there is no channel
  # found as in the query, then only RPL_ENDOFNAMES is
  # returned.  The exception to this is when a NAMES
  # message is sent with no parameters and all visible
  # channels and contents are sent back in a series of
  # RPL_NAMEREPLY messages with a RPL_ENDOFNAMES to mark
  # the end.
  #
  RPL_LINKS=364
  # "<mask> <server> :<hopcount> <server info>"
  RPL_ENDOFLINKS=365
  # "<mask> :End of LINKS list"
  #
  # - In replying to the LINKS message, a server MUST send
  # replies back using the RPL_LINKS numeric and mark the
  # end of the list using an RPL_ENDOFLINKS reply.
  #
  RPL_BANLIST=367
  # "<channel> <banmask>"
  RPL_ENDOFBANLIST=368
  # "<channel> :End of channel ban list"
  #
  # - When listing the active 'bans' for a given channel,
  # a server is required to send the list back using the
  # RPL_BANLIST and RPL_ENDOFBANLIST messages.  A separate
  # RPL_BANLIST is sent for each active banmask.  After the
  # banmasks have been listed (or if none present) a
  # RPL_ENDOFBANLIST MUST be sent.
  #
  RPL_INFO=371
  # ":<string>"
  RPL_ENDOFINFO=374
  # ":End of INFO list"
  #
  # - A server responding to an INFO message is required to
  # send all its 'info' in a series of RPL_INFO messages
  # with a RPL_ENDOFINFO reply to indicate the end of the
  # replies.
  #
  RPL_MOTDSTART=375
  # ":- <server> Message of the day - "
  RPL_MOTD=372
  # ":- <text>"
  RPL_ENDOFMOTD=376
  # ":End of MOTD command"
  #
  # - When responding to the MOTD message and the MOTD file
  # is found, the file is displayed line by line, with
  # each line no longer than 80 characters, using
  # RPL_MOTD format replies.  These MUST be surrounded
  # by a RPL_MOTDSTART (before the RPL_MOTDs) and an
  # RPL_ENDOFMOTD (after).
  #
  RPL_YOUREOPER=381
  # ":You are now an IRC operator"
  #
  # - RPL_YOUREOPER is sent back to a client which has
  # just successfully issued an OPER message and gained
  # operator status.
  #
  RPL_REHASHING=382
  # "<config file> :Rehashing"
  #
  # - If the REHASH option is used and an operator sends
  # a REHASH message, an RPL_REHASHING is sent back to
  # the operator.
  #
  RPL_YOURESERVICE=383
  # "You are service <servicename>"
  #
  # - Sent by the server to a service upon successful
  # registration.
  #
  RPL_TIME=391
  # "<server> :<string showing server's local time>"
  #
  # - When replying to the TIME message, a server MUST send
  # the reply using the RPL_TIME format above.  The string
  # showing the time need only contain the correct day and
  # time there.  There is no further requirement for the
  # time string.
  #
  RPL_USERSSTART=392
  # ":UserID   Terminal  Host"
  RPL_USERS=393
  # ":<username> <ttyline> <hostname>"
  RPL_ENDOFUSERS=394
  # ":End of users"
  RPL_NOUSERS=395
  # ":Nobody logged in"
  #
  # - If the USERS message is handled by a server, the
  # replies RPL_USERSTART, RPL_USERS, RPL_ENDOFUSERS and
  # RPL_NOUSERS are used.  RPL_USERSSTART MUST be sent
  # first, following by either a sequence of RPL_USERS
  # or a single RPL_NOUSER.  Following this is
  # RPL_ENDOFUSERS.
  #
  RPL_TRACELINK=200
  # "Link <version & debug level> <destination>
  # <next server> V<protocol version>
  # <link uptime in seconds> <backstream sendq>
  # <upstream sendq>"
  RPL_TRACECONNECTING=201
  # "Try. <class> <server>"
  RPL_TRACEHANDSHAKE=202
  # "H.S. <class> <server>"
  RPL_TRACEUNKNOWN=203
  # "???? <class> [<client IP address in dot form>]"
  RPL_TRACEOPERATOR=204
  # "Oper <class> <nick>"
  RPL_TRACEUSER=205
  # "User <class> <nick>"
  RPL_TRACESERVER=206
  # "Serv <class> <int>S <int>C <server>
  # <nick!user|*!*>@<host|server> V<protocol version>"
  RPL_TRACESERVICE=207
  # "Service <class> <name> <type> <active type>"
  RPL_TRACENEWTYPE=208
  # "<newtype> 0 <client name>"
  RPL_TRACECLASS=209
  # "Class <class> <count>"
  RPL_TRACERECONNECT=210
  # Unused.
  RPL_TRACELOG=261
  # "File <logfile> <debug level>"
  RPL_TRACEEND=262
  # "<server name> <version & debug level> :End of TRACE"
  #
  # - The RPL_TRACE* are all returned by the server in
  # response to the TRACE message.  How many are
  # returned is dependent on the TRACE message and
  # whether it was sent by an operator or not.  There
  # is no predefined order for which occurs first.
  # Replies RPL_TRACEUNKNOWN, RPL_TRACECONNECTING and
  # RPL_TRACEHANDSHAKE are all used for connections
  # which have not been fully established and are either
  # unknown, still attempting to connect or in the
  # process of completing the 'server handshake'.
  # RPL_TRACELINK is sent by any server which handles
  # a TRACE message and has to pass it on to another
  # server.  The list of RPL_TRACELINKs sent in
  # response to a TRACE command traversing the IRC
  # network should reflect the actual connectivity of
  # the servers themselves along that path.
  #
  # RPL_TRACENEWTYPE is to be used for any connection
  # which does not fit in the other categories but is
  # being displayed anyway.
  # RPL_TRACEEND is sent to indicate the end of the list.
  #
  RPL_LOCALUSERS=265
  # ":Current local  users: 3  Max: 4"
  RPL_GLOBALUSERS=266
  # ":Current global users: 3  Max: 4"
  RPL_STATSCONN=250
  # "::Highest connection count: 4 (4 clients) (251 since server was
  # (re)started)"
  RPL_STATSLINKINFO=211
  # "<linkname> <sendq> <sent messages>
  # <sent Kbytes> <received messages>
  # <received Kbytes> <time open>"
  #
  # - reports statistics on a connection.  <linkname>
  # identifies the particular connection, <sendq> is
  # the amount of data that is queued and waiting to be
  # sent <sent messages> the number of messages sent,
  # and <sent Kbytes> the amount of data sent, in
  # Kbytes. <received messages> and <received Kbytes>
  # are the equivalent of <sent messages> and <sent
  # Kbytes> for received data, respectively.  <time
  # open> indicates how long ago the connection was
  # opened, in seconds.
  #
  RPL_STATSCOMMANDS=212
  # "<command> <count> <byte count> <remote count>"
  #
  # - reports statistics on commands usage.
  #
  RPL_ENDOFSTATS=219
  # "<stats letter> :End of STATS report"
  #
  RPL_STATSUPTIME=242
  # ":Server Up %d days %d:%02d:%02d"
  #
  # - reports the server uptime.
  #
  RPL_STATSOLINE=243
  # "O <hostmask> * <name>"
  #
  # - reports the allowed hosts from where user may become IRC
  # operators.
  #
  RPL_UMODEIS=221
  # "<user mode string>"
  #
  # - To answer a query about a client's own mode,
  # RPL_UMODEIS is sent back.
  #
  RPL_SERVLIST=234
  # "<name> <server> <mask> <type> <hopcount> <info>"
  #
  RPL_SERVLISTEND=235
  # "<mask> <type> :End of service listing"
  #
  # - When listing services in reply to a SERVLIST message,
  # a server is required to send the list back using the
  # RPL_SERVLIST and RPL_SERVLISTEND messages.  A separate
  # RPL_SERVLIST is sent for each service.  After the
  # services have been listed (or if none present) a
  # RPL_SERVLISTEND MUST be sent.
  #
  RPL_LUSERCLIENT=251
  # ":There are <integer> users and <integer>
  # services on <integer> servers"
  RPL_LUSEROP=252
  # "<integer> :operator(s) online"
  RPL_LUSERUNKNOWN=253
  # "<integer> :unknown connection(s)"
  RPL_LUSERCHANNELS=254
  # "<integer> :channels formed"
  RPL_LUSERME=255
  # ":I have <integer> clients and <integer>
  # servers"
  #
  # - In processing an LUSERS message, the server
  # sends a set of replies from RPL_LUSERCLIENT,
  # RPL_LUSEROP, RPL_USERUNKNOWN,
  # RPL_LUSERCHANNELS and RPL_LUSERME.  When
  # replying, a server MUST send back
  # RPL_LUSERCLIENT and RPL_LUSERME.  The other
  # replies are only sent back if a non-zero count
  # is found for them.
  #
  RPL_ADMINME=256
  # "<server> :Administrative info"
  RPL_ADMINLOC1=257
  # ":<admin info>"
  RPL_ADMINLOC2=258
  # ":<admin info>"
  RPL_ADMINEMAIL=259
  # ":<admin info>"
  #
  # - When replying to an ADMIN message, a server
  # is expected to use replies RPL_ADMINME
  # through to RPL_ADMINEMAIL and provide a text
  # message with each.  For RPL_ADMINLOC1 a
  # description of what city, state and country
  # the server is in is expected, followed by
  # details of the institution (RPL_ADMINLOC2)
  # and finally the administrative contact for the
  # server (an email address here is REQUIRED)
  # in RPL_ADMINEMAIL.
  #
  RPL_TRYAGAIN=263
  # "<command> :Please wait a while and try again."
  #
  # - When a server drops a command without processing it,
  # it MUST use the reply RPL_TRYAGAIN to inform the
  # originating client.
  #
  # 5.2 Error Replies
  #
  # Error replies are found in the range from 400 to 599.
  #
  ERR_NOSUCHNICK=401
  # "<nickname> :No such nick/channel"
  #
  # - Used to indicate the nickname parameter supplied to a
  # command is currently unused.
  #
  ERR_NOSUCHSERVER=402
  # "<server name> :No such server"
  #
  # - Used to indicate the server name given currently
  # does not exist.
  #
  ERR_NOSUCHCHANNEL=403
  # "<channel name> :No such channel"
  #
  # - Used to indicate the given channel name is invalid.
  #
  ERR_CANNOTSENDTOCHAN=404
  # "<channel name> :Cannot send to channel"
  #
  # - Sent to a user who is either (a) not on a channel
  # which is mode +n or (b) not a chanop (or mode +v) on
  # a channel which has mode +m set or where the user is
  # banned and is trying to send a PRIVMSG message to
  # that channel.
  #
  ERR_TOOMANYCHANNELS=405
  # "<channel name> :You have joined too many channels"
  #
  # - Sent to a user when they have joined the maximum
  # number of allowed channels and they try to join
  # another channel.
  #
  ERR_WASNOSUCHNICK=406
  # "<nickname> :There was no such nickname"
  #
  # - Returned by WHOWAS to indicate there is no history
  # information for that nickname.
  #
  ERR_TOOMANYTARGETS=407
  # "<target> :<error code> recipients. <abort message>"
  #
  # - Returned to a client which is attempting to send a
  # PRIVMSG/NOTICE using the user@host destination format
  # and for a user@host which has several occurrences.
  #
  # - Returned to a client which trying to send a
  # PRIVMSG/NOTICE to too many recipients.
  #
  # - Returned to a client which is attempting to JOIN a safe
  # channel using the shortname when there are more than one
  # such channel.
  #
  ERR_NOSUCHSERVICE=408
  # "<service name> :No such service"
  #
  # - Returned to a client which is attempting to send a SQUERY
  # to a service which does not exist.
  #
  ERR_NOORIGIN=409
  # ":No origin specified"
  #
  # - PING or PONG message missing the originator parameter.
  #
  ERR_NORECIPIENT=411
  # ":No recipient given (<command>)"
  ERR_NOTEXTTOSEND=412
  # ":No text to send"
  ERR_NOTOPLEVEL=413
  # "<mask> :No toplevel domain specified"
  ERR_WILDTOPLEVEL=414
  # "<mask> :Wildcard in toplevel domain"
  ERR_BADMASK=415
  # "<mask> :Bad Server/host mask"
  #
  # - 412 - 415 are returned by PRIVMSG to indicate that
  # the message wasn't delivered for some reason.
  # ERR_NOTOPLEVEL and ERR_WILDTOPLEVEL are errors that
  # are returned when an invalid use of
  # "PRIVMSG $<server>" or "PRIVMSG #<host>" is attempted.
  #
  ERR_UNKNOWNCOMMAND=421
  # "<command> :Unknown command"
  #
  # - Returned to a registered client to indicate that the
  # command sent is unknown by the server.
  #
  ERR_NOMOTD=422
  # ":MOTD File is missing"
  #
  # - Server's MOTD file could not be opened by the server.
  #
  ERR_NOADMININFO=423
  # "<server> :No administrative info available"
  #
  # - Returned by a server in response to an ADMIN message
  # when there is an error in finding the appropriate
  # information.
  #
  ERR_FILEERROR=424
  # ":File error doing <file op> on <file>"
  #
  # - Generic error message used to report a failed file
  # operation during the processing of a message.
  #
  ERR_NONICKNAMEGIVEN=431
  # ":No nickname given"
  #
  # - Returned when a nickname parameter expected for a
  # command and isn't found.
  #
  ERR_ERRONEUSNICKNAME=432
  # "<nick> :Erroneous nickname"
  #
  # - Returned after receiving a NICK message which contains
  # characters which do not fall in the defined set.  See
  # section 2.3.1 for details on valid nicknames.
  #
  ERR_NICKNAMEINUSE=433
  # "<nick> :Nickname is already in use"
  #
  # - Returned when a NICK message is processed that results
  # in an attempt to change to a currently existing
  # nickname.
  #
  ERR_NICKCOLLISION=436
  # "<nick> :Nickname collision KILL from <user>@<host>"
  #
  # - Returned by a server to a client when it detects a
  # nickname collision (registered of a NICK that
  # already exists by another server).
  #
  ERR_UNAVAILRESOURCE=437
  # "<nick/channel> :Nick/channel is temporarily unavailable"
  #
  # - Returned by a server to a user trying to join a channel
  # currently blocked by the channel delay mechanism.
  #
  # - Returned by a server to a user trying to change nickname
  # when the desired nickname is blocked by the nick delay
  # mechanism.
  #
  ERR_USERNOTINCHANNEL=441
  # "<nick> <channel> :They aren't on that channel"
  #
  # - Returned by the server to indicate that the target
  # user of the command is not on the given channel.
  #
  ERR_NOTONCHANNEL=442
  # "<channel> :You're not on that channel"
  #
  # - Returned by the server whenever a client tries to
  # perform a channel affecting command for which the
  # client isn't a member.
  #
  ERR_USERONCHANNEL=443
  # "<user> <channel> :is already on channel"
  #
  # - Returned when a client tries to invite a user to a
  # channel they are already on.
  #
  ERR_NOLOGIN=444
  # "<user> :User not logged in"
  #
  # - Returned by the summon after a SUMMON command for a
  # user was unable to be performed since they were not
  # logged in.
  #
  #
  ERR_SUMMONDISABLED=445
  # ":SUMMON has been disabled"
  #
  # - Returned as a response to the SUMMON command.  MUST be
  # returned by any server which doesn't implement it.
  #
  ERR_USERSDISABLED=446
  # ":USERS has been disabled"
  #
  # - Returned as a response to the USERS command.  MUST be
  # returned by any server which does not implement it.
  #
  ERR_NOTREGISTERED=451
  # ":You have not registered"
  #
  # - Returned by the server to indicate that the client
  # MUST be registered before the server will allow it
  # to be parsed in detail.
  #
  ERR_NEEDMOREPARAMS=461
  # "<command> :Not enough parameters"
  #
  # - Returned by the server by numerous commands to
  # indicate to the client that it didn't supply enough
  # parameters.
  #
  ERR_ALREADYREGISTRED=462
  # ":Unauthorized command (already registered)"
  #
  # - Returned by the server to any link which tries to
  # change part of the registered details (such as
  # password or user details from second USER message).
  #
  ERR_NOPERMFORHOST=463
  # ":Your host isn't among the privileged"
  #
  # - Returned to a client which attempts to register with
  # a server which does not been setup to allow
  # connections from the host the attempted connection
  # is tried.
  #
  ERR_PASSWDMISMATCH=464
  # ":Password incorrect"
  #
  # - Returned to indicate a failed attempt at registering
  # a connection for which a password was required and
  # was either not given or incorrect.
  #
  ERR_YOUREBANNEDCREEP=465
  # ":You are banned from this server"
  #
  # - Returned after an attempt to connect and register
  # yourself with a server which has been setup to
  # explicitly deny connections to you.
  #
  ERR_YOUWILLBEBANNED=466
  #
  # - Sent by a server to a user to inform that access to the
  # server will soon be denied.
  #
  ERR_KEYSET=467
  # "<channel> :Channel key already set"
  ERR_CHANNELISFULL=471
  # "<channel> :Cannot join channel (+l)"
  ERR_UNKNOWNMODE=472
  # "<char> :is unknown mode char to me for <channel>"
  ERR_INVITEONLYCHAN=473
  # "<channel> :Cannot join channel (+i)"
  ERR_BANNEDFROMCHAN=474
  # "<channel> :Cannot join channel (+b)"
  ERR_BADCHANNELKEY=475
  # "<channel> :Cannot join channel (+k)"
  ERR_BADCHANMASK=476
  # "<channel> :Bad Channel Mask"
  ERR_NOCHANMODES=477
  # "<channel> :Channel doesn't support modes"
  ERR_BANLISTFULL=478
  # "<channel> <char> :Channel list is full"
  #
  ERR_NOPRIVILEGES=481
  # ":Permission Denied- You're not an IRC operator"
  #
  # - Any command requiring operator privileges to operate
  # MUST return this error to indicate the attempt was
  # unsuccessful.
  #
  ERR_CHANOPRIVSNEEDED=482
  # "<channel> :You're not channel operator"
  #
  # - Any command requiring 'chanop' privileges (such as
  # MODE messages) MUST return this error if the client
  # making the attempt is not a chanop on the specified
  # channel.
  #
  #
  ERR_CANTKILLSERVER=483
  # ":You can't kill a server!"
  #
  # - Any attempts to use the KILL command on a server
  # are to be refused and this error returned directly
  # to the client.
  #
  ERR_RESTRICTED=484
  # ":Your connection is restricted!"
  #
  # - Sent by the server to a user upon connection to indicate
  # the restricted nature of the connection (user mode "+r").
  #
  ERR_UNIQOPPRIVSNEEDED=485
  # ":You're not the original channel operator"
  #
  # - Any MODE requiring "channel creator" privileges MUST
  # return this error if the client making the attempt is not
  # a chanop on the specified channel.
  #
  ERR_NOOPERHOST=491
  # ":No O-lines for your host"
  #
  # - If a client sends an OPER message and the server has
  # not been configured to allow connections from the
  # client's host as an operator, this error MUST be
  # returned.
  #
  ERR_UMODEUNKNOWNFLAG=501
  # ":Unknown MODE flag"
  #
  # - Returned by the server to indicate that a MODE
  # message was sent with a nickname parameter and that
  # the a mode flag sent was not recognized.
  #
  ERR_USERSDONTMATCH=502
  # ":Cannot change mode for other users"
  #
  # - Error sent to any user trying to view or change the
  # user mode for a user other than themselves.
  #
  # 5.3 Reserved numerics
  #
  # These numerics are not described above since they fall into one of
  # the following categories:
  #
  # 1. no longer in use;
  #
  # 2. reserved for future planned use;
  #
  # 3. in current use but are part of a non-generic 'feature' of
  # the current IRC server.
  RPL_SERVICEINFO=231
  RPL_ENDOFSERVICES=232
  RPL_SERVICE=233
  RPL_NONE=300
  RPL_WHOISCHANOP=316
  RPL_KILLDONE=361
  RPL_CLOSING=362
  RPL_CLOSEEND=363
  RPL_INFOSTART=373
  RPL_MYPORTIS=384
  RPL_STATSCLINE=213
  RPL_STATSNLINE=214
  RPL_STATSILINE=215
  RPL_STATSKLINE=216
  RPL_STATSQLINE=217
  RPL_STATSYLINE=218
  RPL_STATSVLINE=240
  RPL_STATSLLINE=241
  RPL_STATSHLINE=244
  RPL_STATSSLINE=244
  RPL_STATSPING=246
  RPL_STATSBLINE=247
  ERR_NOSERVICEHOST=492

  # implements RFC 2812 and prior IRC RFCs.
  # clients register handler proc{}s for different server events and IrcClient
  # handles dispatch
  class IrcClient
    # create a new IrcClient instance
    def initialize
      @handlers = Hash.new
      @users = Array.new
    end

    # key::   server event to handle
    # value:: proc object called when event occurs
    # set a handler for a server event
    #
    # ==server events currently supported:
    #
    # created::     when the server was started
    # yourhost::    your host details (on connection)
    # ping::        server pings you (default handler returns a pong)
    # nicktaken::   you tried to change nick to one that's in use
    # badnick::     you tried to change nick to one that's invalid
    # topic::       someone changed the topic of a channel
    # topicinfo::   on joining a channel or asking for the topic, tells you
    #               who set it and when
    # names::       server sends list of channel members when you join
    # welcome::     server welcome message on connect
    # motd::        server message of the day
    # privmsg::     privmsg, the core of IRC, a message to you from someone
    # public::      optionally instead of getting privmsg you can hook to only
    #               the public ones...
    # msg::         or only the private ones, or both
    # kick::        someone got kicked from a channel
    # part::        someone left a channel
    # quit::        someone quit IRC
    # join::        someone joined a channel
    # changetopic:: the topic of a channel changed
    # invite::      you are invited to a channel
    # nick::        someone changed their nick
    # mode::        a mode change
    # notice::      someone sends you a notice
    # unknown::     any other message not handled by the above
    def []=(key, value)
      @handlers[key] = value
    end

    # key:: event name
    # remove a handler for a server event
    def deletehandler(key)
      @handlers.delete(key)
    end

    # takes a server string, checks for PING, PRIVMSG, NOTIFY, etc, and parses
    # numeric server replies, calling the appropriate handler for each, and
    # sending it a hash containing the data from the server
    def process(serverstring)
      data = Hash.new
      data[:serverstring] = serverstring

      unless serverstring =~ /^(:(\S+)\s)?(\S+)(\s(.*))?/
        raise "Unparseable Server Message!!!: #{serverstring}"
      end

      prefix, command, params = $2, $3, $5

      if prefix != nil
        data[:source] = prefix
        if prefix =~ /^(\S+)!(\S+)$/
          data[:sourcenick] = $1
          data[:sourceaddress] = $2
        end
      end

      # split parameters in an array
      argv = []
      params.scan(/(?!:)(\S+)|:(.*)/) { argv << ($1 || $2) } if params

      case command
      when 'PING'
        data[:pingid] = argv[0]
        handle(:ping, data)
      when 'PONG'
        data[:pingid] = argv[0]
        handle(:pong, data)
      when /^(\d+)$/		# numeric server message
        num=command.to_i
        case num
        when RPL_YOURHOST
          # "Your host is <servername>, running version <ver>"
          # TODO how standard is this "version <ver>? should i parse it?
          data[:message] = argv[1]
          handle(:yourhost, data)
        when RPL_CREATED
          # "This server was created <date>"
          data[:message] = argv[1]
          handle(:created, data)
        when RPL_MYINFO
          # "<servername> <version> <available user modes>
          # <available channel modes>"
          data[:servername] = argv[1]
          data[:version] = argv[2]
          data[:usermodes] = argv[3]
          data[:chanmodes] = argv[4]
        when ERR_NICKNAMEINUSE
          # "* <nick> :Nickname is already in use"
          data[:nick] = argv[1]
          data[:message] = argv[2]
          handle(:nicktaken, data)
        when ERR_ERRONEUSNICKNAME
          # "* <nick> :Erroneous nickname"
          data[:nick] = argv[1]
          data[:message] = argv[2]
          handle(:badnick, data)
        when RPL_TOPIC
          data[:channel] = argv[1]
          data[:topic] = argv[2]
          handle(:topic, data)
        when RPL_TOPIC_INFO
          data[:nick] = argv[0]
          data[:channel] = argv[1]
          data[:source] = argv[2]
          data[:unixtime] = argv[3]
          handle(:topicinfo, data)
        when RPL_NAMREPLY
          # "( "=" / "*" / "@" ) <channel>
          # :[ "@" / "+" ] <nick> *( " " [ "@" / "+" ] <nick> )
          # - "@" is used for secret channels, "*" for private
          # channels, and "=" for others (public channels).
          argv[3].scan(/\S+/).each { |u|
            if(u =~ /^([@+])?(.*)$/)
              umode = $1 || ""
              user = $2
              @users << [user, umode]
            end
          }
        when RPL_ENDOFNAMES
          data[:channel] = argv[1]
          data[:users] = @users
          handle(:names, data)
          @users = Array.new
        when RPL_ISUPPORT
          # "PREFIX=(ov)@+ CHANTYPES=#& :are supported by this server"
          # "MODES=4 CHANLIMIT=#:20 NICKLEN=16 USERLEN=10 HOSTLEN=63
          # TOPICLEN=450 KICKLEN=450 CHANNELLEN=30 KEYLEN=23 CHANTYPES=#
          # PREFIX=(ov)@+ CASEMAPPING=ascii CAPAB IRCD=dancer :are available
          # on this server"
          #
          argv.each {|a|
            if a =~ /^(.*)=(.*)$/
              data[$1.downcase.to_sym] = $2
            end
          }
          handle(:isupport, data)
        when RPL_LUSERCLIENT
          # ":There are <integer> users and <integer>
          # services on <integer> servers"
          data[:message] = argv[1]
          handle(:luserclient, data)
        when RPL_LUSEROP
          # "<integer> :operator(s) online"
          data[:ops] = argv[1].to_i
          handle(:luserop, data)
        when RPL_LUSERUNKNOWN
          # "<integer> :unknown connection(s)"
          data[:unknown] = argv[1].to_i
          handle(:luserunknown, data)
        when RPL_LUSERCHANNELS
          # "<integer> :channels formed"
          data[:channels] = argv[1].to_i
          handle(:luserchannels, data)
        when RPL_LUSERME
          # ":I have <integer> clients and <integer> servers"
          data[:message] = argv[1]
          handle(:luserme, data)
        when ERR_NOMOTD
          # ":MOTD File is missing"
          data[:message] = argv[1]
          handle(:motd_missing, data)
        when RPL_LOCALUSERS
          # ":Current local  users: 3  Max: 4"
          data[:message] = argv[1]
          handle(:localusers, data)
        when RPL_GLOBALUSERS
          # ":Current global users: 3  Max: 4"
          data[:message] = argv[1]
          handle(:globalusers, data)
        when RPL_STATSCONN
          # ":Highest connection count: 4 (4 clients) (251 since server was
          # (re)started)"
          data[:message] = argv[1]
          handle(:statsconn, data)
        when RPL_WELCOME
          # "Welcome to the Internet Relay Network
          # <nick>!<user>@<host>"
          case argv[1]
          when /((\S+)!(\S+))/
            data[:netmask] = $1
            data[:nick] = $2
            data[:address] = $3
          when /Welcome to the Internet Relay Network\s(\S+)/
            data[:nick] = $1
          when /Welcome.*\s+(\S+)$/
            data[:nick] = $1
          when /^(\S+)$/
            data[:nick] = $1
          end
          handle(:welcome, data)
        when RPL_MOTDSTART
          # "<nick> :- <server> Message of the Day -"
          if argv[1] =~ /^-\s+(\S+)\s/
            server = $1
            @motd = ""
          end
        when RPL_MOTD
          if(argv[1] =~ /^-\s+(.*)$/)
            @motd << $1
            @motd << "\n"
          end
        when RPL_ENDOFMOTD
          data[:motd] = @motd
          handle(:motd, data)
        else
          handle(:unknown, data)
        end
      # end of numeric replies
      when 'PRIVMSG'
        # you can either bind to 'PRIVMSG', to get every one and
        # parse it yourself, or you can bind to 'MSG', 'PUBLIC',
        # etc and get it all nicely split up for you.
        data[:target] = argv[0]
        data[:message] = argv[1]
        handle(:privmsg, data)

        # Now we split it
        if(data[:target] =~ /^[#&!+].*/)
          handle(:public, data)
        else
          handle(:msg, data)
        end
      when 'KICK'
        data[:channel] = argv[0]
        data[:target] = argv[1]
        data[:message] = argv[2]
        handle(:kick, data)
      when 'PART'
        data[:channel] = argv[0]
        data[:message] = argv[1]
        handle(:part, data)
      when 'QUIT'
        data[:message] = argv[0]
        handle(:quit, data)
      when 'JOIN'
        data[:channel] = argv[0]
        handle(:join, data)
      when 'TOPIC'
        data[:channel] = argv[0]
        data[:topic] = argv[1]
        handle(:changetopic, data)
      when 'INVITE'
        data[:target] = argv[0]
        data[:channel] = argv[1]
        handle(:invite, data)
      when 'NICK'
        data[:nick] = argv[0]
        handle(:nick, data)
      when 'MODE'
        data[:channel] = argv[0]
        data[:modestring] = argv[1]
        data[:targets] = argv[2]
        handle(:mode, data)
      when 'NOTICE'
        data[:target] = argv[0]
        data[:message] = argv[1]
        if data[:sourcenick]
          handle(:notice, data)
        else
          # "server notice" (not from user, noone to reply to
          handle(:snotice, data)
        end
      else
        handle(:unknown, data)
      end
    end

    private

    # key::  server event name
    # data:: hash containing data about the event, passed to the proc
    # call client's proc for an event, if they set one as a handler
    def handle(key, data)
      if(@handlers.has_key?(key))
        @handlers[key].call(data)
      end
    end
  end
end